After bricking ?

[6600]

Hello

If device bricked is possible with recovery microsd method ;
Just put "RUU_signed.nbh" from O2 orginal image to root directory
and after Hard reset with bootloder modus ?

thx

[derooseolivier]

Hello

If device bricked is possible with recovery microsd method ;
Just put "RUU_signed.nbh" from O2 orginal image to root directory
and after Hard reset with bootloder modus ?

thx


TAKE A LOOK HERE : http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing

FROM XDA-WIKI SECTION :

" 1. Empty (erase the contents) of your microSD card from the Windows Mobile file explorer or format it from your computer using a card reader (in some cases format doesn't work).

2. Extract the .NBH file from your prefered ROM upgrade: In windows use winrar (right click) to extract the contents of the exe file. In Linux / MacOS use cabextract.

3. Rename the .NBH file to ARTEIMG.nbh and copy it to the root folder of your microSD card.
4. With microSD card inserted on the phone, start the bootloader (The bootloader is invoked by pressing down the Record button and using the stylus at the same time to press the RESET button at the left side).

5.You should see the screen pictured on the left, confirm flashing on screen by pressing the volume slider down.

6. Flashing might hang after some time but this is normal. Just wait. Complete flash takes about 30 minutes, so check your battery or connect to charger before the flashing process starts.

!!!! SuperCID devices are able to flash any NBH image using this method. "

[Patrick_UK]

I unbricked my Orbit with the original ROM from O2.
Firstly put your Orbit in Bootloader mode (reset and record button)
Then using the task manager stop ActiveSync processes.
Then connect the phone via USB and then run the RUU program.
Works fine!