View Full Version : ATOMs..DOWNGRADE ROM
serialzs
1st July 2007, 05:26 AM
@all
anyone have a solution on how to downgrade rom..
i have a ATOM and upgraded to ATOM EXEC rom..
theres some guide in here but its inside of other thread and its not working..:mad:
please help us..i know im not the only one have a problem like this..
thanks in advance..
-=[serialzs]=-
jiggs
1st July 2007, 08:14 AM
If you have Atom Exec ROM, then the bootloader keys are Camera+Reset. If you can enter bootloader, you can now upgrade to the usual XDA Atom ROM.
Cheers,
Jiggs
serialzs
1st July 2007, 04:52 PM
If you have Atom Exec ROM, then the bootloader keys are Camera+Reset. If you can enter bootloader, you can now upgrade to the usual XDA Atom ROM.
Cheers,
Jiggs
where i can put the bootloader? can you help me? please..
-=[serialzs]=-
jiggs
1st July 2007, 05:19 PM
where i can put the bootloader? can you help me? please..
-=[serialzs]=-
press camera+reset button. you should see bootloader screen. From here, upgrade using the procedure I discussed in the aku3.3 thread.
cheers,
Jiggs
serialzs
1st July 2007, 05:57 PM
thanks for the help but i figure it out on my own now..i done it with something i dont think earlier because im too excited..hehe..
now i have a atom rom back again..:D
i will guide people have same problem..hope i can help..
-=[serialzs]=-
all_brother2002
5th July 2007, 10:08 PM
hi
i need ur help
i have o2 atom i upgrade to exec now i can not go back
it give me error in connection
please help
serialzs
6th July 2007, 01:17 AM
hi
i need ur help
i have o2 atom i upgrade to exec now i can not go back
it give me error in connection
please help
what version of atom exec you use?
-=[serialzs]=-
Ultimate Chicken
7th July 2007, 06:54 AM
Well, I managed to downgrade my ROM back to the original Atom (my sig isn't updated - had problems with the extROM wiping itself) - but I was kinda lucky.
Y'see, the AE hack rom I use has an updated bootloader that won't let you do a USB firmware update unless you're activesync'd.
The only way to solve an ExtROM wipe was to reflash the device, so I did. Using the hack ROM DSUU - at this point, the original ROM won't recognize the device - I found that it usually takes a few tries for the extROM update to go through (extROM format fail) - when it fails, your phone will be stuck in bootloader (Connect a USB cable). Repeated attempts to flash the phone solves the problem.
So when my extROM inevitably disappeared again, and I hit the extROM format fail again, I decided I had enough and tried using the original Atom0426-0822 ROM.
It went through this time.
Seems that the only way to bypass the bootloader lock is to semi-brick your device. >_>
viperx
1st August 2007, 11:37 AM
Just a question to all of you who are more experienced than me
I want to change my atom exec wwe to cht, can anyone tell me how to bypass the device country id error. do i use an spl? and are these spl programs device specific? or do i use the bootloader mode? Can someone explain that to me?
Thanks all in advance.
Ultimate Chicken
2nd August 2007, 03:42 AM
Bootloader mode works as long as you aren't using the Atom Exec hacked ROM (bootloader will tell you to use Async if you try). To upgrade, go into the bootloader, connect via USB, and run the DSUU from the computer.
You know you did it correctly when your unit's current firmware information is read as "0" by the DSUU/
viperx
2nd August 2007, 03:58 PM
Bootloader mode works as long as you aren't using the Atom Exec hacked ROM (bootloader will tell you to use Async if you try). To upgrade, go into the bootloader, connect via USB, and run the DSUU from the computer.
You know you did it correctly when your unit's current firmware information is read as "0" by the DSUU/
Strange, i already did that, and got the "0" from DSUU, but when i start upgrading, the bootloader spits out a message saying that i should connect with OS mode.
Anyway, I've edited the diskimage_Ver.nb0 file to do it.
bedav
20th September 2007, 07:07 PM
Hi,
I have the same problem :
- bootloader : ok
- firmware 0 : ok
but connection error !
Do you have an idea ?
Thanks a lot.
ericj
20th September 2007, 07:17 PM
Hi,
I have the same problem :
- bootloader : ok
- firmware 0 : ok
but connection error !
Do you have an idea ?
Thanks a lot.
Hi guy the main key on the file call EBOOT everytime when you want dowgrade your OS to normal ATOM just put this file to you SD card then use the bootloader mode you can see "imge downloading" just wait for a second it will reboot again . then you can use the DSU mode to flash your device
bedav
20th September 2007, 09:09 PM
thats work !
Thank you very much !
donkeanu
7th January 2009, 12:37 PM
w/o reading, i downgraded my atom exec to atom...
hw can i bring back my atom exec default WM5 ROM?...
am planning to upgrde to WM6 aftr...
vBulletin® v3.8.7, Copyright ©2000-2012, vBulletin Solutions, Inc.