test gps chipset functionality

[mikron15]

Hi there,
Is there a way i can test if the gps chipset on my new p3300 is working properly?. I installed Iguidance but it will never get a fix although it does auto detect the gps port . I ran quickgps over wifi and despite downloading the latest fixes, Iguidance fails to get a fix

I am looking for any freeware appz which can just tap into the gps receiver and start spitting some data so i can be assured its not the gps module but Iguidance. Something like a gps viewer which displays the # of sats, lat n longitudes etc.

I appreciate any help I can get as I have only 2 more days before i can get this device exchanged.

Thanks in advance!~

btw, I am running Wm6 using B&b3.7 rom

[aje_fr]

Search on google for visualgpsce.
Bye

[mikealder]

Grab a copy of the TT GPS Driver 2,06 from here http://www.pocketgpsworld.com/modules.php?name=Downloads&d_op=viewdownload&cid=13 install that as it is an application in its own right.
Fire up the application on the Artemis and select the GPS tab in the application Use the following Settings:
Top drop down box "NMEA 0183v2 9600"
Second drop box "COM4"
Make sure the two sliders in the middle of the screen are to the right, then check the grey/ blue box top left, return to the "Status" tab and take the unit outside, you should see some activity and get a position fix after a couple of mins - Mike

[mikron15]

Thank you guys so much..
After running the app, i got 12 sats in view and 7 fix. So w00t, the gps chip is working.

Now to figure out whats wrong with iguidance

Thanks again...

[mikealder]

Not too sure about that app as I have not tried it (yet) - does the GPS hardware actually start when you fire up the application - if you can configure it to use COM4, Baud 9600 do so and try it again. The indication the GPS has fired up is down to the LEDs on the device, once started it will flash orange to signify its in use. If this doesn't happen you might need to look into using Fransons GPS Gate to present a virtual GPS port to the application - Mike

[mikron15]

Well, I do see the orange light blinking when Iguidance is running but still sees no sat's.
I even upgraded to V3.01 and same issue. Also tried Franson gate app and no luck.
I could try tomtom since that appz does see the sats and gets a fix ( tried it using a free US map) but i am having trouble loading the N.A+canada map since i don't have the cab file for it just the extracted map files which Tomtom HOME will refuse to load unless its a cab file i believe

Off to google to hunt on instructions on how to make cab files...

[evaluator]

last time i checked iguidance v3 wasn't compatible with the artemis.

[mikron15]

Oh ic. I did come across a couple of posts reflecting the same .
Oh well..I loved the map loader feature of Iguidance. Sad to see its gone in the upcoming V4.
Anyways I got tomtom running.. i was suppose to have the maps in the root folder of the memory card not in a sub-folder ! :o