Charmer no signal :( any info or help

[svetli]

Hi to all in this forum.

I have one T-Mobile MDA Compact II PM200. In this forum i hound that his name is Charmer. I try to unlock it with Lokiwiz03a. Program give me a code but device says that code is wrong. I try with other software to unlock it and after that mobile work with SIM card but no signal :(

I reflash mobiele with WM6 founded her in the forum, not it have English (before have German) but again no signal. I try now to unlock it with Lokiwiz02a and choose CID unlock. Again no signal.

When device in Automatic search mode no found network. If in Manual mode found but unable to register in network. When i put mobile to my computer speakers no outgoing signal from mobile :( that's not normal.

What is the problem ?
Can onyone help me with information ot needed software ?

In moment mobile information is:
ROM version: 10.2.0.8 WWE
ROM date: 2/03/07
Radio version: 01.12.20
Protocol version: 4.0.13.23

Identity:
Model No.: WIZA200
Platform: PocketPC
IMEI: 35703700051525500

Hardware:
CPU: OMAP850
Speed: 195 MHz
...


I try to found information about this problem here in forum but w/o result.


10x in advance

[vlodeck]

Did you try to flash a new radio? 2.69 or 2.19?

[svetli]

No.

I found this files:
BREEIMG.zip
breeze.zip

inside breeze.zip are:
SSPL.exe
spl
breezessplv1.nb

inside BREEIMG.zip is:
BREEIMG.nbh

is this needed files for radio flashing ?

if not then what files I need to try with other radio version ?

[svetli]

I download Radio from ftp on this form for Prophet. And try with Prophet_G4_RadioRom_v2.47.11 but now mobile not start. Go to splash screen and after few seconds restart.
I try to put it in bootloader mode but ActiveSync can't make connection and for that flash software can't wreit new radio or flash into mobile.

I ry with:
1. dowenload this t-mobile official rom (http://www.tm-phonedownloads.com/files/RUU_Compact%20ll_2060227_20602110_021921_T-MobileUK_Ship.exe)
2. enter your Charmer into bootloader mode by pressing power + camera + reset, let go of the reset, but keep holding power + camera until the three colur screen will show up (that is bootloader mode).
3. connect the Charmer to your pc (make sure your battery is fully charged)
4. run the t-mobile rom.
5. good luck!

but ActiveSync can't make conection.

?

[vlodeck]

If you are in bootloader Active Sync wont make a connection. Just plug in the usb cable into your phone while in bootloader and run RUU.

Cheers,
vlodeck.

[svetli]

:(
I try with this 2:
1. T-Mobile official rom RUU_Compact ll_2060227_20602110_021921_T-MobileUK_Ship
2. Prophet_G4_RadioRom_v2.69.21


T-Mobile official rom RUU_Compact ll_2060227_20602110_021921_T-MobileUK_Ship
===================================
inside are this files:
EnterBootloader.exe
nk.nbf
README.doc
ROMUpdateUtility.exe
RUUGetInfo.exe
RUUResource.dll

Prophet_G4_RadioRom_v2.69.21
========================
inside are this files:
EnterBootLoader.exe
nk.nbf
ROMUpdateUtility_G4.exe
RUUGetInfo.exe
RUUResource.dll

phone not start normaly. just start and after 5sec restart. i put it in Bootloader mode (press Camera, Power_buton and Reset. then release Reset and after few sec. mobile goto in Bootloader mode). when conect USB cable ActiveSync not find mobile and this file not make upadte/conection: ROMUpdateUtility.exe and ROMUpdateUtility_G4.exe
if I try to start RUUGetInfo.exe windows says that this is not valid Win32 application.

then what RUU to start ?
how to flash other Radio into this mobile or to reflash it again to be alive ?

[svetli]

anyone will help me for my problem ?

in moment when i start my pocetpc it displays:
IPL 1.12
SPL 1.12.0000

OS 10.2.0.8


the row GSM .... missing.
in moment i can't make connection with ActiveSync. then how to flash again mobile ?

now i try to flash it with RUU:
http://www.tm-phonedownloads.com/download_manager_mda_com2.html
http://www.t-mobile.de/downloads/?redirect=http://www.t-mobile.de/downloads/t-mobile/ruu_compactii_aku3.3_38222_382117_026921_tmo_de_ge r_ship.zip

but it gives a error :(

[svetli]

i try with this:
http://www.my-audio.net/xda/Universal/Shipped_Complete_Updates/Universal_Upgrade_v1.30.68_radio_1.09.0.zip

but when software start flashing says that this Utility is not for my device and to find right :(


?????

[vlodeck]

I'm guessing that this universal radio upgrade is for universal :)

Download this:
http://www.mobione.pl/pliki/ruu_252_eng.zip

Extract it, copy the .nbf of the rom you want to upgrade your device with to the extracted RUU folder. Once copied - run RUU.


P.S. The problem with your device is that you have upgraded wm6 on 1.xx bootloader. Thats why the system doesnt start. If the method I described above doesnt work. Post me.

Cheers,
vlodeck.

[mikecarlone]

now i can bootloader mode,
i did it but got this error while i upgrade my rom to newest rom 3.3...

i got this "invalid command 326": please check your NBF data, this NBF data cannot be used for your PDA Phone.

[svetli]

hi again to all

after long time i try to play agian with this brick-PM200 that haven't signal.

last time (before more 2 years) i write ROM and after that PM200 not start, only in Bootloader mode (3 color lines).

today i revive it when flash this:
HTC_charmer_upgradeut_noid.rar
(
EnterBootloader.exe
nk.nbf
ROMUpdateUtility.exe
RUUGetInfo.exe
RUUResource.dll
)

PM200 start, in begin fave full signal. after 30-40 seconds signal gone (but not test in/out call). i try to restart mobile, try hardreset, try manual search on operator - all no result.

on start i put near radio but power amplifier not work. i think that this is harware problem.
but not 100% sure.

is possible this problem to be from wrong radio settings ?


i try to write different radios for Prophet but every time get message "Invalid tool" and radio flashers stop.
i try with universal radio thata Vlodeck says but again this message.

what to do ?


before two days i repair one HTC Touch Elf100 and read that can sniff USB comunication to check Vendor ID and other ID.
but in my PM200 this not work. on Elf100 work easy like is writed here in forum.
when start wyty (or what's name is) make connections with mobile but after write:
ruurun 0

says that need password. if try with password for Elf100 not accept it.
what is the password for Charmer (PM200) ?
or if there is other way to get Vendor ID and other ID how ?

[ChrBeck]

I can help you maybe. You need to downgrade to Aku 2.2 using the original utulity. Then the Radio will be downgraded too. But nobody knows the exact way on how to do that. (Maybe Vlodeck knows that?) I'll try to get it this week and tell you then.

As for the password try CHARMER. I have never been able to test it with MTTY cause I don't get in the right mode but I think the olny possibility is CHARMER. Just try it with whatever tool you want.

Hope that was helpfull

[svetli]

10x for answer.
next day will test password and post result.

how to downgread to aku2.2 ?

if you find solution please post it.

[svetli]

today i try but w/o success:

Cmd>password charmer

Cmd>ruurun 0

Cmd>getdevinfo
Invalid command : getdevinfo
For a help screen, use command ? or h

Cmd>



i try and with passwrod CHARMER. result is same.
what are commands for MTTY that supported Charmer ?

[ChrBeck]

OK you have the same problem I have. You have Cmd> in the window. To get the comands and the password working you need USB> instead of Cmd>. That is the same problem I have and I don't know how to fix it.

[svetli]

in moment i use MTTY 1.42
before 3-4 days i repayr one HTC Touch Elf100. and this MTTY work find. no problem that write CMD not USB.
terminal show CMD> i write commands and mobile answer w/o problem.
but in my Charmer not answer.

possible reason is access password. but not sure.

[ChrBeck]

There are simple comands. And for them you don't need SuperCID. I tried them and they haven't worked too. So I think there is something else with it. Maybe the Bootloader locks all comands and you need a password for that too. But I don't know about that.

[svetli]

@ChrBeck
you try to make SuperCID SD card to have full access to mobile. and after that to try flash it with RUU ?

next morning will try this.


p.s. now find this:
http://www.tm-phonedownloads.com/
http://t-mobile.iris-global.com

[ChrBeck]

Well, we can't SuperCID and Security unlock a Charmer with a bootloader over 1.x at the moment. This is surely impossible. That won't work using a SD Card too. So I think you will not have any luck.