Official Kitchen Pantry Thread

[jwzg]

A great idea was brought to my attention by DaKender and rather than wait on a poll to fill in, I thought I'd just go ahead and start it.

This thread is only for the request and posting of working packages for kitchens. A great place to learn how to make packages is here.
http://forum.xda-developers.com/showthread.php?t=303195

Kitchen authors, please PM me with posts that can be moved into this thread so you can keep your kitchen threads cleaner and answer tech questions.

If you are posting a package:

1) Packages may only consist of free software or software embedded in a factory ROM.

2) Package(s) must work and have been used by the poster in cooking a ROM. Please state the kitchen you used.

3) Uploads must be named according to contents (i.e. Compressed_Office_2007_for_318_build.zip).

4) You must state the contents of the package in your post. Not every little thing but enough for a person to make an informed decision to use the package or not. Packages do not have to include an option.xml file. However, they must include an initfileflashes.dat as well as .rgu and .dsm files.

5) If your package is too big, please use the uploads/Wizard section of the FTP to post and post the link.

If you are posting a request:

1) Click on the paperclip icon on the main forum page next to this thread to see if a package you are requesting has already been posted. This is the most important rule!

2) Include requests for multiple packages in a single post. No need in cluttering the thread with multiple requests by the same person.

Please keep this thread clean. Useless or off-topic posts will be promptly deleted.

[jwzg]

FTP Kitchen Pantry is now open. Please upload packages to there. The address is: ftp://xdaupload:xda:@ftp.xda-developers.com/Uploads/WIZARD/Kitchen_Pantry

[duke_stix]

Requesting packages for:

Mobireader
SPB Mobile Shell v1.5
Coreplayer v1.04
HTC X-Button-task manager (drop down menu one)

i can provide cab's if necessary. im at college right now so will edit the post later on tonight!

thanx

[jwzg]

Uploaded to the ftp server are the working VoIP packages for WM6. The zip file contains 2 packages which were used to cook my latest ROM in double_ofour's kitchen. No initflashfiles.dat is needed because these are SYS modules.

Link:
ftp://xda:xda@ftp.xda-developers.com/Uploads/WIZARD/Kitchen_Pantry/VoIP.zip

[anichillus]

This is a great idea to have an "almighty" thread with all packages around here in one place. I also agree with the idea of requesting packages and fulfilling requests.

I don't understand why people won't cooperate. Unfortunately i don't have any packs on my PC, but i will contribute as soon as possible.

Cheers !

[jwzg]

Here's a working package with .NETCF2 SP2. Works in double_ofour's kitchen. .zip file contains one package. There are no modules in this package as in the original.

ftp://xda:xda@ftp.xda-developers.com/Uploads/WIZARD/Kitchen_Pantry/NetCF2_sp2.zip

[DaKender]

FTP Kitchen Pantry is now open. Please upload packages to there. The address is: ftp://xdaupload:xda:@ftp.xda-developers.com/Uploads/WIZARD/Kitchen_Pantry

Just wanted to say "THANK YOU" for doing this. I just wish I had the time and knowledge to do it. Will do my best to help contribute, just a busy time at work during the summer season, feel like the one legged man in a butt kicking contest lately....... :D If I can help out in any way, just let me know, I'll do my best.

DaKender

[Janis]

I'm understanding the 54-ish mb ROM limit, but Can anyone off the top of their heads say how that breaks down system vs. extras? What the OEM folder size limit? How much memory does it actually save to put less stuff in the OEM, all? None? some? How different is the TouchMyCube built in, size-wise. Anyone tried sticking in the cube after flashing?

OK, this went a little too far, but it would be nice to benefit from experience rather than fumble around trying something new (there I go again).

I think it's a stitch that people are flashing using mirrors....

BTW, I'm working on a cab list for the pantry so people can taste before they buy. Feel free to PM me if you know one that probably isn't posted or might be hard to find. (Got the ArcSoft MMS; thx Ingenetics for asking for it.)
(Up to interpretation: :p)

[jwzg]

You can eliminate packages from either side, so the question might possibly be. "What packages can be deleted from the SYS folder to make room for additional OEM folder items?" Many people have removed VoIP, Catalog(ue), Voice Command, Windows Live, Autoupdate and Office Mobile to name most. All but Autoupdate and Catalog(ue) are deleted or have different versions placed in the various official ROM's. It's really a zero-sum game adding and subtracting packages.

[Janis]

After cooking a couple roms (nothing special, nor would I want to publish them as they are, but working on it) I'm pretty convinced that the more there is in the Windows directory the slower the OS. I did a bunch of the regedits manually b4 build instead of using rgus and deleted Adobe, replaced it w/ Xpdf (1/3 the size & I like it better, plus the source code is available) and MS Voice Command and got a substantial performance difference, subjectively, even after installing lots and lots of other crap (Cyberon Voice dial & commander, gigantic spb stuff, pocket informant... locally (\Program Files and on card). What softwate do people use for benchmarking?

[allan1]

Any chance we could get one of these threads in the Hermes WM6 forum. There
seems to be a lot of interest in home cooking right now with the release of Core and Pandora kitchens.

[jwzg]

I've uploaded four new packages today.

Office 2 k 7 Compressed for Build 318: The exe's only have been compressed. This package integrates the fix needed to make 2 k 7 run on versions of WM6 that do not already have it. It was used to cook my own ROM. It contains no initflashfiles.dat.

ftp://xda:xda@ftp.xda-developers.com/Uploads/WIZARD/Kitchen_Pantry/Office_2007_Compressed.zip

[jwzg]

Windows Live Search: Latest version (I think). Contains initflashfiles.dat and shortcuts.

ftp://xda:xda@ftp.xda-developers.com/Uploads/WIZARD/Kitchen_Pantry/Live Search.zip

[jwzg]

Esmertec Java: Version comes from the Herald. I'll edit the post after a while to give numbers. Contains initflashfiles.dat and shortcuts.

ftp://xda:xda@ftp.xda-developers.com/Uploads/WIZARD/Kitchen_Pantry/Esmertec Java.zip

[epimazzo]

Hey Jwgz!
How's going btw?

I'm almost releasing my own ROM finally! Have been cooking so many ROM's with so many different kitchens and I think I can upload a few functional OEM packages! But It will be directly via upload link at our FTP server.

So, preparing and update news later when I finish!:p

Good initiative !:D

Rgs,:cool:

[ai6908]

Can somebody please upload xpdf package. I am looking for files to cook in a ROM, not the cab file. Thanks in advance.

[jwzg]

I'm well guys...I'm just swamped at the moment. New job, new house and that's just the beginning. I'll be keeping in touch. I have the pocketxpdf package, but I'm on a dial-up connection right now. As soon as I can get real internet, I'll do it. If someone can beat me to it though...

[jwzg]

Pocketxpdf

Initflashfiles included along with .dsm file and fonts. Used in my personal ROM.

ftp://xda:xda@ftp.xda-developers.com/Uploads/WIZARD/Kitchen_Pantry/PocketXpdf.zip

[jorge_culv]

No doubt you guys have seen the massive OEM Pack included in mattk_r's Rom Kitchen. Links to ver 3.9 are in the first post here:
http://forum.xda-developers.com/showthread.php?t=311144

I sent in some packages that may make it into ver 4.0, but also want to cross post here in case someone's looking for them. Sorry for the double post:
http://forum.xda-developers.com/showpost.php?p=1436358&postcount=133

Include in my attachment are xnView Pocket, cLaunch today plug-in, Calendar Plus today plug-in, Tascal Reg Editor, a Unit Conversion utility, and a simple countdown timer I use when grilling steaks. Cheers

[Noonski]

Maybe you can add to the first post that request and posts of paid for software isn't allowed. Or maybe i'm wrong in understanding this rule.

Also maybe a link to....... Man is the search horrib;)
http://forum.xda-developers.com/showthread.php?t=303195 (http://www.ajax.nl/web/show/id=154342)
Which explains how to make an OEM package?

You said it yourself,
Wholy Wonderbra's Batman, This Looks almost two zebra's!

I have not yet looked if there exists a Shozu package.

[mfrazzz]

Ok, to help contribute to this thread, here's a set of packages all zipped up. These are ones I used in XM6r3 so they all work and have been tested. I think a couple may already be in this thread, but you can pick an choose:

XM6r3 OEM Packages.zip (http://www.savageground.com/downloads/mfrazzz/XM6r3 OEM Packages.zip)

This consists of:
Schaps Advanced Config Tool (0.9)
PHM Alt-Tab
Arcsoft MMS 4.2.8
ClearTemp
DUN ReEnable Hack
Mortscript 4.0
OxiosMemory
PeekPocket 1.2
PocketCM 0.9
SK tsync (Time Sync)
Today Agenda 1.0 Beta
TotalCommander 2.5 Beta 3
10 Button Comm Manager from Kaiser (NOTE: This caused problems with Schaps Advance Config Tool)
Esmertec Java Manager

Enjoy!

[Noonski]

Ok, to help contribute to this thread, here's a set of packages all zipped up. These are ones I used in XM6r3 so they all work and have been tested. I think a couple may already be in this thread, but you can pick an choose:

XM6r3 OEM Packages.zip (http://www.savageground.com/downloads/mfrazzz/XM6r3%20OEM%20Packages.zip)

This consists of:
Schaps Advanced Config Tool (0.9)
PHM Alt-Tab
Arcsoft MMS 4.2.8
ClearTemp
DUN ReEnable Hack
Mortscript 4.0
OxiosMemory
PeekPocket 1.2
PocketCM 0.9
SK tsync (Time Sync)
Today Agenda 1.0 Beta
TotalCommander 2.5 Beta 3
10 Button Comm Manager from Kaiser (NOTE: This caused problems with Schaps Advance Config Tool)
Esmertec Java Manager

Enjoy!

Since i ain't got a lot of contributing to do, i thought i'd just upload your Packages to the FTP folder.
Makes me feel somewhat usefull.

And i have added the HTC_Audio_Manager.rar oeps let me rezip that then, and the reTOUCHed dailer-OEM-package.zip.
from the http://forum.xda-developers.com/showthread.php?t=311225 thread.

Also added AdobeReader.zip but i can't check at the moment if this is a correct package it came from the Core Kitchen.

[Rcas]

edited... nm :p

[famewolf]

Request for OEM packages of:

Schaps Advanced Config v1.0
PocketCM V0.12

I can provide cabs of these two if needed.

Thank you!

[famewolf]

No doubt you guys have seen the massive OEM Pack included in mattk_r's Rom Kitchen. Links to ver 3.9 are in the first post here:
http://forum.xda-developers.com/showthread.php?t=311144

I sent in some packages that may make it into ver 4.0, but also want to cross post here in case someone's looking for them. Sorry for the double post:
http://forum.xda-developers.com/showpost.php?p=1436358&postcount=133

Include in my attachment are xnView Pocket, cLaunch today plug-in, Calendar Plus today plug-in, Tascal Reg Editor, a Unit Conversion utility, and a simple countdown timer I use when grilling steaks. Cheers

Ok..I know this is gonna sound stupid...but only way to learn I suppose...I downloaded Mattk's 4.0 kitchen...how can I extract the oem packages in it and make them available for the hypercore kitchen I'm using?

Yes I'm as green as it comes when it comes to rom burning.

[Noonski]

I'm playing around trying to get my own OEM package for Dutch Touch Rom.

Does the below RGU setting look right?

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
REGEDIT4

[HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\A2 DP\Settings]
"BitPool"=dword:58
"MaxSupportedBitPool"=dword:58
"UseJointStereo"=dword:0

[HKEY_LOCAL_MACHINE\Software\OEM\MASD]
"QuickDial"="string:"
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Yes I know I should just test it but i'm not cooking, yet just helping out Junior chef and trying to understand the OEM package so i can contribute some more.
Am i right in believing that for a string value i should simply use "string"?
And also will a blank entry override it to blank if there's a value set in that particular string there?
And should i use
"QuickDial"="string:"
Or
"QuickDial"=string:
Or am i completely off, and is there an easy way to just delete a string value?

Here's the package. (http://forum.xda-developers.com/attachment.php?attachmentid=49405&d=1189021461)

And Yo Wolf doesn't the Core Kitchen actually extract the OEM's (green to)

[famewolf]

Well..I did finally manage to take two or three rom's and extract them to look at their packages...and then build a new rom with some changes I made...(updated peekpocket to 1.3, pocketcm to 0.12, schaps to 1.0, comm manager to 10 button, removed adobe reader LE and added pocketxpdf....changed the grey/green mun keyboard skin to black diamond keyboard skin) and got it to build/flash correctly. I would have thought though by now we would have seen three things:

1) A kitchen with a "pantry" built in so that you can "add" packages to a list of always available ones...these would be kept in a pantry.zip or something seperate from the oem and sys folders.

2) A tool to take a standard cab and convert it to an oem package. They both contain the exe and the registry entries..not sure what the big deal is but I may be missing something.

3) upx 3.01 was released on july 31, 2007 with a new --ultra-brute option for compression. The ability to drop in the current version for use would be useful. The ability to "recompress" a package so that it uses upx -d to decompress and then apply ultra-brute to see if we can squeeze additional space.

[Noonski]

1) A kitchen with a "pantry" built in so that you can "add" packages to a list of always available ones...these would be kept in a pantry.zip or something seperate from the oem and sys folders.

2) A tool to take a standard cab and convert it to an oem package. They both contain the exe and the registry entries..not sure what the big deal is but I may be missing something.

3) upx 3.01 was released on july 31, 2007 with a new --ultra-brute option for compression. The ability to drop in the current version for use would be useful. The ability to "recompress" a package so that it uses upx -d to decompress and then apply ultra-brute to see if we can squeeze additional space.

1. It exists.
Just look at Faria's WM6 kitchen and use the XML but then edited to other packages. (i'm downloading it now to again)

2. That would be cool. Because right now i have no problem custimizing my phone building cabs to install stuff and change registry settings. If these could be changed into OEM my life will be a lot easier.

3. I'm running a compressed Touch with 12mb pagepool and still 20 mb left on 286mhz. But it definetly runs slower than a stock rom. So i have double feeling about compression. (it does get faster once memory usage drops to 11MB left free, because everythings cached). But everything takes longer to start up.

[Noonski]

Added:
Calc v3 from artemis tested on Wizard.
BatteryStatus 1.04
And PPC Screen Capture

Is it possible to get an OEM for enable Rapi and SPCert?
Or do they have to be installed after flash?
And also Googlemaps is one i havent'seen or is this a no go as it is a java app?

BTW are these exactly the same for the ELF as for Wizrd?

[famewolf]

Added:
Calc v3 from artemis tested on Wizard.
BatteryStatus 1.04
And PPC Screen Capture

Is it possible to get an OEM for enable Rapi and SPCert?
Or do they have to be installed after flash?
And also Googlemaps is one i havent'seen or is this a no go as it is a java app?

BTW are these exactly the same for the ELF as for Wizrd?

If you can figure out how to make a java app oem package you will be popular. ;) I know I have been looking for how to add gmail and opera mini for a while now. I actually don't think it's possible because each java manager (esmertec, intent etc) is going to put the midlet somewhere different..you'd have to built the oem package for a specific java manager at a minimum.

[Noonski]

So theoreticly it could be in Ext rom?

Because the Java manager would allready be active to pick up the installation?

Or in short damn damn damn.

EDIT:

Googlemaps can now be used in Package. No registry keys needed and the .dat files can be skipped because GM creates them on first run in application data.

So no i didn't figure out how to make a Java Package, but it's still good news.

I'll make one for this thread.

Cooked And Tested.
GoogleMaps
ftp://xda:xda@ftp.xda-developers.com/Uploads/WIZARD/Kitchen_Pantry/314 GoogleMaps.zip

Also added new WLM 1.6.03 With No Sync Contacts Fix.
Tetsted on ELF but should run on Wizard to.

[joemanb]

some packages I did for my personal rom:

Mortbuttons2.41

Hbuttons

Gsfinder+ (with file dialogue changer & notepad=better than Total commander)
(edit files with notepad using SEND TO in gsfinder+)

TodayGif-003

PocketC by Orbworks with apps from OnHiatus
Pike
LaunchPad
HiPKeys
ACT
Rover

I like to set up my Hbuttons then export the registry keys to the package so they're preset before cooking. the same with mortbuttons, but you only need the .mbi files.

Enjoy.

Joe

Sorry, posted files here, can never connect with the FTP server...

[ANTC]

any one got syncrotime?

[calouro]

Does anyone have the TouchFlo that does not need a button to activate?

[theloon]

any one got syncrotime?

Had it in one of my earlier kitchens I can PM link if needed, Haven't needed it since I enabled tab in phone/settings.

[Noonski]

any one got syncrotime?

I could make one but it runs fine from Storage card.

Will get back to this.

PM me if i forget about it tomorow.

[mfrazzz]

any one got syncrotime?

I had syncrotime, but switched to tk synctime which is better IMO. go to the previous page of this thread and its in my post with a bunch of packages I put in XM6r3. BTW: Welcome back ANTC

[charly_mx]

Im looking for a working OEM package for cyberon vioce dialer. :)

Do anyone here have it??

[gullum]

Does anyone have the TouchFlo that does not need a button to activate?

simply make a rgu file with these settings and you have the top to buttom activation :)
but you need to haven the touch.dll from HTC Touch in you rom

REGEDIT4

[HKEY_LOCAL_MACHINE\Software\OEM\TFLOSettings]
"FingerPressure"=dword:2000
"2ndSample"=dword:16
"1stSample"=dword:c
"DelayDiff"=dword:28
"Boundry"=dword:0
"DownLength"=dword:200
"UpLength"=dword:AF0
"PageLow"=dword:5
"PageHigh"=dword:e
"PanType"=dword:1
"SpeedLow"=dword:5a
"SpeedHigh"=dword:69
"EnableCube"=dword:1
"EnableSound"=dword:0
"EnableScroll"=dword:1

[g0rg]

Please post in the General or Tytn forums, not in both. This subforum is for Wizards only.

[ANTC]

I had syncrotime, but switched to tk synctime which is better IMO. go to the previous page of this thread and its in my post with a bunch of packages I put in XM6r3. BTW: Welcome back ANTC

thanks Mf, ended up using the Reg hack

[ANTC]

hey guys could someone make me two packages, I lost the program to extra them properly to make my own package

[calouro]

hey guys could someone make me two packages, I lost the program to extra them properly to make my own package

If you look at post #21 Mfrazzz posted Adv Config.

[ANTC]

If you look at post #21 Mfrazzz posted Adv Config.

thanks found everything



any one have the Tzones package?

[cybersphere01]

Im looking for Call Firewall, the newest Advanced Config Tool 1.0, and battery status

[ANTC]

can someone hook me up with a Camera package. that works LOL

[Genesis3]

Ant, what's wrong with the ones out there already?

The ones in the Kitchen Sink area work - you have to resolve the conflicts (extra file copies) but it works fine - at least on my Wiz.

[Noonski]

I know that not all OEM packages that work on one device might not work on others. But would it be smarter to have one main repository on the FTP?

Looking at the amount of tests and flashes i do i wouldn't mind trying an OEM that doesn't work anyway. And since for instance a Kaiser Chef or or user won't be checking out a lot of threads for other devices. Eventhought i have both a Wizard and elf. I'm losing sight of the wizard threads let alone other devices. Plus it wil save space having only one place with repositories.

[Genesis3]

I uploaded the Advanced Config Tool 1.0 (fixed the 0.9 one with the requisite files; 0.9 has some problems with some builds); its in Advanced_Config_Tool_1.0.zip

Enjoy.

Its in the build that I have linked off my sig; verified and working.

[jwzg]

I'm looking for an Office 2007 Package that works on the .318 build and has the built in .zip file handler as well as fax view.

[jwzg]

I'm looking for an Office 2007 Package that works on the .318 build and has the built in .zip file handler as well as fax view.

I just made it myself. No worries. I'll share later.

[epimazzo]

OK guys,

These OEM packages are working fine on my latest ROM. Have fun!:)

Based ROM Kitchen: TheLoon 8.1

OEM content:

HandiTV - A great software for streaming video. It comes with a lot of prebuilt channels. Work better under Wireless connections.
HushSMS - That's a app to end SMS in a hidden way.
WIMR - Nice app that shows where are you loosing RAM.
VxUtil - A very well known app used to connectivity and networking procedures. Must have!
FoxitReader - A new PDF reader.

* there's only an issue with HandiTV that I still haven't had a clue. But it works fine anyway. When you click it to load, an error message is shown stating that a important file is missed. Just ignore it and move on!

Cheers:cool:

[Noonski]

OK guys,

These OEM packages are working fine on my latest ROM. Have fun!:)

Based ROM Kitchen: TheLoon 8.1

OEM content:

HandiTV - A great software for streaming video. It comes with a lot of prebuilt channels. Work better under Wireless connections.
HushSMS - That's a app to end SMS in a hidden way.
WIMR - Nice app that shows where are you loosing RAM.
VxUtil - A very well known app used to connectivity and networking procedures. Must have!
FoxitReader - A new PDF reader.

* there's only an issue with HandiTV that I still haven't had a clue. But it works fine anyway. When you click it to load, an error message is shown stating that a important file is missed. Just ignore it and move on!

Cheers:cool:

Thanks that WIMR will even be handy for me at the moment without cooking it.

[famewolf]

OK guys,

These OEM packages are working fine on my latest ROM. Have fun!:)

FoxitReader - A new PDF reader.


I'm interested in the new PDF reader...ummm did you forget to attach it? ;)

[commander5555]

Could anybody post a OEM pack or cab for modem link please ?

[villaboy25]

Could anybody post a OEM pack or cab for modem link please ?

Here is the link for bluetooth DUN cab
http://forum.xda-developers.com/showpost.php?p=1281607&postcount=1

[commander5555]

Here is the link for bluetooth DUN cab
http://forum.xda-developers.com/showpost.php?p=1281607&postcount=1

1.000.000 thanks for quick response pal.....

[epimazzo]

Ops....forgot that!! Sorry guys!

Thanks Famewolf for light me up!:p

Here it goes...

I'm interested in the new PDF reader...ummm did you forget to attach it? ;)

[walvekar rajesh]

is it possible to get oem pack for SPcerts? or anything that will disable windows security warning?
thanks in advance

[pppppp]

Ok, to help contribute to this thread, here's a set of packages all zipped up. These are ones I used in XM6r3 so they all work and have been tested. I think a couple may already be in this thread, but you can pick an choose:

XM6r3 OEM Packages.zip (http://www.savageground.com/downloads/mfrazzz/XM6r3 OEM Packages.zip)

This consists of:
Schaps Advanced Config Tool (0.9)
PHM Alt-Tab
Arcsoft MMS 4.2.8
ClearTemp
DUN ReEnable Hack
Mortscript 4.0
OxiosMemory
PeekPocket 1.2
PocketCM 0.9
SK tsync (Time Sync)
Today Agenda 1.0 Beta
TotalCommander 2.5 Beta 3
10 Button Comm Manager from Kaiser (NOTE: This caused problems with Schaps Advance Config Tool)
Esmertec Java Manager

Enjoy!

Can you reupload it, please? Thanks

[commander5555]

could any body post OEM pack for gsfinder please.....

[Noonski]

is it possible to get oem pack for SPcerts? or anything that will disable windows security warning?
thanks in advance

Remind me if i forget to post this.

I lost all my OEM packs and i made one for SPCerts and Rapi and stuff.
So hopefully i can find it or i have to make a new one.

[grinminded]

Request ArcSoft MMS 5.0.3.17 OEM.

thanks u.:)

[famewolf]

ANyone have the new mortplayer or the new mortscript in a package?

[famewolf]

Can you reupload it, please? Thanks

Just use the XM6r5 cooking kit instead of the old xm6r3 packages.

[S.V.I]

Request ArcSoft MMS 5.0.3.17 OEM.

thanks u.:)

Ditto:)
I need one too. I know someone around here has one somewhere in their kitchen laying around under the sink:D

[grinminded]

Ditto:)
I need one too. I know someone around here has one somewhere in their kitchen laying around under the sink:D

:D

http://rapidshare.com/files/104716504/Arcsoft_MMS_5.0.31.7.rar

[S.V.I]

Thank you for that :)

[Noonski]

I don't like how Arcsoft 5 forces me to merge SMS and MMS.

Haven't been able to separate them and what is the big difference to 4 anyway?

[S.V.I]

i dont mind the merging, i just have a problem getting it to flash.
maybe i need mms4. do you by chance have a package for that as well?

[S.V.I]

Could anyone turn this cab into an oem package?
I can't find the tools to make it my self. I loooked on the wiki and the links are so old they are dead.
I need it to fix the screen issue most of us have been having

[grinminded]

Could anyone turn this cab into an oem package?
I can't find the tools to make it my self. I loooked on the wiki and the links are so old they are dead.
I need it to fix the screen issue most of us have been having

here sir.

:)

[S.V.I]

here sir.

:)

hahahaha!

You rock!
Although I don't need it anymore on this build, I'm sure many people will need it later.

I will download and keep it safe in case someone should need it again :)

does anyone know where I can get a bigger nb0 for my rom? I ran out of room lol. having to use the 318build. I might just have to highjack the original 5.1 from tmobile. I assume it is possible. however I'm afraid it is going to show the os as the old wm5.

[xda2_haseeb]

People i have attached Nokia 5700 XpressMusic player to this see if any one of u can port it to Wizard. I like it alot. Thnx in Advance.

[bearhntr]

A great idea was brought to my attention by DaKender and rather than wait on a poll to fill in, I thought I'd just go ahead and start it.

This thread is only for the request and posting of working packages for kitchens. A great place to learn how to make packages is here.
http://forum.xda-developers.com/showthread.php?t=303195

Kitchen authors, please PM me with posts that can be moved into this thread so you can keep your kitchen threads cleaner and answer tech questions.

If you are posting a package:

1) Packages may only consist of free software or software embedded in a factory ROM.

2) Package(s) must work and have been used by the poster in cooking a ROM. Please state the kitchen you used.

3) Uploads must be named according to contents (i.e. Compressed_Office_2007_for_318_build.zip).

4) You must state the contents of the package in your post. Not every little thing but enough for a person to make an informed decision to use the package or not. Packages do not have to include an option.xml file. However, they must include an initfileflashes.dat as well as .rgu and .dsm files.

5) If your package is too big, please use the uploads/Wizard section of the FTP to post and post the link.

If you are posting a request:

1) Click on the paperclip icon on the main forum page next to this thread to see if a package you are requesting has already been posted. This is the most important rule!

2) Include requests for multiple packages in a single post. No need in cluttering the thread with multiple requests by the same person.

Please keep this thread clean. Useless or off-topic posts will be promptly deleted.

================================================== =====

:) Why could I not have found this posting 2 weeks ago while I still had a full head of hair.

MUCHO GRACIAS, TRES BIEN, or as we say in the South: WOO HOO!!

I have a suggestion for packaged ROMs, either in .ZIP or .RAR format only and that they contain a TXT file with the following info:
CREATOR
CREATION DATE
BASE ROM USED
LANGUAGE(S)
LISTING OF INCLUDED SW

This would be like the .NFO file you find in a lot of files, makes it much easier to catalog what you have.

The NEWBIE who WANTS TO LEARN!

[S.V.I]

I need some help: Ever since I installed SRSWOW. I have been having a problem with my volume not being loud enough. It used to be abnoxiously loud! and made a fantastic allarm clock. the ringers were also very loud.
The problem is that I didn't save the registry settings, because I didn't need them. also, I had to cook the SRS right into the rom to make it work.
can anyone send me the loudest registry settings for wizard ( ones that will not blow the speakers out?)??
I only need to fix the intrnal speaker volume the rest is perfect.
Thanx in advance.

[S.V.I]

Does anyone know how I can turn my OEM package to cAb? someone wants to install my commanager on their phone and is asking for a cab... so does anyone know how I can do it?

[epimazzo]

Buddy,

I normally do that through WINCE Cab Manager. I create a new CAB and add files, regs, etc..into the new pack. That's it.!:p

Does anyone know how I can turn my OEM package to cAb? someone wants to install my commanager on their phone and is asking for a cab... so does anyone know how I can do it?

[epimazzo]

Guys,

I'm sharing my whole OEM packages used on my latest custom ROMs and old ones as well. It's a bunch of packages with approximately 91Mb.:)

Hope you all like it!

Enjoy...

Have a great day!

Download Link (http://rapidshare.com/files/112268537/KhanX_Master_OEM_Packs.rar)

[cornelha]

Guys,

I'm sharing my whole OEM packages used on my latest custom ROMs and old ones as well. It's a bunch of packages with approximately 91Mb.:)

Hope you all like it!

Enjoy...

Have a great day!

Download Link (http://rapidshare.com/files/112268537/KhanX_Master_OEM_Packs.rar)

Could anyone upload this to another mirror please ? Rapidshare giving me headaches

[demo05]

Guys,

I'm sharing my whole OEM packages used on my latest custom ROMs and old ones as well. It's a bunch of packages with approximately 91Mb.:)

Hope you all like it!

Enjoy...

Have a great day!

Download Link (http://rapidshare.com/files/112268537/KhanX_Master_OEM_Packs.rar)

hi, can i cook a rom for my asus p535??

Thanks

[ANTC]

Can someone make these 2 cabs into packs?
thanks http://rapidshare.com/files/95732296/GPSGate.rar

maybe theres a package flooting around somewhere i haven't found it

[ANTC]

bump no one has a sec to make these for me? lol I wish i could I dont have the software though.

[S.V.I]

there is a package creator made by ervius. it works quite well. look for it on google/ or this forum.
unfortunately, 8 only use opera mini to surf the web and forums, otherwize I would post the folder with all the stuff you need to make your own.
sorry dude, no time. the cafe is closed for the night :(

[veda_sticks]

Has the kitchen rom file been moved from the ftp server? theres no such directory in the wizard rom folder in the ftp server.

[Ray_jai]

Same here, the FTP won't work.
can someone fix the links?

thank you.

[Noonski]

Same here, the FTP won't work.
can someone fix the links?

thank you.

FTP has undergone some massive reconstruction as it was being used to post warez. So now Uploads are being checked before being put to the right directory. So some folders have not been updated yet or updated correctly.


jwzg has been busy unfortunatly.

[Ray_jai]

thank you.

Does anyone have t he OEM for PIE 6.1?

Thanks.

[sino8r]

thank you.

Does anyone have t he OEM for PIE 6.1?

Thanks.
Any WM6.1 Kitchen should have them in it. There is an other way...
Have you tried the PIE WM6.1 .cab file in this thread?
http://forum.xda-developers.com/showthread.php?t=365743

One way to get them, install the .cab and copy the files it installs and then copy them to your PC via activesync or SD card and whatever OEM kitchen you wanna cook.
Oh yeah, make sure you take out the older PIE files first! Or copy over them...

[gxg]

Had it in one of my earlier kitchens I can PM link if needed, Haven't needed it since I enabled tab in phone/settings.


can you post a link please?!