[TUT]bepe kitchen for trinity user howto...kook your rom!!!

[ervius]

Hi, I'm preparing all you need to kook a italian rom by yourself...
in some minutes 1st part, with programs that you need to extract .nb files from .nbh, and reassemble .nbh as you like, how to dump a rom and how recompile it..
bye!!!

ok, the utilityes you need are:

*** all utilities are ready to download in the end of this post!!! ***

1) nbhtool_trin.rar
2) package_tool.rar
3) nbdumper.rar
4) bepe_kichen_trinity_ita_WM-6.1.rar

6.1 bepe_kitchen.rar


5) Flash_nbh.rar (included into kitchen!)
6) rgu to xml transform an rgu or a reg file into a provxml file!!
7) dsm patcher to update also the dsms files to respect the rom's os and build version


1) nbtool from dutty is usefull to decompile/recompile nbh , decompil enbh, choose nbh to decompile, you have 1 or more .nb files, windows.nb is that you need, the rom, you should find also:
radio.nb (radio)
first/second_splash.nb (the 2 images shown as splashscreens!!!)
ipl.nb (boot of trinity...)
spl.nb
and other that now I not remember...
................
to recompile the nbh file, just select that you need (os.nb, first.nb second.nb)
for my experiences, try first times only with os.nb, choose the file and compile the nbh files,your rom is ready to be flashed into device...

2) package tools analize the dumped os windows.nb and tell about sys and oem versions, more it creates packages of dumped rom, and insert all files into the 2 system directory "oem" and "sys" with button (menu) "build packages"

3) nbdumper from tadzio, it is the important tool togheter bepe kichen, with it you are able to dump "windows.nb"
put windows.nb into the folder, dos prompt and write:
nbdump windows.nb (then press enter...)
in few minutes you have inside also the directory named: windows.nb.dump, iside you can find all files that will be in rom on your device...
4) now open package tools by bepe, search this directory, and analize, after analizing, click on build packages...
after some time, you in "windows.nb.dump" directory have: sys and oem folders...
this is the real os...
now you neeedd xip directory...
copy windows.nb into the directory named:XIP_extract (that you can find in "bepe_kichen_trinity_ita" tool...
copy it into the directory, rename from windows.nb into "os.nb"
click on "Make_XIP.bat" and then you have "xip" folder...
copy xip folder into "rom" folder in of "bepe_kichen_trinity_ita", copy os.nb too into "rom" folder, so you have rom folder and inside:xip fiìolder and os.nb...
ok...
now, oem and sys folder obtained with package tools, copy them into "bepe_kichen_trinity_ita" tools, and you have:
oem, sys, tools, xip_extract and rom folders, and the exes...
now is ready...
you have to click on "buildos.exe" and the rom will be build, ok, now there is a new folder, "temp", now you have finished, only click on createrom.bat and in few seconds you can find into \temp\ folder a file named os-new.nb, this is the new rom, build .nbh with dutty nbtools, and can flash it on your device!!!
5) to flash put nbh created into folder:Flash_nbh, flash....
next, tools and howto: create extended_roms;create own splashscreens, adding own packages (the packages are additional programs... into I left yet 3/4 packages from mine!!).....

************************************************** *****************
I must make all credits also to udK, that discovered with me the right way to kook roms...
and invite all people to make some dotations to him, for the hard work that he made to have a good italian rom to mount on our devices!!!

thanks friend...

************************************************** *****************

I think is better to try with udk or lasagna roms to start, they are perfext and logically structured as bepe kichen wants!!!
bye!!!

************************************************** **************************************
*
* P.S.: and finally I think that if you decide to use udk rom to make experiments, you have to donate him,
* and if uou want to use lasagna rom to learn to use bepe kichen, also you have to make donations to guybrush.
* they worked hard to translate the rom, you must donete to use theyr roms I think is the only think to do
* to tell them "thanks!!!", really...
*
************************************************** **************************************


++++++++++++++++++++++++++++++++++++++++++++++++++ ++++++++++++++++++++++++++++++++++++
lesson 2:
how make own splashscreen!!!
just open an image or create one, with also paint;
make it 240x320 pixels, 240 in width, 320 in height...
save it as bmp, with 24 bits...
open it with nb_image_converter

convert to "nb"
save it as first and second.nb...
now, if you don't have windows.nb use dutty's nbtools to extract from rom, reuse nbtools to compile nbh, add
in os: windows.nb
in "first splash" the file first.nb
in "second splash" the file second.nb...
compile nbh file and flash into ppc, when you finish, you can see you freferred splash screens!! ;)

next:
create a package and/or translate the exe/mui files in your language with resource hacker!!!


try to open an exe, or first a mui files if there is into the package!!
you can see:
icon (you are able to change it , but is not important for us!!)
dialog, you can move the object inside them, rename or translate strings and other...
string table, here you can change, translate in your language tje strings of mui/exe!!!
and other, but for modify translate this basts!!
see later!!! bye!!!

++++++++++++++++++++++++++++++++++++++++++++++++++ +++++++++++++++++

lesson 3:
for mui:
if you have traslated them, you have also to rename: exaple, if therer is amui xxx_409.mui, in english of couse, and you stranslated it into italian, you hace also to rename it by xxx_409.mui to xxx_410.mui!!!
and for italians mui you can use the ones from tynh wm6 Italian rom!!!

and also initflashfiles.dat must be traslate...:


and also rgu files:example:
string: "programs" must became "programmi"
string: "my pictures" must became "immagini"
etc.etc.

howto: CREATE A PACKAGE!!!
ok, download theese utility:

wince cab manager from here:
http://www.ocpsoftware.com/
(full funcional trial for 15 days!!!)

and my utility: packages creator (a little tools of mine!! ;) )
from here:
-------------------------------------------------------------------------------
UPPED:

(new version... bugs solved... option improved!!!)
now in bilingual ITA/ENG, and with more option to personalyze your new packages!!
new beta with more and more options to create initflashfiles.txt...
flag:"simulate folder names" on wince cab manager and put reg file into package folder you choice...
example: "...\trypackage\windows\batterystatus\batterystatus .exe"
you have to put reg file into "...\trypackage\to-import.reg" ok???
and here the new beta of package creator!!!

Hi all, from a Bennec83's Idea I released this last version that works with cab analyzer, and make packages from cab files automatically...



*******************************Re-reupped 1st good working release!!! 4.1 *********************

-------------------------------------------------------------------------------

ok!!!!
P.S.: if th bepe kichen shows an error during the kook operation, it will be becouse there is another file (duplicate file) yet present in rom, delete it from other subfolder, not in the package just inserted...

next appointmant to create own extended_rom!!! and some triks on registry (modifing rgu files!!!)
see you!!! ;)

++++++++++++++++++++++++++++++++++++++++++++++++++ +++++++++++++++++++++++++++++
lesson 4 playing with extended rom:
howto: create and use extended roms...
ok, have to download the utility htc_extended_rom_editor


I think is all.... (for now!!!)
your knowledge about roms, its components, how to dump, build, add packages are full... rests to edit rgu and provxml...
but in next days....

bye bey and good experiments!!! ;)
************************************************** *******************************
*********************************** ******************************
*********************************** UPDATES ******************************
new version of buildos+packagetools, some imporvements, and context menu on packages to enable/disable them by default!!
new version of buildos, now:
1) xip porting for os ber updating;
2) updater for Rom Creation Date;
3) Updater for Rom version at Boot screen!!!
enjoy!!!



improved some context menus on selected package.....
xip porting for OS version and Rom's Date creations Updater!!



new version of package creator, to have own directory where place shortcuts, and some minor bugs solved
here: and added links in initflashfiles.txt for .htm files for "Help"!!!

P.S.: I need beta testing for my apps, becouse, I go on programming and there are allwais same bung into...
bye!!! ( a big thanks to guybrush and udk for testing and support, but specially to Vibranze for testing package creator!!!)



************************************************** *******************************

[udK]

Traduzione in italiano della guida del Kitchen

Lavori in corso..

[D@vide]

Hi, I'm preparing all you need to kook a italian rom by yourself...
in some minutes 1st part, with programs that you need to extract .nb files from .nbh, and reassemble .nbh as you like, how to dump a rom and how recompile it..
bye!!!

thanx, let's start cook togheter :rolleyes:

[ervius]

--reserved for packages--

I only hope that my 3d iwill be usefull to be better, and share togheter a lot of packages for our trinity devices!! ;)
see lather...

[cicciocant]

I love you.
This is what I searched for long time.

Two question.

1) What difference there is between this and Orginiale Bepe ROM kitchen form Hermes.
2) Can I use all ROM that i Want to start the cooking?
....
3) This is possible some mirror not rapidshare? (for example www.divshare.com)


Grazie mille.
Viva il P3600.

[ervius]

I love you.
This is what I searched for long time.

Two question.

1) What difference there is between this and Orginiale Bepe ROM kitchen form Hermes.
2) Can I use all ROM that i Want to start the cooking?


Grazie mille.
Viva il P3600.

1) infinite greetings to bepe for the beautifull tool...
the kichen is the same, only you have os and xip for trinity (after you extrapolated oem-sys folders and xip!!!)
2) you can use all roms you want, also in other languages, but only if they , after you dumped and analyzed with bepe package tools, and have oem and sys folders (and xip folder...), but if you try with roms that have missed files, you must try to insert them into oem or sys dolder, you, after use bepe package tools must see only "oem" and "sys" folder, nothing else, to know that the rom is really ok..., in other case the rom was built in confused mode or with other utilities, that I consider oldier...
bye!!!
and my final point is also share a lot of packages....
for now I think it's all, but in few days I explain also howto build packages and other....
see you!! ;)

[Guybrush]

ervius, very good tutorial i think it'll be useful not only for italian people but for everyone who want learn how to cook their own rom. Just a tip...be careful, read everything and try to understand how these tools works and check everything before try to flash your device.

[ervius]

ervius, very good tutorial i think it'll be useful not only for italian people but for everyone who want learn how to cook their own rom. Just a tip...be careful, read everything and try to understand how these tools works and check everything before try to flash your device.

yes... by attentions, use the tools at own risk, and specially use them with "brain"!!! ;)
bye!!

[morf3o]

Thanks ervius! you are truly "mythical". I`ll read all with much attention tomorrow, now i`m seat in one park bench to 5 meters from the sea.....


Hi...... morf3o.

[ervius]

added lesson 2 (how to create/modify images and create your splashscreens at ppc boot!!!)
at first post!! ;)

see you later to build our first package!!! ;)

[cicciocant]

I tried this tools with Lasagna 205 ROM.
I arrived to package tools
When I press "Build Packages" I've this error:

Syntax error map.txt:
tom

tom is the last lin of map.txt.
Can i delete it witouth problem?

At the end I've also the OEM and SYS directory but there are also three file out all directory:
Recorder.exe
Voice Recorder (link)
Recorder.exe.0410.mui

It's ok?

One Advice.
To arrive at DUMP directory and afther to OEM and SYS I found more easy and fast this way:
http://forum.xda-developers.com/showthread.php?t=316940


Thanks 1000!

[ervius]

I tried this tools with Lasagna 205 ROM.
I arrived to package tools
When I press "Build Packages" I've this error:

Syntax error map.txt:
tom

tom is the last lin of map.txt.
Can i delete it witouth problem?

At the end I've also the OEM and SYS directory but there are also three file out all directory:
Recorder.exe
Voice Recorder (link)
Recorder.exe.0410.mui

It's ok?

One Advice.
To arrive at DUMP directory and afther to OEM and SYS I found more easy and fast this way:
http://forum.xda-developers.com/showthread.php?t=316940


Thanks 1000!
so, you have to install also java virtual machine... with this utilities in not necessary...
thanks ciccio but i'd like to continue with bepe's kichen, do you like use it??
ok...
3 files are out, put them into \oem\oemapps\ directory, so you now have only oem and sys directory, then... extract xip etc... etc...
ok!!!

[cicciocant]

thank's for your answers.

I like also Bepe's Kitchen. GO ON!

For the Syntyax error?
I've to delete "tom" at the end of map.txt?

[ervius]

thank's for your answers.

I like also Bepe's Kitchen. GO ON!

For the Syntyax error?
I've to delete "tom" at the end of map.txt?

I don't have your error, but if finally you have oem and sys folders, then it works well...
but you can try to delete and post if it work...
bye!!

[saminegm]

In my understanding all this tools are working with ROM files you already found "somewhere".

What I want to do first is getting a working ROM out of a Trinty device. E.g. I have a german Vodafone device with the Vodafone custom ROM. I simply want to "copy" this ROM on my Harddisk. No changes. I only want to be able to flash it back if I want to, to have the device in the same state it is now.

Which tool do I have to use?

What do I have to do?

[claros]

Check this article
http://wiki.xda-developers.com/index.php?pagename=Hermes_HowtoDumpRom

Ciao

[morf3o]

A question ervius:

we suppose that I succeed to modify/create my first ROM, exists a way in order to test it without flash on my device? A way for being sure that if I flash, i do not burn my trinity....

Thanks........ morf3o.

[udK]

exists a way in order to test it

The only way is flash your trinity and hope :D

[saminegm]

Check this article
http://wiki.xda-developers.com/index.php?pagename=Hermes_HowtoDumpRom

Ciao


Thanks... that is what I was looking for. I found this (http://www.modaco.com/Paul-s-guide-to-backin-t255090.html) in the meantime. But the two guides differ: Paul says, that I only need the Part02.raw file. Why?

[claros]

Thanks... that is what I was looking for. I found this (http://www.modaco.com/Paul-s-guide-to-backin-t255090.html) in the meantime. But the two guides differ: Paul says, that I only need the Part02.raw file. Why?

Your OS is in part2, first two parts are the XIP partition aka your boot sector.
Ciao

[saminegm]

Your OS is in part2, first two parts are the XIP partition aka your boot sector.
Ciao

Ok.... but ... do I need those first two parts to (re)flash? (Sorry for my ignorance).

By the way: Di dove siete?

[sammy_deluxe]

I have a german Vodafone device with the Vodafone custom ROM. I simply want to "copy" this ROM on my Harddisk. No changes. I only want to be able to flash it back if I want to, to have the device in the same state it is now. Soll ich Dir ein Vodafone Rom bauen?

Other Postings: http://forum.xda-developers.com/showthread.php?t=238945

http://www.ppc-welt.info/community/showthread.php?t=113273

[saminegm]

Soll ich Dir ein Vodafone Rom bauen?

Other Postings: http://forum.xda-developers.com/showthread.php?t=238945

http://www.ppc-welt.info/community/showthread.php?t=113273

Would be nice! Many people want to have it. I am tryin' to build one myself now and was able to flash it (although: flashing a Vodafone ROM on a device with a Vodafone ROM has no effect).

Das wäre nett. Viele suchen das. Ich versuche gerade selber eins zu bauen und war auch in der Lage das zu flashen (aber: auf dem Gerät änderte sich natürlich nichts, war ja auch vorher ein Vodafone Gerät).

Ich will das jetz auch lernen... brauche ich nun Part00 und Part01 RAW oder nicht? Und ist der weg von dem Dump.bin mit grab it zum ROM der gleiche wie bei Paul beschrieben?

[atropo]

Great ervius, fisrst at all thank you.
Only a little question:
if j use your tools with lasagna 2.05 when j run buildos j have an error about default rgu and hv and so if j decompile the rom, j don't change anything and then j recompile the rom j haven't the same nth.
Can you tell me something about rgu and hv creation error?
Thanks.
Bye

[udK]

Great ervius, fisrst at all thank you.
Only a little question:
if j use your tools with lasagna 2.05 when j run buildos j have an error about default rgu and hv and so if j decompile the rom, j don't change anything and then j recompile the rom j haven't the same nth.
Can you tell me something about rgu and hv creation error?
Thanks.
Bye

Save *.rgu in Unicode and at the end of file leave an empty line ;)

[atropo]

Thank udk but j don't change anything.
J put os.nb to xip extract folder and then j copy xip folder rom folder of bepe tool. Where do j put .rgu and .hv files?.
Thanks.

[ervius]

Thank udk but j don't change anything.
J put os.nb to xip extract folder and then j copy xip folder rom folder of bepe tool. Where do j put .rgu and .hv files?.
Thanks.

rgu files are inside the oem and sys folder\subfolders, .hv will be created automatically by bepe kichen!! ;)

if there are some files missed (3 in lasagna 2.05)
put them in \oem\oemapps\ folder!!!
and search .hv files in all the rom, if you find them, then delete...

bye!!

[ervius]

guys, I added lesson 3

howto:
create a new package (or edit one from other rom to use it in yours!!! ;) )

first you can start with easy packages, like "regedit.cab" or "reset.cab"

P.S.: if th bepe kichen shows an error during the kook operation, it will be becouse there is another file (duplicate file) yet present in rom, delete it from other subfolder, not in the package just inserted...
good works!!! ;)
bye!

P.S.: and when you are master to create and translate your packages, I would like that all us share our new packages in other 3d, what do you think about??? ;)
bye!

[cicciocant]

Hi.

1) When I run createROM.bat it doesn't found boot.rgu and boot.hv:


........
Processing "xls2pxl.dll" as file
Processing "xmeevtsnd.dll" as module
Processing "ZipView.exe" as file
Processing "zlib.dll" as module
Processing "zoom.bmp" as file
Total Sectors: 0x11000
ImgfsToNb 2.0 RC 2

Done!
NBMerge 2.0 RC 2
Checking os-new.nb for bad NAND block marker
Checked 0x14100 sectors successfully!
Done.
Impossibile trovare C:\Documents and Settings\Massi\Desktop\PROVE VARIE\lasagna
205\hervius\bepe_kichen_trinity_ita\temp\boot.hv
Impossibile trovare C:\Documents and Settings\Massi\Desktop\PROVE VARIE\lasagna
205\hervius\bepe_kichen_trinity_ita\temp\boot.rgu
Premere un tasto per continuare . . .

It's important?

2) At the end the new-os.nb is 41.730 Kb
The windows.nb is 55.640 kb
Why?

3)In the sys folder I found this folders:
xbackup
xbatteygauge
xbatterystatus
xBT_FTB
xBT_remote_sim_SAP_2_02_update0925


Can I delete it?

[ervius]

Hi.

1) When I run createROM.bat it doesn't found boot.rgu and boot.hv:


........
Processing "xls2pxl.dll" as file
Processing "xmeevtsnd.dll" as module
Processing "ZipView.exe" as file
Processing "zlib.dll" as module
Processing "zoom.bmp" as file
Total Sectors: 0x11000
ImgfsToNb 2.0 RC 2

Done!
NBMerge 2.0 RC 2
Checking os-new.nb for bad NAND block marker
Checked 0x14100 sectors successfully!
Done.
Impossibile trovare C:\Documents and Settings\Massi\Desktop\PROVE VARIE\lasagna
205\hervius\bepe_kichen_trinity_ita\temp\boot.hv
Impossibile trovare C:\Documents and Settings\Massi\Desktop\PROVE VARIE\lasagna
205\hervius\bepe_kichen_trinity_ita\temp\boot.rgu
Premere un tasto per continuare . . .

It's important?

2) At the end the new-os.nb is 41.730 Kb
The windows.nb is 55.640 kb
Why?

3)In the sys folder I found this folders:
xbackup
xbatteygauge
xbatterystatus
xBT_FTB
xBT_remote_sim_SAP_2_02_update0925


Can I delete it?

no, not is a problem , if you try to rerun buildos.exe, you find in \temp\ directory also boot.rgu and boot.hv...
when you run createrom.bat, they will be deleted by the bat file (try to edit file:createrom.bat!! :))
so if you rerun again createrom.bat, it give you error files not found, but only becouse it try to delete boot.rgu and boot.hv, that it deleted yet previously!! ;)
ok???
bye!!!
edit:
lasagna 2.05 has an error in a rgu in \sys\phone!!!
th 2 list of ecall are formatted wrong...
cut them and replace the 2 keys with theese...


[HKEY_LOCAL_MACHINE\Security\ECallWithSIM]
"List"=multi_sz: "113",
"112",
"115",
"118"
[HKEY_LOCAL_MACHINE\Security\ECallWithoutSIM]
"List"=multi_sz: "113",
"112",
"115",
"118"



save the rgu... (attention, is ready only!!)
and restart buildos.exe!! ;)
bye!

[ervius]

Hi, I just added also all you need about extended_rom,in 1st post!!
how to build and use them..
bye!

[claros]

Hi, I just added also all you need about extended_rom,in 1st post!!
how to build and use them..
bye!
Lets talk here about tools and procedure, but after all this work you should copy your first post in the wiki. Trinity is almost the only device without kitchen instruction..
Ciao

[ervius]

Lets talk here about tools and procedure, but after all this work you should copy your first post in the wiki. Trinity is almost the only device without kitchen instruction..
Ciao

with pleasure, but I not have idea how to do that!!

[claros]

with pleasure, but I not have idea how to do that!!
It's a pleasure to explain!

Just go to to the wiki http://wiki.xda-developers.com/index.php?pagename=HTC_Trinity

Click on the question mark on the left and start to edit the page:
Bepe ROM kitchen for trinity

If you feel tired formatting the text, just past it on the wiki, you can modify it later or we can help you to do it.

If you don't like the title you can change it, click on edit on the botton left button of the page.

Don't forget to post a link on this thread too, to discuss about procedures and more information...

Ciao

[ervius]

It's a pleasure to explain!

Just go to to the wiki http://wiki.xda-developers.com/index.php?pagename=HTC_Trinity

Click on the question mark on the left and start to edit the page:
Bepe ROM kitchen for trinity

If you feel tired formatting the text, just past it on the wiki, you can modify it later or we can help you to do it.

If you don't like the title you can change it, click on edit on the botton left button of the page.

Don't forget to post a link on this thread too, to discuss about procedures and more information...

Ciao


ok....... all done on wiki!!!!
thanks!!
see if you like it!! ;)

[ervius]

Hi, I have improved and bugs solved in my apps...
packages creator
updated version from here:

(new version... bugs solved... option improved!!!)

[morf3o]

Hi, I have improved and bugs solved in my apps...
packages creator
updated version from here:
http://rapidshare.com/files/46693915/packages_creator.rar
(new version... bugs solved... option improved!!!)

The file download don't work....

This file has been deleted.
Reason: Deleted by Uploader.

Can you check, please?

Hi..... morf3o.

[ervius]

The file download don't work....

This file has been deleted.
Reason: Deleted by Uploader.

Can you check, please?

Hi..... morf3o.

try this...

[claros]

ok....... all done on wiki!!!!
thanks!!
see if you like it!! ;)
I do sir!

Ciao

[cicciocant]

One question.
In the log file of Buildos I'found some line like this:

package "Redist_Lang_0410_DPI_96" does not contain .rgu file "5426ac2d-ae8e-462f-bab8-9e8262f8e691.rgu"
package "WindowsLive_DPI_96" does not contain .rgu file "724ad92d-adb6-4229-b4f7-89b30e7c90e2.rgu"
package "Fwupdate_Lang_0410" does not contain .rgu file "141bf632-56d3-4f0b-a808-c2fd1f40065d.rgu"
package "MediaOS_Lang_0410" does not contain .rgu file "71da3033-fae4-442a-9fc6-8182fd7b974f.rgu"
package "WindowsLive_Lang_0410" does not contain .rgu file "6949fb3f-d582-4e5d-9d11-15f960afc045.rgu"

What it means?

There is a problem?

[JTMastiff]

great work ervius, almost everything is covered here.
You may consider to insert yours tool for changing Pagefile ;) .

Just one concern about MUI transaltion.
I used both reshack and restorator, but if i change the string, dialogs, icons, or anything else inside the mui, when i put them on the device it deoesnt work (EX: HTC HOME doesent show anything only it's space is used in the today screen).
I have to resign the files to let it work and even by doing this sometimes they still doesen't work.

Next step it's a full Kitchen like we have on other devices ( i mean Bebe's tools + OS + OEM so even the less talented can build theyr own rom), i could release it but 100% of the OEM MUI translated in ITA aren't made by me (for the problem described above).

[ervius]

great work ervius, almost everything is covered here.
You may consider to insert yours tool for changing Pagefile ;) .

Just one concern about MUI transaltion.
I used both reshack and restorator, but if i change the string, dialogs, icons, or anything else inside the mui, when i put them on the device it deoesnt work (EX: HTC HOME doesent show anything only it's space is used in the today screen).
I have to resign the files to let it work and even by doing this sometimes they still doesen't work.

Next step it's a full Kitchen like we have on other devices ( i mean Bebe's tools + OS + OEM so even the less talented can build theyr own rom), i could release it but 100% of the OEM MUI translated in ITA aren't made by me (for the problem described above).

for mui:
if you have traslated them, you have also to rename: exaple, if therer is amui xxx_409.mui, in english of couse, and you stranslated it into italian, you hace also to rename it by xxx_409.mui to xxx_410.mui!!!
and for italians mui you can use the ones from tynh wm6 Italian rom!!! ;)
bye!

[ervius]

One question.
In the log file of Buildos I'found some line like this:

package "Redist_Lang_0410_DPI_96" does not contain .rgu file "5426ac2d-ae8e-462f-bab8-9e8262f8e691.rgu"
package "WindowsLive_DPI_96" does not contain .rgu file "724ad92d-adb6-4229-b4f7-89b30e7c90e2.rgu"
package "Fwupdate_Lang_0410" does not contain .rgu file "141bf632-56d3-4f0b-a808-c2fd1f40065d.rgu"
package "MediaOS_Lang_0410" does not contain .rgu file "71da3033-fae4-442a-9fc6-8182fd7b974f.rgu"
package "WindowsLive_Lang_0410" does not contain .rgu file "6949fb3f-d582-4e5d-9d11-15f960afc045.rgu"

What it means?

There is a problem?
is not a problem, only that are less some registry files, but if bepe kichen shows finally "done", in status bar, at bottom-left corner, all it's ok!! :)
P.S.: .dsm files are necessary for each package (each folder woth inside system or added programs), but .rgu files are optionals...!!!
bye!

[ervius]

added in 1st post some packages ready to use in your/our kichen!! ;)

bye!!!

[JTMastiff]

downloading wm6 for hermes now, thanks for pointing me there ervius, i was away for some days and i missed it.

I'll let know when it's ported to trinity.
After that i'll start working on the kitchen.

[ervius]

in 1st post version 2 of package creator (the last created .dsm files in unicode mode, wrong, it must be created in ascii mode. solved in version2 of my packages creator!! sorry for inconveniences!!! :p )

[cicciocant]

I tried to decompile and compile the lasagna ROM and it work perfectly. Great Job.

I only have to delete the last line (Tom) to max.txt in build package folder.

Great.

Now i Want to add some packages and change some cosmetics.

[ervius]

I tried to decompile and compile the lasagna ROM and it work perfectly. Great Job.

I only have to delete the last line (Tom) to max.txt in build package folder.

Great.

Now i Want to add some packages and change some cosmetics.

yeahhh!! great ;)
I posted also some packages in 1st post!!! ;)
bye!

[cicciocant]

I believe.

I also have to delete the five folders tath are in sys folder

[CWKJ]

Looks like now, the Trinity Community is spoiled with so many choices

See here,
http://forum.xda-developers.com/showthread.php?t=320338

and

http://forum.xda-developers.com/showthread.php?t=316940

[ervius]

Looks like now, the Trinity Community is spoiled with so many choices

See here,
http://forum.xda-developers.com/showthread.php?t=320338

and

http://forum.xda-developers.com/showthread.php?t=316940

yes, there are many choices, but the real way is bepe kichen and bepe package tools...

whit other methods, is impossible to share packages, when I made a package, everyone can insert it into the rom... ;)

[bennec83]

yes, there are many choices, but the real way is bepe kichen and bepe package tools...

whit other methods, is impossible to share packages, when I made a package, everyone can insert it into the rom... ;)

Anyone can use an OEM package!!! thats the idea, and just a heads up your "package creator" doesnt generate initflashfiles properly.:rolleyes:

Obviously the one labled "Original" is what it should be (generated with mine), and the one labeled "generated" is the one that your "package creator" generated

they are totally different, and yours is incorrect!! just a heads up.

Good thread, nice kitchen too, id try it if i had a trinity but i dont!!

I still stand by manual cooking if you actually wana learn tho!!

[qwertyj]

Anyone can use an OEM package!!! thats the idea, and just a heads up your "package creator" doesnt generate initflashfiles properly.:rolleyes:

Obviously the one labled "Original" is what it should be (generated with mine), and the one labeled "generated" is the one that your "package creator" generated

they are totally different, and yours is incorrect!! just a heads up.

Good thread, nice kitchen too, id try it if i had a trinity but i dont!!

I still stand by manual cooking if you actually wana learn tho!!

Can I just ask, while this kitchen is good for fast generating ROMs, i really want to leant the in's and outs, what do you mean by manual cooking?

(i havw only just joined today so sorry if is stupid question)

[ervius]

Anyone can use an OEM package!!! thats the idea, and just a heads up your "package creator" doesnt generate initflashfiles properly.:rolleyes:

Obviously the one labled "Original" is what it should be (generated with mine), and the one labeled "generated" is the one that your "package creator" generated

they are totally different, and yours is incorrect!! just a heads up.

Good thread, nice kitchen too, id try it if i had a trinity but i dont!!

I still stand by manual cooking if you actually wana learn tho!!

why you wrote this, did you try my apps??
the vesion 2 obviosly!!
I created 5 pakages with it, and all works well, if you want only tell about, without Tried it.....
and a question, why, when I dump and then divide it, by package tools of bepe, an orignal dopod or Htc rom, I have the 2 directory (oem and sys), without no missing files??
it maybe means that bepe discovered the real way to dump, modify and recompile roms....
ok, but everyone has his ideas, and a brain to choose, but, I repeat, the one way is bepe's tools!
bye!

[bennec83]

why you wrote this, did you try my apps??
the vesion 2 obviosly!!
I created 5 pakages with it, and all works well, if you want only tell about, without Tried it.....
and a question, why, when I dump and then divide it, by package tools of bepe, an orignal dopod or Htc rom, I have the 2 directory (oem and sys), without no missing files??
it maybe means that bepe discovered the real way to dump, modify and recompile roms....
ok, but everyone has his ideas, and a brain to choose, but, I repeat, the one way is bepe's tools!
bye!

yeah of course i tryed how do you think i generated one set of initflashfiles with your "styling" in the output?

i think it is funny that i have generated a BAD set of initflashfiles with your generator and instrad of taking it as the heads up or looking into it, you moan on about bepe and how great he is, noone said he wasnt.

we all know how good he is, tis y he has stickies.

it is funny how you people take a complament:

[ervius]

yeah of course i tryed how do you think i generated one set of initflashfiles with your "styling" in the output?

i think it is funny that i have generated a BAD set of initflashfiles with your generator and instrad of taking it as the heads up or looking into it, you moan on about bepe and how great he is, noone said he wasnt.

we all know how good he is, tis y he has stickies.

it is funny how you people take a complament:


for me you dronk a lot today, I only sayd that my utils works well..
I tryed it before post...
and please, if you have some against me, please, write in private!! ok??
for me we can stop here the discussion (what discussion then??? I don't know...)
have a good day... bye!

[JTMastiff]

Anyone can use an OEM package!!! thats the idea, and just a heads up your "package creator" doesnt generate initflashfiles properly.:rolleyes:

Obviously the one labled "Original" is what it should be (generated with mine), and the one labeled "generated" is the one that your "package creator" generated

they are totally different, and yours is incorrect!! just a heads up.

Good thread, nice kitchen too, id try it if i had a trinity but i dont!!

I still stand by manual cooking if you actually wana learn tho!!

i suppose you should recheck that file, cause at my eyes the syntax seem correct.
That software generates initflashfile for italian (ITA) language, that's why there's Programmi instead of Programs, so no errors there.
Cheers :p

[bennec83]

i suppose you should recheck that file, cause at my eyes the syntax seem correct.
That software generates initflashfile for italian (ITA) language, that's why there's Programmi instead of Programs, so no errors there.
Cheers :p

look at the content of the files, the one labeled original has alot more entries

[meschle]

yeah of course i tryed how do you think i generated one set of initflashfiles with your "styling" in the output?

i think it is funny that i have generated a BAD set of initflashfiles with your generator and instrad of taking it as the heads up or looking into it, you moan on about bepe and how great he is, noone said he wasnt.

we all know how good he is, tis y he has stickies.

it is funny how you people take a complament:

***** ***** **** text edited


Dont get so personal bennec - there is no need, get back to the technical issues of your kitchen/cooking etc...

[ervius]

for right sintax also in ENGLISH, my last version of packages creator v3!!!
with more options now and in bilingual ITA/ENG!!!
here:


and in 1st post!!
bye!!!

[ervius]

look at the content of the files, the one labeled original has alot more entries

the entries of your initflashfiles, has a lot of entryes, becouse have to insert a lot of "shortcuts"???
(create a directory named "\fr\")
create a directory named "\shortcuts\)
the initflashfiles.txt generated by my program has one entryes, becouse usually there is 1 executable in each package, and only for it we need a shortcut on "programs" or "startup" or "games"

your work is differen from bepe's, so its useless that you come here to teach me how I have to create the initflashfiles.txt for each package!!!

repeate, I tested it and works fine, and if you want, you can use also it, now it "speaks" english too, and put shortcust insteadof "programmi" in "programs" for english users!

[stesa]

hi Ervius and thanks for your great work !!

my question: for those like me that dont undersdant english language is there a place where find an italian tranlation of your great work ? thx again

[ervius]

hi Ervius and thanks for your great work !!

my question: for those like me that dont undersdant english language is there a place where find an italian tranlation of your great work ? thx again

maybe in next release when you choice "ITA", all strings will be in italian!!! ok???

edited, you are telling about all tutorial...
I don't know if I'll have time to translate all it... sorry... but if someone wants, I' ll edit the 1st post and also the wiki page..(http://wiki.xda-developers.com/index.php?pagename=Bepe_Rom_Kitchen)

[stesa]

yes :P the tutorial is the first problem , thx

[ervius]

yes :P the tutorial is the first problem , thx

yes, I know... but I tired, also becouse my app. need a lot of time to became perfect, and I upload it again...
there were a problem creating "option.xml" of package, it didn't give right "dsm code!! solved in verion 3.1
sorry...
download at 1st post!!
or here:
http://rapidshare.com/files/46985556/packages_creator_v_3.1.rar
bye!

[claros]

yes :P the tutorial is the first problem , thx

ITA
Stesa,
ervius sta facendo un lavoro encomiabiale già prepaprando un tutorial in inglese, chiedergli di ripere lo stesso lavoro in italiano mi sembra un pò troppo.
Tutto sommato il traduttore di altavista o di google ti possono certamente aiutare e se rimane qualche passaggio che non ti è chiaro puoi chiedere qui.

ENG
Stesa,
ervius is doing a great job preparing a tutorial in English, asking to translate his job into Italian is probably too much. More or less altavista or google translator can help you, and if something is still unclear you can ask here.

Ciao

[udK]

I'm working to translate all in italian ;)

[stesa]

ITA
Stesa,
ervius sta facendo un lavoro encomiabiale già prepaprando un tutorial in inglese, chiedergli di ripere lo stesso lavoro in italiano mi sembra un pò troppo.
Tutto sommato il traduttore di altavista o di google ti possono certamente aiutare e se rimane qualche passaggio che non ti è chiaro puoi chiedere qui.

ENG
Stesa,
ervius is doing a great job preparing a tutorial in English, asking to translate his job into Italian is probably too much. More or less altavista or google translator can help you, and if something is still unclear you can ask here.

Ciao


you are right , but my was a prayer, not a order :D


@udk : you know that I love you :)

[ilmanu]

hi, how to add folders into ext_rom? i can only add files....

[JTMastiff]

I used some files from HERMES WM6ROM (base is still DOPOD WM6 SEA) and started preparing the kitchen as promised.
Here is the Packages Tool result txt (MUI set to Italian and no missing files, all translated to ITA with ITA skinned keyboard layout):

[Selected Path]
G:\WM6 Kitchen\jt_trinity_wm6_kitchen_1.0\JT_TRINITY_WM6_ KITCHEN_1.0\temp\dump

[Core OS]
Windows Mobile-based Pocket PCs

[Versions]
SYS: 5.2.17740.200
SYS: 5.2.17936.300
SYS: 5.2.17944.301
OEM: 9.6.0.707
OEM: 9.4.0.707
NET: 2.0.7045.0
OEM: 9.3.1.707
OEM: 9.2.1.707

[Language]
0410 - Italian (Italy)

[DPI]
96

[Certificates]
CN=Microsoft Windows Mobile PCA, O=Microsoft Corporation, L=Redmond, S=Washington, C=US
CN=OEM Sign 2005
CN=OEM_UpdateCert
CN=DOPOD001

[Missing Manifests]
d92a4f0a-378a-4482-8fd3-bd127a05e4de.dsm
723fb954-d931-4348-b672-82a188e587b5.dsm
6e35ffdb-9349-a54f-647f-3354ebf6be05.dsm


And some screenshoots:

http://img165.imageshack.us/img165/60/screenshootstl3.png

I'll upload The full files of the Kitchen (SYS and OEM folder + tools) when everything is tested and when i make the OS as lite as possible (removing OEM apps and put them on packages), in the meantime here are some of the OEM packages used:

http://rapidshare.com/files/47094583/Packages2.rar.html

Packeages in the rar are:
Commanager 10 Butoon Touch Style ITA (black skin)
Commanager OEM (10 button) ITA
Some Registry Tweaks (filesystem cache, filesystem filter cache, Font Cache, Disconnect Button and Timer 4 GPRS)
HTC Audio Manager 1_2_515718_v ITA (classic Black skin)
HTC Home Plugin Kaiser Tabs ITA (6 tab with tabsetting and Profile disabled by default, icon changed)
xHTC X Button 1.5.29198.1 ITA (used this version because commanager can be closed with this x-button version)
Network Wizard Kaiser ITA (From Kaiser OEM, almost the same as ervius one posted, only 2 registry key are different, i have thake the registry value from Kaiser rgu files.)
PHM Registry Editor (a nice reg editor)
Total Commander 2 ITA (File explorer)
Cyberon Voice speed Dial ITA
Cyberon Voice Commander ITA (taken from an eten x500 ITA)

[ervius]

I used some files from HERMES WM6ROM (base is still DOPOD WM6 SEA) and started preparing the kitchen as promised.
Here is the Packages Tool result txt (MUI set to Italian and no missing files, all translated to ITA with ITA skinned keyboard layout):


http://rapidshare.com/files/47094583/Packages2.rar.html

Packeages in the rar are:
Commanager 10 Butoon Touch Style ITA (black skin)
Commanager OEM (10 button) ITA
Some Registry Tweaks (filesystem cache, filesystem filter cache, Font Cache, Disconnect Button and Timer 4 GPRS)
HTC Audio Manager 1_2_515718_v ITA (classic Black skin)
HTC Home Plugin Kaiser Tabs ITA (6 tab with tabsetting and Profile disabled by default, icon changed)
xHTC X Button 1.5.29198.1 ITA (used this version because commanager can be closed with this x-button version)
Network Wizard Kaiser ITA (From Kaiser OEM, almost the same as ervius one posted, only 2 registry key are different, i have thake the registry value from Kaiser rgu files.)
PHM Registry Editor (a nice reg editor)
Total Commander 2 ITA (File explorer)
Cyberon Voice speed Dial ITA
Cyberon Voice Commander ITA (taken from an eten x500 ITA)
wow, 1st post with some packages...
good!!! :)
I Wait for many and many packages then...
bye!!!
P.S.: ver 3.3 of "package creator" with .reg file autoimporting into RGU!! in 1st post!

[JTMastiff]

ervius, if it's not asking too much, may we see version 3.4 of your's package creator with support for subfolders in initflashfile creation? (see Voice Commander Oem intiflashfiles if nedded; the entries my be created looking at the Packages folder and relative sub-fodlers Ex. \xVoiceCommander ITA\Programmi\Cyberon\VoiceCommander\"files placed here")
Wolud cut some time in creating packages :)

[ervius]

ervius, if it's not asking too much, may we see version 3.4 of your's package creator with support for subfolders in initflashfile creation? (see Voice Commander Oem intiflashfiles if nedded; the entries my be created looking at the Packages folder and relative sub-fodlers Ex. \xVoiceCommander ITA\Programmi\Cyberon\VoiceCommander\"files placed here")
Wolud cut some time in creating packages :)

yes, I know and think about, how to do...
the broblem is how to tell him about folders...
maybe using cab analyzer insteadof wince cab manager..., it crerates original folders, see the files inside each folder, then compile initflashfiles.txt, create a name for the package and put all files into one folder (the package'a name!...)
yes, maybe this is the right way....
only a question, how cab analyzer extract registry file???
and then I can program somethink about !! ;)
bye!!

P.S.: I'm studying about cab analyzer
here:
http://rapidshare.com/files/47141349/MSCEInf.rar
and seems create "original flders\subfolders\" and this is thst I need, and also an inf file that contains also registry keys, in its way...
I have to understand how extract and reconstruct rgu from its!!! ;)
see you!!!

[JTMastiff]

yes, I know and think about, how to do...
the broblem is how to tell him about folders...
maybe using cab analyzer insteadof wince cab manager..., it crerates original folders, see the files inside each folder, then compile initflashfiles.txt, create a name for the package and put all files into one folder (the package'a name!...)
yes, maybe this is the right way....
only a question, how cab analyzer extract registry file???
and then I can program somethink about !! ;)
bye!!

WinCE cab manager is able to extract folder too, anyway with cab analizer you can extract .inf files:
[Version]
Signature = "$Chicago$"
CESignature = "$Windows CE$"
Provider = "%Provider%"

[CEStrings]
Appname = "Vibrating Dialpad"
InstallDir = "%CE1%\%Provider%\%AppName%" ; (%CE1%\JT\Vibrating Dialpad)

[SourceDisksNames]
1 = ,"Autre",,\

[SourceDisksFiles]

[DefaultInstall]
AddReg = ClesRegistre
CopyFiles =

[DestinationDirs]

[Strings]
reg_path00 = ControlPanel\Sounds\Dtmf#
reg_path01 = ControlPanel\Sounds\Dtmf*
reg_path02 = ControlPanel\Sounds\Dtmf0
reg_path03 = ControlPanel\Sounds\Dtmf1
reg_path04 = ControlPanel\Sounds\Dtmf2
reg_path05 = ControlPanel\Sounds\Dtmf3
reg_path06 = ControlPanel\Sounds\Dtmf4
reg_path07 = ControlPanel\Sounds\Dtmf5
reg_path08 = ControlPanel\Sounds\Dtmf6
reg_path09 = ControlPanel\Sounds\Dtmf7
reg_path10 = ControlPanel\Sounds\Dtmf8
reg_path11 = ControlPanel\Sounds\Dtmf9
Provider = JT

[ClesRegistre]
HKCU,%reg_path00%,Sound,0x00000000,*vibrate*
HKCU,%reg_path01%,Sound,0x00000000,*vibrate*
HKCU,%reg_path02%,Sound,0x00000000,*vibrate*
HKCU,%reg_path03%,Sound,0x00000000,*vibrate*
HKCU,%reg_path04%,Sound,0x00000000,*vibrate*
HKCU,%reg_path05%,Sound,0x00000000,*vibrate*
HKCU,%reg_path06%,Sound,0x00000000,*vibrate*
HKCU,%reg_path07%,Sound,0x00000000,*vibrate*
HKCU,%reg_path08%,Sound,0x00000000,*vibrate*
HKCU,%reg_path09%,Sound,0x00000000,*vibrate*
HKCU,%reg_path10%,Sound,0x00000000,*vibrate*
HKCU,%reg_path11%,Sound,0x00000000,*vibrate*



In bold are the regentries, from what i understand "reg_pathXXXX" it's the Registry path name "HKCU,%reg_pathXXXX%" it's the key itself

[ervius]

WinCE cab manager is able to extract folder too, anyway with cab analizer you can extract .inf files:


:p
I've seen it just now, ok, then let's go...

[ervius]

:p
I've seen it just now, ok, then let's go...

so, then wince cab manager simulate directory....

surprise!!! :)
new beta version with more and more options to create initflashfiles.txt...
flag:"simulate folder names" on wince cab manager and put reg file into package folder you choice...
example: "...\trypackage\windows\batterystatus\batterystatus .exe"
you have to put reg file into "...\trypackage\to-import.reg" ok???
and here the new beta of package creator!!!
http://rapidshare.com/files/47225753/packages_creator_3.4_b1.rar
(or in 1st post!!!)
more choice for shortcut creator and for more exes, if there!!!
bye!
P.S: JTMastiff, or someelse, try if work well!! ;)

[ervius]

all on holydays??? ;)
I need your opinion about my soft, becouse is a beta, I need to know if there are some bugs to solve yet!! :)
bye!

[LuMe96]

Hi all,

First of all I'd like to say thanks to ERVIUS for the nice tuto. As I'm writing I just finished my first ROM (just took the new ANZ ROM, went through all the steps to decompile and back to compile).

Now, I was about to add my first packages to the ROM and got 3 questions about it :

1) When should one use the OEM folder and when the SYS folder for packages? In the tuto it says to add them to OEM, however the BEBE kitchen already has some packages in the SYS folder (e.g. xBatStatus). Why aren't they in the OEM folder?

2) What is the max size of a ROM? Is there a warning if it's exceeded? I guess that I can't add an infinite number of custom packages.

3) For my first go, I tried to add SPB Mobile Shell as package. The pb is, that there are no reg entries. Rather than that, there's an .rgs file which seems to do the work. What's the best way to handle this sort of cab? Also, the extracted progs have an ._exe extension. After install of the cab they end up with .exe obviously, but I don't see at what stage they change extension. Couldn't find anything in the rgs file. Obviously, I can do that manually, but am I (or might I be) missing other modifications?

Thank's a lot for your help.

Bye.

[ervius]

Hi all,

First of all I'd like to say thanks to ERVIUS for the nice tuto. As I'm writing I just finished my first ROM (just took the new ANZ ROM, went through all the steps to decompile and back to compile).

Now, I was about to add my first packages to the ROM and got 3 questions about it :

1) When should one use the OEM folder and when the SYS folder for packages? In the tuto it says to add them to OEM, however the BEBE kitchen already has some packages in the SYS folder (e.g. xBatStatus). Why aren't they in the OEM folder?

2) What is the max size of a ROM? Is there a warning if it's exceeded? I guess that I can't add an infinite number of custom packages.

3) For my first go, I tried to add SPB Mobile Shell as package. The pb is, that there are no reg entries. Rather than that, there's an .rgs file which seems to do the work. What's the best way to handle this sort of cab? Also, the extracted progs have an ._exe extension. After install of the cab they end up with .exe obviously, but I don't see at what stage they change extension. Couldn't find anything in the rgs file. Obviously, I can do that manually, but am I (or might I be) missing other modifications?

Thank's a lot for your help.

Bye.

1) you can delete them, in sys dir,
2) the max should be 90 Mb,
3) there are many way to compile a cab file, one is this one, when it istall itself, change the names of files inside, I don't study yet this kind of cab files, but I suggest to start with less difficult cabs, or istall it into sd, pick the folder rith the installed files inside and reconstruct the package by hands, with them , and eventualli the others inside the cab that will be installed in \windows\ folder...
tell me if you finally goal!! ;)

[JTMastiff]

just tested the Package Generator 3.4, GOOD JOB ervius!!!!

I've obtained this kind of syntax:
Directory("\Programmi\"):-Directory("test")
Directory("\Programmi\test\"):-Directory("test2")


dunno if it's ok, when i done it by hand it looks like this:

Directory("Programmi"):-Directory("test")
Directory("\Programmi\test"):-Directory("test2")


The dir "Programmi" alone doesen't need \ before, even at the end of any path it's not needed.
Didn't try to flash to see if it's working.

[ervius]

just tested the Package Generator 3.4, GOOD JOB ervius!!!!

I've obtained this kind of syntax:
Directory("\Programmi\"):-Directory("test")
Directory("\Programmi\test\"):-Directory("test2")


dunno if it's ok, when i done it by hand it looks like this:

Directory("Programmi"):-Directory("test")
Directory("\Programmi\test"):-Directory("test2")


The dir "Programmi" alone doesen't need \ before, even at the end of any path it's not needed.
Didn't try to flash to see if it's working.

yeahhh!!!
also windows is "\windows"
so, it can be ok!!!!
but now I'm working on 3.5 version, include also "[INSTALLDIR]" directory, and will became "\windows\", in this version, it doesn't understand "[INSTALLDIR]" , and create a "\[INSTALLDIR]\" folder!! ;)
bye!

[ervius]

...upping...

[ervius]

...upping...

yeahhh!!!
also windows is "\windows"
so, it can be ok!!!!
but now I'm working on 3.5 version, include also "[INSTALLDIR]" directory, and will became "\windows\", in this version, it doesn't understand "[INSTALLDIR]" , and create a "\[INSTALLDIR]\" folder!! ;)
bye!
http://rapidshare.com/files/47600450/packages_creator_3.6b2.rar

Re-reupped new version beta 3.6b1!!!

also understand "root:-directory", and other!!!
bye!!!
*****************************************
* P.S.: Beta 2 solved problem on existing rgu file!!! *
*****************************************

[claros]

http://rapidshare.com/files/47531620/packages_creator_3.6b1.rar

Re-reupped new version beta 3.6b1!!!

also understand "root:-directory", and other!!!
bye!!!
*****************************************
* P.S.: Beta 2 solved problem on existing rgu file!!! *
*****************************************

This link don't work for me, but maybe a rapidshare problem on rs216.rapidshare.com

Ciao

[ervius]

This link don't work for me, but maybe a rapidshare problem on rs216.rapidshare.com

Ciao

no, it works well!!

[claros]

no, it works well!!

Tried from work and home, I'm sure it is not a problem of mine.
This is a traceroute

5 27 ms 25 ms 26 ms Gi3-0-200.rom-cor-access-1.interoute.net [84.233
.225.9]
6 37 ms 38 ms 187 ms PO8-0.mil-cal-access-1.interoute.net [212.23.42.
65]
7 36 ms 37 ms 36 ms PO5-0.mil-004-inter-1.interoute.net [212.23.42.8
6]
8 36 ms 37 ms 37 ms cogent.mix-it.net [217.29.66.14]
9 * * * Richiesta scaduta.
10 * * * Richiesta scaduta.
11 ^C

The server you are using, and only for this file, is not reachable, at least from Italy.

Ciao

[ervius]

Tried from work and home, I'm sure it is not a problem of mine.
This is a traceroute

5 27 ms 25 ms 26 ms Gi3-0-200.rom-cor-access-1.interoute.net [84.233
.225.9]
6 37 ms 38 ms 187 ms PO8-0.mil-cal-access-1.interoute.net [212.23.42.
65]
7 36 ms 37 ms 36 ms PO5-0.mil-004-inter-1.interoute.net [212.23.42.8
6]
8 36 ms 37 ms 37 ms cogent.mix-it.net [217.29.66.14]
9 * * * Richiesta scaduta.
10 * * * Richiesta scaduta.
11 ^C

The server you are using, and only for this file, is not reachable, at least from Italy.

Ciao

I download from Italy just now again, but...
P.S. Upgraded to B2!!!!

[cicciocant]

Can you tell me some utility to confront file (text and binary) and directory?

Can you add in the kitchen a guide to change pagepool size?


Thnk's in advance.

[claros]

I download from Italy just now again, but...
P.S. Upgraded to B2!!!!

Done now, but from xda....
Will try it now.

Ciao

[ervius]

Done now, but from xda....
Will try it now.

Ciao

I hope you downloaded the beta2!! ;)
are little bugs after I changed from file browse to folder browse....
but I think this beta will became the official release!! :)
bye!

[claros]

I hope you downloaded the beta2!! ;)
are little bugs after I changed from file browse to folder browse....
but I think this beta will became the official release!! :)
bye!

Yes!
It's very different from ver 2 !! Great tool, if I can understand how to work with it... :)

So, I've to extract the cab with all folders, eg \windows, \windows\app_help etc, delete all the original app.lnk I found ther run package creator, recreate the link I want and generate dsm, rgu and xml, while Package Creator delete all the extracted dirs...
If this procedure is right, the attached package should work. Can you confirm?

Another question: what to do with directory like %CE19% aka Application Data aka Dati Applicazioni? Shall I translate %CE19% ?

Ciao

[ervius]

Yes!
It's very different from ver 2 !! Great tool, if I can understand how to work with it... :)

So, I've to extract the cab with all folders, eg \windows, \windows\app_help etc, delete all the original app.lnk I found ther run package creator, recreate the link I want and generate dsm, rgu and xml, while Package Creator delete all the extracted dirs...
If this procedure is right, the attached package should work. Can you confirm?

Another question: what to do with directory like %CE19% aka Application Data aka Dati Applicazioni? Shall I translate %CE19% ?

Ciao
I must see also the cab file!!
btw seems to tell me the initflashfiles.txt that it works!!! ;)
... and...
I have just ready ver beta 3, becouse can appen that there are 2 identical files into 2 different folders and apps give error copying them... (impossible to create a file when it exist yet!!)

P.S.: I suggest to use "Wince Cab manager, I worked on it!!!
new 3.6 b3, in first post, and here:
solved registry key that contains "%ce2%" or "%installdir%", to became "windows", duplicate files copy...

now try this one...
http://rapidshare.com/files/47637525/adobe_reader_2.0_package.zip
(italian ver 2.0 with package included!)
with new version (tell if works!!)

[ervius]

Can you tell me some utility to confront file (text and binary) and directory?

Can you add in the kitchen a guide to change pagepool size?


Thnk's in advance.

1) I use "beyond compare"

2) I think is better learn first to walk, then to run--- ;)
but I'll insert it.....

[LuMe96]

Hi all,

is there something like a DeleteFile or MoveFile command for the InitFlashfiles ?

Correct my if I'm wrong, but as far as I understood, ALL files are initially in the Windows directory. After hard-reset, they are copied to their directories corresponding to the initflashfiles.

However, as far as I was able to test, they are COPIED, not moved. That means that there's still an "un-needed" copy in the Windows directory taking up space.

Is there a way/command to move files, rather then copying them (or to delete file in Windows after copying)?

Bye.

[ervius]

Hi all,

is there something like a DeleteFile or MoveFile command for the InitFlashfiles ?

Correct my if I'm wrong, but as far as I understood, ALL files are initially in the Windows directory. After hard-reset, they are copied to their directories corresponding to the initflashfiles.

However, as far as I was able to test, they are COPIED, not moved. That means that there's still an "un-needed" copy in the Windows directory taking up space.

Is there a way/command to move files, rather then copying them (or to delete file in Windows after copying)?

Bye.

I don't now, I only see theese commands, and in rom I watched, a lot of time, and move or delete, not found, if you found someting abut, tell me too!!

[LuMe96]

Hi,

Well, I've been doing some further search on the Net and apparently there are no MOVE/DELETE possibilities.

I've also had a look at an HTC Hermes with its original WM5 ROM. the "ringtones" are WMA files and are stored in "Windows/Rings". They are however also present in the Windows directory (as hidden files). As there's no need whatsoever for those files to be in the Windows directory, this makes me think that even on original ROMs they don't have the move function.

The problem is that this considerably limits interest in OEM packages, other than system files, small utilities and programs that can be installed directly in the Windows directory. As soon as you have to use the :-File("","") command, you double space for the concerned files.

I was going to add all my favorite apps as OEM packages to my ROM, but finally I'll have to go through CAB installation (or Ext. ROM) if I don't want to eat up a lot of precious space for nothing.


Bye.

[ervius]

ok, do as you like, I'm not Microsoft programmer, and if you want add apps as packages, this is the way...(or if the app start after, put all files in one directory, without subfolders, they all will be stored only in \windows\ folder, without duplicate in other ones) the package can work also with this trick, but not shurelly!! ;)
and also in official wmX releases there are some files duplicates and stored in more folders!! so... microsoft should be change something first!!
A good example is "batterystatus", you can store all cab in one directory and then build package, it works well but you cannot see the icons on today, if you build package with subfolders, then, when you build rom you can see also the batterystatus' icons on today!!!

see you!!

[LuMe96]

hi Ervius,

please don't get me wrong : I didn't complain or meant to say that it's your fault that things don't work the way I expected them to work.

Without your great tuto, I wouldn't be running my own ROM; given it's 99% standard but, hey, 1% custom. :)

I've a suggestion for your package creator :
First the pb :
As you mentioned, I packaged BatteryStatus and went into the problem of a file of BatteryStatus having the same name as one of the phone app (gprs.bmp).

The Bepe kitchen stopped the compile and in order to get it work, I had to modify the BatteryStatus Package by doing the following :
- rename "gprs.bmp" to "batstat-gprs.bmp"
- modify the initflashfiles.txt as follows :

Directory("\Windows\BatteryStatus\default\"):-File("gprs.bmp","\windows\"batstat-gprs.bmp")


The suggestion :
It would be really cool if one could specify a prefix in package creator. This prefix would then be added to all files that DO NOT remain in the Windows Directory (the files that have to remain in the Windows Dir do not have the prefix to allow checking duplicates).
Obviously for the files with a prefix added, the prefix is taken back off in the initflashfiles File("","") function to restore the original name in the dest. folder.

What do you think ?

Hear you.
Bye

[ervius]

hi Ervius,

please don't get me wrong : I didn't complain or meant to say that it's your fault that things don't work the way I expected them to work.

Without your great tuto, I wouldn't be running my own ROM; given it's 99% standard but, hey, 1% custom. :)

I've a suggestion for your package creator :
First the pb :
As you mentioned, I packaged BatteryStatus and went into the problem of a file of BatteryStatus having the same name as one of the phone app (gprs.bmp).

The Bepe kitchen stopped the compile and in order to get it work, I had to modify the BatteryStatus Package by doing the following :
- rename "gprs.bmp" to "batstat-gprs.bmp"
- modify the initflashfiles.txt as follows :

Directory("\Windows\BatteryStatus\default\"):-File("gprs.bmp","\windows\"batstat-gprs.bmp")


The suggestion :
It would be really cool if one could specify a prefix in package creator. This prefix would then be added to all files that DO NOT remain in the Windows Directory (the files that have to remain in the Windows Dir do not have the prefix to allow checking duplicates).
Obviously for the files with a prefix added, the prefix is taken back off in the initflashfiles File("","") function to restore the original name in the dest. folder.

What do you think ?

Hear you.
Bye

yes, it can be possible, but what appen when initflashfiles.dat try to overvrite original files, like system dll???
if you try, and then confirm that it work, I modify my apps!!
;)
ok???
see you!!!
edited!!!
only in other folders with original names...
yes, it will be a good trick!! ;)
ok, go on compiler then...
bye!

[ervius]

hi Ervius,

please don't get me wrong : I didn't complain or meant to say that it's your fault that things don't work the way I expected them to work.

Without your great tuto, I wouldn't be running my own ROM; given it's 99% standard but, hey, 1% custom. :)

I've a suggestion for your package creator :
First the pb :
As you mentioned, I packaged BatteryStatus and went into the problem of a file of BatteryStatus having the same name as one of the phone app (gprs.bmp).

The Bepe kitchen stopped the compile and in order to get it work, I had to modify the BatteryStatus Package by doing the following :
- rename "gprs.bmp" to "batstat-gprs.bmp"
- modify the initflashfiles.txt as follows :

Directory("\Windows\BatteryStatus\default\"):-File("gprs.bmp","\windows\"batstat-gprs.bmp")


The suggestion :
It would be really cool if one could specify a prefix in package creator. This prefix would then be added to all files that DO NOT remain in the Windows Directory (the files that have to remain in the Windows Dir do not have the prefix to allow checking duplicates).
Obviously for the files with a prefix added, the prefix is taken back off in the initflashfiles File("","") function to restore the original name in the dest. folder.

What do you think ?

Hear you.
Bye

Ok, Ithink I' ve done it, in right way, only the files that will be stored into \windows\ folder will not renamed, but if they will be stored in any other folder, it can be named with prefix package_nameplus "-" example:
package name="pippo"
filename="pluto.exe"
pluto.exe will be stored into other folder that is not "\windows\" folder, it will be renamed:
pippo-pluto.exe
and renamed again in pluto.exe when initflashesfiles.dat stores it into proper directory!! try it here or download from 1st post of 3d!! ;)
see you!!!
P.S.: thanks to LuMe96 4 this good idea!! :)

[neogin]

Helo ervius and xda-dev people,

I want to translate JPN to ENG. By doing this, I went thru so many ways including Bepe's Tools.

First, I am using Benq P51 WM5 AKU 3.5.0 ROM. I did my search and I found P51 newest ROM in WM6 JPN here at xda-developers and the info on Bepe's Tools are as follows:

[Selected Path]
C:\Documents and Settings\Administrator\Desktop\p51\tool\ImgfsTools 2rc2b\dump jpn 411

[Core OS]
Windows Mobile-based Pocket PCs

[Versions]
SYS: 5.2.17913.300
OEM: 5.2.0.300
NET: 2.0.7045.0

[Language]
0411 - Japanese (Japan)

[DPI]
96

[Certificates]
CN=Microsoft Corporation CE Image Update Test - Root
CN=Microsoft MDD Dogfood CA - MS Root
CN=Microsoft Windows Mobile PCA, O=Microsoft Corporation, L=Redmond, S=Washington, C=US
CN=VeriSign Class 3 Code Signing 2004 CA, OU=Terms of use at https://www.verisign.com/rpa (c)04, OU=VeriSign Trust Network, O="VeriSign, Inc.", C=US

[Missing Manifests]
d92a4f0a-378a-4482-8fd3-bd127a05e4de.dsm
723fb954-d931-4348-b672-82a188e587b5.dsm
686dd77a-1600-5e3a-c2e9-fad9f0a78409.dsm

I'm kinda new here about editing ROM. So, I decided to do it easy way by using its own base rom same Benq ROM but WM6 version.
I want to translate this ROM to ENG. This ROM comes with .nb0 extension. The name of this rom is P5120600.nb0. You can find it thru this forum.

My first question here would be .. How could I dump .nb0 file? I learn how to use Tadzio's Tools and I got the WM6 ENG dump from Microsoft WM6 image as 409 ENG WM6 dump folder by ImgfsTools2rc2b Tadzio's Tools.

I'm working with my friend to translate it from JPN to ENG and he used to play with ROM before. He did the P51 WM6 JPN dump for me. I don't know how to dump it but my friend gave me his dump folder for this ROM JPN 411 Dump.

Next, I did as your lesson 3 by renaming all the files, folders, anything that contains 411 change to 409 (amui xxx_409.mui) ... and I stop it here for now.

My questions are:

1. How could I dump .nb0 file? I checked Mamaich's imgfs tools from his tutorial. It seemed .. I couldn't use his Tools to dump .nb0 type but someone mentioned his Tools could do. I see only .nb allow in his tutorial as your lesson 1 here.

**Note: Finally, I got the dump for .nb0 file by using mamiach's Tools. I'm trying to do the next step. I rename the 409 (WM6 EMU ENG ROM) into 411. I replaced to folder 411 most of them. When I use Bepe's Tools open it. I got the error "package sof missing." Any advices ??? Help me plz .. I want to use WM6 also.

2. Is it possible that I use someone ROM from other devices to edit it for my Benq P51?
2.1 If yes, Could you give me advice from scratch?
2.2 I'd like to learn many ways to edit .. cooking ROM. That's why, I couldn't miss any basic steps here.

Thank you so much for all your help. I'd appreciate it.

[LuMe96]

Hi Ervius,

ok, downloaded your last beta and tested it. I does almost what I meant ;)

Before I forget, here are three little comments that don't have anything to do with the renaming :


The prog does not like [INSTALLDIR] as directory. It's quite normal that the app can't handle it, but might be nice to check and abort with an warning message.
At least when in ENG, there are two pbs with shortcut creation :

"Programs-style" shotcut is copied to "windows\startup" rather than "\windows\start menu\programs\"
"Startup-style" shortcut creates line in initflashfiles with empty "Directory" : Directory("")

If I've two files with same name, first in a directory A, second in a subdirectory B (where B is inside A), you only keep the file in the directory A and delete the one in the sub-directory B. You've both copy instructions in the initflashfiles, so everything is fine if both files are the same. In case they are different (and just happen to have the same name), this might cause big trouble.


Back to the renaming
It's a bit the same problem as the last point mentioned above. Let's say I've 2 files :

File ABC-XYZ.EXE in Windows Directory
File XYZ.EXE in Application Directory

and I call my OEM Package ABC. See where I want to get?

Renaming the file in the app dir will make it have the same name as the file in the Windows dir (which is not renamed).

I'm a bit short of suggestions myself here, but would need to find a way to do renaming without the risk to conflict with other files. Maybe completely change file name of all files that do not remain in the windows dir and use something like GUID_+autoincrement ? That would also resolve the Folder/Subfolder pb.

Bye.

[ervius]

Hi Ervius,

ok, downloaded your last beta and tested it. I does almost what I meant ;)

Before I forget, here are three little comments that don't have anything to do with the renaming :


The prog does not like [INSTALLDIR] as directory. It's quite normal that the app can't handle it, but might be nice to check and abort with an warning message.
At least when in ENG, there are two pbs with shortcut creation :

"Programs-style" shotcut is copied to "windows\startup" rather than "\windows\start menu\programs\"
"Startup-style" shortcut creates line in initflashfiles with empty "Directory" : Directory("")

If I've two files with same name, first in a directory A, second in a subdirectory B (where B is inside A), you only keep the file in the directory A and delete the one in the sub-directory B. You've both copy instructions in the initflashfiles, so everything is fine if both files are the same. In case they are different (and just happen to have the same name), this might cause big trouble.


Back to the renaming
It's a bit the same problem as the last point mentioned above. Let's say I've 2 files :

File ABC-XYZ.EXE in Windows Directory
File XYZ.EXE in Application Directory

and I call my OEM Package ABC. See where I want to get?

Renaming the file in the app dir will make it have the same name as the file in the Windows dir (which is not renamed).

I'm a bit short of suggestions myself here, but would need to find a way to do renaming without the risk to conflict with other files. Maybe completely change file name of all files that do not remain in the windows dir and use something like GUID_+autoincrement ? That would also resolve the Folder/Subfolder pb.

Bye.

1) [INSTALLDIR] is a directory that you choice during istallation with a cab, but we want integrate in rom, so in Windows, then the apps understand the [INSTALLDIR] like \windows\ folder, and for me is ok, becouse you can choice also \windows\ as [INSTALLDIR] folder;
2) little bug, string variable wrong!! solved!! ;)
3) I can do it, but pro wath??, xxx.exe in \xxx\ directory is an exe, other xxx.exe in \windows\ is other exe... I can tell my apps to store 1st xxx.exe into \xxx\ folder and 2nd one xxx.exe in \windows\ no problem!!!
wait 5 minutes!!! ;)
see you!

[ervius]

[quote]
1) [INSTALLDIR] is a directory that you choice during istallation with a cab, but we want integrate in rom, so in Windows, then the apps understand the [INSTALLDIR] like \windows\ folder, and for me is ok, becouse you can choice also \windows\ as [INSTALLDIR] folder;
2) little bug, string variable wrong!! solved!!
3) I can do it, but pro wath??, xxx.exe in \xxx\ directory is an exe, other xxx.exe in \windows\ is other exe... I can tell my apps to store 1st xxx.exe into \xxx\ folder and 2nd one xxx.exe in \windows\ no problem!!!
wait 5 minutes!!!
see you!

[neogin]

I need a bit help here ..

I'm using Benq P51 WM5 AKU 3.5.0 now. I want to have WM6 but nobody cooks Benq P51 here. There is one WM6 Benq P51 but it's in Japanese.

Purpose :::
-----------

To change Janpanese 411 WM6 ROM into English 409 ROM

What I'm doing so far :::
------------------------

Recently, I built rom by Bepe's Tools. I got OEM and SYS ready to edit RGU and Initflashes.dat files.

Questions :::
-------------

What should I do next in order to translate Japanese into English?
What kitchen should I use for a beginner?

[ervius]

What should I do next in order to translate Japanese into English?
What kitchen should I use for a beginner?

you have to translate a lot of strings into rgus files and initflashfiles.dat, and put respectively mui files into folders deletes old and place the *409* ones.

and also initflashfiles.dat must be traslate...:



and also rgu files:example:
string: "programs" must became "programmi"
string: "my pictures" must became "immagini"
etc.etc.



What kitchen should I use for a beginner?

Here we are talking about bepe kitchen, and if you don't know yet what kitchen want use, don't post that kind of question! The bepe kitchen is a real and professional way to build, kook, modify and translate trimiy roms, I don't know other way, I think they're oldier than bepe's one!
bye.

[neogin]

Sorry to ask this but I saw a post from Bepe, he is making a new kitchen.
I'm not sure that it's finished yet.

If not, I may use the previous kitchen from Bepe.
By the way, I checked his page and it seemed I couldn't download it.

http://forum.xda-developers.com/showthread.php?t=298636

I only see HERMES ROM to download. . . . No rom kitchen ...

Thank you so much for your busy time. Normally, noone would answer my questions here. I'm working hard on this one.

NOTE:::

"you have to translate a lot of strings into rgus files and initflashfiles.dat, and put respectively mui files into folders deletes old and place the *409* ones."

I pasted 409 files that I renamed to 411 (only file.mui that contains 409 --> 411 I didn't rename the folder name.) Is this way ok too??

Next, I have to do as your guideline to edit RGU and INTFLASHFILE.

correct ???

[ervius]

"you have to translate a lot of strings into rgus files and initflashfiles.dat, and put respectively mui files into folders deletes old and place the *409* ones."

I pasted 409 files that I renamed to 411 (only file.mui that contains 409 --> 411 I didn't rename the folder name.) Is this way ok too??

Next, I have to do as your guideline to edit RGU and INTFLASHFILE.

correct ???
for bepe kitchen, yes maybe he'll release a new, but this one works well...
yes, it's the same, not important the real name of folders, mui files renamed also work, only initflshfiles.dat and rgu have to be translated...
bye!

[neogin]

hehe I got it Ervius .. at first time I read thru your tutorial here.

I have to admit that it seems good and it is too hard for me to start with.

I'm practicing your file with your tutorial. I'm too new to understand. I see great power in it.

But I think it's a good package creator tool and you have done it so fast after Lume96 requested what he liked to see on the newer version of your package creator.

I'll use your tool for sure in the near future. I have to finish easy step first haha.

I need a rest .. Reading too much today and working on the Benq rom for too long. It's 5pm here. I'll work on this rom again soon tonight.

[ervius]

h
I'll use your tool for sure in the near future. I have to finish easy step first haha.

I need a rest .. Reading too much today and working on the Benq rom for too long. It's 5pm here. I'll work on this rom again soon tonight.

yes neogin, first of all i made it for my use, and I think is easy make packages with it, initially, I had to go in a site to obtain dsm and rgu codes, then in unicode create rgu, in ansi create blanc dsm, in unicode create initflashfiles.txt, search for exes to put, and where put link, manually create shurtcuts, create by hands the option.xml (in unicode)!!!
with 2 clicks my app create all for U ;)
bye!!!

and...
yes, step by step, trying, wronging, finally you 'll be able to reach the target!! ;)
see you!

[claros]

Ervius,
I don't know how to create a cab from a package.
Absolutely sure I need the package manager I don't have but...
When and if you have enough time, maybe you can talk us about it...

Ciao

PS: I've made my first rom, trinity doesn't exploded :-)

Ciao

[ervius]

Ervius,
I don't know how to create a cab from a package.
Absolutely sure I need the package manager I don't have but...
When and if you have enough time, maybe you can talk us about it...

Ciao

PS: I've made my first rom, trinity doesn't exploded :-)

Ciao

yes, when is possible, I explain also this trick!! ;)

[cicciocant]

I tried to open new lasagna 210

Afther package tool from bepe I've OEM_FLASHDRV.DLL out SYS e OEM folders.


The output of package tools is this:


[Selected Path]
C:\Documents and Settings\Massi\Desktop\PROVE VARIE\lasagna 210\nbdumper\dump

[Core OS]
Windows Mobile-based Pocket PCs

[Versions]
SYS: 5.2.17740.200
SYS: 5.2.17936.300
SYS: 5.2.17944.301
OEM: 9.6.0.707
OEM: 9.4.0.707
NET: 2.0.7045.0
OEM: 9.3.1.707
OEM: 9.2.1.707

[Language]
0410 - Italian (Italy)

[DPI]
96

[Certificates]
CN=Microsoft Windows Mobile PCA, O=Microsoft Corporation, L=Redmond, S=Washington, C=US
CN=OEM Sign 2005
CN=OEM_UpdateCert
CN=DOPOD001

[Missing Manifests]
d92a4f0a-378a-4482-8fd3-bd127a05e4de.dsm
723fb954-d931-4348-b672-82a188e587b5.dsm
6e35ffdb-9349-a54f-647f-3354ebf6be05.dsm

[Missing Files]
OEM\OEMDrivers
MODULE: OEM_FLASHDRV.DLL


I only have to copy OEM_FLASHDRV.DLL in OEM\OEMDrivers?
But it is a module not a file?

Please helpme.

[ervius]

I only have to copy OEM_FLASHDRV.DLL in OEM\OEMDrivers?
But it is a module not a file?

Please helpme.

yes, you only have to copy it into oem\oemdrivers folder, then you can recompile the rom and it work well...
this appen when we change for an exe, or mui or a dll that have also a foldrer, in some cases we have to delete the folder (oem_drivers, in this case), and replace with a dll (this case) or a mui or a exe manually becouse is a different version, or modified version, in this case we have to delete the dsm file inside the folder (oem\oemdrivers\) and replace whit a blanc other dsm with same name, so, delete dsm file, create a new txt file and rename with the same that we deleted previous, when start bepe kitchen , it provides to recreate dsm file that contains also the name of folder in witch is and the files that are in the folder, maybe in lasagna was forget to do this operation and the dll is out from proper folder!!! ;)
but not a priblem bepe tools tells you whitch file and where is missing...
ok???
bye!!!

[cicciocant]

I don't understand.

Sorry but my english is very poor.


I only have to copy the OEM_FLASHDRV.DLL in the folder or also I've to delete dsm file and recreate it with a blanc txt?

[ervius]

I don't understand.

Sorry but my english is very poor.


I only have to copy the OEM_FLASHDRV.DLL in the folder or also I've to delete dsm file and recreate it with a blanc txt?

yes, and the blanc txt diventa un dsm vuoto col nome di quello cancellato.

[cicciocant]

Ok.

Gentilissimo e velocissimo come sempre.

Thank you very much.

[neogin]

I couldn't make the dump folder back to original benq.nb0 file.

Everytime I tried, I got the weird symbols on DOS.

I use Mamaich's Imgfs

buildImgfs and make_imgfs

After I type buildImgfs, I see the program is doing something ..

Processing xxxxxxxxx
Processing xxxxxx

so on and on .. for long time.

Then I type make_imgfs and I got something like

/*[][[-/+ some symbols like this and no new files more or less on the working folder.

[JTMastiff]

yes, and the blanc txt diventa un dsm vuoto col nome di quello cancellato.

You could also HEXEDIT the .dsm file, find "OEM_FLASHDRV.DLL", delete it and then add directly the dll.
You may also add files in this way, but bebe's kitchen will do that for you ;)

ITA:
Puoi anche hexeditare il file dsm ed eliminare al suo interno "OEM_FLASHDRV.DLL", dopo aggiungi la dll già compilata.
Puoi anche aggiungere files al dsm in questo modo, solo che i tool di bepe già lo fanno per te ;)

[neogin]

Ervius and Co.,

I'm trying to pack my rom but .... I have no idea about checksum things.

My friend told me today that .. I have to do the BuildImgfs .. (I did it and it seemed that I got good result from it .. looked from the processing went thru so well)

Next, he told me to do the make_imgfs but I got errors on this step. He told me to do the checksum at this point.

I don't know the checksum step and he couldn't help me on this also. He isn't an expert.

[ervius]

Ervius and Co.,

I'm trying to pack my rom but .... I have no idea about checksum things.

My friend told me today that .. I have to do the BuildImgfs .. (I did it and it seemed that I got good result from it .. looked from the processing went thru so well)

Next, he told me to do the make_imgfs but I got errors on this step. He told me to do the checksum at this point.

I don't know the checksum step and he couldn't help me on this also. He isn't an expert.

I don't understant what is the problem for you for checksum information, you only have to use 1 exe and 1 bat file, buildos.exe and createrom.bat...
not imgfstools or BuildImgfs to use, the kitchen do all for you..., only decompile with nbtools.exe and use the kitchen, stop.
only have to follow th etute in 1st page!!!
bye!

[ervius]

Hi, I've just re-upped my software (found bug on rename file in root package directory!! ;)
it renamed files, bud didn't!!!

new beta 4.0 beta 4
downloadable in first post or here!!!

http://rapidshare.com/files/48501774/packages_creator_4.0b4.zip

you didn't see this bug?!?!?!?

ok, ok, I've seen it for U, hehe!!!
bye!!

[claros]

Hi, I've just re-upped my software (found bug on rename file in root package directory!! ;)
it renamed files, bud didn't!!!

new beta 4.0 beta 4
downloadable in first post or here!!!

http://rapidshare.com/files/48501774/packages_creator_4.0b4.zip

you didn't see this bug?!?!?!?

ok, ok, I've seen it for U, hehe!!!
bye!!

Ervius,
You are simply too fast with releases and functionality !!!

Ciao!

[ervius]

Ervius,
You are simply too fast with releases and functionality !!!

Ciao!

yes, but there are allways some little bugs to resolve, btw, I tink that now I've posted 1st good and, hope, bug free!! ;) release!!!
version 4.1 downloadable in 1st post or here:
http://rapidshare.com/files/48579513/packages_creator_4.1.zip

have a good luck!! ;)
bye!
P.S.: I'm studying bepe kitchen, and found some interesting things!!................................ ;)

[cicciocant]

yes, but there are allways some little bugs to resolve, btw, I tink that now I've posted 1st good and, hope, bug free!! ;) release!!!
version 4.1 downloadable in 1st post or here:
http://rapidshare.com/files/48579513/packages_creator_4.1.zip

have a good luck!! ;)
bye!
P.S.: I'm studying bepe kitchen, and found some interesting things!!................................ ;)


Tell to us these interesting things!!

[cicciocant]

There is anyone?
Buon Ferragosto a tutti.

I've a question.

For example I would like to remove the streaming player from the dopod original ROM.

I've the OEM e SYS folder.

The exe is in OEM|OEMAPPS folder.

Howe can i understand what files I've to delete?

If I want to put this application inside antoher ROM what file I must to take?

Sorry for my bad english

ITA

Per esempio:
Voglio togliere lo streaming player dalla ROM originale DOPOD.

L'exe è dentro la Cartella OEM/OEMAPPS

Come faccio a sapere quali sono i file che debbo cancellare?

Se devo prendere questa applicazione e metterla in altra ROM come faccio a sapere qualsi sono file da prendere e da mettere nell'altra ROM?

Il file RGU è unico per tutti i file presenti in quella cartella.

HELP!!!

[ervius]

you have to know what files to remove...
1. search a cab or a package, overvrite all file from extracted cab or package to the ones insidE (usually into oemapps and oem_lang folders) the files rest marked, now delete them...
you have just deleted the program from rom ;)

2.give package from other rom, pass it with my utility "packages creator", after you have all you need inside the package, put it into \sys\ folder, use bepe's buildos.exe and now you have inserted it into dumped, createrom.bat and have .nb ready and with new package inserted, easy....
:)
bye!!!

[neogin]

Make_XIP.bat didn't do the job for me .. sad sad ..

Alright .. I'm so close to the final step.

Do you know how to do package to dump?

I couldn't use your tools from the beginning because of .nb0 file.

It allows only .nb file to extract into dump and build package to OEM and SYS.

(I tried so many .. Only Mamaich's did the job for .nb0 rom)

Next, I did it from start .. your tools .. until XIP part.

I did rename p51.nb0 to os.nb or os.nb0 .. both files didn't work at all.

I got errors like .. The program can't find the os.nb either it can't open the input file or it can't find the os.nb.

[ervius]

Make_XIP.bat didn't do the job for me .. sad sad ..

Alright .. I'm so close to the final step.

Do you know how to do package to dump?

I couldn't use your tools from the beginning because of .nb0 file.

It allows only .nb file to extract into dump and build package to OEM and SYS.

(I tried so many .. Only Mamaich's did the job for .nb0 rom)

Next, I did it from start .. your tools .. until XIP part.

I did rename p51.nb0 to os.nb or os.nb0 .. both files didn't work at all.

I got errors like .. The program can't find the os.nb either it can't open the input file or it can't find the os.nb.

Hi, this is a trinity guide, I don't know, if it works also for other device, I know that this bepe's kitchen works for "trinity" and "Hermes", other I not!!

[neogin]

sorry ervius to bother you here ..

i find a way now .. i hope it will work ..

i checked the msdn forum and i found cool stuff hehe ..

[ervius]

Hi all, from a Bennec83's Idea I released this last version that works with cab analyzer, and make packages from cab files automatically...
download it here or in 1st post!!!

P.S.: when cab analyzer open itself, only have to click on top/left button with zip-folder icon, and click "ok" on next window...
now, if htere are shortcuts into cab file, automatically you can see them into my appz!!!
try it and report for bugs!! ;)
bye!!
NEW Version!!!

setup reupped for a little bug, found by udk

[ervius]

just reupped for a little bug...

[ervius]

just reupped for a little bug...

reupped again new version:
in 1st post for download or here:
http://rapidshare.com/files/49654239/Package_creator_5.1_b1_setup.zip
(Thanks udk for 1st bug found!! ,and bennec for 2nd!!! )

[furiardy]

i still don't understand how i cook base original dopod wm6 ? any one can explain ?thx,my friend...

[neogin]

ervius .. can u give me some advices on resource hacker and your package cretor ..

i read on your tutorial .. still .. it's a bit hard for a newbie like me .. i did try to do some test tho ..

i just want to know like .. what does it do .. for mainly purpose .. i'm ready to use it ..

earlier .. i was kinda .. too newbie here .. i never used all the tools here in xda-dev ....

thanks for your support ervius .. u help me so many times here ..

[ervius]

ervius .. can u give me some advices on resource hacker and your package cretor ..

i read on your tutorial .. still .. it's a bit hard for a newbie like me .. i did try to do some test tho ..

i just want to know like .. what does it do .. for mainly purpose .. i'm ready to use it ..

earlier .. i was kinda .. too newbie here .. i never used all the tools here in xda-dev ....

thanks for your support ervius .. u help me so many times here ..

resourche hacker is a resource editor, with it you can wiev and modify all grafical parts into "exe","mui", "dll", if there are inside, and editing also strings into them , so if you have an english mui for ie., U can modify all strings inside it, and translate into italin strings, rename the mui from ***409***
to ***410***, and have ready the italin package from an English one ;)
package creator, creates all you need to insert a program into bepe kitchen, creates init....txt to increase and insert shortcuts, and create new folders, into original initflashfiles.dat, creates shortcuts, if nedded, creates rgu (with inside reg keys), and DSM files, with sighen GUID code, creates oprion.xml for insert package or not into bepe kitcken's buildos.exe, and more...
now it support cab extracting by cab analyzer, but I prefer proceed with wince cab manager, (there are some bugs to solve yet!)
ok???
bye!;)

[ervius]

i still don't understand how i cook base original dopod wm6 ? any one can explain ?thx,my friend...

only have to follow th tutorial in 1st page...
I think is not difficult....
bye!

[brain_81]

i have a problem with extrom

i create a new extrom with HTC_Extended_ROM_Editor and when i compile roms with nbhtool_trin i select this extrom

but when i flash roms on my device ext roms dont appears, i also modify the mounthidden regkey but no extrom...i tried also with htc custom...but no extrom...anyone can help me?

[ervius]

i have a problem with extrom

i create a new extrom with HTC_Extended_ROM_Editor and when i compile roms with nbhtool_trin i select this extrom

but when i flash roms on my device ext roms dont appears, i also modify the mounthidden regkey but no extrom...i tried also with htc custom...but no extrom...anyone can help me?

the roms based on orignal dopod cannot see ext_rom, if mounted with nbf of OS.nb, if you compile only ext_rom, into a nbh file and then , you flash into device with yet operative system installed, then maybe you are able to see it and files inside.

[brain_81]

the roms based on orignal dopod cannot see ext_rom, if mounted with nbf of OS.nb, if you compile only ext_rom, into a nbh file and then , you flash into device with yet operative system installed, then maybe you are able to see it and files inside.

thanks,thanks thanks work :) :)

[brain_81]

i cooked my first rom but i dont understand about free space-roms

if i add package of my prefered program in my roms then i have more free space respect i flash a clean roms then install my program after flash? i add some package in my roms but space archive degrade

then what is the vantage of install programm directly in roms? there is vantage in free space? or only vantage is a autoinstall roms after an hard reset? or what other vantage report install program in roms?

thanks and excuse my bud english
if anyone is italian and can answer me also in italian is good :D

ITA

sto cucinando la mia prima roms ma non capisco bene una cosa...se io metto i miei programmi preferiti direttamente nella roms ho un risparmio di spazio libero rispetto a installare una roms pulita e quindi installare dopo i programmi preferit? chiedo cio xke ho aggiunto alcuni programmi in roms ma noto che lo spazio libero diminuisce ugualmente, mi sembra diminuisce in quantita minore ma diminuisce

quindi quali sono i vantaggi di installare i programmi direttamente in roms? ce' un risparmio di spazio libero? oppure l'unico vantaggio e' quello di avere una roms autoistallante dopo un hardreset? oppure quali altri vantagi porta il fatto di installare i programmi direttamente in roms?

grazie se mi risponde qualche italiano scrivendo anche in italiano mi fa un favore xke il mio inglese e' povero :)

[ervius]

i cooked my first rom but i dont understand about free space-roms

if i add package of my prefered program in my roms then i have more free space respect i flash a clean roms then install my program after flash? i add some package in my roms but space archive degrade

then what is the vantage of install programm directly in roms? there is vantage in free space? or only vantage is a autoinstall roms after an hard reset? or what other vantage report install program in roms?

thanks and excuse my bud english
if anyone is italian and can answer me also in italian is good :D

ITA

sto cucinando la mia prima roms ma non capisco bene una cosa...se io metto i miei programmi preferiti direttamente nella roms ho un risparmio di spazio libero rispetto a installare una roms pulita e quindi installare dopo i programmi preferit? chiedo cio xke ho aggiunto alcuni programmi in roms ma noto che lo spazio libero diminuisce ugualmente, mi sembra diminuisce in quantita minore ma diminuisce

quindi quali sono i vantaggi di installare i programmi direttamente in roms? ce' un risparmio di spazio libero? oppure l'unico vantaggio e' quello di avere una roms autoistallante dopo un hardreset? oppure quali altri vantagi porta il fatto di installare i programmi direttamente in roms?

grazie se mi risponde qualche italiano scrivendo anche in italiano mi fa un favore xke il mio inglese e' povero :)

l'unica cosa è che na rom con i tuoi programmi inseriti, ti da la comodità di avere tutto appena istalli la rom...
lo spazio lo perdi comunque, anzi, se istalli un cab puoi decidere, magari , di istallarlo in sd, in rom, tutto o quasi viene istallato in \windows\
ma vuoi mettere al comodità???, la mia ultima rom è di 82,5 Mb, niente male, ma ho tutto quello che mi serve pronto, dopo il flash!! ;)

the one things, is the comodity, to insert all your prefer programs directly into rom, and after the flash you have all ready, but you occupy space in rom device, if you install a cab, maybe you can choice to install it into sminid, intert them itno rom, only in \windows\, but have the comodity, that after flash you have all ready, and mine last rom is about 82,5 Mb, but after flash, I have all ready!! ;)
bye!

[atropo]

Great ervius,
what happens if j use bepe pakage tools with www bepe rom?.
Take a look.
Bye.

[udK]

Great ervius,
what happens if j use bepe pakage tools with www bepe rom?.
Take a look.
Bye.

If you want you can use bepe packages tools also in a Japanese ROM :D

[atropo]

Dear udk
how are you?.
No doubt j can use with all but if j use with bepe rom, pakage tool doesn't show os type and doesn't generate a structured rom with sys and oem, Is it also for you or j have corrupted ny files?.
Ths.

[ervius]

Dear udk
how are you?.
No doubt j can use with all but if j use with bepe rom, pakage tool doesn't show os type and doesn't generate a structured rom with sys and oem, Is it also for you or j have corrupted ny files?.
Ths.

you cannot see anything, becouse bepe wants that you cannot see anything...
but if you make packages, you have the same as all other roms, 2 folder called \oem\ and \sys\, with package (s)!!!
ok??
"bepe docet!!!" ;)
bye!

[atropo]

Thank ervius.
J have oem, sys and a long list of dsm files outside these directory.
So is it correct and is safe to upgrade.
Tell me.
Bye.

[ervius]

Thank ervius.
J have oem, sys and a long list of dsm files outside these directory.
So is it correct and is safe to upgrade.
Tell me.
Bye.


I don't know, I didn't try to upgrade it with other packages, only I know that the idea for the structure of this rom is simply great!!! ;)

[atropo]

Ervius the last think.
If you extract bepe wm6rom for trinity, make dump dir and than use pkgtool to make package, what happen to you. J don't understand if you have only the two dir oem and sys like a correct logical rom like udk or you have many files out too.
Ths.

[ervius]

Ervius the last think.
If you extract bepe wm6rom for trinity, make dump dir and than use pkgtool to make package, what happen to you. J don't understand if you have only the two dir oem and sys like a correct logical rom like udk or you have many files out too.
Ths.

that you see, is that I see!!!!! ;)

[cicciocant]

I tried the new package creator but it doesn't work

What I do?

1) Installa Package creator
2) Open package creatorì
3) Open Cab file (I find HTC HOme 2.0 from Schen)
4) When open MSCEinf I press the Zip icon on the left

And now?

If i close MSCEinf I've an error.

Helpme please.

[brain_81]

package creator with some applications after i extract the file and click on exit for return to main page and create the pack i have one error
http://img175.imageshack.us/img175/6269/immagineej5.jpg
other application work fine but why the file .dsm is 0 byte for all application??


about the ext roms now i see because i flah it after flash rom but if i do an hard reset i lose ext roms..and when i restore a backup i have error "drive extrom dosent exist" and i cant restore...is possible to fix and have a permanet extrom?

ITA

usando package creator con alcune applicazioni dopo aver estratto i file premo exit per tornare alla pagina principale e li ottego un errore
http://img175.imageshack.us/img175/6269/immagineej5.jpg
solo alcune applicazioni mi danno sto errore..altre vanno bene ma perche il file .dsm e' sempre 0 byte per tutte le applicazioni?

a proposito della ext roms ora riesco a vederla pero quando faccio un hardreset perdo la extroms...e quando vado a ripristinare un backup mi da un errore "drive extrom dosent exist" e non posso ripristinare...e' possibile rendere la extrom fissa ed evitare di perderla allo hard reset?

[ervius]

I tried the new package creator but it doesn't work

What I do?

1) Installa Package creator
2) Open package creatorì
3) Open Cab file (I find HTC HOme 2.0 from Schen)
4) When open MSCEinf I press the Zip icon on the left

And now?

If i close MSCEinf I've an error.

Helpme please.

post here the cab, so I can check the tool!!!
bye!

also for brain81!!!!

[brain_81]

post here the cab, so I can check the tool!!!
bye!

also for brain81!!!!

try this, i have the error with this

http://rapidshare.com/files/50799731/PocketCM-0.9.cab.html


thanks :-)

[ervius]

try this, i have the error with this

http://rapidshare.com/files/50799731/PocketCM-0.9.cab.html


thanks :-)

try this exe, for beta testing!! ;)
overwrite the existin one in the previous installation folder
ie:"c\programmi\packages creator\"
ok???

[cicciocant]

http://www.divshare.com/download/1703793-0a8

There is the cab that give me problem.

[ervius]

http://www.divshare.com/download/1703793-0a8

There is the cab that give me problem.

try to use the beta 2 just posted, for me works well!!!
try and tell me....
bye!

[brain_81]

try this exe, for beta testing!! ;)
overwrite the existin one in the previous installation folder
ie:"c\programmi\packages creator\"
ok???

thanks ervius, now work fine!

i have 2 question....:rolleyes:

1_why the file .dsm is every 0 byte for all applications i do? i see your application pack and file .dsm dosnt 0 byte...is about 700 byte..why?

2_when i recompile roms with buildos.com the program ask me if i want add all my package to roms i have to select all my package, with your and other package don't ask nothing..why?

thanks thanks thanks..

[ervius]

thanks ervius, now work fine!

i have 2 question....:rolleyes:

1_why the file .dsm is every 0 byte for all applications i do? i see your application pack and file .dsm dosnt 0 byte...is about 700 byte..why?

2_when i recompile roms with buildos.com the program ask me if i want add all my package to roms i have to select all my package, with your and other package don't ask nothing..why?

thanks thanks thanks..

1) DSM file will be populate by bepe's buoldos.exe, so it must be 0 bytes in package, but after, if you check it into \dump\ rom, the same .dsm file was > of 0 bytes ;)
2) I don't understant that yoy say, can you make a screenshot of tht appen in buildos.exe when you start build??

[brain_81]

1) DSM file will be populate by bepe's buoldos.exe, so it must be 0 bytes in package, but after, if you check it into \dump\ rom, the same .dsm file was > of 0 bytes ;)
2) I don't understant that yoy say, can you make a screenshot of tht appen in buildos.exe when you start build??

i prepare a rapid example with only 2 package...

http://img245.imageshack.us/img245/7243/immaginexi3.jpg

when i doubleclick on buildos.exe appears immediatly this screen then i select the package and after press button for recompile

thanks

[ervius]

i prepare a rapid example with only 2 package...

http://img245.imageshack.us/img245/7243/immaginexi3.jpg

when i doubleclick on buildos.exe appears immediatly this screen then i select the package and after press button for recompile

thanks

from screenshot, I cannot see anithing abnormal, then you click on start arrow and buildos start to build you "dump" folder!!!
it is the normal use of buildos, if you don't want a package just deselect it and oress start arrow!!!
.....

[cicciocant]

try to use the beta 2 just posted, for me works well!!!
try and tell me....
bye!

When I close MSCEinf I always have the same error.

[cicciocant]

Can you explain step by step how can I use the new package creator?

[brain_81]

from screenshot, I cannot see anithing abnormal, then you click on start arrow and buildos start to build you "dump" folder!!!
it is the normal use of buildos, if you don't want a package just deselect it and oress start arrow!!!
.....

yes roms build work fine, but with some package i dont have that screen, only with package build myself...with others package build start without ask

[cicciocant]

yes roms build work fine, but with some package i dont have that screen, only with package build myself...with others package build start without ask


tHe answer is in the doc Faria WM6 ROM Kitchen.pdf

IN you package there is a option.xml file that gives the information to buildos.exe.

[brain_81]

tHe answer is in the doc Faria WM6 ROM Kitchen.pdf

IN you package there is a option.xml file that gives the information to buildos.exe.

ok thanks...i have another question..if i want upgrade one of my package without rebuild and flash the device...after i install the new version of apps i have two same apps installed? original in roms and new version in main memory? for example i hqave in roms resco 6 and i want install 6.10 if i install i have resco 6 in roms and 6.10 in main memory?

[cicciocant]

Does anyone have the package of HTC Home plungin 2.0 ITA?

[ervius]

Hey???

BuildOsX.exe was born!!!!
more options, 2 text log files to check errors, stayontop and automated build "os-new.nb" .
automatic generate new dsm (if in package yet present rgu file, with same code-name!)
automatic skipping preesisting files into \dump\ folder!!

Try it.
Only have to put in the same "buildos.exe"'s folder!!
bye!

[edited]
new version!!

[udK]

Hey???

BuildOsX.exe was born!!!!
more options, 2 text log files to check errors, stayontop and automated build "os-new.nb" .
automatic generate new dsm (if in package yet present rgu file, with same code-name!)
automatic skipping preesisting files into \dump\ folder!!

Try it.
Only have to put in the same "buildos.exe"'s folder!!
bye!

oh yeah! :eek:

[JTMastiff]

:confused: :eek: :D
Thanks Ervius! you have wasted my plan for tonight :D.
I've to try it, i'm quite confident it'll work flawlessy as usual.

[ervius]

:confused: :eek: :D
Thanks Ervius! you have wasted my plan for tonight
I've to try it, i'm quite confident it'll work flawlessy as usual.

yes, and new version, with more details to check better if an error appen!! ;)

[armando975]

:confused: HALLO I TRIED BUT WHEN I DUMPED I 'HAVE NOT ONLY SYS AND OEM FOLDERS BUT A LOT OF .MUI FOLDERS AND OTHERS FILE LIKE .PNG AND APPLICATIONS LIKE NOTEPAD ETC.... I BEPE'S PACKAGE FOLDER I COPIED OEM AND SYS ONLY BUT THE OS.NB IS SMOLLER THAN ORIGINAL AND THE PPC DONT'T START AFTER WINDOWS MOBILE LOGO !!! CAN YUO HELP ME ? THANKS

[ervius]

:confused: HALLO I TRIED BUT WHEN I DUMPED I 'HAVE NOT ONLY SYS AND OEM FOLDERS BUT A LOT OF .MUI FOLDERS AND OTHERS FILE LIKE .PNG AND APPLICATIONS LIKE NOTEPAD ETC.... I BEPE'S PACKAGE FOLDER I COPIED OEM AND SYS ONLY BUT THE OS.NB IS SMOLLER THAN ORIGINAL AND THE PPC DONT'T START AFTER WINDOWS MOBILE LOGO !!! CAN YUO HELP ME ? THANKS

if you are using a rom, that is not udk or lasagna or all roms in this forum, that are builded with a logical structure, (are U using "ing" rom??? I think yes, you are using luigi.ing Rom!!!)
it's normal, and forget to use bepe kitchen, the rom was builded with other utilities that I consider OLD, the rom don't have a locical structure, CHANGE rom!

and write in small letters, in forum is equivalent to raise the voice! don't write in block letters please!

[armando975]

Yes I Using Luigi Ing Rom !! And How Can I Merge All ? Thanks A Lot

[ervius]

Yes I Using Luigi Ing Rom !! And How Can I Merge All ? Thanks A Lot

you cannot, change rom.

[armando975]

you cannot, change rom.


excuseme but if i want make a mmine rom from luigi .ing i cant't do ? i can only modifie lasagna or similar ?

[armando975]

ok i tried with udk lite!!! when flash ppc it reboot make first and second splash screen that i have changed but than it blocked !! :-(((

[ervius]

excuseme but if i want make a mmine rom from luigi .ing i cant't do ? i can only modifie lasagna or similar ?

you can "only" do what you want, whit a rom structured logically, not builded only putting inside files and mofifying user/default.hv and initflashfiles.dat!

[vdias]

One small stupid question... on which step do we remove and add the files we want???

we just delete and add the files???

[armando975]

you can "only" do what you want, whit a rom structured logically, not builded only putting inside files and mofifying user/default.hv and initflashfiles.dat!

ok i'have downloaded udk rom in the last step i have to indicate spl ??? or i sign only os ?

[ervius]

One small stupid question... on which step do we remove and add the files we want???

we just delete and add the files???

if you are talking about bepe's kitchen, you can add files, by packages, add programs by packages, and removing packages, you can remove programs and files, if you are talking about some else, I don't know, you can try by hands, but have to modify also initflashfiles.dat, and rgu into the folder, ie: x-button is integrated into rom, in \oem\oemapps\ you can find the target exe?
you have to see if there is its name or its shortcut also in initflashfiles.dat, and have to remove the references, and see also in the rgu in that folder, to check if there are referencies for the exe that you want remove, it is by hands!! ;)

[armando975]

excuseme but i dont understend nothing in this moment....first adding or remove packages i tried to dump unpack and compile udk only changing splash screen !! when i do buildro it's all ok but he indicate in log file that 3 files are missing ... . then i created the rom i flash and it blocked after the second splashscreen !!! can you tell me something ? thanks

[vdias]

if you are talking about bepe's kitchen, you can add files, by packages, add programs by packages, and removing packages, you can remove programs and files, if you are talking about some else, I don't know, you can try by hands, but have to modify also initflashfiles.dat, and rgu into the folder, ie: x-button is integrated into rom, in \oem\oemapps\ you can find the target exe?
you have to see if there is its name or its shortcut also in initflashfiles.dat, and have to remove the references, and see also in the rgu in that folder, to check if there are referencies for the exe that you want remove, it is by hands!! ;)

Yes, im using bepe...

Using your example, how to remove taskmanager from the rom? or how to add PDAVIET keyboard to it?

I'm using the bepe os_new.nb...

[armando975]

eih ervius i'm using udk 3.0 but i want to personalize rom ..... so can you help me ? thanks..... the how to is ok but not perfectly simply .... if the ppc stoped after the second image... what can depends ? and in the last step i must indicare spl ? now i'm using only os.nb

[ervius]

eih ervius i'm using udk 3.0 but i want to personalize rom ..... so can you help me ? thanks..... the how to is ok but not perfectly simply .... if the ppc stoped after the second image... what can depends ? and in the last step i must indicare spl ? now i'm using only os.nb

I don't know, follow the tutorial in 1st page....
is a lot of time that i customize and build roms, and the ppc goes on perfectly....

[vdias]

Yes, im using bepe...

Using your example, how to remove taskmanager from the rom? or how to add PDAVIET keyboard to it?

I'm using the bepe os_new.nb...


Ok i manage by myself to remove the taskmanager... the problem now is adding and changing...

How can i change today, registry, add cabs... and so on...

[ervius]

How can i change today, registry, add cabs... and so on...

for cabs, you have first transform them into packages, and then put the package (folder with all inside!) into \sys\ folder of rom, for today and registry, you need some triks,(and then you have to find the right keys into .rgu files in oem\ or sys\ folders and modify them!) that you can find into xda-wiki, or asround in the world by gooooooogle!! ;)

[brain_81]

eih ervius i'm using udk 3.0 but i want to personalize rom ..... so can you help me ? thanks..... the how to is ok but not perfectly simply .... if the ppc stoped after the second image... what can depends ? and in the last step i must indicare spl ? now i'm using only os.nb

why use udk 3? use udk 4 is new and i think best...try to flash the roms with olipro 1.30, probably you have some badblock, i use every olipro1.30 for flash and i no indicate spl in coocked roms, and all works fine...use also mtty for hard reset

i want say if is possible to modify the registry key from roms, for example i want have a glycache of 4096, can i modify this string in roms for have that key to 4096 after a flash? another example i want the mounthid key (for ext roms) is on 0 after i flash roms (by default is on 1)

[ervius]

why use udk 3? use udk 4 is new and i think best...try to flash the roms with olipro 1.30, probably you have some badblock, i use every olipro1.30 for flash and i no indicate spl in coocked roms, and all works fine...use also mtty for hard reset

i want say if is possible to modify the registry key from roms, for example i want have a glycache of 4096, can i modify this string in roms for have that key to 4096 after a flash? another example i want the mounthid key (for ext roms) is on 0 after i flash roms (by default is on 1)

yes, by registry (.rgu) you can make all modifies you want, oly is that you have to search in what rgu is the key that you want, usually I search in \oem\ or \sys\ folder for "*.rgu" then I open them all together and fiund the string ;)
ok???

[armando975]

thanks brian whit udk 4 i resolved, now i'm tryng remove packages.... i simply remove folders ? ok i schearck in google ! :-)

[armando975]

excuseme i added some package and...it's ok but how can i remove for example htc home plugin ? where is it ?

[ervius]

excuseme i added some package and...it's ok but how can i remove for example htc home plugin ? where is it ?

if it is integrated into rom, some of files are in oem apps, some else maybe in oemdrivers and others in oemlang folder, you have to know what are files to remove, or, having the package, you can select all files from package, overwrite them in the those folders, the overwritten files are marked, so you can delete them, in this way you can clean rom by the files that assemble the package inside rom, but have to clean also rgus in those folders and initflashfiles.dat (if there are shurtcust to the deleted files!)

[jtonton]

Hi ervius,

I've started cooking my own ROM, and until now, everythink work fine...

BUT... (there is always a but...)

I'm blocked with the creation of a new package...
Into tutorial n°3, you wrote:

My apps create:
coded .dsm and rgu files…
(dsm is internal ppc file; rgu is a registry file that bepe kichen inports automatically into user.hv or default.hv…)
A .lnk file to the exe choose;
a initflashes.txt file (this file contains a part of initflashes.dat, that create directory and files into ppc folders (\windows\ and subfolders) while you are booting it for 1st time!! ;)
and finally option.xml, is a config file for bepe kichen that enable to you to choice if you want integrate that package into the rom or not, only flagging or not it on bepe kichen…


When I look at the initflashes.txt file created

;************************************************* ****************************
;initflashes.txt created with packages generator by ervius!!!
;package: xBatteryStatus1_04_203


Directory("\windows\start menu\programs"):-File("BatteryStatus.lnk","\windows\BatteryStatus.lnk")
;end of package: xBatteryStatus1_04_203
;************************************************* ****************************

I dont find any info regarding where to place the files... is this normal or did I have to manually specifie for each file of the application where she need to go ???

Thanks

[armando975]

another problem is that when you try to extract registry file he tell that the product must be registred !! how can we do ?

[jtonton]

Still me..... the stupid guy :p

Where can I find already made packages ?????

I've see on page 1 that you reserve a post for packages, but he's empty :(

There is a repositery somewhere ????


Thanks

[ervius]

Still me..... the stupid guy :p

Where can I find already made packages ?????

I've see on page 1 that you reserve a post for packages, but he's empty :(

There is a repositery somewhere ????


Thanks

download last release of package creator that works with free cab manager!!
and load .cab into it!!
for packages, yes, I'll upload some of them!!! bye!
P.S.: initflashfiles.txt will be created automatically by packages creator, inside will be write the shortcut for exe into the package!!

[armando975]

download last release of package creator that works with free cab manager!!
and load .cab into it!!
for packages, yes, I'll upload some of them!!! bye!
P.S.: initflashfiles.txt will be created automatically by packages creator, inside will be write the shortcut for exe into the package!!

ervius win ce cab manager don't export the registry ..... because is trial ... i don't now haw to write the key for pocket cm !!! others application are ok but pocket cm i can't resolve can yuo help me ? thanks

[brain_81]

ervius win ce cab manager don't export the registry ..... because is trial ... i don't now haw to write the key for pocket cm !!! others application are ok but pocket cm i can't resolve can yuo help me ? thanks

i dont understand...why you want extract pocketCM registry key?

non capisco, come mai vuoi estrarre le chiavi registro di pocketCM?

[ervius]

ervius win ce cab manager don't export the registry ..... because is trial ... i don't now haw to write the key for pocket cm !!! others application are ok but pocket cm i can't resolve can yuo help me ? thanks
maybe you are, after cab transformed into package, you can see also an .rgu file, that file contains all registry keys, here you are, only open it with notepad or similiar...
bye.

[brain_81]

maybe you are, after cab transformed into package, you can see also an .rgu file, that file contains all registry keys, here you are, only open it with notepad or similiar...
bye.

ervius but if i rename the .rgu file in .reg can i import with double tap that value in another p3600?

[ervius]

ervius but if i rename the .rgu file in .reg can i import with double tap that value in another p3600?

yes, you can, but maybe you have to save it in ansi, and not in unicode then, and depends also by the registry program that you use on other device, by double tap, I think by default the device is unable to import registry files!!

[crazyC]

Quick and marginally off topic question but:

When using package creator, it runs fine on my PC at work, but when I run it at home and select the Initflashfiles tab, the bottom half does not appear, all I can see is the top half of the initflashfiles tab, and the bottom half of the main screen.

Am running Windows XP sp2 on both, on a normal crt monitor. I have tried playing around with various display settings to no avail.

Any suggestions would be gratefully recieved.....

[neogin]

Hi again Ervius,

I can only add application by Package Creator .. correct ??

Today I just play with it for a while. It is very easy to use once you have some basic on playing with rom.

How can I delete the app that I don't want like VoiceCommand ??

[ervius]

Hi again Ervius,

I can only add application by Package Creator .. correct ??

Today I just play with it for a while. It is very easy to use once you have some basic on playing with rom.

How can I delete the app that I don't want like VoiceCommand ??

I yet explained it, btw, if there is a package, just remove it, instead, if is integrated into oemapps, you have to delete the exe, the images correlated with it, regerences inside initflashfiles.dat and .rgu file...
not very easy to do, but if you have the package too, select all files by package, go into oemapps folder, overwrite exsisting, and delete remain selected, same operation for:
oemdrivers;oemland, then see references into package initflashfiles.txt, and delete the references from initflashfiles.dat, same operation for rgu by package, with the oines into oemapps\oemdrivers!!!! "that's all folks"
bye!

[alddhie]

hi... noob here... and noob question also...
is there any single zip/rar files for all the tools i need?
rapidshare ok...

thanks

[neogin]

I yet explained it, btw, if there is a package, just remove it, instead, if is integrated into oemapps, you have to delete the exe, the images correlated with it, regerences inside initflashfiles.dat and .rgu file...
not very easy to do, but if you have the package too, select all files by package, go into oemapps folder, overwrite exsisting, and delete remain selected, same operation for:
oemdrivers;oemland, then see references into package initflashfiles.txt, and delete the references from initflashfiles.dat, same operation for rgu by package, with the oines into oemapps\oemdrivers!!!! "that's all folks"
bye!

hey .. thanks .. i got it now .. with your package creator tool .. it's awesome .. not that hard ..

i have a question .. if i want to add .exe file into rom .. do i have to create link and icon by myself ?? next, i use wince cab manager to create reg like your tutorial ?

[ervius]

hey .. thanks .. i got it now .. with your package creator tool .. it's awesome .. not that hard ..

i have a question .. if i want to add .exe file into rom .. do i have to create link and icon by myself ?? next, i use wince cab manager to create reg like your tutorial ?

just open cab file with last release of package creator, it make all for you, shrtcut, rgu and all you need and make a same named folder that is the package ready to insert into rom!! ;)
bye!

[neogin]

just open cab file with last release of package creator, it make all for you, shrtcut, rgu and all you need and make a same named folder that is the package ready to insert into rom!! ;)
bye!

when i use .cab file .. i get usable initflashfile.txt and xxx.rgu

when i try it with .exe .. i won't get any info on both file (initflashfile.txt and xx.rgu) they both empty

for the rgu i get only REGEDIT4 ahead and that's all

initflashfile i have

;************************************************* ****************************
;initflashes.txt created with packages generator by ervius!!!
;package: 1-calc


;end of package: 1-calc
;************************************************* ****************************

no list .. !!! did i do it wrong ?

and .. link file .. i can't see it under the folder that i create .. something wrong ??

[ervius]

Hi all, I'm preparing and upping the italian kitchen, with \oem\, \sys\, and \rom\ folder (big storage enabled!), and separated \Packages\ folder to put into all packages, now, separated by original rom!!
so everyone can try to build and modify and add, or remove packages from ROM!!!
the rom was gently offered by someone, I spent a lot of time to reconstruct it, but finally I done! and all files are included into \oem\ and \sys\ folders!! ;)
hehe!! :)
see U later!! ;)

[armando975]

Hi all, I'm preparing and upping the italian kitchen, with \oem\, \sys\, and \rom\ folder (big storage enabled!), and separated \Packages\ folder to put into all packages, now, separated by original rom!!
so everyone can try to build and modify and add, or remove packages from ROM!!!
the rom was gently offered by someone, I spent a lot of time to reconstruct it, but finally I done! and all files are included into \oem\ and \sys\ folders!! ;)
hehe!! :)
see U later!! ;)


:eek: wow whene yuo update all ?

[ervius]

:eek: wow whene yuo update all ?

ok, after a night, I thinked is better wait some before post all kitchen segrets, I thinked is earlyer to post it, I will wait some times.... sorry!! ;)

[armando975]

Ok ...good Work Bye

[ervius]

Ok ...good Work Bye

you have only to wait some times, when I decide that is the right moment, I post all, we have to wait!! ;)
bye!!

[armando975]

you have only to wait some times, when I decide that is the right moment, I post all, we have to wait!! ;)
bye!!

ok but exactly what you wont to post ? the manual by bepe and programs are also posted ....... i just cooked udk rom .. ????

[ervius]

ok but exactly what you wont to post ? the manual by bepe and programs are also posted ....... i just cooked udk rom .. ????

I will post the complete kitchen, with also:
oem\
sys\
rom\xip\
packages\

folders to kook, modify, (add/remove packages), immediatelly the itlian rom!! ;)
but not for now!!!
;)
bye!

[armando975]

I will post the complete kitchen, with also:
oem\
sys\
rom\xip\
packages\

folders to kook, modify, (add/remove packages), immediatelly the itlian rom!! ;)
but not for now!!!
;)
bye!

yes but from wwhat rom you started ? i think that a lot of people like me have got a rom with Oem, Sys and Xip ..... what is new in that you say ? i dont' understand ! when you make a dump of a rom and than a package..whit bepe's tool it's normal that you have those folders :confused:

[ervius]

yes but from wwhat rom you started ? i think that a lot of people like me have got a rom with Oem, Sys and Xip ..... what is new in that you say ? i dont' understand ! when you make a dump of a rom and than a package..whit bepe's tool it's normal that you have those folders :confused:

rhis was a rom recostructed, not possible before obtain oem\ and sys\!! ;)

[armando975]

rhis was a rom recostructed, not possible before obtain oem\ and sys\!! ;)

for example you started from luigi.ing 3.37 rom ? :rolleyes:

[JTMastiff]

@ armando975:
I think that'll come from a more talented cookers ;)

@Ervius:
I've tried BuildOSX, it's a little step furter over the original tools made by Bepe, i really like how the info are displayed in the build process.
I left some duplicate files too inside the DEV folder just for testing, and everithing just goes fine, as excepted.
Keep up the good work!!!

[armando975]

@ armando975:
I think that'll come from a more talented cookers ;)

@Ervius:
I've tried BuildOSX, it's a little step furter over the original tools made by Bepe, i really like how the info are displayed in the build process.
I left some duplicate files too inside the DEV folder just for testing, and everithing just goes fine, as excepted.
Keep up the good work!!!


i cooked my rom starting from udk 4.0 and from lasagna if is this that you want to say :eek:

[atropo]

Have you solved battery iusse?

God and ervius forgive us, we don't know what are we saying.

[ervius]

Hi all for now new buoldos+package_tools+rgu-editor, to open, dump, rebuild and modify .nb files!! ;)
packages are stored into \packages\ folder, while oem\ sys\ and rom\xip\ folder are located near .nb files, you can work locally, and have ever your preferred packages into hands!! ;)
try it!!

download here!!!



bye!

[atropo]

Another confirmation, you are really a "great" man.
Good night.

[claros]

Hi all for now new buoldos+package_tools+rgu-editor, to open, dump, rebuild and modify .nb files!! ;)
packages are stored into \packages\ folder, while oem\ sys\ and rom\xip\ folder are located near .nb files, you can work locally, and have ever your preferred packages into hands!! ;)
try it!!

download here!!!

http://rapidshare.com/files/54084112/Buildos_packagetools_rgu_editor.zip

bye!

Great work!
So you are going to release a new kind of universal rom!
Thank you!!

PS: You Personal OS should be good enough to be included in the builder, what is the reason to choose another one?

Ciao

[nealed]

Hi all for now new buoldos+package_tools+rgu-editor, to open, dump, rebuild and modify .nb files!! ;)
packages are stored into \packages\ folder, while oem\ sys\ and rom\xip\ folder are located near .nb files, you can work locally, and have ever your preferred packages into hands!! ;)
try it!!

download here!!!

http://rapidshare.com/files/54084112/Buildos_packagetools_rgu_editor.zip

bye!

Looks good - a couple of comments if I may:

1. The program when started has a typo in the Title "Package_Tools++Buildso"

2.Having just cooked my first ROM using bepe Kitchen and your instructions - I think the new tool looks great - but I being new to cooking couldn't quite get to grips - some bits missing. Could you write (or anyone else) a quick new cooks guide pls?

Thanks for the great work.

[armando975]

Hi all for now new buoldos+package_tools+rgu-editor, to open, dump, rebuild and modify .nb files!! ;)
packages are stored into \packages\ folder, while oem\ sys\ and rom\xip\ folder are located near .nb files, you can work locally, and have ever your preferred packages into hands!! ;)
try it!!

download here!!!

http://rapidshare.com/files/54084112/Buildos_packagetools_rgu_editor.zip

bye!


excuseme but whit those utilty i can cook also a rom like luigi.ing 3.37 ? ??
can you write a little how to ? i have used bepe's utility but here i think that is a little more difficult no ?

grande ervius con queste utiliti posso "cucinare" anche rom come quella modificata di luigi ? ma come faccio a farmi la cartella dump ? da cosa parto ? potresti scrivere una piccola guida ? ho semrpe usato le utility e la guida di bepe's ma qui è un po diverso ....

[claros]

Looks good - a couple of comments if I may:

1. The program when started has a typo in the Title "Package_Tools++Buildso"



Ervius ALWAYS translate/wrote in this way, it's a tipical issue of smart people that are thinking to something else when are doing something...


2.Having just cooked my first ROM using bepe Kitchen and your instructions - I think the new tool looks great - but I being new to cooking couldn't quite get to grips - some bits missing. Could you write (or anyone else) a quick new cooks guide pls?


According to my experience, you should integrate his guide to something more theoretical, for example read the original bepe's thread about kitchen, a search into xda about xip etc. etc.
Ervius wrote his guide as step by step instruction, maybe just a bit of theory is needed.

A small question for you, if you want to answer: why did you change your Arsenal avatar? Did you loose your faith?

Ciao

[armando975]

there is a guide for cook rom by ervius utility ? can i cook rom modified as luigi.ing ' rom ???? thanks

[claros]

excuseme but whit those utilty i can cook also a rom like luigi.ing 3.37 ? ??
can you write a little how to ? i have used bepe's utility but here i think that is a little more difficult no ?

grande ervius con queste utiliti posso "cucinare" anche rom come quella modificata di luigi ? ma come faccio a farmi la cartella dump ? da cosa parto ? potresti scrivere una piccola guida ? ho semrpe usato le utility e la guida di bepe's ma qui è un po diverso ....


there is a guide for cook rom by ervius utility ? can i cook rom modified as luigi.ing ' rom ???? thanks

To cook an ing rom just get a base rom and change the name... :)

To edit a dump folder follow bennec83 guide, or use any other kitchen that is not based upon bepe's buildos

Ciao

[armando975]

To cook an ing rom just get a base rom and change the name... :)

To edit a dump folder follow bennec83 guide, or use any other kitchen that is not based upon bepe's buildos

Ciao

no i don't understand .... i cooked udk 4.0 and lasagna but there is another rom from a user luigi.ing thet when i unpack give me alot of folders and not only oem and sys... how can i modifie these???

[claros]

no i don't understand .... i cooked udk 4.0 and lasagna but there is another rom from a user luigi.ing thet when i unpack give me alot of folders and not only oem and sys... how can i modifie these???

Eng:
It was not build with bepe's tools so it doesn't have a sys and oem folder. Follow the other sticky guide made by bennec83 to edit a rom of this type, otherwise you have to reconstruct the rom by hand.

Ita
Non è stata fatta con i tool di bepe e pertanto non ha le cartelle sys ed oem. Segui le istruzioni dell'altro post di bennec83 per editare direttamente il dump della rom, altrimenti devi ricostruirti la rom a mano

Ciao

[Guybrush]

because his ROM is BAD structured!! That ROM is not good and cannot be used directly with bepe kitchen, If you want to edit it You have to decompile his .nb with a classic nbdump after you have to add manually files directly to the dump and registry edit inside default.hv and user.hv using rgucomp... Finally when you have done it, you have to rebuild the dump... That's the way how he cooked his rom. I hope this will help you. Bye

[armando975]

Eng:
It was not build with bepe's tools so it doesn't have a sys and oem folder. Follow the other sticky guide made by bennec83 to edit a rom of this type, otherwise you have to reconstruct the rom by hand.

Ita
Non è stata fatta con i tool di bepe e pertanto non ha le cartelle sys ed oem. Segui le istruzioni dell'altro post di bennec83 per editare direttamente il dump della rom, altrimenti devi ricostruirti la rom a mano

Ciao

ENG: OHHHH OK !!! can you post the url please ? 'm not experted of forum thanks!! and what do you think ? in this moment which is the best rom ?

ITA: oh finalmente grazie mille ...sei il primo che mi ha spudoratamente chiarito la situazione !!! puoi lincarmi il post ? non sono molto pratico ..scusa
ps secondo te qual'è l arom che va meglio ? grazie

[Guybrush]

http://forum.xda-developers.com/showthread.php?t=320338

[armando975]

because his ROM is BAD structured!! That ROM is not good and cannot be used directly with bepe kitchen, If you want to edit it You have to decompile his .nb with a classic nbdump after you have to add manually files directly to the dump and registry edit inside default.hv and user.hv using rgucomp... Finally when you have done it, you have to rebuild the dump... That's the way how he cooked his rom. I hope this will help you. Bye

ok i'm using udk 4.0 i like it ... i used also lasagna .... but i have to say thet luigi.ing rom is veri veri performant....is very fast

[Guybrush]

I not agree with you but you must follow your feelings, happy you happy all ;)

[Guybrush]

To cook an ing rom just get a base rom and change the name... :)

To edit a dump folder follow bennec83 guide, or use any other kitchen that is not based upon bepe's buildos

Ciao

but.... LOL

[armando975]

http://forum.xda-developers.com/showthread.php?t=320338


thank you !!! but because this metod is different from bepe's ?

[claros]

ENG: OHHHH OK !!! can you post the url please ? 'm not experted of forum thanks!! and what do you think ? in this moment which is the best rom ?

ITA: oh finalmente grazie mille ...sei il primo che mi ha spudoratamente chiarito la situazione !!! puoi lincarmi il post ? non sono molto pratico ..scusa
ps secondo te qual'è l arom che va meglio ? grazie

As to me:
Guybrush Lasagna, Udk Lizard and Ervius Personal are a lot better than the original htc rom and the dopod wm6. You can just choose your favourite package/er and/or their graphical style.

I'm using Ervius Personal because he did an hybrid rom I was trying to made by myself but with a lot of bugs more... :(

Ciao

[Guybrush]

thank you !!! but because this metod is different from bepe's ?


It will teach you how use instruments to modify a ROM without work on his real structure... as your friend did... It's not the best way to cook a ROM.

[ervius]

ok, folk, the rom that I not posted, was the ing 3.37 reconstructed into oem\ and sys\ folders, is possible to report the rom in a logical structure, but it needs a lot of time!!!!
if you pass that rom with package_tools, you have also oem\ and sys\ folders, but a lot of files are unchaced or missed by theese folders, only have to compare with other rom, I think is better try with udk 4.0 or lasagna 2.05 (;) )
and put manually the missed files or unchecked, and after try to reconstruct \dump\ folder and again packages, until you have all files into oem\ and sys\ folder, but repeat, it needs a lot of time to completelly to structure it, I tryed, I succeded, and I have ing 3.37 in oem\ and sys\ folder, ready to post, when I think is the moment!! ;)
bye!!!

[claros]

ok, folk...
bye!!!

...
Maybe I can understand what you are doing, but:
you've made a great work and written a great cooking tool, as to me your personal os or bepe os are surely a better base rom to complete your project.

Ciao

[nealed]

According to my experience, you should integrate his guide to something more theoretical, for example read the original bepe's thread about kitchen, a search into xda about xip etc. etc.
Ervius wrote his guide as step by step instruction, maybe just a bit of theory is needed.Ciao

Yes - I came to the same conclusion, too. I need more time.;)

My plan is to write a guide for "myself" that I will then post. This is the best way for me to understand. I'm getting there...slowly

bepe's thread about kitchen - you're talking about the hermes WM6 kitchen by bepe, right?

A small question for you, if you want to answer: why did you change your Arsenal avatar? Did you loose your faith?
Ciao

No - my faith in the gunners is greater than ever. The professor has just signed a new contract - and selling TH10 was the best thing that could have happened to this team right now.

I just like toxic17 and felt that instead of constructive discussion it could be all out war as he changed his avatar to a Chelski badge:D

[armando975]

ok, folk, the rom that I not posted, was the ing 3.37 reconstructed into oem\ and sys\ folders, is possible to report the rom in a logical structure, but it needs a lot of time!!!!
if you pass that rom with package_tools, you have also oem\ and sys\ folders, but a lot of files are unchaced or missed by theese folders, only have to compare with other rom, I think is better try with udk 4.0 or lasagna 2.05 (;) )
and put manually the missed files or unchecked, and after try to reconstruct \dump\ folder and again packages, until you have all files into oem\ and sys\ folder, but repeat, it needs a lot of time to completelly to structure it, I tryed, I succeded, and I have ing 3.37 in oem\ and sys\ folder, ready to post, when I think is the moment!! ;)
bye!!!

but are you agree with me saing that luigi ing 3.37 is more performant than udk and lasagna ?

[Rayan]

Well, I think this is by far the best Kitchen and instructions ever...

Finally, no more ROM hunting... Now I have my own ROM

THANKS A LOT!!!

Cheers!
Rayan

[ervius]

but are you agree with me saing that luigi ing 3.37 is more performant than udk and lasagna ?

I only hope you are kidding... maybe, the ing rom wi l be bettere only by itself, after I recstructured into oem, and sys, but to say that is more performant.... yeahhh, you are kidding... but here we are talking about bepe kitchen and howto... if you want, you can open other 3d, for me, here stop now about rom performances.... ;)

[armando975]

ok, folk, the rom that I not posted, was the ing 3.37 reconstructed into oem\ and sys\ folders, is possible to report the rom in a logical structure, but it needs a lot of time!!!!
if you pass that rom with package_tools, you have also oem\ and sys\ folders, but a lot of files are unchaced or missed by theese folders, only have to compare with other rom, I think is better try with udk 4.0 or lasagna 2.05 (;) )
and put manually the missed files or unchecked, and after try to reconstruct \dump\ folder and again packages, until you have all files into oem\ and sys\ folder, but repeat, it needs a lot of time to completelly to structure it, I tryed, I succeded, and I have ing 3.37 in oem\ and sys\ folder, ready to post, when I think is the moment!! ;)
bye!!!

hallo ervius ... i unpacked udk 5.0 by bepe's tools but when i run package tools i have sys and oem folder but i have also default.hv initflashfile.dat packages.sof and user.hv files !!! how can i proceed ?????

[brain_81]

hallo ervius ... i unpacked udk 5.0 by bepe's tools but when i run package tools i have sys and oem folder but i have also default.hv initflashfile.dat packages.sof and user.hv files !!! how can i proceed ?????

have you see in the sys folder what appears......??
i cant to edit any roms

hai guardato cosa ti appare nella cartella sys....??
io non riesco piu a editare nessuna roms

[armando975]

have you see in the sys folder what appears......??
i cant to edit any roms

hai guardato cosa ti appare nella cartella sys....??
io non riesco piu a editare nessuna roms

si mi sa che udk ha usato altri tool per evitare di far editare la sua rom ..... possibile ? ervius che ne dici ? e tu bepe ??

yes i think that udk copiright his rom .... we can't cook udk 5.0 whit bepe's toools ????

[banzro]

Hello

I have a extracted OS Dump. In there all dll's ar extracted to subdirectorys.
How can I find out the Version of each Dll File

Roman