View Full Version : Pls help me! My atom İs dead.
monolife4
26th June 2007, 06:35 PM
My o2 atom is dead. i was yesterday upgrade o2 rom normally.. When finished unplug my atom. and turn on itself. view screen alligment but i did push cam+reset . later i saw bootlooder mod my atom. Again i d push power+reset. And my atom is not work. (dead) i m remove battery wait but not work. When i plug usb my atom s red light on. just it. if u know any repair tool software or method please tell me . :mad:
Thanks..
thaibv
3rd July 2007, 05:45 AM
Try this: Remove battery for an hour then put it back and push camera+reset. Don't push power button because it will start OS and your PDA hangs immediately.
If you can turn on your Atom by pressing camera+reset, try to reflash it.
Good luck!
alc
23rd July 2007, 06:04 PM
hi thaibv,
i woke up this morning and removed my atom exec from my connection with the usb on my computer. it immediately started rebooting several times. after this it just died. i am able to get to the bootloader, but my computer does not recognize the unit. how do i reflash if activesync won't connect? thanks for your help in advance.
al
emmzkee
23rd July 2007, 06:59 PM
hi thaibv,
i woke up this morning and removed my atom exec from my connection with the usb on my computer. it immediately started rebooting several times. after this it just died. i am able to get to the bootloader, but my computer does not recognize the unit. how do i reflash if activesync won't connect? thanks for your help in advance.
al
This has happened to me, too, and man, did I freak out! I don't exactly remember what I did but I think I first removed the battery and replaced it back. When that didn't do the trick, I did maybe 2 or 3 hard resets and then restored my backup file (learned from previous mistake already, so I regularly do backup using SPB Backup). That worked but found out something was wrong with my SMS Inbox (menu of messages won't appear; reappears when I get new SMS but as soon as I click on an old message, it disappears again). I was about to quit and called the O2 service center in my area, whose advice was for me to bring the unit to their shop so they can get a look at it. I tinkered some more with my phone (the idea of leaving my phone at the repair shop didn't exactly excite me)-- did another hard reset, re-installed the new ROM, restored my backup. Maybe I just got lucky, but I got my Atom Exec working again! Re: synchronization with Activesync, I think I made a new connection and overwrote the existing one.
alc
25th July 2007, 04:51 AM
well, i was able to get it in to the bootloader mode and reload the operating system from the SD.
thaibv
25th July 2007, 06:02 AM
To Alc,
Reload the operating system from the SD is not a good solution, I tried it several time but my Atom cannot write the OS corectly from the SD.
Try flash the OS through USB connection.
First, remove the SD and get into bootloader, then connect your PDA to PC with USB cable.
Second, go to your PC Hardware Devices and update driver for you O2 Atom as picture below.
Finaly you have your O2 connected to PC as "Microsoft USB sync" and it is ready to start The flash tool from your PC.
Good luck!
thaibv
25th July 2007, 06:13 AM
Here are the rest pictures.
Sorry Admin!
(have to post reply twice because attachment limit of 5)
vBulletin® v3.8.7, Copyright ©2000-2012, vBulletin Solutions, Inc.