Hard resetting ... from the from a factory ROM

[dwny]

If something happens to your rom where you can't boot up completely and you're on the factory ROM...do this:

To perform a hard reset

1. Press and hold the left SOFT KEY and the right SOFT KEY, and at the same time, use the stylus to press the RESET button at the middle left side of your device.

2. Release the stylus, but continue pressing the two SOFT KEYs until you see the following message on the screen:
“This operation will delete all your personal data, and reset all settings to manufacturer default.
Press Send to restore manufacturer default, or press other keys to cancel.”

3. Release the two SOFT KEYs, and then press the button on your device. Warning! Your device will be set back to factory default settings.

This was provided to me from a reliable source.

I don't have a Wing so I can't answer questions on this.
This came my way beacause my cousin overclocked his Wing too much and it would not boot.
The T-Mo ROM is not available for download to re-install it.
Because of where he works, he was able to come across this info.

I just shared it with you.

[xsign]

Thx for the info, but the manual states this as well :)

[dwny]

Thx for the info, but the manual states this as well :)

Don't own or have the device, just shared what was told to me as a fix for my cousin.

[papamopps]

Thanks - but i worte in another thread that i really hope for one thing:

Pleas - to all noobs - don´t flash ROMs or change poolsize - when you don´t know how to make a hardreset or to start your device in bootloader.

Please read, read, read - and then beginn playing when you know what you are doing.

Thanks