View Full Version : USB to wifi dongle
dotan_shai
23-06-2007, 07:24 PM
I've got a USB to WiFi dongle , D-LINK DWL-G122 , and I want to use with my PC so i wiil be able to connect my JASJAM anywhere in my home. I've intall it on my PC with no problems. Do someone know how to config the PC ? Do I need to config anything on the JASJAM ? I have no router involves .
karhoe
24-06-2007, 07:11 AM
You need to configure ad-hoc connection
dotan_shai
24-06-2007, 09:15 PM
I'v done so but i'm getting No connection at Wireless Network Connection 3.
Also Windows Small Office Network Wizad mention that . Any ideas how to make my D-LINK DWL-G122 connect ?
Mark Crouch
24-06-2007, 10:34 PM
Since you've got no router in your set up, you need to set your phone's wireless network connection to only use ad-hoc connections too - go to Start | Settings | Connections tab | Wi-Fi. On that screen, change the "Networks to Access" option to "All available" or "Only computer to computer".
Then you'll need to give your phone a fixed IP address in the same range as your PC; tap the Network Adapters tab, then tap the adapter that is highlighted (it will mention 802.11 and Wi-Fi in the name somewhere!). Tap on the "Use specific IP address" and then enter one in the box below - if your PC is using e.g. 192.168.0.2, then set your phone to 192.168.0.22, set the subnet mask to 255.255.0.0 and the default gateway to your PC's IP address (you can find your PC's IP address by opening a command prompt and type "ipconfig" - in case you didn't know!).
That should get you most of the way there....can't think of anything else myself, but I'll post again if anything else springs to mind :)
Mark.
dotan_shai
28-06-2007, 07:34 AM
Thnx for your help
vBulletin® v3.7.0, Copyright ©2000-2008, Jelsoft Enterprises Ltd.