View Full Version : Treo 750 WM6 Rom questions
snowdonx
1st August 2007, 02:50 AM
I have a few questions in regards to the Treo 750 WM6 rom
Will the AT&T rom work within Australia?
If no why not?
What skillsets are required to make your own rom?
I sincerely thank you for any help.
dma1965
1st August 2007, 03:37 AM
This should be in the technical discussion. No need for a new thread.
Moderator, can you delete this thread, please?
summiter
1st August 2007, 03:49 AM
Hi snowdonx, welcome to xda-dev.
I don't see why it wouldn't work in Australia - but I can't say for sure so someone else will have to give you a definitive answer there.
As far as making your own ROMs - everything you need to know can be learned here. I'd suggest reading some of the newer guides in the Hermes forum to get started.
To give you a head start - there's a couple basic things to be aware of. First, newer devices like the Hermes and Treo 750 will not allow flashing of custom ROMs, or more correctly, ROMs that aren't signed with a carrier or manufacturer certificate. The bootloader (SPL) enforces this. So the first step in getting custom ROMs on a device is putting in place a modified bootloader that allows unsinged ROMs. The number of folks who can do this is very limited compared to the number of folks who can build customer ROMs.
Creating the ROMs, in a nutshell, involves dumping an existing ROM using tools available here, making modifications, rebuilding the ROM, and flashing.
Hope you enjoy your stay here. =)
I have a few questions in regards to the Treo 750 WM6 rom
Will the AT&T rom work within Australia?
If no why not?
What skillsets are required to make your own rom?
I sincerely thank you for any help.
snowdonx
1st August 2007, 06:28 AM
Has anyone with a Treo 750 successfully used the WM6 AT&T ROM within Australia?
snowdonx
1st August 2007, 06:44 AM
Hi snowdonx, welcome to xda-dev.
I don't see why it wouldn't work in Australia - but I can't say for sure so someone else will have to give you a definitive answer there.
Why would you forsee it to work?
flashgordonv
1st August 2007, 08:31 AM
Has anyone with a Treo 750 successfully used the WM6 AT&T ROM within Australia?
Yup. Works a treat on Telstra and if you read through the thread you will see it works on Optus and Vodafone too.
amberzombie
1st August 2007, 08:36 AM
and Three too
snowdonx
1st August 2007, 08:43 AM
Does it work on the NextG network on Telstra? i'm pretty sure it should since HSDPA is included on the Treo ROM Upgrade... and how do I get the telstra software and settings onto the treo as well? Do I need to unlock the sim at all?
pleiades
1st August 2007, 11:54 AM
and Three too I second that.
summiter
1st August 2007, 06:35 PM
Why would you forsee it to work?
wow.......
irv777
14th August 2007, 09:12 AM
Hi, I'm in Aus aswell and thinking of getting an unlocked 750V from ebay......just a question about how the IMEI is changed after upgrading to the UNOFFICIAL WM6, what will happen if the OFFICIAL WM6 rom becomes available...are we able to upgrade without problems....i know this has been asked before on other threads but no one seems to know the answer......i guess those that have upgraded to the leaked roms will find out when they try to upgrade the official rom when it becomes available......
charliecharlie
14th August 2007, 11:16 PM
Just try the official WM6 ROM in the upload dir on the ftp:
uploads/Treo 750Cheetah/WM6 ROM Cheetah Treo 750v
Download the NBH, put it on an empty memory card and insert it into the Treo
Push the sidebutton (below the volume keys), the right softkey below the display and reset with the stylus (all together) and the bootloader starts and you can upgrade the treo to WM6 with HSDPA enabled.
Cheers mate!
irv777
15th August 2007, 03:37 AM
thanks, also what are the main differences between 750 and 750v models?.....apart from the word 'vodafone' stamped on the actual phone.....
ddhytz
15th August 2007, 08:42 AM
Just try the official WM6 ROM in the upload dir on the ftp:
uploads/Treo 750Cheetah/WM6 ROM Cheetah Treo 750v
Can you give a link of this ftp?
charliecharlie
15th August 2007, 02:28 PM
ftp://xda:xda@ftp.xda-developers.com
charliecharlie
15th August 2007, 02:32 PM
thanks, also what are the main differences between 750 and 750v models?.....apart from the word 'vodafone' stamped on the actual phone.....
the main difference is that the Vodafone firmware has Vodafone presets and Vodafone theme next to the standard Windows themes and settings. (Customisation for Vodafone). In the original WM5 rom, there was no messenger available. In WM6 the Live Messenger is back ! Other than that, I don't think there are other differences.
SecureGSM
15th August 2007, 03:46 PM
this ROM appears to come from Vodafone (AU)
CE OS: 5.2.1239 (Build 17746.0.2.4)
Firmware version: 1.47.02.00
so far so good...
kortez
15th August 2007, 05:10 PM
So it's almost the same, just Firmware version on AT&T is newer: 1.47.02.00 VS Firmware version: 1.47.25.00
SecureGSM
15th August 2007, 05:16 PM
yes, nothing unexpected. (баян)
kortez
15th August 2007, 05:26 PM
SecureGSM
:) Aight. Thanks for the info.
miloszz
15th August 2007, 06:55 PM
Is it very branded?
SecureGSM
15th August 2007, 07:01 PM
very lite branding there.
1. PALM TREO business home theme
2. radio on/of screen (Vodafone Logo)
That's all I can find so far.
Is it very branded?
miloszz
15th August 2007, 08:05 PM
very lite branding there.
1. PALM TREO business home theme
2. radio on/of screen (Vodafone Logo)
That's all I can find so far.
Sounds just cool (I have wm5 vodafone branded and it's almost no branded ;) )!
Any issues?
mikechadwick
15th August 2007, 09:04 PM
ftp://xda:xda@ftp.xda-developers.com
does this link actually work?
manfly9884
15th August 2007, 09:11 PM
does this link actually work?
Yes it does. Used it today myself.
irv777
16th August 2007, 01:16 AM
Hi everyone, so i finally bought a treo which is the PALM TREO 750V (unlocked)......this is an excellent phone!!!!...
Does anyone know where i can get the original firmware which is this:
WM5 5.1.195 (build 14959.2.3.2)
Software Version: TREO750-1.15-VFE
Firmware Version: 1.12.0a.00
I just want to be able to revert back to this original firmware if something goes wrong with upgrading to WM6... just in case
Thanks in advance
bnycastro
16th August 2007, 04:02 AM
1.16 is the latest for WM5. Just download the desktop updater from palm's website. Try palm HKG :)
irv777
16th August 2007, 04:08 AM
Thanks Bny
bnycastro
16th August 2007, 04:11 AM
Thanks Bny
here is the link: http://www.palm.com/hk/ie/support/downloads/treo/750vupdate.html
The Solutor
16th August 2007, 04:16 AM
Sounds just cool (I have wm5 vodafone branded and it's almost no branded ;) )!
Any issues?
No issues, but the Wm6 Voda ROM is one month older than the ATT one.
miloszz
16th August 2007, 07:25 AM
Does it make difference?
It doesn't have issues or any "new" issues comparing to AT&T. I mean incoming calls, low backlight. And what with ExtRom?
I think it's time foe me to upgrade :D
Sorry for questons - now I've found thread about this rom ;) But no word about low-light issue there...
vBulletin® v3.8.2, Copyright ©2000-2009, Jelsoft Enterprises Ltd.