Who wants the ATT WM6 rom?!??!

[mikeypom]

Does anyone know which is the registry key that will change the phone band settings. I have changed the following, but it not updating the selection offered under phone settings band selection.

HKEY_LOCAL_MACHINE\SOFTWARE\OEM\PhoneSetting\BandT ype]

Any help would be greatly appreciated.

[bnycastro]

Does anyone know which is the registry key that will change the phone band settings. I have changed the following, but it not updating the selection offered under phone settings band selection.

HKEY_LOCAL_MACHINE\SOFTWARE\OEM\PhoneSetting\BandT ype]

Any help would be greatly appreciated.Why not change the bands in Phone Settings?

Menu > Preferences > Phone Settings... > Services [tab] > Band Selection

[mikeypom]

I actually want to change the bands which are offered under that tab. I want to put in GSM(900+1800)+UMTS(850) which isn't a choice.

[bnycastro]

I actually want to change the bands which are offered under that tab. I want to put in GSM(900+1800)+UMTS(850) which isn't a choice.hmm i see what you want to do is much more complicated than what i understood from your post. maybe someone more knowledgeable can chime in :rolleyes:

[jho51e]

What am I doing wrong?

I have an exmpty 2GB miniSD card..
Only has a folder called WMDRM and the CHEEIMG.nbh file
Pressed the PTT button and the reset button while plugged into a power supply.
It only restarts and then that's it...

Have I missed a step? Please help!

Should I move the CHEEIMG.nbh file in the WMDRM folder? or leave it in the root folder?

[bnycastro]

What am I doing wrong?

I have an exmpty 2GB miniSD card..
Only has a folder called WMDRM and the CHEEIMG.nbh file
Pressed the PTT button and the reset button while plugged into a power supply.
It only restarts and then that's it...

Have I missed a step? Please help!

Should I move the CHEEIMG.nbh file in the WMDRM folder? or leave it in the root folder?
reformat your miniSD in FAT32 there shouldn't be anything in it except CHEEIMG.nbh good luck

[oo3]

What am I doing wrong?

I have an exmpty 2GB miniSD card..
Only has a folder called WMDRM and the CHEEIMG.nbh file
Pressed the PTT button and the reset button while plugged into a power supply.
It only restarts and then that's it...

Have I missed a step? Please help!

Should I move the CHEEIMG.nbh file in the WMDRM folder? or leave it in the root folder?

you don't need it in the folder. just copy it to your minisd card then try again.

[jho51e]

reformat your miniSD in FAT32 there shouldn't be anything in it except CHEEIMG.nbh good luck

I am so sorry for a dumb question, how do I do that? I am assuming I cant do it while the card is in the phone? It will need to be connected to a card reader for me to do this?

[amberzombie]

I am so sorry for a dumb question, how do I do that? I am assuming I cant do it while the card is in the phone? It will need to be connected to a card reader for me to do this?


mate you'll need to take out the card, insert it into your computer/laptop and format the card to FAT32 first. after that copy and paste the rom file onto it, insert it back into your Treo then follow the instructions.

worked fine for me after reformatting

[amberzombie]

hey i haven't been able to get a definite answer on this... does the ATT WM6 rom come with Windows Live Messenger built-in? if it doesn't where can i download it without having to pay for activation?

[summiter]

hey i haven't been able to get a definite answer on this... does the ATT WM6 rom come with Windows Live Messenger built-in? if it doesn't where can i download it without having to pay for activation?

Built-in. It's essentially invisible until you add a Hotmail mail account. I've found it to be mildly unstable.

[Phssthpok]

I've upgraded the phone and it is great. I've seen two problems. When checking Hotmail, I can't get the mail application to download any mail that's not within the Inbox. So all my failed mail never comes down. In instant messaging, I can login, but none of my contacts are there, so I obviously can't login. All this worked fine before the upgrade. Any ideas?

[vladimir2989]

i cudent find Windows Live mesenger but after geting rid of ExternalROM it appeard as Defult like in the normal WM6

i would personaly recomend to get rid of ExtROM and have Clean PALM TREO 750 without any ATT junk

[cyberazi]

the file is gone.. can anyone pls msn me at kairozi77@hotmail.com i need the rom

[vladimir2989]

ATT WM6 ROM
http://cid-2b9d3ea20dfbf5a9.skydrive.live.com/browse.aspx/XDA%20stuff%20xda-developers.com/ (http://cid-2b9d3ea20dfbf5a9.skydrive.live.com/browse.aspx/XDA%20stuff%20xda-developers.com/)

it in RAR archive 5 parts !

[James Mark]

I had tried the rom on my cingular 750. I got totally confused. Everything works well but I just found i could not receive any call upon my update to wm6. Anyone call me could hear nothing but the busy tone and my mobile doesnt have any ring or notification, just a normal today standby screen on it. Other functions, such as GPRS, MMS, PUSHMAIL AND INCOMING CALLS, are all work perfectly. Is there anyone can help me.

[SecureGSM]

Please visit this link to download the Treo™ Recovery tool. NOTE: The page which the link refers to also contains the Treo 750v Updater 1.16 for Vodafone Customers. You SHOULD NOT use the Treo 750v Updater 1.16 for Vodafone Customers as this will downgrade your operating system to Windows Mobile 5.

http://www.palm.com/nz/support/downloads/treo/750vupdate_recovery.html

The Treo™ Recovery Tool will change the version of the GSM Radio firmware.


I had tried the rom on my cingular 750. I got totally confused. Everything works well but I just found i could not receive any call upon my update to wm6. Anyone call me could hear nothing but the busy tone and my mobile doesnt have any ring or notification, just a normal today standby screen on it. Other functions, such as GPRS, MMS, PUSHMAIL AND INCOMING CALLS, are all work perfectly. Is there anyone can help me.

[Phil750]

@Asukal: Arigatou gozaimasu [I hope that's correct] anyway big XIE XIE and THANK YOU!!! Here's what I did.
Ran 1_CHEE_MountExtROM.CAB
Soft Reset x1
Ran 2_Chee_Extrom_rename.cab
Soft Reset x1
Used Resco Explorer to Delete the Files inside ExtendedROM\Partition
Soft Reset x1
Checked ExtendedROM\Partition [files were gone]
Hard Reset x1
Got a Vanilla Treo :) = 0 AT&T Stuff! and got more Storage space too! 57.32Mb free after HR.
--
Off to install my apps and play :) Again thanks Asukal you da man!

Excellent! Thanks so much!

Is there any need to reapply the Extend Rom hack?

[tennapop]

Thank you for the WM6!!! This is INCREDIBLE!!!! It's GREAT to be able to "test" this before the official release for us on the corporate end! Can't wait to show this to some people in the office!

[edrego]

For those still needing the WM6 ROM, I just created a torrent for the rom.
The name is as follows:

"Treo750-WM6-ATT-ROM"

Tracker I posted it to:

http://www.useekfile.com

Go to this site, do a search on treo750 and you will find the torrent.

Hope this helps.

[manfly9884]

Hi guys, thanks for helping get this Rom to a vanilla state.
Since I am still on ATT network are there any registry hacks that I should do in order to run this Rom and still use it for mms and internet?

Thanks in advance.

[edrego]

I also uploaded the torrent to www.mininova.org. Do a search on "Treo750" and you will see it.

[bnycastro]

Hi guys, thanks for helping get this Rom to a vanilla state.
Since I am still on ATT network are there any registry hacks that I should do in order to run this Rom and still use it for mms and internet?

Thanks in advance.After making it VANILLA my settings were still auto detected. :)

[bnycastro]

Excellent! Thanks so much!

Is there any need to reapply the Extend Rom hack?thank Asukal he made the tools :) if you want to see the ExtROM again I guess you can re-apply it. Haven't tried it myself though.

[projekt1]

tried to install......
i press the ptt button + the reset on the side...

CHEEIMG.nbh -

SPLASH -
BOOTLOADER -
GSM-
Micro -
EXTROM-
OS-
comes up. then prompts to press power button to start update image so i press it and it seems likes its going to start but then just fades away sadly...... like me know:( ....
:confused:
i have formated the sd card, i do have a 82.3 mb file, nothing but that file is in the sd card, i did a hard reset before, i have power.... im cluelesss
please help i have been here more than 2 hrs reading EVERY single post and there isnt one that someone says it fades away as you press the power buttom when it prompts you to.....
pm's and emails are more than aprreciated. im no pro at these things but having been reading so much i thought i was ready to make this leap and i fell into what sees like a bottomless .... haha sorry for all the depression
but thnx for any help in advance. dont mind going bak to wm5 if i cant get wm6.

750.ATT.
(im brcked now.... wont soft or hard reset.... sssoooo sad....)

[projekt1]

had it conected all night but still nothing but black screen...

[vladimir2989]

try agin

take miniSD and reformat it to FAT32 Agein (Using PC)

copy CHEEIMG.nbh file and try agein !

[4u21da]

Please help!!! I am trying to find a full version of the ROM. All of the links that I find have a file that is only 50-60,000 KBs. From what I have been reading, the full version should be 80-83,000 KBs. Please help!!!!:eek:

[vladimir2989]

http://cid-2b9d3ea20dfbf5a9.skydrive.live.com/browse.aspx/XDA%20stuff%20xda-developers.com/ (http://cid-2b9d3ea20dfbf5a9.skydrive.live.com/browse.aspx/XDA%20stuff%20xda-developers.com/)


There 5 RAR archive parts Use WinRAR to open and extract file

[tmknight]

thank Asukal he made the tools :) if you want to see the ExtROM again I guess you can re-apply it. Haven't tried it myself though.

I use the ExtRom to install all the applications I had previously installed on my SD. You now have an additional 8mb of memory onthe device so why not use it to get the best performance from your apps? Overall device performance still much snappier than with whatever ATT stuff was being installed from there (I deleted everything that was in there). No issues with auto-config of phone network settings. Everything working as expected.

For folks still having trouble installing the ROM, please search for my earlier posts for info on how to format SD to fat32.

Again for folks still having problems installing the ROM, remember when reading threads in forums that the info has most likely already been provided in previous posts, don't be afraid to use the search feature. It's proper etiquette as well.

Cheers

T

[PDADoc]

The ROM update installed fine for me, but what I'm having trouble with are two things:

One, I applied the two .cab files to see and supposedly edit the extended ROM, and it shows up as a separate drive in the explorer tree with Resco Explorer, but any changes I make to it (i.e., deleting the partition folder there) don't seem to stick. After a soft reset the folder comes right back. I've tried everything, including using Total Commander, but I can't delete anything out of the folder.

Two, seeing as I can't delete anything out of it, I want to at least restore it to its hidden state, though I'd much prefer to be able to edit it and delete the AT&T stuff inside.

Can anyone help me on this? I've been searching and searching but I can't find anything that can help me through this problem.

Any help is much appreciated.

[vladimir2989]

1) instal WM6
2)Hard Reset
3) instal the first CAB
4)Soft Reset
5)install Second CAB
6)Soft Reset
7)Delete all file from Ext_Rom Partition
8)Soft reste
9)Check if files are Deleted
10) HARD RESET

[PDADoc]

That did the trick! Thanks so much for your help! :)

My only guess is that something that I had installed was preventing the tools from working properly. Now I've gotten rid of all that AT&T crap and have the extra space, and my GPRS settings were automatically customized for me.

It'll be a royal pain, but I don't want to take the chance of restoring a backup I made so I'm off to reinstall everything from scratch; going to be a looong night! :D

[frozenwaffles]

this trick is stella! yay for vanilla WM6 treo 750!
mmmm vanilla.....

[tmknight]

Folks really must try the Australian ROM, very snappy and installs rather clean by default. I still mounted the EXTrom and deleted contents to gain extra app space. Only a few hours old, but so far so good. Go to forum root and look for the thread about it to get more info. Need to be quick as ATT is watching and the links to rom are being deleted very quickly.

T

[PDADoc]

Got it all installed, everything's working, got more storage space, and I'm happy!

Still can't get hidelogo.cab to work, but I can live with it.

[pjodm]

I do not seem to find thr Australian ROM link in the forum. Can you help:)

[LaughinBro]

1) instal WM6
2)Hard Reset
3) instal the first CAB
4)Soft Reset
5)install Second CAB
6)Soft Reset
7)Delete all file from Ext_Rom Partition
8)Soft reste
9)Check if files are Deleted
10) HARD RESET

after i install wm6 and do a hard reset, it doesn't install any CAB files. please help. i'm a n00b.

[vladimir2989]

whot u mean it doesn't install any CAB files ?

copy them in to the storage card and duble tap them to open on the device

[tmknight]

I do not seem to find thr Australian ROM link in the forum. Can you help:)

Not to be cryptic, but you have to do some of the work people:
Click here to see what you're looking for (http://forum.xda-developers.com/forumdisplay.php?f=322)

[LaughinBro]

whot u mean it doesn't install any CAB files ?

copy them in to the storage card and duble tap them to open on the device

doh i'm an idiot. i figured it out. :D

[dbarber@dedicatedmicros.c]

I have downloaded the file cheeimg.nbh. The file does not install. Does anyone have a link where the WM6 Rom upgrade can be downloaded from. I am an AT&T customer in the US.

[steve1215]

One more post for the "so far so good" file. Following the instructions posted here I just upgraded my unlockeded UK Voda 750 to WM6 without a hitch. Where's that somke coming from? ;-)

For anyone needing to format their SD card FAT32 (an apparent requirement before attempting upgrade) Tucows has a free-to-try program called Flash Format (http://www.tucows.com/preview/164064) which worked a treat.

Good luck all.

Steve

[dbarber@dedicatedmicros.c]

Thanks for the post, but I already have the memory card formatted to fat32. I loaded the file and tapped it 2 times, it gives an error message. Maybe I have missed something, but I have tried the steps given in this post and it did not work. Thanks for what ever details you can provide.

[ALF@be]

Thanks for the post, but I already have the memory card formatted to fat32. I loaded the file and tapped it 2 times, it gives an error message. Maybe I have missed something, but I have tried the steps given in this post and it did not work. Thanks for what ever details you can provide.

Read carefully the first post in this tread at page 1.
The upgrade process is well explain and no need to tapped it (It will hurt you...:p ).

[nre999]

This was a painless flawless upgrade that makes my Treo 750 feel like I hoped it would when I got it last winter. It is almost as if Palm had WM6 in mind when they designed it. This ROM plus the audio patch and those nagging little annoyances from WM5 are gone (weird sound issues, alarms going off days after they were supposed to).

The best part - the cheap generic Patriot 2GB MiniSD card I got now is recognized even when the phone goes to sleep. No more having to put it in and out when I want to use it.

THAT alone is worth the price of admission!

[Treo750Junkie]

I am a Realtor and I use my Treo 750 with WM5 to run GA Supra Ekey software. Does anyone know if this software will work after the WM6 update?

[JLS2007]

Someone is selling the WM6 rom for AT&T Palm Treo 750 on eBay. It appears from the listing to be version CE OS 5.2.1437 Build 17944.0.3.1. They say it has just been released. Could this be the official WM6 release for the Treo 750.

[rhe59]

Hi
Can you tell me where to get this rom?

Thank You

[bill_2]

Hi
I installed the wm6 and I want to install again the windows mobile 5 that I can?

[dbarber@dedicatedmicros.c]

I was able to upgrade successfully. I am now looking for JAVA by Esmertec for WM6. I have the purchased version for WM5, but it will not load in WM6. Does anyone know where to turn?

[tmknight]

I was able to upgrade successfully. I am now looking for JAVA by Esmertec for WM6. I have the purchased version for WM5, but it will not load in WM6. Does anyone know where to turn?

Don't have much use for java at this time, but what about Risidoro's Intent Midlet Manager (http://forum.xda-developers.com/showthread.php?t=286604)?

[Gonemental]

G'day,

I'm a newby to all this. I was reading your thread and I was wondering if you could direct me to some mirror for the ATT palm 750 WM6 rom? I'm comfortable flashing these devices I just can't seem to find the correct rom. Please help??:eek: :eek: :eek: :eek:

[vladimir2989]

ATT WM6 ROM
http://cid-2b9d3ea20dfbf5a9.skydrive.live.com/browse.aspx/XDA%20stuff%20xda-developers.com/ (http://cid-2b9d3ea20dfbf5a9.skydrive.live.com/browse.aspx/XDA%20stuff%20xda-developers.com/)

it in RAR archive 5 parts U need to DOWNLOAD ALL of them and open with WINRAR

[dubcat]

I have a vodafone treo 750. I upgraded to the AT&T leaked image. Now, the offical WM6 for vodafone treo 750 is released. Is there any way I can use that to upgrade my leaked AT&T wm6 to the offical vodafone wm6?

[ALF@be]

I have a vodafone treo 750. I upgraded to the AT&T leaked image. Now, the offical WM6 for vodafone treo 750 is released. Is there any way I can use that to upgrade my leaked AT&T wm6 to the offical vodafone wm6?

You do the same upgrade way as you did with the leaked rom.

[dubcat]

how do i do that? The download is a zip file which just unpacks to a single application file. There is no nbh file etc :(

[dubcat]

ok i found the answer - the exe can be opened in winrar. Confusingly its the large CHEEIMG_FW.nbh file that you need... you must rename it to CHEEIMG.nbh.

[dubcat]

You do the same upgrade way as you did with the leaked rom.

thanks - im up and running now :)

[randymac88]

Hello! Successfully installed the upgrade, but for some reason active sync won't let me sync my contacts file with the new ROM. Anyone know why? This is actually my second install of the ROM (hoping to get a newer version with a different file...no luck), and I WAS able to sync on the first one. Help?

[bnycastro]

Hello! Successfully installed the upgrade, but for some reason active sync won't let me sync my contacts file with the new ROM. Anyone know why? This is actually my second install of the ROM (hoping to get a newer version with a different file...no luck), and I WAS able to sync on the first one. Help?what rom are you using?
AT&T Leaked
Vodafone Official
question did you restore a backup after the update? or it didn't want to sync just after your update?

[trublu01]

However; I first setup hotmail, then exchange. The contacts that synced are the hotmail ones. How can I change this to show the Exchange one's. All options (contacts, mail, etc) are checked. How do I not sync my hotmail contacts? Also my exchange inbox only downloads 2 out of 7 messages, as well as the folders I have created, it just downloads a few of the messages.


****Ahh, it actually merged them.

[unkabuzz]

On my old IPaq 3955 PDA running Windows CE 3.0.----- I could just push one button (like the PTT on treo 750) and hold it while I record my voice. The recording is going into the "notes" folder but it's activating the record button at the same time. It would do this even if the unit was off. I found this to be very handy while driving for recording ideas or reminders or getting that phone number from an advertisement on your local radio station. On my Treo 750 (WM5), I tried to re-assigned the button, however the button only gets me to the "notes" program, I still have to select the record and stop buttons with the stylus.
OK, so my question is this; Is this function already available on the new WM6 ROM, or is it something one of you "experts" could create??? (I am definately not qualified).
Sorry for the long winded post and thanks to everybody for all the great info on this forum.

[kortez]

On my old IPaq 3955 PDA running Windows CE 3.0.----- I could just push one button (like the PTT on treo 750) and hold it while I record my voice. The recording is going into the "notes" folder but it's activating the record button at the same time. It would do this even if the unit was off. I found this to be very handy while driving for recording ideas or reminders or getting that phone number from an advertisement on your local radio station. On my Treo 750 (WM5), I tried to re-assigned the button, however the button only gets me to the "notes" program, I still have to select the record and stop buttons with the stylus.
OK, so my question is this; Is this function already available on the new WM6 ROM, or is it something one of you "experts" could create??? (I am definately not qualified).
Sorry for the long winded post and thanks to everybody for all the great info on this forum.
Try one of those programs on http://www.vitotechnology.com/ or search on handango.com, etc.

[avf925]

No question - I am very new at the PDA rom flash process. I followed the instructions to install this ROM, but when I hold the PTT and press the PIN reset, it goes to the "4" solid color bars, but says "Serial" across the bottom of the display, and just sits there.

I've repeated it several times, with the same result. What am I missing here? Thanks for the help.

[miloszz]

Do you have fat32 formatted card with CHEEIMG.nbh there?

[jho51e]

Had that too and I realised I didn't save the file on the root folder of the card. Make sure it is not in any folder then it should work.

[avf925]

Do you have fat32 formatted card with CHEEIMG.nbh there?

It's a new 2 Gig card, and the only file on it is CHEEIMG.nbh. No folders, just the file. is there a tool I need to use to format it FAT32?

[bonovox]

It's a new 2 Gig card, and the only file on it is CHEEIMG.nbh. No folders, just the file. is there a tool I need to use to format it FAT32?


use card reader with pc then right click on mini sd drive click format

[unkabuzz]

Kortez, thanks a lot for the link. I went with "Vito AudioNotes". The Treo 750 needs to be "on" first, but other than that it seems to function pretty well. I recorded myself playing the Mandolin and I now use that as my ringtone. You could literally use any sound as a ringtone. Thought about using my girlfriends voice in the middle of passionate lovemaking, but my wife might get a little pissed off............

[avf925]

Formatting the card to FAT 32 did the trick, thank you very much for the education !:)

[jrmccracken]

I have been using it for over 3 weeks now and am in heaven, for it to be a mere upgrade over WM5 it functions way more stable. I am using it with a 4gig card and personally it is more powerful than the 8000.00 laptop I bought in 1999, It is amazing how many areas already have HSPDA enabled.

[madgalaxy]

Does anyone know where I can get the original ATT/Cingular WM5 ROM?

Thanks!

[PuPpYpWr]

can't wait for the official one tried voda, ausie not liking it oh well guess i'm going back to wm5

[mhogg]

Can anyone advise as to why when attempting to perform the WM6 Upgrade I get a Red, Green, Blue and White Screen that displays:

Palm Tr
IPL-0.20

Palm TR
SPL-0.21.0000

Serial

The screen appears to sit there until I perform a soft reset or pull the battery.

thanks

[medenblik]

Can anyone advise as to why when attempting to perform the WM6 Upgrade I get a Red, Green, Blue and White Screen that displays:

Palm Tr
IPL-0.20

Palm TR
SPL-0.21.0000

Serial

The screen appears to sit there until I perform a soft reset or pull the battery.

thanks


You need to format your MINI-SD card as FAT32 and then install the file onto the card and then do the upgrade.

[mhogg]

That solved the issue and all is well. Up and runnign on WM6 on a Cingular/ATT Treo 750.

thanks

[yud]

@Asukal: Arigatou gozaimasu [I hope that's correct] anyway big XIE XIE and THANK YOU!!! Here's what I did.
Ran 1_CHEE_MountExtROM.CAB
Soft Reset x1
Ran 2_Chee_Extrom_rename.cab
Soft Reset x1
Used Resco Explorer to Delete the Files inside ExtendedROM\Partition
Soft Reset x1
Checked ExtendedROM\Partition [files were gone]
Hard Reset x1
Got a Vanilla Treo :) = 0 AT&T Stuff! and got more Storage space too! 57.32Mb free after HR.
--
Off to install my apps and play :) Again thanks Asukal you da man!

Is there a way to restore from Sprite Backup after the hard reset in the above procedure, in order to avoid re-install and re-configure again?
After upgrading to WM6 I spent over 4 hours re-installing and re-configuring/customizing all my apps, and I really want to avoid doing it all again...

thanks...

[romannyc]

I just upgraded my Treo 750 (Cingular Branded / Unlocked / Using the old AT&T Blue sim / Old Charter Unlimited Minute Plan) ..

Everything works perfectly EXCEPT all incoming calls are using the roaming ringtone and when I send and receiving email I get a warning message telling me that I am roaming.

It appears that my phone thinks it is roaming when it is not.

I've read posts about others having similar problems, but with no solution.

I've gone through all the posts, then the registry and could not find a solution on how to fix this problem. I need to somehow tell the phone that it is not roaming or turn off/remove the roaming options all together.

This was not an issue with WM5 at all.



Other than that, I love wm6, but this is a huge issue that is causing great headaches!

Please help find a solution!

-
Roman

[BRad Barnett]

I just upgraded my Treo 750 (Cingular Branded / Unlocked / Using the old AT&T Blue sim / Old Charter Unlimited Minute Plan) ..

Everything works perfectly EXCEPT all incoming calls are using the roaming ringtone and when I send and receiving email I get a warning message telling me that I am roaming.

It appears that my phone thinks it is roaming when it is not.

I've read posts about others having similar problems, but with no solution.

I've gone through all the posts, then the registry and could not find a solution on how to fix this problem. I need to somehow tell the phone that it is not roaming or turn off/remove the roaming options all together.

This was not an issue with WM5 at all.



Other than that, I love wm6, but this is a huge issue that is causing great headaches!

Please help find a solution!

-
Roman

http://forum.xda-developers.com/showthread.php?p=1401893&highlight=brad+barnett#post1401893

Above works for email.

Roaming = no joy. Live with it, WM6 sucks in this build. The official AT&T release .. I would think, will fix it.

[romannyc]

There has to be a way to tell windows mobile to ignore it.

[nfrs2000nyc]

Guys, I apologize for the noob question, but Im rather new to palms and windows mobile, so maybe someone can tell me what's wrong with my installation.

1)Dowloaded the file and put it on my 1GB card.
2)Inserted the card into treo 750 (ATT version)
3)Plugged Treo 750 into power (house charger)
4) Did a bootloader reset by holding the media key and pushing the reset pin.

Now, here is the problem...

On the tricolor screen, I see...
Palm Tr
IPL-0.20

Palm Tr
SPL-0.21.0000

On the white bottom portion of the screen, the word serial appears. I have left it like this for over 10 minutes and no change or anything. Am I doing something wrong? Thanks for all the help!

[baires]

You need to format the card in FAT32 on your PC before you copy the file to it.

[treoreloaded]

sorry if this is a repost but do any of you guys can get the Remote Desktop to work. This seem to be a problem with WM6. I used to be able to connect to my home PC via DynDns with WM5? Any ideas...???

Thanks

[reyjabs]

Anyone tried WM6 and Spectec SDW-822 miniSD wifi card? I won't update untill I'm sure I'll get my wifi working....

It does work.

[4u21da]

Alright, I have been using the WM6 ROM on my ATT phone for a couple of weeks and this thing is the Bs and Es, but I want more. I would like to install one of those add-ons or whatever they are called for the today screen. Is it CUBE? Can somebody, anybody, tell me where I can get the CAB files to do this? I would greatly appreciate the help.

[nospoon]

I have been using my unlocked at&t treo 750 (WM5) with t-mobile and the network icon has always had a "G" icon. After I flashed it with the WM6 ROM all went well, but I noticed that the network icon immediately became an "E" instead of "G"

What does this mean? Is it a good or bad thing? Also, do I still have to apply the

Treo750HSDPAhackV2.cab and the treo750audiopatch-att.ppc.cab patches?

Thanks :)

[singhnx]

The E just means that you have EDGE availability as opposed to GPRS (for data communication).

I applied the Treo audio patch. Just to be on the safe side.

[tangosnutz]

I tried on my cingular att treo 750, never gets past the first screen where you need to press end to update

[batrad]

smooth upgrade on my AT&T Treo 750

thanks:)

[tangosnutz]

Thanks guys loaded sunday , it worked when i formated the storage card to FAT 32, works alot better than wm5 only problem i have found so far is bluetooth only picks up half the time.

[PuPpYpWr]

quick question have anyone tried to upgrade cingular treo 750 using the desktop updater and it went thru with no problem

[jamie_bc]

Version Information
• Windows Mobile 6.0 AKU 0.2.4 Build 17746
• CE Image: 1.25
Radio FW: 1.47.25.00

Admin edit: Link removed due to legal complaints from palm.

Installation and Upgrade Guide

• Plug the Treo 750 into a power source
• Load software update onto your miniSD card (CHEEIMG.nbh file). Insert the card.
• Press and hold both the PTTApp Button (lowest button on left side of device) + Pin Reset (next to miniSD card slot). You no longer need to hold the Windows key as well. You will be prompted to press the End key to start the update. This step takes about 10 minutes to complete.
• Hard reset the device when prompted. To hard-reset, hold the End key while pressing the pin reset button. Answer “yes” to “Erase all data” prompt.


Hi All,

I need some advice. Vodafone Australia now has it's WM6 version out and I'd like to upgrade to WM6 using the method above.

However, when I go to download the software I am required to put in my serial number which isn't a Vodafone serial number and therefore I'm unable to download.

Is there a work around for this? How have other people been able to download the software without having a serial number?

J

[jiansworld]

I upgraded and thing went fine.

But I can only use edge and not 3g here in the USA/Midwest. I had to change the accesspoint info just to get edge to work. Is their a different access point I need to use for the 3g?

[braman64]

I'm in the midwest also and unable to get 3g to work with this ROM also.

I upgraded and thing went fine.

But I can only use edge and not 3g here in the USA/Midwest. I had to change the accesspoint info just to get edge to work. Is their a different access point I need to use for the 3g?

[codex_01]

Anybody knows how to revert my ATT WM6 verion to Voda WM5 since this was a vodafone unit?

[jho51e]

Hi All,

I need some advice. Vodafone Australia now has it's WM6 version out and I'd like to upgrade to WM6 using the method above.

However, when I go to download the software I am required to put in my serial number which isn't a Vodafone serial number and therefore I'm unable to download.

Is there a work around for this? How have other people been able to download the software without having a serial number?

J

http://jhosie.blogspot.com/2007/09/wm6-released-for-vondafone-asia-pacific.html

[carlsbl]

I'm in the midwest also and unable to get 3g to work with this ROM also.


Hmmm...I'm glad I read this before I flashed my 750. Can I help you with the settings on my WM5 750? Or did you get this resolved?

[carlsbl]

I'm in the midwest also and unable to get 3g to work with this ROM also.

On my WM5 phone it is wap.cingular

[decipher]

Hey all im trying to find the att 750 rom anyone help me out? thanks

[akuang]

thk~i search log time

[shadow_1037]

I have upgraded to the WM6 AT&T ROM as well and the first thing I noticed was it is FAAAASSSST! Wow...what a difference. All of my apps work, and I did have to get a new product code for TomTom6. 3G works fine (HSDPA, UMTS, EDGE, GPRS).

My only issue is with Bluetooth...it tends to get lost and not provide audio (BT car kit or BT earpiece) or loses the GPS receiver. After turning off/on Bluetooth it resumes working...interesting...

Another Bluetooth issue is with using the "External GPS" to manage my GPS device. If this is enabled I cannot use my BT ear piece or BT car kit when using the GPS receiver.

Anyone else seen these issues?

[StevoDevo2]

I upgraded my ATT phone using this image and everything works great, except that I can not get the Dial Up Networking via Bluetooth to my laptop to work anymore. I have struggled around with this for a few days now and am getting nowhere, so I was wondering if anyone else had struggled with this?

[jbcross]

I upgraded my ATT phone using this image and everything works great, except that I can not get the Dial Up Networking via Bluetooth to my laptop to work anymore. I have struggled around with this for a few days now and am getting nowhere, so I was wondering if anyone else had struggled with this?

Not sure if this is at issue but did you try to disable the cingular proxy settings?

Disable ATT Proxy
[HKEY_CURRENT_USER\Software\Microsoft\Windows\Curre ntVersion\Internet Settings]
The default setting (that uses the proxy) and the setting sets the value to is:
"EnableAutoDetect"=dword:00000000

The DisableCingularProxy.cab file changes it to:
"EnableAutoDetect"=dword:00000001

[kforman3]

hey i have an att 8525 and for some reason i have followed all the steps to update my rom but when i get to the part where it actually is supposed to start the process my phone hibernates and the process fails because it looses connection

does anyone no why this is happening and how i can stop it????

please reply to me at kforman3@hotmail.com thanks!!!!!!!

[singhnx]

hey i have an att 8525 and for some reason i have followed all the steps to update my rom but when i get to the part where it actually is supposed to start the process my phone hibernates and the process fails because it looses connection

does anyone no why this is happening and how i can stop it????

please reply to me at kforman3@hotmail.com thanks!!!!!!!

It might be because you're using the Treo 750 file to update your HTC 8525??

This rom won't won't work on that device. Try the TyTN formums.

[tmknight]

hey i have an att 8525 and for some reason i have followed all the steps to update my rom but when i get to the part where it actually is supposed to start the process my phone hibernates and the process fails because it looses connection

does anyone no why this is happening and how i can stop it????

please reply to me at kforman3@hotmail.com thanks!!!!!!!

you need to be in the 8525/hermes forum - all the answer you need are there - search!
:D

[~~Tito~~]

Will this work by chance on a preproduction model of a vonda phone treo?

[mccune]

Will this work by chance on a preproduction model of a vonda phone treo?


As long as it is the HTC Cheetah it should work if you ask me :)

[csabi72]

Version Information
• Windows Mobile 6.0 AKU 0.2.4 Build 17746
• CE Image: 1.25
Radio FW: 1.47.25.00

Admin edit: Link removed due to legal complaints from palm.

Installation and Upgrade Guide

• Plug the Treo 750 into a power source
• Load software update onto your miniSD card (CHEEIMG.nbh file). Insert the card.
• Press and hold both the PTTApp Button (lowest button on left side of device) + Pin Reset (next to miniSD card slot). You no longer need to hold the Windows key as well. You will be prompted to press the End key to start the update. This step takes about 10 minutes to complete.
• Hard reset the device when prompted. To hard-reset, hold the End key while pressing the pin reset button. Answer “yes” to “Erase all data” prompt.
• To verify the software, hold the Down-Arrow while pin-resetting. You will see:
o Firmware: R 1.47.25.00
o ROM: D 1.25
o Keyboard: U 26
• The Bootloader can also be confirmed by holding down the PTT button and pin resetting (without the updater miniSD card inserted)
o SPL: SPL 0.24

**SIDE NOTE**
People may want to mirror this before Palm steps in and makes XDA remove the link...

I did the whole procedure, everithing was successful, accept i was never prompted for the hard reset, so i just did it, and i em back to square 1 win. mobile 5.
Any advise? Thank you

[chrys7]

I did the whole procedure, everithing was successful, accept i was never prompted for the hard reset, so i just did it, and i em back to square 1 win. mobile 5.
Any advise? Thank you


Same thing happened to me my card wasnt fat32 once I did that everything went fine


ATT Treo 750 <-

[cingulartreo]

Palm is supposed to release the official official wm6 rom 10/15/07.

[JJIG]

I just brougth a Palm 750v with the following Version:
OS 5.1.195 (Build 14959.2.3.2)
Software Version TREO750-1.12-VFF
Hardware Version: A
Firmware Version: 1.17.20.00

Questions:
a) Could the software version be updated to a later grade
b) If yes, What a need to do

Thanks

A real rockie

JJ

[reyjabs]

Will this work by chance on a preproduction model of a vonda phone treo?

Never heard of this model:o

[reyjabs]

http://jhosie.blogspot.com/2007/09/wm6-released-for-vondafone-asia-pacific.html

you can also use this link,
http://palmone.r3h.net/downloads.palm.com/Treo750_2_19_H3E_DesktopUpdater.zip
courtesy of http://jhosie.blogspot.com :)

By the way, thanks jhosie, I now have

Palm Treo 750V (Unlocked)
Official WM6 Aussie Version (Vanilla)
2 Gig Sandisk MiniSD Ultra II
SDW-822 miniSD wifi card

and it's working great with

Memaid
WIFI DashBoard
EWallet
Treo Alarm
WorldMate Pro
HSDPA Hack

[reyjabs]

I actually want to change the bands which are offered under that tab. I want to put in GSM(900+1800)+UMTS(850) which isn't a choice.

Use the Aussie ROM
http://palmone.r3h.net/downloads.palm.com/Treo750_2_19_H3E_DesktopUpdater.zip
Delete the Extrom Files
Hard Reset then go to
Aettings > Personal > Phone > Services > Band Selection

Palm Treo 750V (Unlocked)
Official WM6 Aussie Version (Vanilla)
2 Gig Sandisk MiniSD Ultra II
SDW-822 miniSD wifi card

[GMcDonnell]

Palm is supposed to release the official official wm6 rom 10/15/07.

Where did you hear this?

I'm not doubting you per se, I've just seen rumored dates come and go with no release. I'd just as soon have the "official" official release if it's going to be available in a day or two but I don't want to wait indefinitely.

[sincloge]

Where did you hear this?

I'm not doubting you per se, I've just seen rumored dates come and go with no release. I'd just as soon have the "official" official release if it's going to be available in a day or two but I don't want to wait indefinitely.

:) so far as i know from sources in At&t the release is coming soon outside of that cant say more

[clbw]

According to what I was told by ATT and Palm on Oct 12th, is that they have not officially given a release date as the ROM is not ready for distribution, and that any previous date given was pure speculation on the part of eager customer service reps they also apologized for the misinformation.

As a frustrated ATT customer I have been bugging them with daily phone calls and emails for a little over a month for when WM6 will be released, every time I speak with ATT or Palm I either get a different date i.e. the 9th, 12th, 15, 23rd, etc... Anyway I would not expect anything to be released today or anytime soon. :(

[surplusstuff]

I was also waiting for the "Official" AT&T release but when my phone did not allow me to answers calls and did not let me place calls again during the work day I had had enough. The customer reps at Palm had told me WM6 was coming “Soon” two weeks ago, and I was tired of waiting for my email Brick to be upgraded. It was either upgrade my Treo or smash the thing to smithereens and be done with it. I spend about 20 minutes preparing for the upgrade, picked up an inexpensive 1GB mini SD card and followed the instructions. The result was an extremely versatile and reliable phone device. I have marveled at how all of the features of the phone now work perfectly and flawlessly. I can’t believe AT&T has waited so long to release a fix for a really bug riddled phone that would constantly lock up and not even allow dialing when needed, without a reboot. What if I needed to dial an emergency number when the phone locked up, I would have to wait for a reboot? I think not. Anyway don’t hesitate to upgrade.

[skyeskye38]

Which version did you use to upgrade? I'm ready to try for the same reasons.

[Snyper711]

I had a few questions. Is the button on the bottom left the one with the magnifying glass? Is that the one you have to hold while pressing the reset button? I'm holding that and pressing reset while having the file loaded onto my memory card but it is not asking me any question and simply loading windows mobile 5. I've formatted my card into fat32. It's like the version I have of WM6 is not being recognized. Does anyone have a good copy since they've started cracking down and making it difficult to find. Any help would be greatly appreciative. Thanks!

[jlsniu]

Its the bottom button on the left side of the device and the reset button. I had the same question.

[At0mAng]

Are there any AT&T tweaks to apply if you are going to use the Aussie ROM?

[mtiberio]

I have waded thru 63 pages on this thread. Very little mention of whether "good technology" software works under the wm6 ROM. Does it? How do you load it? GetGood.html?

[jbcross]

just go to http://get.good.com
it works just fine.

[At0mAng]

OK so I upgraded to the Aussie WM6. Now I do not have any data connections. Is there a work around? My provider is AT&T. I searched around but could not find any answers. Do I need to go back to the AT&T ROM?

[singhnx]

OK so I upgraded to the Aussie WM6. Now I do not have any data connections. Is there a work around? My provider is AT&T. I searched around but could not find any answers. Do I need to go back to the AT&T ROM?

Try searching for the ATT internet settings. You can create a new entry in the connections. Included with these settings should be the sms number as well as the mms settings.

Good luck

[jlsniu]

I have to set the internet connection sharing to Bluetooth PAN and ATT (not ICS) then manually hit the connect button, then hit the Bluetooth > Join Network on Treo in order to get the data connection on my mac.

[GMcDonnell]

Where did you hear this?

I'm not doubting you per se, I've just seen rumored dates come and go with no release. I'd just as soon have the "official" official release if it's going to be available in a day or two but I don't want to wait indefinitely.

Well, I bit the bullet and installed the leaked AT&T ROM. So far I'm very happy that I did. WM6 is working great!

Many thanks to the OP and other folk for spending the time and effort to describe the process, potential pitfalls and workarounds - your help was essential and is appreciated.

[At0mAng]

Try searching for the ATT internet settings. You can create a new entry in the connections. Included with these settings should be the sms number as well as the mms settings.

Good luck


Thanks for the heads up. I replaced the files in the extrom with the AT&T ones and seems to be working now. It may have been how I setup the phone after I did the Aussie install the first time cause after I reinistalled it I did have data connections even with the Aussie files in the extrom...

[jerms1031]

Does anyone else have a link for the AT&T WM6 upgrade? It would be greatly appreciated!!

[Bucket]

Does anyone else have a link for the AT&T WM6 upgrade? It would be greatly appreciated!!

What are you talking about your imbecile?

This is the "leaked" rom, not the official one.

If you want links read this post, there are at least hundreds of them!

[GMcDonnell]

My 750 has greatly improved battery life with WM6 and the AT&T addon software removed. I no longer have to charge it every day.

No bugs yet, everything is snappier (though it's certainly not night and day).

Charging while tethered is a welcome enhancement too.

[singhnx]

The extra charging while connected to the computer might be why it feels like you don't have to charge it every day. :)

[GMcDonnell]

The extra charging while connected to the computer might be why it feels like you don't have to charge it every day. :)

No, that's not it - I don't tether it at all during the day, I'm out and about and I sync up to my desktop relatively rarely.

What I'm seeing is that I can now use the phone for 2 days without recharging if I need to. With WM5 the battery would be at around 30% at the end of every day - since upgrading the battery has been over 60% at the end of the day.

[risaxu]

Okay; I'm a TOTAL newbie with all of this so I'm sorry.
BUT !

Reading through all the replies to this thread AND finding extra help through other websites, I still cannot upgrade to WM6.

I checked the memory card; it's already FAT32.

HELP ?!

[brwalias]

manfly9884
Reset it.

Reflex680
It's for 750 only!
Can someone explain to me why the 750 gets an upgrade before the 700wx or why not give the upgrade for both? The 700wx has been around longer and has a broader client base- i feel as though I'm getting slighted!

And why wouldn't this upgrade work on a 700wx, aren't they practically the same device?

b

[Bucket]

Okay; I'm a TOTAL newbie with all of this so I'm sorry.
BUT !

Reading through all the replies to this thread AND finding extra help through other websites, I still cannot upgrade to WM6.

I checked the memory card; it's already FAT32.

HELP ?!

Read this post from the beginning! Simple.

[risaxu]

Read this post from the beginning! Simple.

lol; I did.
I did EVERYTHING that was head in the main post.

It says SERIAL after the PPTApp button + Pin Reset.

[singhnx]

lol; I did.
I did EVERYTHING that was head in the main post.

It says SERIAL after the PPTApp button + Pin Reset.

Did you make sure that your miniSD card is formatted in FAT32?

[Phy]

For those who absolutely cannot load WM6 from their FAT32 miniSD card, try this:

When formatting the SD card, the Allocation unit size was set to 4096 bytes. I finally got my WM6 to load when I changed it to Default allocation size.

After that, the flash worked great, the Update Success message displayed, I rebooted, and the WM6 splashscreen displayed.

That was the magic bullet for me. hth.

[risaxu]

Did you make sure that your miniSD card is formatted in FAT32?

Yes; I did.

I think it may possibly have to do with the fact that my computer is windows vista.
I'll take Phy's advice and changing the allocation size.

[singhnx]

Yes; I did.

I think it may possibly have to do with the fact that my computer is windows vista.
I'll take Phy's advice and changing the allocation size.

You might also want to consider formatting the card using Resco Explorer. That's how I did it. Resco Explorer installs on your Treo and it's got a 14 day trial license.

[amanickam]

I was so sick and tired of both AT&T and Palm pointing fingers at each other and just went ahead with this upgrade.. and it works!!! so far no issues..

A BIG THANKS TO THE PERSON WHO MADE A MIRROR AVAIALBLE.

THANK YOU THANK YOU THANK YOU..
AyKay

[kdizzle 8125]

It worked so far....WM6 seems way nicer too!

Kesh

[arishec]

I was so sick and tired of both AT&T and Palm pointing fingers at each other and just went ahead with this upgrade.. and it works!!! so far no issues..

A BIG THANKS TO THE PERSON WHO MADE A MIRROR AVAIALBLE.

THANK YOU THANK YOU THANK YOU..
AyKay

where can i find the upgrade software? thanks

[kirk1233]

I did the upgrade last night and everything went well except the screen refreshes seem slower at times and the ringers are not as loud at top volume. Did anyone else experience these problems?

[kirk1233]

It also broke my ability to tether!

[jt469]

where can i find the upgrade software? thanks

Thanks to kortez for the software mirror on post #6
http://forum.xda-developers.com/showpost.php?p=1399915&postcount=6

Did the upgrade last night and worked great. Had to format the 2gb SD for FAT32 using resco explorer since I was getting the serial error. Took about 10 minutes to load the new ROM, which does list as TREO750-1.13-ATT. I think SecureROM mentions it should be 1.25, but everything works. Screens are much faster and clean. Getting almost 900k d/l on dslreports and the exchange email works flawlessly.

MSN mobile is missing (don't use it)
U can change languages in regional settings (didn't get this option on load)

Thanks to all that posted on this topic. Good luck to all that give it a go.

[bellington74]

So I finally got tired of listening to Palm say very soon, for 6 months. I have downloaded adn succesfully installed the ROM. Now for the noob question. Is there any advantage to keeping or deleting the EXTROM Folder. I have installed and done it both ways, and I actually like using some of the features in the EXTROM, but not keen on the los of 9MB of storage, when storage on the 750 is slim to start with. Anyone offer a piece of advice?

[trjons]

I just deleted out the folder and use it for my own storage.

[manfly9884]

I just deleted out the folder and use it for my own storage.

Same here, and so far with no problems.

[tmknight]

...Is there any advantage to keeping or deleting the EXTROM Folder. I have installed and done it both ways, and I actually like using some of the features in the EXTROM, but not keen on the los of 9MB of storage, when storage on the 750 is slim to start with. Anyone offer a piece of advice?

If you like having the provider software (aka bloat) loaded on hard reset, then the compromise would be to mount the ER and leave the data in tact. You can still utilize the left over space for personal use. Should leave you with about 4-5mb to play with. Some folks have extracted that software into separate CAB files; do a search and you may just find the software you want, then you can get rid of the provider stuff in the ER and have the whole 8.5mb at your disposal.

[fffizzz]

http://forum.xda-developers.com/showthread.php?p=1401893&highlight=brad+barnett#post1401893

Above works for email.

Roaming = no joy. Live with it, WM6 sucks in this build. The official AT&T release .. I would think, will fix it.

I have seen a few posts about the roaming icon.. Is it actually "roaming", or just ms being stupid and displaying the icon?

[fffizzz]

Not having an issue with the roaming bug, upgrade was surprisingly simple! Seems about the same, maybe a little faster in some areas, but overall it looks nicer.

[Docsboard]

Has anyone been able to flash radio ROM only on the Treo 750?
I'm dropping calls on AT&T and have no signal way too often, want to aviod a full ROM upgrade if possible, I know you can flash just radio on TyTn & not need a hard reset, any pointers?
My software Treo750-1.15-VFE
Hardware Version A
Firmware 1.47.25.00

Vodafone branded 750v used in US on AT&T with WM6, been working ok till about a month ago, I tried to reupgrade ROM recently and got an unsupported device error

[professionalman]

US AT&T Treo 750

Copied the cheeimg.nbh file to SD card. Performed hard reset as directed (left button and pin reset).

When the screen comes back, I get red bar, green bar, blue bar, white bar, with this text on screen:

Palm Tr
IPL-0.20

Palm Tr
SPL-0.21.0000

and then the word 'Serial'


Any ideas what the hell is going on?

[chapais]

I have a Treo 750 with AT&T (Cingular) I've downloaded the WM6 file to my mini sd. Now what? How to I get it installed? I tried the instruction from the first post but nothing.

[dddsj]

can someone please re upload wm6 rom for att cingular, thanks alot

[summiter]

For any number of reasons, the ROM image isn't being found on your memcard. It could be corrupt.

Format the card fat32, and copy the cheeimg file over to it again. If you still have a problem, download the ROM image again and give another go.

US AT&T Treo 750

Copied the cheeimg.nbh file to SD card. Performed hard reset as directed (left button and pin reset).

When the screen comes back, I get red bar, green bar, blue bar, white bar, with this text on screen:

Palm Tr
IPL-0.20

Palm Tr
SPL-0.21.0000

and then the word 'Serial'


Any ideas what the hell is going on?

[reyjabs]

US AT&T Treo 750

Copied the cheeimg.nbh file to SD card. Performed hard reset as directed (left button and pin reset).

When the screen comes back, I get red bar, green bar, blue bar, white bar, with this text on screen:

Palm Tr
IPL-0.20

Palm Tr
SPL-0.21.0000

and then the word 'Serial'


Any ideas what the hell is going on?

You can't perform a hard reset if you've got a mini SD card inside with a cheeimg.nbh file on it. If you want to hard reset your treo, you need to take out the miniSD card. If you want to upgrade your ROM, then use the PTT button ( the one below the volume rocker on the left side of your Treo) simultaneously with the pin reset.:D

[allensw74]

i put the leaked rom on my 750 and the only complaint i have is when i go to my wap locker to redownload all my ringtones that i had before, i click on the download link on the page but the windows download screen never comes up to ask if i want to download?? any suggestions?

[cincy1020]

Hi:
Does anyone know if either of these options will work on a locked AT&T 750?

http://www.palm.com/id/support/downloads/treo/750vupdate.html

http://www.palm.com/nz/support/downloads/treo/750vupdate_recovery.html

I need to go back to WM5, and was hoping one of these might do the trick.

Thanks!

[andrewd]

can someone email or PM me the link

thanks

[luniz97]

Can someone pm me the link for the att wm6 upgrade? Thank you.

[doublesh0t]

If one installs this upgrade, and for whatever reason, needs to send the device in for service, will they be able to hard reset the device back to WM5? Also, when the official upgrade comes out, is it possible to flash it to the official version?

[reyjabs]

If one installs this upgrade, and for whatever reason, needs to send the device in for service, will they be able to hard reset the device back to WM5? Also, when the official upgrade comes out, is it possible to flash it to the official version?

Answers!

1. No
2. Yes

[hyggen]

I updated my treo750 a few months back to WM6 and am currently wanting to do the same with my wife's 750v. I thought I remembered....I have the cheeimg.nbh on the mini-sd. I hold the ppt (bottom left button) and reset. It starts by saying upgrade for a split second then just the color bars come up with "serial" on the bottom and nothing happens. What am I doing wrong this time?

[BamBam75093]

Where can I get the latest WM6 rom?

Let me know
thanks in advance

[reyjabs]

Where can I get the latest WM6 rom?

Let me know
thanks in advance

Here http://forum.xda-developers.com/showthread.php?p=1570374&mode=threaded#post1570374 :)

[N8NU]

I've formatted my 1G card to fat32 and copied over Treo750Radio154.nbh.

I then press the PTT and reset. I quickly see the grey loading screen and then it goes to the chee100 IPL-0.20 'serial' screen.

What am I missing?

[minilog118]

ok so i have read most of the thread but just to make sure this is ATT, USA ,ENG, locked ,right? i see alot of other people installing it witch mixed me up.

[nfopirate]

Hey. I mirrored the Official WM6 for AT&T Treo 750 Upgrade.

Find it here:

http://pclove.us/?p=26

On the page are the SD Card and Desktop Updaters/ROMs and the How-To. Enjoy.

[dwallersv]

This is only for WM6,
Do not use on WM5,it will be nothing to work!



http://forum.xda-developers.com/showpost.php?p=1406616&postcount=234

now i could unlock Extrom.
enabled to write and delete files in there.
But some of my friends couldnt.

i am not sure the reason:confused:,
so Guys, i need you to test this files

***New Test Version*****(Edited Aug.8th)

@DL zip files from following link.

@Extract zip and find 2 cab files.
*1_CHEE_MountExtROM.CAB
*2_Chee_Extrom_rename.cab

@Install [1_CHEE_MountExtROM.CAB]
and make soft reset.

You should see the Extrom now.

@Install [2_Chee_Extrom_rename.cab]
and make soft reset again

*Now [Extended_ROM] was renamed to [ExtendedROM]

@Start Menu--Programs---and excute [Chee_Extrom_Unlocker]
*Try to 3 or 4 time

And make soft reset againg. you got unlocked ExtendROM as strage 9MB.

hope this can work.

I get the "Insert Key failed!" error message. I'll try it several times to see if that fixes it.

I'm guessing the reason you're distributing this as a CAB is to make it easy for more novice people (and that's appreciated, for sure!)... However, if this is just some changes to the registry, would you mind posting the key/value pairs for those of us comfortable with editing the registry? I'd appreciate it greatly.

The key/values I'm talking about are the changes necessary to unlock the rom. I'm already familiar with the keys in the StorageManager necessary to unhide it, and set/change its name.

[muertekjam]

Hey. Where can i download the ROM???

[dbarber@dedicatedmicros.c]

The official release is now available on Palm's site or from ATT Wireless site. It does require you to input your serial number of your device.

[ilordvader]

Is there any freeware for Telenav on the Tilt
than paying $10 per month
like we did on the Mobi Tv & Xm Radio :p

[romeo_1593]

Is it compatible with JAQ3 ?

[JJIG]

I give my TREO 750v with software 1.12-VFF to a friend of mine because he knows how to update to WM6, and he did, the problem he updated to French WM6, and I dont understand nothing about French, Is there a way to change to English? or I need to install another WM6 upgrade in English, and if so how I do?

I really need your help, and I know I was a dump because of these but I really need step by step guidance on how to solve this matter.

Thanks

J.J.

[khuongmpi]

thanks a lot

[deybi]

Hey Mark - I'm doing a hard reset on a device now and will send ya the pristine reg after I get rescoexp back on.
ga
--Summiter

gracias espero elink de nuevo

[shaunehannen]

i am in desperate need of a rom for ATT palm treo 750:(!!! CAN ANY ONE HELP ME??? I would prefer 6.1 because it has threaded messaging. I had 6.1 but upgraded to 6.5 to see what it is like but 6.5 lacks a lot of features(MMS, Video Playback, non pixelated icons). I installed arcsoft mms to it but i dont know how to configure the network!! CAN ANYONE HELP??? please, i need a rom, or at least help me to configure my MMS settings:(:(:(:(


Thanks
Email me please!!!
shaunehannen2009@yahoo.com

[whitetreo]

I'm looking for the ATT WM6 rom as well. I love threaded texting also

[character]

where can I get the ROM update please do post a working link the link that was posted on palm no longer exists

[tristanstewart]

http://750.teamus.us/wm6/