Telus HTC P4000 No Radio FIX

[monizks]

Ok Here is how to fix the problem with a p4000 on telus when it dies and goes no radio on the htc load screen. I know the phone looks like a brick at this point but all you have todo is:

1. Kick the phone into bootloader mode. (Hold ok + Power + Camera and do a soft reset)
2. download the new wm6 Firmware (http://www.htcamerica.net/support/p4000/software-downloads.html)
3. now with the phone in bootloader mode connect the usb cable and run the firmware upgrade. (the upgrade will not see the curent software version on the phone, just click upgrade anyway)

Hope this helps

[swegene]

I have tried what you said and it did not work
I am able to flash a new room which completely load with the usb cable
and after the same message happen again which is no radio

I also tried to install a new radio that i took from this website and the phone stays on focus form a long time with the screen beeing gray or white and It stays on Loading ... For a long time and then close but do not power back on i have to remove the batteries
so could anyone help me plz
the only thing i see in bootloader mode is
TITA100
SPl:-2.07.0000
cpld-9

its the htc p4000 with telus

[drewcam888]

First did you flash the stock telus rom.
Next did you name the radio file separately on the sd. It should be TITAIMG.nbh. The sd method will work.

[swegene]

Where do i find the telus stock rom
i took the rom from the htc.com/ca website and am not sure if its what you are referring too

[azevedo37]

I have tried what you said and it did not work
I am able to flash a new room which completely load with the usb cable
and after the same message happen again which is no radio

I also tried to install a new radio that i took from this website and the phone stays on focus form a long time with the screen beeing gray or white and It stays on Loading ... For a long time and then close but do not power back on i have to remove the batteries
so could anyone help me plz
the only thing i see in bootloader mode is
TITA100
SPl:-2.07.0000
cpld-9

its the htc p4000 with telus

I have the exact same setup with the 2.07.0000 bootloader as well as "no radio" power cycle. I have been reasearching for two days now and I think I might know what the problem is, however I need some help fixing it.

The bootloader, radio and rom all have to work together. If the rom gets updated and you still have an older radio or bootloader then power cycling can occur.

Could someone please help us? I have tried flashing several radios, bootloaders and roms via sd to fix this problem but nothing is working and most the time the phone just hangs in the "loading..." screen.

Many thanks in advance!
Jon