g3 wizard killed (SOLVED)

[mrtkts]

hi all,

i uploaded my g3 with this rom Molski.Biz_AKU3.3_21911_8MB_Crossbow.exe. in the beginning everything is normal. it normally finished upgrading. then it restarted automatically, but my g3 didnt open. it shows always bootscreen. ipl and spl both 1.03.

i read almost all forum. when i try hard reset it says "format is ok" but nothings change.

and when i try upgrading with another roms. it gives ERROR 260 NO CONNECTION.

how can i fixed it? pls help me.

[the-equinoxe]

read the flashing tutorial..

Start in bootloader
kill activesync *(wcescomm process in taskmanager)
reflash..

BTW WM6 requires 2.X IPL/SPL !!!

[xeno1]

If you read almost all the forum, you must have missed a few pages. The reason it won't start up is because you have an IPL/SPL of 1.03. With the phone off and connected to the usb cable, press and hold the camera button and then press the power button. Don't release the camera button until you get a 3 colored screen. That's the bootloader. Now flash an official ROM such as T-Mobiles 2.26 to get your IPL/SPL to at least 2.xx (if you flash T-Mobiles ROM they will be 2.26). After you do that you can flash Molski.Biz's ROM or any other ROM of your choosing.

[mestrini]

I just want to add to all the correct things said here that sometimes "No Connection" errors come from low voltage battery. Be sure to have it fully (or almost) charged!

[mrtkts]

If you read almost all the forum, you must have missed a few pages. The reason it won't start up is because you have an IPL/SPL of 1.03. With the phone off and connected to the usb cable, press and hold the camera button and then press the power button. Don't release the camera button until you get a 3 colored screen. That's the bootloader. Now flash an official ROM such as T-Mobiles 2.26 to get your IPL/SPL to at least 2.xx (if you flash T-Mobiles ROM they will be 2.26). After you do that you can flash Molski.Biz's ROM or any other ROM of your choosing.


i did all what you said. ecxept trying the t-mobile 2.26 rom. coz i couldnt find it. i got 3 colored screen and i tried another rom and it gives sama error (260 ERROR) it is look like has no connection so rom update couldnt find ppc

[Cing 8125]

Look here for T-mobil 2.26

http://forum.xda-developers.com/showthread.php?t=310831

[mrtkts]

no it didnt work. as i said when in 3 colured screen, there is no connection between my computer and ppc. so it always gives same error: ERROR 260. it says "no connection" check usb cable etc.

by the way there is no problem with usb cable.

i think there is another method to rom update. can i copy any rom to my sd card by using ntrw.exe.

do you think it is work. if it is so, can anyone explain me details


thnx

[mrtkts]

hi forum members(people who have the best knowledge about pocket pc).

i dont know what i did but my wizard is working now. i did what i alwyas did before, i mean in serial mode i tried to update wizard, today i want to try again then it is ok.

thnx for helping....