HP6515 GPS & Tomtom 6

[damikey]

Question
I get the message “No GPS Device” after installing Navigator 6 on my HP iPAQ 6510 or 6515. How do I select the internal GPS receiver in my iPAQ 6510 or 6515?

Answer
To select the your HP iPAQ 6510 or 6515's internal GPS receiver using Navigator 6, see following instructions:

1. Open the File Explorer and browse to the folder Navigator.
2. Delete the file navigator (be sure not to delete the file TomTom Navigator or you will need to reinstall the application).
3. Start TomTom NAVIGATOR 6.
4. When prompted, select Other NMEA GPS receiver.
5. Set the GPS baud rate to 4800.
6. Select Internal AGPS NMEA.

[john18]

hi

you have an answer to rename the btavui but I don't know how do it?

pleas help me or

send an e-mail at : hluc12@hotmail.com

thank you

[Jakko47]

Explore your pda with active sync. Open the folder windows. Rename the file "BtCoreIf.dll". Do a soft reset and the sound should be working now.

[b0ris747]

1. Open the File Explorer and browse to the folder Navigator.
2. Delete the file navigator (be sure not to delete the file TomTom Navigator or you will need to reinstall the application).
3. Start TomTom NAVIGATOR 6.
4. When prompted, select Other NMEA GPS receiver.
5. Set the GPS baud rate to 4800.
6. Select Internal AGPS NMEA.


COM7: (maybe Other NMEA receiver, I don't know) at 57600 bauds.

The ipaq internal GPS is weird, and will be activated ONLY with the correct speed. Real port is on COM7: and using 57600 bauds speed

COM4: should work too, but seem to be linked with AGPS, which require EDGE or GPRS connection.

[keithrutter9]

I was following the link above. I have just installed TomTom 6 on my HW6510. I can get the sound working by renaming the file above. However I can't select the internal GPS receiver by following the instructions. I deleted the file Navigator (under the directory navigator) - on restarting TomTom this just asks me for preferences (language, left / right handed etc..) it does not give me any options for selecting the receiver.
I must be missing something but don't know what.
Any help would be appreciated.

[Macgyvec3]

I was following the link above. I have just installed TomTom 6 on my HW6510. I can get the sound working by renaming the file above. However I can't select the internal GPS receiver by following the instructions. I deleted the file Navigator (under the directory navigator) - on restarting TomTom this just asks me for preferences (language, left / right handed etc..) it does not give me any options for selecting the receiver.
I must be missing something but don't know what.
Any help would be appreciated.

Hard reset. Then make sure you have an up-to-date version of Tomtom 6. The first release wouldn't let you choose it as you first install it. In that version you would have to go to change preferences and find it in there. It wasn't hard but it was well hidden. If you have an up to date version it will ask you right when it installs. Good luck.

[nookief]

i dunno why , but my hp doesn't show com 7 anywhere. there are com 1, 4,5 and 9. but not 7