WM6 for HP iPAQ 4700 (kozhura Edition)

[dpdurst]

Should I install the WM6 R4 right now I have the 6.1 I think. If so where do I find it with the bootloader?

See my website in my signature

[matt_hull1991]

hey. im very new to this and only just got a hx4700 from a friend. really wanted to try and upgrade to wm6 cus pocketpc2003 was soooo boring. anwyay when i open up the bootloader and select the .rar file i get an error saying it cant find the port \\.\WCEUSBSH001 or something like that. i tried using mtty11a too but in the list of ports i dont get \\.\WCEUSBSH001, i get COM2 and COM1 and if i use COM1 it appears to maybe work cus i get a window pop up but i dont dare continue without knowing it'll work incase i screw it up.
anyone know whats going on??

[dpdurst]

hey. im very new to this and only just got a hx4700 from a friend. really wanted to try and upgrade to wm6 cus pocketpc2003 was soooo boring. anwyay when i open up the bootloader and select the .rar file i get an error saying it cant find the port \\.\WCEUSBSH001 or something like that. i tried using mtty11a too but in the list of ports i dont get \\.\WCEUSBSH001, i get COM2 and COM1 and if i use COM1 it appears to maybe work cus i get a window pop up but i dont dare continue without knowing it'll work incase i screw it up.
anyone know whats going on??

Did you put the device into bootloader mode, the error you mention is one you get when your not in bootloader mode on the 4700. If your not sure or your not, suggest you get the documentation for flashing the 4700 and follow the steps. There is no need to select a port if your in bootloader mode, you just say ok and it works.

[matt_hull1991]

its ok now. i ran it on XP and it appears to be working so far. fingers crossed it makes it all the way. thanks anyway (Y)

[afm528]

Upgraded to 6.1 and everything is great except that I can't use Transcriber or Calligrapher. I've spent hours searching for a solution with no success, so I'm putting it up here. I've installed Transcriber 1.5, the latest I could find, but it's inconsistent and doesn't work properly. I've tried every possible way of installing Calligrapher 8.7, but it seems that it needs a good install of Transcriber in order to work. I won't go through the 20 different things I've tried to make either of these work, but trust me, I've tried!

Does anyone have a solution, or even a recommendation of another handwriting input app? This is crucial for me, I need something more than block recognizer.

Thanks,
Michael

[Sun-easy]

I just installed WM6.0 on my hx4700 and love it. However, it has some strange behaviors:
1. A couple of times, I had it powered off only to discover several hours later a depleted battery and it would not turn on until put on charger. It does retain all application and data, not like WM2003SE, which would lose everything.
2. The keyboard icon at bottom center sometimes disappears at the start-unlock screen just when I was keying in my password. When I tap on the spot where it was, it came back on.
Has anyone experienced the same behavior and are there patches, or should I get WM6.1? Thanks.

[Sun-easy]

Also, the power button sometimes would not turn on the device and requires a soft reset.

[AleksandarV]

Honorable.

I have HP hx 4700 Windows Mobile 2003 Second Edition version 4.21.1088 (Build 15045.2.6.0).

Should I first flash it with WM 5 and then proceed to the VM 6.1?

Which application will remain (PocketWord, Excel etc)?

With respect

[LcsBrc]

Hi everybody!
Excellent work you´ve done!
I have upgraded my 4700 form wm2003SE to WM5 and then to WM5.1
Now, I would like to install the WM6.1 rom in my IPAQ hx4700, but i want to be sure that there is a safe way to revert to original wm2003SE if any of the applications i usually need doesn´t work properly with this new WM version... So, what can you say about it.... Is there a safe way to revert?...
Anything you write will help!
If there is a safe way to revert, can any of you explain it step by step??
thks
Thanks very much!

[rparson]

Does anyone still have a copy of Running voice gsm? I searched the world over and I cannot find my copy that I use to use with my HP Ipaq 4700. Recently I decided to purchase an Ipaq 211 and an ericsson phone to do it the oldy but goody way. Thanks
Ron

[lanii941]

hey pls can you tell me how to install it pls i cant install it what is bootloader pls someonehelp?!?!?!?! :(

[lanii941]

I just installed it and all I can say is... WOW! I didn't know my hx4700 could fly!

hey can you help me i cant install it i dont know how to install it what is bootloader pls help me when you can or someoneother help pls:confused:

[dpdurst]

hey can you help me i cant install it i dont know how to install it what is bootloader pls help me when you can or someoneother help pls:confused:

All the information you need is on my website listed in my signature.

[lanii941]

hey i do the bootloader but now i cant open with port 2 the pocket pc because the progam say cant open the file is to large for command: lnb OS_WM6.nb0

[lanii941]

All the information you need is on my website listed in my signature.

i dont know how to install it can you help me wioth photos or when you have msn give it to me

[DavidinCT]

Did anyone ever create a 6.5 rom for the 4700 ?

[lanii941]

Did anyone ever create a 6.5 rom for the 4700 ?

hey pls can you help me i cant install it pls help me do you have msn

[dpdurst]

hey i do the bootloader but now i cant open with port 2 the pocket pc because the progam say cant open the file is to large for command: lnb OS_WM6.nb0

I don't know if your changing the port numbers or what when the TTY program opens up but just leave everything at default. If your using Vista then your going to need to load the vista driver. I have flashed every one of these and never got a file to large error.

[dpdurst]

Did anyone ever create a 6.5 rom for the 4700 ?

Nope not yet, its only out for the hx2000 series

[lanii941]

Nope not yet, its only out for the hx2000 series

here my msn we can speak better on msn pls add me and help me pls:(

[dpdurst]

here my msn we can speak better on msn (lanii.1994@hotmail.com) pls add me and help me pls:(

Sorry I don't give out my MSN. Its not hard to figure out. You haven't answered the questions asked earlier

[lanii941]

Sorry I don't give out my MSN. Its not hard to figure out. You haven't answered the questions asked earlier

hey can you help me with pictures or with videoclips and why you dont give me your msn im not hacker i dont do anything pls help need help:(:(:(:(:(:(

[dpdurst]

hey can you help me with pictures or with videoclips and why you dont give me your msn im not hacker i dont do anything pls help need help:(:(:(:(:(:(

Dude, first of all I asked a few questions and you don't answer, I don't give my info to anyone, that's the way it is. I'm not playing tech support because someone doesn't understand, I don't have the time. The instructions work, the boot loader works, there is not much more to the deal. Its pretty simple. I suggest you keep trying like we all did.

[VulcanTourist]

Jeez... "Junior Member" is an apt description of this guy, isn't it? First time I've ever seen such a persistent determined whiner in a forum.

Dude, learn how to be at least marginally self-sufficient. It seems like you're choosing to remain helpless, and that won't earn you respect, especially not in these forums (xda-developers.com).

[lanii941]

Dude, first of all I asked a few questions and you don't answer, I don't give my info to anyone, that's the way it is. I'm not playing tech support because someone doesn't understand, I don't have the time. The instructions work, the boot loader works, there is not much more to the deal. Its pretty simple. I suggest you keep trying like we all did.

hey help me when you can pls i want to install i try but when i go to port 1 he open that and than in the destruction say (In "Port" choose \\.\WCEUSBSH001 and click OK) i cant do this part help me to this part and i dont know were to write this (Write command: lnb OS_WM6.nb0) help pls to this parts 2 parts pls pls pls help:(:(:(


and im using Windows 7 x64 Finall version 7600 i got bootloader

[dpdurst]

hey help me when you can pls i want to install i try but when i go to port 1 he open that and than in the destruction say (In "Port" choose \\.\WCEUSBSH001 and click OK) i cant do this part help me to this part and i dont know were to write this (Write command: lnb OS_WM6.nb0) help pls to this parts 2 parts pls pls pls help:(:(:(


and im using Windows 7 x64 Finall version 7600 i got bootloader

First off I doubt this will work in x64 Windows 7 since it does not in x64 Vista. However it works fine in x86 Vista or Win 7. You are going to need the vista drivers for the HP port that are posted on my page. when you open up bootloader it asks for the file to be selected .nbo or .nbf, once you do this it opens it up and then the TTY program opens, you just say ok in that program and don't change anything. I suspect that the x64 bit is your issue. or you haven't tried to replace the HP drivers in device manager with the ones listed on my page.

All this is covered in my instructions I wrote up on flashing the 4700, did you read them? The only thing not in the instructions is the info I just gave you on getting the correct HP port drivers for the device to work in Vista or Win7

[lanii941]

First off I doubt this will work in x64 Windows 7 since it does not in x64 Vista. However it works fine in x86 Vista or Win 7. You are going to need the vista drivers for the HP port that are posted on my page. when you open up bootloader it asks for the file to be selected .nbo or .nbf, once you do this it opens it up and then the TTY program opens, you just say ok in that program and don't change anything. I suspect that the x64 bit is your issue. or you haven't tried to replace the HP drivers in device manager with the ones listed on my page.

All this is covered in my instructions I wrote up on flashing the 4700, did you read them? The only thing not in the instructions is the info I just gave you on getting the correct HP port drivers for the device to work in Vista or Win7
were to find the HP driver port give a link pls or can you help me with teamviewer? because my english is bad and yes i have the HP hx 4700

[dpdurst]

were to find the HP driver port give a link pls or can you help me with teamviewer? because my english is bad and yes i have the HP hx 4700

I think its becoming apparent that either you really don't know what your doing or you really have not followed one instruction given.

Everything you need again is on my website! instructions on how to load the driver is in the zip file.

Have you even downloaded the instructions on how to flash the unit?

Look, if you having this much trouble just trying to figure this out with all the information available, maybe you should not be doing this. I suspect you are way over your head and if you brick your unit, your on your own. I suggest you find something else to play with that is easier to understand othewise. READ the instructions and check the other links to forums out on my website and try to understand what your doing. We are not going to hold your hand anymore.

[dpdurst]

I'll give you one shot at doing this lets see if you can follow:

Everything you need again is on my website

1. Download instructions on how to flash hx4700
2. Download USB drivers and read the included text file on how to install
3. Download the Bootloader
4. Open instructions and read on how to install bootloader, where to put the files and how to get into bootloader mode.
5. Flash your device per instructions and reset per instructions.

This is about as much as I'm going to do. Your on your own at this point. As I said before, if you can't understand any of this, then don't do it and find something else to occupy your time with.

If you brick your device or mess it up, don't ask for help your on your own.

[lanii941]

Wifi works perfect for me!

can you help me i cant install it do you have msn pls help me:(

[lanii941]

It's so happy.
'cause I got new ROM(AKU WM6) today.
- AKU WM6 is better than HP's orginal ROM.
- so fast
- so beautiful
Thank you.

I have a question

I. 480X640 mode(Apply VGA heck program)
- I used 'OzVGA' (OzVGA is resolution converting program)
- But OzVGA is not working at AKUWM6
- I seen opening picture at soft re-set
- it is two.(1 is 240-320 2 is 480-640)
- so I think AKU ROM is support 480X640 resolution mode
Please help me(apply 480X640 resolution mode)
- I think... AKU ROM require another program
- I can't find another VGA heck program.

II. paging pool apply
- This AKU WM5 ROM is sooooooooooooooooooo fast
(It seems to It is not require paging pool)
But My hx4700 is RAM-upgraded(128M)
- I want my extra RAM use!! ㅠ_ㅜ(I was RAM upgrade only for Paging-pool)
- How can I apply Paging-pool(48M, ohter)?
- Is 'AKU WM6' not require paging-pool?

and Thank you. Thank yoy. Thank you.
You are best programer.

can you help me i dont know hot to instal it do you have msn?

[dpdurst]

can you help me i cant install it do you have msn pls help me:(

Dude you should find something else to do, your begging is making it so you won't get no help. Have fun...

[lanii941]

Dude you should find something else to do, your begging is making it so you won't get no help. Have fun...

but pls can you help me pls pls pls i want to do my HX 4700 in 6.1

pls help :(:(:(:(:(:(

do you have msn or something else find something to help me?!?!:(

[dpdurst]

but pls can you help me pls pls pls i want to do my HX 4700 in 6.1

pls help :(:(:(:(:(:(

do you have msn or something else find something to help me?!?!:(

Your pretty funny, I told you the steps to take and you still cry like a baby.. good luck in finding help acting like this.

[lanii941]

Your pretty funny, I told you the steps to take and you still cry like a baby.. good luck in finding help acting like this.

hey can you help me with photos or no?:confused:

[dpdurst]

hey can you help me with photos or no?:confused:

Here is the info again, if you can't follow please don't ask for any further help.

Everything you need again is on my website

1. Download instructions on how to flash hx4700
2. Download USB drivers and read the included text file on how to install
3. Download the Bootloader
4. Open instructions and read on how to install bootloader, where to put the files and how to get into bootloader mode.
5. Flash your device per instructions and reset per instructions.

This is about as much as I'm going to do. Your on your own at this point. As I said before, if you can't understand any of this, then don't do it and find something else to occupy your time with.

If you brick your device or mess it up, don't ask for help your on your own.

[Flyer1969]

It is a bit old, but it gives some direction on what he needs... maybe... and should be used with the instructions on the dpdurst's website:

http://www.youtube.com/watch?v=4cltN7fhxks

Regards

[lanii941]

Here is the info again, if you can't follow please don't ask for any further help.

Everything you need again is on my website

1. Download instructions on how to flash hx4700
2. Download USB drivers and read the included text file on how to install
3. Download the Bootloader
4. Open instructions and read on how to install bootloader, where to put the files and how to get into bootloader mode.
5. Flash your device per instructions and reset per instructions.

This is about as much as I'm going to do. Your on your own at this point. As I said before, if you can't understand any of this, then don't do it and find something else to occupy your time with.

If you brick your device or mess it up, don't ask for help your on your own.

give a link for bootloader and driver USB:D

[lanii941]

Here is the info again, if you can't follow please don't ask for any further help.

Everything you need again is on my website

1. Download instructions on how to flash hx4700
2. Download USB drivers and read the included text file on how to install
3. Download the Bootloader
4. Open instructions and read on how to install bootloader, where to put the files and how to get into bootloader mode.
5. Flash your device per instructions and reset per instructions.

This is about as much as I'm going to do. Your on your own at this point. As I said before, if you can't understand any of this, then don't do it and find something else to occupy your time with.
http://forum.xda-developers.com/attachment.php?attachmentid=209841&stc=1&d=1248786636
If you brick your device or mess it up, don't ask for help your on your own.

i have it i have boot loader but see what he say to me my Windows Mobile 2003 is German i need German Windows no English pls ive me link for German

http://rapidshare.com/files/260997159/Picture_Error.rar.html



Problem Fixed nice i Install the Kozhura Edition 6 Classic

[dpdurst]

i have it i have boot loader but see what he say to me my Windows Mobile 2003 is German i need German Windows no English pls ive me link for German

http://rapidshare.com/files/260997159/Picture_Error.rar.html

Not sure what your talking about, it looks to me again you didn't follow the instructions on the installation of the bootloader. It should be in c:\bootloader or d:\bootloader and not in any other path.

As far as I know there is NO german 6.0 or 6.1 version

[lanii941]

Not sure what your talking about, it looks to me again you didn't follow the instructions on the installation of the bootloader. It should be in c:\bootloader or d:\bootloader and not in any other path.

As far as I know there is NO german 6.0 or 6.1 version


oh i dont know that (should be in c:\bootloader or d:\bootloader)

thx i will try on this model

[dpdurst]

oh i dont know that (should be in c:\bootloader or d:\bootloader)

thx i will try on this model

You see that is what I keep trying to explain to you, if you would just download the instructions on my website for flashing the 4700 all this info is in there and maybe you would not have such a hard time. But hey, I guess you like doing this the hard way..

[lanii941]

You see that is what I keep trying to explain to you, if you would just download the instructions on my website for flashing the 4700 all this info is in there and maybe you would not have such a hard time. But hey, I guess you like doing this the hard way..

hehe no but the bootloader i cant find pls give link for bootloader hehe i have it but dont know what for version do i need

[dpdurst]

hehe no but the bootloader i cant find pls give link for bootloader hehe i have it but dont know what for version do i need

You can't be serious?

I'm sorry, your going to have to try a bit harder to understand this stuff. You have bootloader, you didn't follow directions on installing, you won't download the instructions.. WOW.. have fun..

[grayme]

hehe no but the bootloader i cant find pls give link for bootloader hehe i have it but dont know what for version do i need

What is your address, I'll come round and install it for you.

[lanii941]

What is your address, I'll come round and install it for you.

here dont need more help i fix the problem

[lanii941]

You can't be serious?

I'm sorry, your going to have to try a bit harder to understand this stuff. You have bootloader, you didn't follow directions on installing, you won't download the instructions.. WOW.. have fun..

hey who is the best Kozhura or Alkor b3

[Flyer1969]

I'll give you a hint: accurate reading of the previous 2546 posts on this thread will give you some more information about all the possibilities of the ROM's, their pros and cons.

Regards

[grayme]

here lanii.1994@hotmail.com

Is that in Italy?

[lanii941]

Is that in Italy?

no albanish

[grayme]

no albanish

Is that near Birmingham?

[spud42]

Albania tosser...lol

[duuhh]

I installed the Win Mobile 6.1, taken from this site.. And I have 2 questions:

is it possible to use the storage as ram memory? When I open IM+ and Skype, is not possible to open also Opera, because the system automatically closes IM+ and Skype :(
With the old Win 2003 we could switch between memory for ram usage and storage usage.
Is it possible to install an application bar? Is so stressful to use everytime the so slow iTask button to switch between opened applications.

[grayme]

Albania tosser...lol

Oh dear. :rolleyes:

I think you have spectacularly managed to miss my point; the same that dpdurst struggled for pages of posts to impart on poor lanii941.

I installed the Win Mobile 6.1, taken from this site.. And I have 2 questions:

is it possible to use the storage as ram memory? When I open IM+ and Skype, is not possible to open also Opera, because the system automatically closes IM+ and Skype :(
With the old Win 2003 we could switch between memory for ram usage and storage usage.
Is it possible to install an application bar? Is so stressful to use everytime the so slow iTask button to switch between opened applications.


1). No

2). Try WKTask (http://soft.photoracer.net/docs/wktask_en.html), works great for me.

[mwcostello]

Has anyone found or heard of someone porting WM6.5 for the 4700 yet? All I've been able to find to date has been faux links. I've upgraded (many many many times) various ROMs for my Hermes, Kaiser, and Raphael (8525, Tilt, Fuze) and would love to see 6.5 on my 4700.:)

[duuhh]

***********

[spud42]

Oh dear. :rolleyes:

I think you have spectacularly managed to miss my point; the same that dpdurst struggled for pages of posts to impart on poor lanii941.


lets just call it a blond moment and walk away...lol

[El-capitain]

Hi new here.

Succesfully insalled the new Windows Mobile and all is well. But I seem to have a glitch with Bluetooth. It works fine (using Internet explorer) but then after disconnecting it won't start up again and I can't even get into the Bluetooth settings.

I seem to recall reading somewhere that there is a Bluetooth glitch which occures acte upgrading WM but that it can be sorted out - but I can't find it anywhere.

Any suggestions?

[dpdurst]

Here is what I can tell you about this. The BT stack appears to work fine when connecting up to a BT GPS reciever, I can connect/disconnect all day long with no problems.

Now then I have a bluetooth GPS receiver plugged into my serial port of my PC I use for talking between Flight Sim and my GPS for moving map. When I disconnect from that device, it will never reconnected. I have to reboot everything just to make another BT connection. I have never been able to get that part resolved.

[dourkilt]

hi can i put it also on a hp ipaq h4150 i read a lot of it but i don't know how

[grayme]

hi can i put it also on a hp ipaq h4150 i read a lot of it but i don't know how

No you can't.

[zoftdev]

The simply solution for import self cert is

just create a directory:
\windows\system\CertDtls
and then i could open the certificate and it would install and then tell me that it had installed the certificate.

http://timjacobs.blogspot.com/2008/08/wm6-and-self-signed-certificates.html