heldeeb
07-08-2007, 12:53 AM
After the lot of trials I made with Jetware several releases, I found that this one solved it realy. It reads from phonebook not SIM contacts. It shows the name and save it as a name in the calllist, however this blocked calling from calling list on your Headset.
The example below as made by our colleague Dtread1 I just copied it from Athena accessories, is showing jus the BT 8010 and the advantage, The Jetware is giving solution almost for all. The BT 8010 was not on the list of devices but using the NOkia one worked fine.
Jabra BT 8010 - Solution to display Caller ID
--------------------------------------------------------------------------------
As the first instructions caused some confusion, and some people couldn’t get Jabra to show caller ID, hear are them more complete.
Don’t forget that caller ID only “works” if the caller is in your contact list in the HTC X7500.
A problem still remains: Dialling from Call List in BT8010 doesn’t work
1 – Delete the paring between HTC X7500 and Jabra (if you have one).
2 - Upgrade the Jabra to V1.33 . (http://uswww03.gnnetcom.com/Myjabra/... enter_na.html)
3 – Install Jetware V1.30 on your HTC X7500 (http://www.jetwaremobile.com/)
4 – Soft reset Your HTC X7500
5 – On your HTC X7500, go to -> Start -> Programs -> Bluetooth Options -> Hands-Free Config ->
Menu -> Advanced options -> Ok. Here, at least, you must select /check this options:
.Phonebooks
.Messaging
.Caller ID
.Query status indicator
.Update status indicators
.Hang up/swap to incoming call
6 – Establish a new paring.
7 – On your Jabra settings select -> Display -> Caller ID and select -> ON
8 - From your Advantage (connected to ActiveSync or GPRS) go to this link (http://www.jetwaremobile.com/bthfx/D...kia_HS-12W.jcf.)
9 - When you download that file you should get a prompt asking which paired Bluetooth device the settings should apply to
Choose -> Jabra and -> Done.
10 – Soft reset your HTC X7500.
11 – Turn off your Jabra.
12 - Turn on your Jabra
Regards
__________________
AM
The example below as made by our colleague Dtread1 I just copied it from Athena accessories, is showing jus the BT 8010 and the advantage, The Jetware is giving solution almost for all. The BT 8010 was not on the list of devices but using the NOkia one worked fine.
Jabra BT 8010 - Solution to display Caller ID
--------------------------------------------------------------------------------
As the first instructions caused some confusion, and some people couldn’t get Jabra to show caller ID, hear are them more complete.
Don’t forget that caller ID only “works” if the caller is in your contact list in the HTC X7500.
A problem still remains: Dialling from Call List in BT8010 doesn’t work
1 – Delete the paring between HTC X7500 and Jabra (if you have one).
2 - Upgrade the Jabra to V1.33 . (http://uswww03.gnnetcom.com/Myjabra/... enter_na.html)
3 – Install Jetware V1.30 on your HTC X7500 (http://www.jetwaremobile.com/)
4 – Soft reset Your HTC X7500
5 – On your HTC X7500, go to -> Start -> Programs -> Bluetooth Options -> Hands-Free Config ->
Menu -> Advanced options -> Ok. Here, at least, you must select /check this options:
.Phonebooks
.Messaging
.Caller ID
.Query status indicator
.Update status indicators
.Hang up/swap to incoming call
6 – Establish a new paring.
7 – On your Jabra settings select -> Display -> Caller ID and select -> ON
8 - From your Advantage (connected to ActiveSync or GPRS) go to this link (http://www.jetwaremobile.com/bthfx/D...kia_HS-12W.jcf.)
9 - When you download that file you should get a prompt asking which paired Bluetooth device the settings should apply to
Choose -> Jabra and -> Done.
10 – Soft reset your HTC X7500.
11 – Turn off your Jabra.
12 - Turn on your Jabra
Regards
__________________
AM