[Qtek2020]: Error 112: CE Rom Update Error. PLEASE HELP ME!

[lukappaseidue]

Hi people,
I'm Luca from Italy, and I'm writing here hoping that You can help me to recover my dead PPC.
My PPC, when living, had Windows Mobile 5 like O.S.
So, As i've some problems with the phone I've decided to downgrade the radio version from 1.17 (people say that it is buggy) to 1.08.
So i run the HimaUpgradeUt_noID (I've also HimaUpgradeUt), but i've forgotten to delete the NK.nbf file from the directory.
I put the PPC in bootloader mode (SERIAL on top and ver. 1.06 on bottom) and then to the cradle directly to the motherboard USB connector
The sofware begin to update upgrading even ROM CE file, but when it arrived at 31% himaUpgrade stopped its work, showing that I need to reset (only normal reset and not soft reset) the PPC :( From this time until now my PPC show always and only the bootloader view.
When I try to upgrade again, the himalaya soft don't show what my PPC has like rom or radio version. It shows only the Ce rom and Radio that I'm going to ugrade.
It seems that software isn't able to erase ROM IMAGE
Active sync can't identify the device (some time it is indentified as unknown device).
When i start the software for ugrade the Active sync tray icon disappear.
I'm only able to ugrade radio stack or ExtRom.
PLEASE PLEASE PLEASE, HELP ME.
P.S. The device is unlocked

[Rudegar]

2 hits

http://www.expansys-kr.com/ft.aspx?k=21161
"Edited:- Problem solved, I loaded the upgrade from a different PC. I don't know why my main PC would not work as that is the one I regularly sinc the pocket PC to, but it just kept aborting the upgrade. Anyone else having this problem, try another PC."

if you're lucky

http://forum.xda-developers.com/showthread.php?t=235482&highlight=Failing+ROM+Update+Jam.+Error+112+CE+Fai led
"it was stoping with an upgrade error at the very beggining of the extended ROM flashing no matter which ROM you were flashing to it! At the end they exchanged it for a new one, probably the ROM chip was faulty!"

if you're unlocky

[lukappaseidue]

Hi Rudegar,
first MANY MANY MANY THANKS for Your support.
I'm very unlucky.
I'm not able to upgrade my PPC.
The strange thing is that i can upgrade Radio Stack and even Extended Rom!
Only CE ROM wont' update.
Previous CE ROM installed was AKU 3.5 and Windows Mobile 5.0
Everythings worked fine.
Non other way?
I've seen that after launched del himaupgradeUt_noID the Activesync tray icon ho away.
My PPC sometimes ins't "seen" by my XP while other times it is "unknown device"
:(
Why Can I only update RADIO and Extended Rom, while CE Rom not?

[lukappaseidue]

... P.S.
evey kind of button that I push the PPC is always in Bootloader Mode!
I'ev tryed: POWER + CAMERA + REC + STYLUS over the hole.
When I put the PPC to battery charger, red led is on until nothing is on the display, while when there is the written over the display, led is off.
No way to help me?

[lukappaseidue]

No news? I'm so sad :(

[kurt_hectic]

hello. i have the same problem but i have some suspections: i have 3 wersions of wm6 roms. one weight is 64 mb and others 32. and i tkink we are trying install rom from htc, dell or ipaq to our mda or other... so- fuck this wrong rom and search for normal rom for himalaya ->


take this one :

"
mirror in china ,but very rapid downloading

http://exs.mail.qq.com/cgi-bin/downl...3f0dd183418032

enter the code e506cd02 then go

thx to c_shekhar
"
screenshots: wm6 pro. : http://www.engadget.com/photos/windows-mobile-6-professional/

cheers :)