get cid information

[imseasky]

Hi all:
how to get dopod M700's CID information? I just can bei able into bootloader mode

[mytrinity]

Hi all:
how to get dopod M700's CID information? I just can bei able into bootloader mode

I guess you want to know if your phone is CID locked?
Just try to upgrade with a complete_shipped_update_rom of the P3300 available from HTC.
If it does not give you any errors then your phone was CID unlocked.
Try at your own risk!

Regards,
mytrinity

[fdp24]

Hi all:
how to get dopod M700's CID information? I just can bei able into bootloader mode
If you want to know if your device is CID locked or not:
1. go into bootloader (RGB screen)
http://wiki.xda-developers.com/index.php?pagename=Artemis_Resets
2. disable active sync connection
3. connect USB cable and start mtty console.
4. perform set 32 command in mtty console.
in a response you will see g_cKeyCardSecurityLevel = 00 or
g_cKeyCardSecurityLevel = FF
00 - stands for unlocked
FF - locked

rem: if you use USPL (USPL is installed on your device), then set 32 command will always report g_cKeyCardSecurityLevel = 00, although on a reality device remains locked. USPL just bypass CID check.

regards,

[imseasky]

thx u!:) :) :)

[scrappydoo]

If you want to know if your device is CID locked or not:
1. go into bootloader (RGB screen)
http://wiki.xda-developers.com/index.php?pagename=Artemis_Resets
2. disable active sync connection
3. connect USB cable and start mtty console.
4. perform set 32 command in mtty console.
in a response you will see g_cKeyCardSecurityLevel = 00 or
g_cKeyCardSecurityLevel = FF
00 - stands for unlocked
FF - locked

rem: if you use USPL (USPL is installed on your device), then set 32 command will always report g_cKeyCardSecurityLevel = 00, although on a reality device remains locked. USPL just bypass CID check.

regards,
whats mtty console?? thanks

[triplejay]

<snip> it's a console app...you run it on the PC, connect via usb and it sends commands directly to the bootloader...but you can mess things up if you don't know what your typing...

[fdp24]

scrappydoo:
mtty is console, enables you to interact with device thru command interpreter implemented in SPL of the device.
it is a software.
don't be lazy next time and use search, it is designed specificaly for this..
regards,

[jewelzeem]

Cmd>

Cmd>set 32
+ SD Controller init

- SD Controller init

+StorageInit

SDInit+++
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
CMD55 failed
+ SD Controller init

- SD Controller init

+StorageInit

SDInit+++
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
CMD55 failed
g_cKeyCardSecurityLevel = FF

HTCE
how to cid unlock???

[vasilii_htc]

Hi all:
how to get dopod M700's CID information? I just can bei able into bootloader mode

for get CID information use this program

http://www.androlib.com/android.application.org-tritonsoft-cidgetter-zjCAj.aspx

or search in googleMarket CID Getter

[Hakim Rahman]

for get CID information use this program

http://www.androlib.com/android.application.org-tritonsoft-cidgetter-zjCAj.aspx

or search in googleMarket CID Getter

previously, I congratulate the new year to everyone in xdadevelopers :D:D vasilii_htc yes you are correct, but the link to get the CID that you give it to a specially-based devices android......:):) thank you for its information :D