◄ New Rom ◄ EVO7 WM6 - Build 18125!

[Da9L]

Hello everyone !

Heres a new rom.. :)

This rom is from taiwan made by Youzii.
- Build 18125
- No Cube, but TouchFLO and Touch Comm manager
- Including some tools and apps (Pocket RAR, psshutxp, pbar, and more!)
- Very stable and fast !
- Page Pool is 6 MB !

NOTE !
I have just updated this version and it works very well, BUT you might use the NVID WM5 rom before you flash this one, NOT the one which is included.. That made my phone start to boot loader..

Download Link:
Here (http://cid-8231c261cbdd4326.skydrive.live.com/browse.aspx/818EVO/EVO7en)

I have changed the files a little so they now look more like the ones we are used to..
http://da9l.4shared.com/
1. Under the EVO7 folder download both EVO7.part1.rar and EVO7.part2.rar
2. Begin with the extraction of part 1.. Run the exe thats the right for you
3. Now after flashing is done remain the pda unused and extract EVO7.part2.rar
4. Run Upgrade_Rom.bat and wait for its completion. Do as the utility tells you to
5. And now the rom should be installed !

Pictures in the bottom if the thread!

[shiraz-mobile]

Thank You For ROM

All is OK

[vlodeck]

The page pool is 6mb.

[Da9L]

Thank you ! :) will update it !

[iiiox]

Thank you for sharing, Da9L!!

As in EVO7tw, Cube and HTCHome can be installed in EVO7en indepandantly with removable cab files later.^^

Visit http://cid-8231c261cbdd4326.skydrive.live.com/browse.aspx/818EVO/EVO7en to download the long-waited Cube and HTCHome cabs now!!


Thank Support for the mirrors:
http://rapidshare.com/files/51991260/EVO7en.part1.exe
http://rapidshare.com/files/51991566/EVO7en.part2.rar
-------------------------------------------------------------------
How to falsh your device to EVO7：
-------------------------------------------------------------------
1.Flash PV_TEMP (download PV_Temp http://tom-love.net/Rom/Prophet/WM6....et_PV_Temp.zip )

2.Install Cert_SPCS.cab、EnableRapi.cab to the wm5 PVTEMP (your ppc).

3.Execute EVO7.part1.exe >> choose upgrade method 3 (No bother to try part 2, double click EVO7.1 Part 1 will do the tricks)
Note: Part 1 and Part 2 are the same file devided into two parts. The former is a self-decompressing file which associates the latter by itself)

4.Wait for 20 mins or so. (or you may like to check PdocWrite out in your PC for time's saving.)

5. 1st device configuration (the first time)

6.Hard-reset (type 1234 on Clear Storage, rather than hold two buttons + the tiny hole pricking, is strongly recommanded).

7. 2nd device configuration (the second time)

8. Start enjoying your "brand-new" device!
-------------------------------------------------------------------

Wanna try EVO7tw (with removable Cube and HTCHome)?? Here is the link to the original thread:
http://www.mobile01.com/topicdetail.php?f=224&t=385791&last=3478621


Tips: ---------------------------------------------------------------------
1. The default region is Taiwan which can be changed at "Start\Settings\System\Regional Settings\Region.

2. Support Far-East characters including troditional Chinese, simplified Chinese, Japanese, and Korea, etc,. To display the characters properly please set the region accordingly at the same path above.

3. It's strongly recommanded to update the new version of G4 SIP Tweak, a third party application incorporated in EVO7en, for a better dispaly to the app.

4. The blue lines on the uppermost screen is an application to show battery and memory status on the left and right part respectively. Disable it by deleting pwrstat.lnk at the folder of Windows\Startup if it is not right to your eye^^|||

5. If you prefer the original contacts, disable the built-in PocketCM by assing the right soft-button to Contacts with Soft Key at Start\Settings\System.

6. No higher than 264MHz over-clock is recommanded for stability, though 274MHz works fine for some devices.

7. The clock on the upper menu bar can be changed to the battery icon by editing the value of registry as below:
[HKEY_LOCAL_MACHINE\Software\Microsoft\Shell] "ShowTitleBarClock"=dword:0 >> battery display (1 = clock display)

8. Button 4 is yet to assign. Do it with Buttons at Start\Settings.

9. Edit the values of registry as below to modify the sensitivity of Touchflo (finger scrolling):
HKEY_LOCAL_MACHINE\Software\OEM\TFLOSettings "SpeedHigh" (20 is recommanded) and "SpeedLow" (65 is recommanded).

10. To edit registry, you may like to run the built-in Task Manager at "Today\Programs\Tools". There is an app named RegEdit listed on the buttom of the menu.

11. X-button, thanks to the freelancer contributing it, seems to take to built-18125 better than pBar 1.4. (my case is that there are always 20M or so left no matter how long the device runs)

12. For whom like to read Thai characters properly, please visit the EVO7en link to download EVO extFont.cab

13. Original IM (原生輸入法) installation:
Copy all files OriginalIM.zip into the Windows folder
Import the registry file PhonIM.zip (注音輸入法).

Chajeiim (倉頡輸入法) and Mboxcht (手寫板輸入法) installation:
Copy the AdditionalDll.zip files into Windows
Import All_Chtim.reg instead.
You'll get all three input methods at once.

OriginalIM >> http://forum.xda-developers.com/attachment.php?attachmentid=48906&d=1188663728
PhonIM >> http://forum.xda-developers.com/attachment.php?attachmentid=48907&d=1188663758
AdditionalDll >> http://forum.xda-developers.com/attachment.php?attachmentid=48908&d=1188663783
AllChiIM >> http://forum.xda-developers.com/attachment.php?attachmentid=48909&d=1188663798

14. To get Chinese lunar calendar, change the value of the Dword, "ShowLunarCalendar", under "HKEY_LOCAL_MACHINE\Software\Microsoft\Calendar" from "0" to "1"

15. The letters chopped on the setting pages can be sloved by editing the registry as below: (Note: not for Chinese users)

[HKEY_LOCAL_MACHINE\nls] "SystemLCID"=dword:404 << change dword from 404 to 409

16. Users who are not good at modifying registry please install EVO ENGfix.cab to fix the letter-chopping problem on some setting pages.
http://forum.xda-developers.com/attachment.php?attachmentid=49966&d=1189363816

17. For whom who like to have the setting pages for HTCHome, please install EVO HTCHomeSettings.cab.
http://forum.xda-developers.com/attachment.php?attachmentid=49970&d=1189364038

18. Users who like to check your namelist with Celedial instead of the default SmartDialing, please modify the registry as below:

[HKEY_LOCAL_MACHINE\Security\Phone\Skin]
change the path from "Ext"="\\windows\\phcanhtc.dll" to "Ext"="\\windows\\celedial1.dll" (reboot your device to get it^^)

--------------------------------------------------------------------------

Note: The Evo7 series supports devices listed as below:
* SPV M600
* Qtek S200
* i-mate JAMin
* Dopod 818 Pro
* Dopod 830
* XDA neo (O2 Germany)
* VPA Compact S (Vodafone Germany)
* TC 500 (T-Home Germany)

[dioxda2]

Flashed and using in the speed of 264. Everything goes so fine, I like its WLM version .2600, no need to mess up my contacts information ......

and I like the function of touchflo although its a bit too sensitive for my clumsy thumb.... ^_^

kool job. ^_^

SUPPORT!! :D

[iiiox]

Flashed and using in the speed of 264. Everything goes so fine, I like its WLM version .2600, no need to mess up my contacts information ......

and I like the function of touchflo although its a bit too sensitive for my clumsy thumb.... ^_^

kool job. ^_^

SUPPORT!! :D

Edit the values of registry as below to modify the sensitivity:

HKEY_LOCAL_MACHINE\Software\OEM\TFLOSettings
SpeedHigh (20 is recommanded)
SpeedLow (65 is recommanded)

To edit registry, please run the built-in Task Manager at "Today\Programs\Tools". There is an app named RegEdit listed on the buttom of the menu.

[DIOWONG]

Edit the values of registry as below to modify the sensitivity:

HKEY_LOCAL_MACHINE\Software\OEM\TFLOSettings
SpeedHigh (20 is recommanded)
SpeedLow (65 is recommanded)

To edit registry, please run the built-in Task Manager at "Today\Programs\Tools". There is an app named RegEdit listed on the buttom of the menu.


Dear iiiox,

noted, set, enjoying now!! ^_^

[taraepanda]

Thai font cannot display on today screen, how can I solve this problem?
I already change regional setting to "Thai".
thanks

[mark_vip]

ITS NOT WORK!
first step: i did upgrade by ROMUpdateUtility_NV_G4
*then HARD-RESET
when Windows 5 was loaded i started UPGRADE_ROM -
new OS not uploaded into device :/
(
extracted OS
Initializing...........End Time
)

[tb146]

Hi There,

Can anyone inform me what is G4 SIP Tweak.cab intend to. Is it only for G4 hardware ?

If i have G3 hardware , should i use it ?

Thanks

[iiiox]

Hi There,

Can anyone inform me what is G4 SIP Tweak.cab intend to. Is it only for G4 hardware ?

If i have G3 hardware , should i use it ?

Thanks

Hi, nothing has to do with G3 or G4 chips. It's an application to set the default loaded IM (input method), to hide uncessary IMs, and to assign the default display of fonts.

[fungsaikit]

Big Brother iiiox is promoting EV07 English version here! This is a very great ROM. I am using the Chinese version now. It is very stable and fast.

One more important thing is that for all who prefer the BT sound quality of Fantastic B4 but not pleased with its stability and speed, this one will be your solution. Per Youzhi, he has used the A2DP driver from P800W. You will not hear any hiss sound under this ROM. I have tested it with my iTech S38 and Sony HBH-DS220 with great level of satisfaction.

Try it and you will love this ROM!

[iiiox]

ITS NOT WORK!
first step: i did upgrade by ROMUpdateUtility_NV_G4
*then HARD-RESET
when Windows 5 was loaded i started UPGRADE_ROM -
new OS not uploaded into device :/
(
extracted OS
Initializing...........End Time
)

Not totally sure what your point is. If it is that your device failed to upgrade from wm5 to EVO7, try the steps listed below.

How to falsh your device to EVO7：

1.Flash PVTEMP (you can find it at the forum everywhere, literally speaking^^")

2.Install Cert_SPCS.cab、EnableRapi.cab to the wm5 PVTEMP (your ppc).

3.Execute EVO7.part1.exe >> choose upgrade method 3 (No bother to try part 2, double click EVO7.1 Part 1 will do the tricks)
Note: Part 1 and Part 2 are the same file devided into two parts. The former is a self-decompressing file which associates the latter by itself)

4.Wait for 20 mins or so. (or you may like to check PdocWrite out in your PC for time's saving.)

5. 1st device configuration (the first time)

6.Hard-reset (type 1234 on Clear Storage, rather than hold two buttons + the tiny hole pricking, is strongly recommanded).

7. 2nd device configuration (the second time)

8. Start enjoying your "brand-new" device!

[tb146]

Hi, nothing has to do with G3 or G4 chips. It's an application to set the default loaded IM (input method), to hide uncessary IMs, and to assign the default display of fonts.

Thank you bro for your explanation.... downloading now...

I will flash step 1 with PV Temp ..then EVO7.1 part2 , is it right ?

Perhaps you can guide me how to flash this ROM.

Thanks

[iiiox]

Big Brother iiiox is promoting EV07 English version here! This is a very great ROM. I am using the Chinese version now. It is very stable and fast.

One more important thing is that for all who prefer the BT sound quality of Fantastic B4 but not pleased with its stability and speed, this one will be your solution. Per Youzhi, he has used the A2DP driver from P800W. You will not hear any hiss sound under this ROM. I have tested it with my iTech S38 and Sony HBH-DS220 with great level of satisfaction.

Try it and you will love this ROM!
Haha!! Brother fungsaikit, I'm here only because Youzii's out of sight at the time being^^" You know that I can solve few problems@_@..... Only if Youzii ansers calls in person here....
BTW, why don't you try EVO7en^^?? It's even faster (though fewer applications like removable HTCHome and Cube at this moment^^)

[fungsaikit]

Hi, please follow the following steps:

1. Flash the PV Temp Rom;
2. Install the Cert_SPCS cab to your device;
3. Install the EnableRapi cab to your device;
4. Double the file name EVO7.1 Part 1;
5. Choose 3 on the cmd screen;
6. Wait 20 minutes at least;
7. Disconnect the USB;
8. Press the soft-reset button on the bottom. Then press the camera button and command manager button simutaneously. When you see a few lines of words on the black screen, press the phone-calling button. You will see "FAT Format is completed".
9. Enjoy!

[iiiox]

Thank you bro for your explanation.... downloading now...

I will flash step 1 with PV Temp ..then EVO7.1 part2 , is it right ?

Perhaps you can guide me how to flash this ROM.

Thanks

Hi, "How-to-do" had been added to the fourth post on the thread^^"
Note: Devices can be upgraded via three options. The method I posted here is the most reliable one^^

-------------------------------------------
haha!! thank yuu very much, brother fungsaikt!! both of us offered the same solution^^!

[fungsaikit]

Hehehe, I am a bit lazy recently. Maybe because I flashed my 818 Pro at least 3 to 4 times a day before. Now the EVO7.1 is really fantastic. It is very stable and fast. The new method of calling out the cube can't be better in elsewhere. Also, I am playing with my new BT headset Sony HBH-DS220 these 2 days. Hehehe.... forgive me being a bit lazy to flash new ROM.

[tb146]

Hi, "How-to-do" had been added to the fourth post on the thread^^"
Note: Devices can be upgraded via three options. The method I posted here is the most reliable one^^

-------------------------------------------
haha!! thank yuu very much, brother fungsaikt!! both of us offered the same solution^^!

So sorry, cannot wait to flash so i miss to read it.

Thank you guys....

[mark_vip]

u used *.bat from other ROM ;)
but now i have other question:
how i can make change font ? i want use Thaoma

[iiiox]

u used *.bat from other ROM ;)
but now i have other question:
how i can make change font ? i want use Thaoma

The default font is the very Tahoma (sounds like big hippo in Chinese, ha!).
To change the system, menubar and pop-up menu fonts, please read the tips on the fourth post of this thread^^.
BTW: The pronoun "you" must refered to Youzii I guess. Yet I know nothing about where and when about the *.bat because EVO7en is created single-handedly by Youzii^_^

[chavdar]

Any known bugs up to this point?

[mark_vip]

The default font is the very Tahoma (sounds like big hippo in Chinese, ha!).
To change the system, menubar and pop-up menu fonts, please read the tips on the fourth post of this thread^^.
BTW: The pronoun "you" must refered to Youzii I guess. Yet I know nothing about where and when about the *.bat because EVO7en is created single-handedly by Youzii^_^

sorry, i mean pronoun "I"

[support]

mirror to my rapidshare account

http://rapidshare.com/files/51991260/EVO7en.part1.exe
http://rapidshare.com/files/51991566/EVO7en.part2.rar

[iiiox]

mirror to my rapidshare account

http://rapidshare.com/files/51991260/EVO7en.part1.exe
http://rapidshare.com/files/51991566/EVO7en.part2.rar
Thank you so much in the behalf of Youzii^^"
The links has been added to the fourth post of this thread, thx again!

[tb146]

Hi There,

Does anyboby tried this ROM ? can you provide the preview ?
i try to search it in to the original site but i cannot read the language.

- How is the battery life ?
- How is the memory availibility ?
- How is the bluetooth, wifi and infrared works ?

thank you

[firefox1996]

Tested time : 11 hours
Result :
- slow
- freeze (4-5 times) :mad:
- wifi working
- msn working

Installed apps: spb diary, spb weather

Back to PDAVIET touch v6 :)

[iiiox]

Hi There,

Does anyboby tried this ROM ? can you provide the preview ?
i try to search it in to the original site but i cannot read the language.

- How is the battery life ?
- How is the memory availibility ?
- How is the bluetooth, wifi and infrared works ?

thank you

Battery life = generally speaking, stardard, yet it depends on the clock you set for the CPU.
Memory avialibility: Storage ≒ 46M / Program ≒ 28.5M (no kidding)
bluetooth OK
VoiceSpeedDial activated by BT OK
WiFI OK
Infrared OK
A2DP quality: No hissing sound, next to fantastic v4

Why don't you give it a try^^? It takes only a little while to flash a rom, isn't it^^??

--------------------------------------------------------------------
FYI: The screenshots are the page of available memory and the applications in my system.

[Da9L]

Hi There,

Does anyboby tried this ROM ? can you provide the preview ?
i try to search it in to the original site but i cannot read the language.

- How is the battery life ?
- How is the memory availibility ?
- How is the bluetooth, wifi and infrared works ?

thank you


Battery life for me is very god

As you can see on the screenshot there aint that much memory, but thats why we have our storage cards ! The screenshot provided is from a fresh flash..
Everything works ! (wifi, infrared, bluetooth..)

[iiiox]

Tested time : 11 hours
Result :
- slow
- freeze (4-5 times) :mad:
- wifi working
- msn working

Installed apps: spb diary, spb weather

Back to PDAVIET touch v6 :)

Plz....check the system without installing any 3rd party softwares.
SPB softwares are notorious for their incompatibilities with WM6....(though I myself back up the system with SPB BackUP now and then without any problem)

And BE SURE your device has been hard-reset at least once before using it.

[tb146]

Battery life = generally speaking, stardard, yet it depends on the clock you set for the CPU.
Memory avialibility: Storage ≒ 46M / Program ≒ 28.5M (no kidding)
bluetooth OK
VoiceSpeedDial activated by BT OK
WiFI OK
Infrared OK
A2DP quality: No hissing sound, next to fantastic v4

Why don't you give it a try^^? It takes only a little while to flash a rom, isn't it^^??

Hi there,

Thanks for your preview, actually i will try it after finished the download, my connection is too slow.

My main concern for WM6 ROM, is having more memory without much application installed by default also i disalike the Home Plugins, it is to big to the screen and to slow to be loading.

Anyone has the preview

[tb146]

Hi There,

Tried to download the ROM from the mention site (first thread) but always reset to 0% if the file almost 95% done, does anybody have the same problem.

I use the site because i cannot download from rapidshare, my network do not allow to download from it.

Can anybody upload to another site ? Please

thanks

[Da9L]

Hi There,

Tried to download the ROM from the mention site (first thread) but always reset to 0% if the file almost 95% done, does anybody have the same problem.

I use the site because i cannot download from rapidshare, my network do not allow to download from it.

Can anybody upload to another site ? Please

thanks

I have uploaded to another place.. will update 1st post in a minute.. :)

[sahaniyas]

is this rom support SimToolKit?

[firefox1996]

Hi There,

Tried to download the ROM from the mention site (first thread) but always reset to 0% if the file almost 95% done, does anybody have the same problem.

I use the site because i cannot download from rapidshare, my network do not allow to download from it.

Can anybody upload to another site ? Please

thanks

i have the same problem. Don't use any download manager !

[Eladio.Linares]

Please, could anybody post a short bug report / known issues? How about Bluetooth Stack?

[chavdar]

@Da9L

Quick question - this is ROM contains only the OS, right? no IPL/SL and Radio.

And the two steps - step one includes WM5 and Step 2 - WM6? Is Is it absolutely necessary to downgrade with Step 1 (something in the ExtRom) or it can be done also with other WM5 ROMs?

[vlodeck]

chavdar: yes, this rom contains just the OS part.

You need to flash wm5 before wm6 if you want to have it working. You can use any wm5 rom I think.

[chavdar]

thanks vlodeck!

[bugsywabbit]

Battery life = generally speaking, stardard, yet it depends on the clock you set for the CPU.
Memory avialibility: Storage ≒ 46M / Program ≒ 28.5M (no kidding)
bluetooth OK
VoiceSpeedDial activated by BT OK
WiFI OK
Infrared OK
A2DP quality: No hissing sound, next to fantastic v4

Why don't you give it a try^^? It takes only a little while to flash a rom, isn't it^^??

--------------------------------------------------------------------
FYI: The screenshots are the page of available memory and the applications in my system.

is there a reason why there is so little program memory? I want to install other apps and fear may not run properly. already have SIP problem with gallum v6.

btw, is there a Simplified Chinese SIP built-in? Can I remove other languages eg Korean to have more memory?

[tb146]

is there a reason why there is so little program memory? I want to install other apps and fear may not run properly. already have SIP problem with gallum v6.

btw, is there a Simplified Chinese SIP built-in? Can I remove other languages eg Korean to have more memory?

anyone can help ? i want to remove the chinese and others except the english

[chavdar]

The ROM is really fantastic ! vary fast and very stable! But still can anyone explain the font anomaly - what I mean is that even if the system font is set to Tahoma, the start menu and the soft keys look different that the usual WM6?

[gokhanmoral]

Not totally sure what your point is. If it is that your device failed to upgrade from wm5 to EVO7, try the steps listed below.

How to falsh your device to EVO7：

1.Flash PVTEMP (you can find it at the forum everywhere, literally speaking^^")

2.Install Cert_SPCS.cab、EnableRapi.cab to the wm5 PVTEMP (your ppc).

3.Execute EVO7.part1.exe >> choose upgrade method 3 (No bother to try part 2, double click EVO7.1 Part 1 will do the tricks)
Note: Part 1 and Part 2 are the same file devided into two parts. The former is a self-decompressing file which associates the latter by itself)

4.Wait for 20 mins or so. (or you may like to check PdocWrite out in your PC for time's saving.)

5. 1st device configuration (the first time)

6.Hard-reset (type 1234 on Clear Storage, rather than hold two buttons + the tiny hole pricking, is strongly recommanded).

7. 2nd device configuration (the second time)

8. Start enjoying your "brand-new" device!

Very nice rom, thank you very much. Free storage and program memory is incredible.
It seems stable so far.

Just to help the ones who are afraid of following the steps above, I have uploaded an alternative version by mixing files with pdaviet's release.
You can now use the following steps (the ones we are already used to)

1- Install pdaviet_temp (then I disconnect the usb cord and do a hardreset just to feel better. I do this part in an XP under vmware server)
2- Connect the phone again, wait for activesync connection (several seconds), without touching anything run upgrade_rom.bat (I complete this part in vista with WMDC)
3- After receiving the lovely "finished" message remove the usb cable and hardreset

I reflashed my device just to check if it works (It does work :) )

There is something wrong in the original flashing method which specifies the ending offset as 0x3900000. it exceeds the size of the rom and it is the reason that you have to manually disconnect the usb cable after 20 minutes.
I cannot think of a good reason for specifying a greater size (Can someone explain if there is a reason?).
Without specifying the offset, pdocwrite chooses the correct one (i.e. the size of OS.nb)
By the way, I liked the ping trick in the script. I never thought of using ping to sleep for 4 seconds by specifying -w 4000 parameter :)

another thing is that, do not use paradis_pal's change pagepool method as the offset of the pagepool definition is different for this release.
you would not need it anyway as I think 6MB pp is ideal for most of us.

here is the link:
http://rapidshare.com/files/52065700/evo7en.7z.html

sorry for packing it with 7zip. my connection sucks so "size does matter".
You'll need a recent version of Winrar or 7zip (http://www.7-zip.org/) to unpack.
Thanks again to Youzii, Da9L and iiiox.

[Nut110]

I'm trying this ROM. First thing is disappointing of the missing Transcriber.
:(

As someone mentioned about more stable BT A2DP (sound glitch and quality) it interests me very much and I'm testing. I'm getting sick of the sound glitch no matter how I config the registry.

[martijnkooi]

please advice..

this is what I get..
It seems it cannot connect to /windows but it dus make a backup (nb file) :(

Â}®l«╔Âí: 22:39:10,20
*
* 818Pro WM6 ñ╔»┼Á{ªí (G3/G4 ┤╣ñ¨¥AÑ╬)
*
* ¿╠À˺A¬║CPU,ñ╔»┼ª@╗¦¼¨ 12-30 ñ└─┴.
*
extracted OS
Initializing...........End Time
22:40:02,98
*
* ñÔ¥¸º@À~¿t▓╬ñ╔»┼ÀÃ│ãññ
*
ñ╔»┼ññ ... ╣q©ú┤úÑ▄Á▓º¶½e¢ðñ┼®ÌñUUSB¢u...
*
* Â}®l«╔Âí:
22:40:02,98
*
* º@À~¿t▓╬ñ╔»┼: ¿╠À˺A¬║CPU,ª╣¿BãJª@╗¦¼¨ 9-20 ñ└─┴.
* ¢ðÁy¡È...
*
* ªp¬G30ñ└─┴½ßÁe¡▒ñ┤ÁMñú┼▄, ¢ð¬¢▒Á®ÌñUñÔ¥¸USB¢u,¿├¡½©mñÔ¥¸;
* │q▒`ñ╔»┼ñw©gº╣ª¿,ªpñ┤Ñ╝º╣ª¿,¢ðѲ¿Ûª¡ý¬®WM5ROM,ªA░§ ªµÑ╗Á{ªí.
*
ERROR: Unable to open WinCE file '\windows' - Geretourneerd door WSARecv of WSAR
ecvFrom om aan te geven dat een goede afsluitvolgorde van buitenaf is gestart.

* End Time
22:40:48,53
*
* ñwº╣ª¿! (ªp¬G¿Sª│Ѷª¾┐¨╗~░T«º.)
* WM6ñ╔»┼Á{ªíÁ▓º¶
*

[Da9L]

please advice..

this is what I get..
It seems it cannot connect to /windows but it dus make a backup (nb file) :(

Â}®l«╔Âí: 22:39:10,20
*
* 818Pro WM6 ñ╔»┼Á{ªí (G3/G4 ┤╣ñ¨¥AÑ╬)
*
* ¿╠À˺A¬║CPU,ñ╔»┼ª@╗¦¼¨ 12-30 ñ└─┴.
*
extracted OS
Initializing...........End Time
22:40:02,98
*
* ñÔ¥¸º@À~¿t▓╬ñ╔»┼ÀÃ│ãññ
*
ñ╔»┼ññ ... ╣q©ú┤úÑ▄Á▓º¶½e¢ðñ┼®ÌñUUSB¢u...
*
* Â}®l«╔Âí:
22:40:02,98
*
* º@À~¿t▓╬ñ╔»┼: ¿╠À˺A¬║CPU,ª╣¿BãJª@╗¦¼¨ 9-20 ñ└─┴.
* ¢ðÁy¡È...
*
* ªp¬G30ñ└─┴½ßÁe¡▒ñ┤ÁMñú┼▄, ¢ð¬¢▒Á®ÌñUñÔ¥¸USB¢u,¿├¡½©mñÔ¥¸;
* │q▒`ñ╔»┼ñw©gº╣ª¿,ªpñ┤Ñ╝º╣ª¿,¢ðѲ¿Ûª¡ý¬®WM5ROM,ªA░§ ªµÑ╗Á{ªí.
*
ERROR: Unable to open WinCE file '\windows' - Geretourneerd door WSARecv of WSAR
ecvFrom om aan te geven dat een goede afsluitvolgorde van buitenaf is gestart.

* End Time
22:40:48,53
*
* ñwº╣ª¿! (ªp¬G¿Sª│Ѷª¾┐¨╗~░T«º.)
* WM6ñ╔»┼Á{ªíÁ▓º¶
*

My advice would be that you delete the files you have downloaded and start over with the ones that i have provided.. They are like the old style flash of WM6 (taken from PDAViet's WM6 roms) and more easy to understand the output from.. Look for link in 1st post !

[iiiox]

is there a reason why there is so little program memory? I want to install other apps and fear may not run properly. already have SIP problem with gallum v6.

btw, is there a Simplified Chinese SIP built-in? Can I remove other languages eg Korean to have more memory?

Available programe memory here (28.5M in my case) is far more than common WM6 roms, say, 20M to 23M or so. ^^
More apps installation requires more avialable storage memory, which is why our memory cards for^^

And, yes, Chinese SIP is built-in. Actually simplified, troditional chinese and even Japanese etc, are all generated by the same font, (P)MingLiu (新細明體).

[iiiox]

anyone can help ? i want to remove the chinese and others except the english

As I know, only if we dump the rom, change the font and *.nls etc and cook it again can the system's font be changed properly^^" (not 100% sure)

[chuacy88]

Play with it 1 day and this rom is fast. However when I installed the HTC-Touch-home plug in, it become very cery slow. Any way to resolve this??

[iiiox]

Play with it 1 day and this rom is fast. However when I installed the HTC-Touch-home plug in, it become very cery slow. Any way to resolve this??
Me, too, waiting for Youzii's HTCHome and Cube cabs for EVO7en. Youzii had fixed the speed problem for EVO7tw a few days ago^^

[try]

Anyone manage to find the MMS programor setting?

[bojaniste]

I cant set up mu GPRS, there is no "Celular line(GPRS)" like in other windows versions...??? Please help

[Nut110]

I have the report especially for BT.
I have encountered the A2DP BT sound glitch from many WM6 ROMs.
It will happen when you turn off or disconnect BT and reconnect again.
I use iTech Clip Radio (stereo). Once I pair them together after the fresh sr both can work perfectly with hi quality sound and no glitch. However, when I plug-in the charger to iTech the device will automatically turn off and my Prophet will automatically disconnect the BT connection. Without SR Prophet, in the morning when I pair iTech again the sound glitch happen. I listen to the music with very low tone (flat) and the sound glitch. The rythm and lyric seems to be continuous but just the sound I can't listen to. So it's BT not WMP.

I try to unpair and pair them again, close WMP from the memory, do many things without success. I have to SR only. :(

And to listen to the music I have to SR everyday in the morning.

I experience this from every WM6 ROMs so far. Wished that this ROM would help but disappointed.
:(

[tb146]

Anyone manage to find the MMS programor setting?

I have the attached Network Wizard the older version.
For Indonesian area only :
- Satelindo
- Excel
- Telkomsel
- IM3

No "3" Setting Provider

[try]

I have the attached Network Wizard the older version.
For Indonesian area only :
- Satelindo
- Excel
- Telkomsel
- IM3

No "3" Setting Provider

No, you missunderstand me.
I have this also but what I mean is I cannot find any MMS program in the ROM.
Anyway I can install ArcSoft MMS, but it will reduce the storage availability in the ROM itself.

Cheers

[tb146]

No, you missunderstand me.
I have this also but what I mean is I cannot find any MMS program in the ROM.
Anyway I can install ArcSoft MMS, but it will reduce the storage availability in the ROM itself.

Cheers

I see, sorry for that.
you can download EVO MMS from here
http://cid-8231c261cbdd4326.skydrive.live.com/self.aspx/818EVO/%e9%a1%8d%e5%a4%96%e8%bb%9f%e9%ab%94/EVO%20MMS.cab
Install on your ROM PDA, it will reduces the RAM Availibility but plugin in to the WM6 just like others ROM

[kelvin k]

Me, too, waiting for Youzii's HTCHome and Cube cabs for EVO7en. Youzii had fixed the speed problem for EVO7tw a few days ago^^

I'm a total newbie in using PPC. I got my Dopod 830 from a lucky draw but I was planning to sell after few days of usage. Who want a bulky & unfriendly phone :p However, after I learn there are some incredible ROMs available to the public as EVO7, I was hook.

I spent more than 8 hours just to flash successfully for the first time. I'm a happy user of EVO7. Can't wait for Cube cabs :D

Last, thank you Youzii for his unselfish sharing. Of course, also other members than have done the same.

[tb146]

Just aware.

Be carefull with G4 SIP setting, i have crash my PDA because of wrong setting

[tb146]

already one day my PDA flashed with this ROM and found a minor bug at the font side.
The menu for setting text message was cutted, i think it is because the font size is to big, tried to solve using G4 SIP but not solved.
anyone can tell me how to solve it ?

[rjtd]

Are the fonts similiar to the ones on screenshots?

[iiiox]

already one day my PDA flashed with this ROM and found a minor bug at the font side.
The menu for setting text message was cutted, i think it is because the font size is to big, tried to solve using G4 SIP but not solved.
anyone can tell me how to solve it ?
This problem could be solved, as I know, by simply change the pagepool to 8M or 12M ^^
It takes only 1 second to do the trick with the great tool... (looking for it for you, wait a second@_@) "Paradis change pool size.zip" at http://forum.xda-developers.com/showthread.php?t=323538

[tb146]

Are the fonts similiar to the ones on screenshots?

Yes it is using tahoma as default but seems the font registry was devided in two section :
- First can be change by the G4 SIP application
- 2nd cannot be change by the G4 SIP application

I tried to change some value into System Font, Menubar Font and pop-up menu font but some visible fonts won't change. I think this is because the Chinese character on it so the value cannot be change otherwise the chinese character won't visible.

Also tried to search it in the Registry but not lucky.

Hope the Cooker can release a new ROM with fully WWE edition without Chinese character on it, so the memory can be increased.

But after all, this ROM is next to perfect.
- It runs fast and stable
- Wifi and BT works fine
- No Network Wizard as default
- Font still has problem
- Battery life is the same with Gullum V6 and Nanoscopic but worst then PDAVIET Cross 5b.

Hope somebody can cook another ROM based on this ROM.

Cheers

[gullum]

Yes it is using tahoma as default but seems the font registry was devided in two section :
- First can be change by the G4 SIP application
- 2nd cannot be change by the G4 SIP application

I tried to change some value into System Font, Menubar Font and pop-up menu font but some visible fonts won't change. I think this is because the Chinese character on it so the value cannot be change otherwise the chinese character won't visible.

Also tried to search it in the Registry but not lucky.

Hope the Cooker can release a new ROM with fully WWE edition without Chinese character on it, so the memory can be increased.

But after all, this ROM is next to perfect.
- It runs fast and stable
- Wifi and BT works fine
- No Network Wizard as default
- Font still has problem
- Battery life is the same with Gullum V6 and Nanoscopic but worst then PDAVIET Cross 5b.

Hope somebody can cook another ROM based on this ROM.

Cheers

I've tried to dump it and there are no rgu files so it's hard to use anything from it to coock a new rom

[tb146]

I've tried to dump it and there are no rgu files so it's hard to use anything from it to coock a new rom

Thanks Gullum for your best effort.
I hope you can release V7 based on the 18125 soon. i hardly wait your ROM.
Just a suggestion for V7, hope you can put the battery driver from PDAVIET 5b and take a part the cube and home plugins so the memory can be increased.

Thank you Gullum.

[gullum]

Thanks Gullum for your best effort.
I hope you can release V7 based on the 18125 soon. i hardly wait your ROM.
Just a suggestion for V7, hope you can put the battery driver from PDAVIET 5b and take a part the cube and home plugins so the memory can be increased.

Thank you Gullum.

no I'm not gonna take the battery driver from PDAVIET 5b :D hma4 and I have started working together and have got the original WM5 battdriver working .... so no more battfix :)

[tb146]

no I'm not gonna take the battery driver from PDAVIET 5b :D hma4 and I have started working together and have got the original WM5 battdriver working .... so no more battfix :)

Nice to heard it.... Great Job...
Waiting your V7, when you release this version ?
Can i have your beta version 7 link so i can download it ?

[youzii]

Hello everyone,here comes some ext software for EVO7en:D

EVO ExtFont.cab：support the Middle East character(like Thailand words)。
EVO HtcUIHomeEn.cab：HTC UI Home(default install dir is \HTCUI)
EVO TouchCubeEn.cab：TouchCube(default install dir is \windows\FLO)

please check 【EVO7en】 (http://cid-8231c261cbdd4326.skydrive.live.com/browse.aspx/818EVO/EVO7en) to download them:)

I think they also work on Nanoscopic V1

[iiiox]

Hello everyone,here comes some ext software for EVO7en:D

EVO ExtFont.cab：support the Middle East character(like Thailand words)。
EVO HtcUIHomeEn.cab：HTC UI Home(default install dir is \HTCUI)
EVO TouchCubeEn.cab：TouchCube(default install dir is \windows\FLO)

please check 【EVO7en】 (http://cid-8231c261cbdd4326.skydrive.live.com/browse.aspx/818EVO/EVO7en) to download them:)

Haha!!! Thank you so very much!!! Youzii!!! The long-waited Cube and HTCHome cabs are finally realized!!!!

BTW, 4 posts eh? I thougt you were yet to visit XDA...haha!

[iiiox]

X-button, thanks to the freelancer contributing it, seems to take to built-18125 better than pBar 1.4 with the respect of available program memory. (my case is that there are always 20M or so left no matter how long the device runs. The outcome, however, requires longer period to test it out!^^"
Note: X-button 1.51 can be downloaded on the fourth post of this thread.

[bojaniste]

Right after instaling the cube and htc home, i cant boot up my phone... it stops at the "windows mobile evo7" screen... anything else that hardreset???

[cesardeluxe]

Right after instaling the cube and htc home, i cant boot up my phone... it stops at the "windows mobile evo7" screen... anything else that hardreset???

You should have installed safemode. This software rocks
HERE IT IS (http://forum.ppcwarez.org/viewtopic.php?f=49&t=14748&hilit=safemode)

greets

[ccc030]

that cant be a problem of htc home plugin. i installed the kaiser's plugin and it works fine. cube i dont know, i wont use it.

i must said great job that rom, very fast, stable, impressive.



Right after instaling the cube and htc home, i cant boot up my phone... it stops at the "windows mobile evo7" screen... anything else that hardreset???


Right after instaling the cube and htc home, i cant boot up my phone... it stops at the "windows mobile evo7" screen... anything else that hardreset???

[ccc030]

i made a try again and installed the htc plugin postet in this thread. my device became slow, you r right.

i turned back to the kaiser's htc home plugin [use the search to find it here on the forum]. it works very very good, doesnt slow down the prophet.

Play with it 1 day and this rom is fast. However when I installed the HTC-Touch-home plug in, it become very cery slow. Any way to resolve this??

[try]

I see, sorry for that.
you can download EVO MMS from here
http://cid-8231c261cbdd4326.skydrive.live.com/self.aspx/818EVO/%e9%a1%8d%e5%a4%96%e8%bb%9f%e9%ab%94/EVO%20MMS.cab
Install on your ROM PDA, it will reduces the RAM Availibility but plugin in to the WM6 just like others ROM

What versionis that MMS? 4.2.x or 4.0 or 3.5?

[youzii]

What versionis that MMS? 4.2.x or 4.0 or 3.5?
4.0.31.21:p

[try]

Nevermind,
Just found out it ArcsoftMMS 4.0.31.21

[pego2007]

Hi

After i install the cube.cab, the htc-home- and the font.cab where can i found or change them ?(which buttons needed ?)

greetings

pego2007

[shahanovski]

Hi.. It's my first time upgrading the ROM. I did flash my i-mate JAMin with the Step1 RUU but when I activate the Upgrade_ROM.bat from the Step2 folder it says it can't execute.. the update is just not working... should I run the update while the PDA is working normally or should it be in a different mode?

[tb146]

Hi.. It's my first time upgrading the ROM. I did flash my i-mate JAMin with the Step1 RUU but when I activate the Upgrade_ROM.bat from the Step2 folder it says it can't execute.. the update is just not working... should I run the update while the PDA is working normally or should it be in a different mode?

Hi there,

Did you read the fourth thread ?
After u flash with step1 . you run step 2 by choosing upgrade.bat not Upgrade_rom.bat.
After you launch upgrade.bat, choose option 3 to flash your PDA.

your error because of the 80040000-OS.nb not already generated, it will be generated by upgrade.bat with option 3 (if you have run the step1).

[chuacy88]

Hello everyone,here comes some ext software for EVO7en:D

EVO ExtFont.cab：support the Middle East character(like Thailand words)。
EVO HtcUIHomeEn.cab：HTC UI Home(default install dir is \HTCUI)
EVO TouchCubeEn.cab：TouchCube(default install dir is \windows\FLO)

please check 【EVO7en】 (http://cid-8231c261cbdd4326.skydrive.live.com/browse.aspx/818EVO/EVO7en) to download them:)

I think they also work on Nanoscopic V1
After install the EVO HtcUIHomeEn.cab; the speed only slow down a bit. work for me!!

Thks!!

[maartin]

Hi there,

Did you read the fourth thread ?
After u flash with step1 . you run step 2 by choosing upgrade.bat not Upgrade_rom.bat.
After you launch upgrade.bat, choose option 3 to flash your PDA.

your error because of the 80040000-OS.nb not already generated, it will be generated by upgrade.bat with option 3 (if you have run the step1).

Ok, at risk of sounding like an idiot, I have tried searching etc but no where can I find PVTEMP to download so that I can flash it. Can you perhaps provide me a link?

Right after a long time of reading pages and pages here is a link for those that can't find it
http://tom-love.net/Rom/Prophet/WM6.0/Prophet_PV_Temp.zip

[ufriendxda]

i made a try again and installed the htc plugin postet in this thread. my device became slow, you r right.

i turned back to the kaiser's htc home plugin [use the search to find it here on the forum]. it works very very good, doesnt slow down the prophet.

Hi! I've searched but not found it. Could you please post the link?
Thx!

[SeaPea]

Tested time : 11 hours
Result :
- slow
- freeze (4-5 times) :mad:
- wifi working
- msn working

Installed apps: spb diary, spb weather

Back to PDAVIET touch v6 :)

I beg to disagree.

Result: Tested time 30 hours
- fastest of all
- freeze (2 times) :tolerable: only occurred when an SMS sent out crashed with an incoming call
- wifi working
- msn working
- support Chinese fonts in here so I can dump the CE-Star which slows down things dramatically previously

Installed apps: Spb Diary, Mobile Shell, Phone Suite

The only thing I have lost is that the keyboard does not carry the previous English keyboards with Word Pick shortcut. Just wonder if I can change the keyboard altogether, anybody offers me a hint?

[fungsaikit]

I have the report especially for BT.
I have encountered the A2DP BT sound glitch from many WM6 ROMs.
It will happen when you turn off or disconnect BT and reconnect again.
I use iTech Clip Radio (stereo). Once I pair them together after the fresh sr both can work perfectly with hi quality sound and no glitch. However, when I plug-in the charger to iTech the device will automatically turn off and my Prophet will automatically disconnect the BT connection. Without SR Prophet, in the morning when I pair iTech again the sound glitch happen. I listen to the music with very low tone (flat) and the sound glitch. The rythm and lyric seems to be continuous but just the sound I can't listen to. So it's BT not WMP.

I try to unpair and pair them again, close WMP from the memory, do many things without success. I have to SR only. :(

And to listen to the music I have to SR everyday in the morning.

I experience this from every WM6 ROMs so far. Wished that this ROM would help but disappointed.
:(

Hi there,
For glitch, do you mean the sound skipping? If yes, you may try the followings:

1. Install the task manager;
2. Run the task manager before you run your music player;

The skipping issue should disappear.

[bugsywabbit]

I have tried the Gallum V6 and PDAViet 4.0.0.6 Touch and finally this ROM.
I must say that this is the best ROM for me in terms of performance and stability.

I have previously installed
SPB Mobile Shell, SPB Phone Suite, PocketBreeze, SPB Time and TouchPad on all three versions (included CEStar for the above except for this ROM)

I noticed that only the EVO ROM allowed me to use the Touchpad without any problems with the above software enabled on my today.

Another plus point is that when I use the Wireless Bluetooth headset, only this ROM does not give me the hissing sound.

Only drawback is the the screen seems to be too sensitive, sometimes multiple actions may be done. Also, the WIFI occasionally switches on by itself.

May I request a Chinese Touchpad input? This would complete the package.

Good work!! :)

[iiiox]

I have tried the Gallum V6 and PDAViet 4.0.0.6 Touch and finally this ROM.
I must say that this is the best ROM for me in terms of performance and stability.

I have previously installed
SPB Mobile Shell, SPB Phone Suite, PocketBreeze, SPB Time and TouchPad on all three versions (included CEStar for the above except for this ROM)

I noticed that only the EVO ROM allowed me to use the Touchpad without any problems with the above software enabled on my today.

Another plus point is that when I use the Wireless Bluetooth headset, only this ROM does not give me the hissing sound.

Only drawback is the the screen seems to be too sensitive, sometimes multiple actions may be done. Also, the WIFI occasionally switches on by itself.

May I request a Chinese Touchpad input? This would complete the package.

Good work!! :)

The sensitivity of touch screen can be modified, please check the fourth post of this string again^^.

Troditional Chinese can be added by dumping all fiils of Original IM(原生輸入法) into the Windows folder and import the registry file Phonim(注音輸入法).
If you preper Chajeiim (倉頡輸入法) or Mboxcht (手寫板), please dump the additional *.dll files into Windows, and import All_Chtim.reg instead. You'll get all three input methods at once.
For Simplified Chinese users, please install either Ce-star or Monster, or wait for other Comrades to upload the IMs absracted from devices built in simplified Chinese..

[bull_do3er]

I must say this is the fastest rom i have used so far.

report
1. very fast
2. program memory stable and no issues running a lot of apps
3. i did a hard reset using stylus and the battery drain from wifi has significantly reduced. (need others to confirm)

Just 1 request, i could not get bt voice command to work. I've already made the following registry change but it still doesnt work.
HKEY_LOCAL_MACHINE\Software\OEM\VoiceCommand Path = "\Program Files\Voice Command\VoiceCmd.exe

This issue does not exist with PDAviet and Gullum roms.

Please help and this will make this the ultimate rom for me! :) :)

[iiiox]

I must say this is the fastest rom i have used so far.

report
1. very fast
2. program memory stable and no issues running a lot of apps
3. i did a hard reset using stylus and the battery drain from wifi has significantly reduced. (need others to confirm)

Just 1 request, i could not get bt voice command to work. I've already made the following registry change but it still doesnt work.
HKEY_LOCAL_MACHINE\Software\OEM\VoiceCommand Path = "\Program Files\Voice Command\VoiceCmd.exe

This issue does not exist with PDAviet and Gullum roms.

Please help and this will make this the ultimate rom for me! :) :)
Download Trinity's voice commander. Find it and install it, good luck!

[Nut110]

Hi there,
For glitch, do you mean the sound skipping? If yes, you may try the followings:

1. Install the task manager;
2. Run the task manager before you run your music player;

The skipping issue should disappear.

Dear fungsaikit
Yes I meant that.
I will try but I'm not sure it would help because Fantastic b4 and b5 both have Task Manager installed but the sound skipping still happen. Note here again that it happen when I make something that causes Prophet and iTech disconnected; i.e. charge iTech and it is automatically turn-off, when iTech move far away from Prophet, etc. When I pair them again then sound skipping happens. SR only.

[bull_do3er]

Download Trinity's voice commander. Find it and install it, good luck!

Hello iiiox,

is this the cab file you are referring to?

http://forum.xda-developers.com/showthread.php?t=308247&highlight=Voice+Command

I tried it but it does not work. :(

If not can you point me in the right direction?

Thanks

[iiiox]

Hello iiiox,

is this the cab file you are referring to?

http://forum.xda-developers.com/showthread.php?t=308247&highlight=Voice+Command

I tried it but it does not work. :(

If not can you point me in the right direction?

Thanks

Well, mine is Voice commander V2 built in Trinity, different from the file on the page of the link.... Other than too big to upload here, it's a Troditional Chinese version which may not suit for you... My suggestion for you is either find Voice Comander V2 on the net, or wait for, if possible, Youzii to release a cab for EVO7en similar to the one he put on his share folder for EVO7tw^^"

[bugsywabbit]

The sensitivity of touch screen can be modified, please check the fourth post of this string again^^.

Troditional Chinese can be added by dumping all fiils of Original IM(原生輸入法) into the Windows folder and import the registry file Phonim(注音輸入法).
If you preper Chajeiim (倉頡輸入法) or Mboxcht (手寫板), please dump the additional *.dll files into Windows, and import All_Chtim.reg instead. You'll get all three input methods at once.
For Simplified Chinese users, please install either Ce-star or Monster, or wait for other Comrades to upload the IMs absracted from devices built in simplified Chinese..

Thanks! I think maybe this useful piece of information should be added to your post on the first page with all your tips for the benefit of all!
-------------------------------------------------------
Original IM(原生輸入法) Installation:

1. Copy all files OriginalIM.zip into the Windows folder
2. Import the registry file PhonIM.zip(注音輸入法).

Chajeiim (倉頡輸入法) or Mboxcht (手寫板)
1. Copy the AdditionalDll.zip files into Windows
2. Import All_Chtim.reg instead.
You'll get all three input methods at once.
-------------------------------------------------------

Just wishing for someone with the IMs for Simplified Chinese...

[iiiox]

Thanks! I think maybe this useful piece of information should be added to your post on the first page with all your tips for the benefit of all!
-------------------------------------------------------
Original IM(原生輸入法) Installation:

1. Copy all files OriginalIM.zip into the Windows folder
2. Import the registry file PhonIM.zip(注音輸入法).

Chajeiim (倉頡輸入法) or Mboxcht (手寫板)
1. Copy the AdditionalDll.zip files into Windows
2. Import All_Chtim.reg instead.
You'll get all three input methods at once.
-------------------------------------------------------

Just wishing for someone with the IMs for Simplified Chinese...
Thanks a lot for the reminder!! It's done^^

[CameoTabby]

13. Original IM (原生輸入法) installation:
Copy all files OriginalIM.zip into the Windows folder
Import the registry file PhonIM.zip (注音輸入法).

Chajeiim (倉頡輸入法) and Mboxcht (手寫板輸入法) installation:
Copy the AdditionalDll.zip files into Windows
Import All_Chtim.reg instead.
You'll get all three input methods at once.


I don't know much about 注音輸入 and 倉頡輸入, so there are pretty much usless for me.

Please advise what if I only need Mboxcht (手寫板輸入法). What file(s) do I need? And how should I modify the two registry files you provided.

[iiiox]

I don't know much about 注音輸入 and 倉頡輸入, so there are pretty much usless for me.

Please advise what if I only need Mboxcht (手寫板輸入法). What file(s) do I need? And how should I modify the two registry files you provided.

Here you are!

Delete Chajei and Phonim values, and, from the files attached earlier, delete all the *.dlls no longer needed within the two sets of keys.

Please pay attention that "hwxcht.dll", a big guy here, 1.26M, can be deleted in the case of Phonim. You may fullow suit and see if it works for Mboxcht.

-----------------------------------------------------------------------
Windows Registry Editor Version 5.00

[HKEY_CURRENT_USER\Control Panel\Input Method]

[HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys]

[HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys\00000072]
"Ime"=dword:e0010404
"KM"=dword:0000c002
"VK"=dword:000000be

[HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys\00000071]
"Ime"=dword:e0010404
"KM"=dword:0000c004
"VK"=dword:00000020

[HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys\00000070]
"Ime"=dword:e0010404
"KM"=dword:0000c002
"VK"=dword:00000020

[HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys\00000101]
"Ime"=dword:e0020404
"KM"=dword:0000c002
"VK"=dword:0000007b

[HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys\00000100]
"Ime"=dword:e0010404
"KM"=dword:0000c002
"VK"=dword:0000007a

[HKEY_CURRENT_USER\keyboard layout]

[HKEY_CURRENT_USER\keyboard layout\Preload]
@="e0010404"

[HKEY_CURRENT_USER\keyboard layout\Preload\2]
@="e0020404"

[HKEY_CURRENT_USER\keyboard layout\Preload\1]
@="e0010404"

[HKEY_CURRENT_USER\keyboard layout\toggle]
"Hotkey"="1"

[HKEY_CLASSES_ROOT\CLSID\{124D7CDC-CF2D-418F-8BB4-4395AD048B79}]
"TimeOut"=dword:00000001
@="手寫板"

[HKEY_CLASSES_ROOT\CLSID\{124D7CDC-CF2D-418F-8BB4-4395AD048B79}\DefaultIcon]
@="mboxcht.dll,0"

[HKEY_CLASSES_ROOT\CLSID\{124D7CDC-CF2D-418F-8BB4-4395AD048B79}\IsSIPInputMethod]
@="1"

[HKEY_CLASSES_ROOT\CLSID\{124D7CDC-CF2D-418F-8BB4-4395AD048B79}\InprocServer32]
@="mboxcht.dll"

[HKEY_CLASSES_ROOT\CLSID\{E18BFD44-DF36-11D1-90DD-0000F81E0CE9}]
@="倉頡"

[HKEY_CLASSES_ROOT\CLSID\{E18BFD44-DF36-11D1-90DD-0000F81E0CE9}\DefaultIcon]
@="chajeiim.dll,0"

[HKEY_CLASSES_ROOT\CLSID\{E18BFD44-DF36-11D1-90DD-0000F81E0CE9}\IsSIPInputMethod]
@="0"

[HKEY_CLASSES_ROOT\CLSID\{E18BFD44-DF36-11D1-90DD-0000F81E0CE9}\InprocServer32]
@="chajeiim.dll"

[HKEY_CLASSES_ROOT\CLSID\{E18BFD41-BEB8-11D1-8F9F-00AA00B58D45}]
@="注音"

[HKEY_CLASSES_ROOT\CLSID\{E18BFD41-BEB8-11D1-8F9F-00AA00B58D45}\DefaultIcon]
@="phonim.dll,0"

[HKEY_CLASSES_ROOT\CLSID\{E18BFD41-BEB8-11D1-8F9F-00AA00B58D45}\IsSIPInputMethod]
@="1"

[HKEY_CLASSES_ROOT\CLSID\{E18BFD41-BEB8-11D1-8F9F-00AA00B58D45}\InprocServer32]
@="phonim.dll"

[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Contro l\Layouts]

[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Contro l\Layouts\e0020404]
"Keyboard Layout"="00000409"
"UI Module"="msimeuic.dll"
"Ime File"="msimecj.dll"
"Layout Text"="Microsoft Chajei IME"

[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Contro l\Layouts\e0010404]
"Keyboard Layout"="00000409"
"UI Module"="msimeuic.dll"
"Ime File"="msimeph.dll"
"Layout Text"="Microsoft Phonetic IME"

[HKEY_CURRENT_USER\ControlPanel\Chinese IME UI\Settings]
"ShowState"=dword:00000000

[kelvin k]

After four days of testing, I must say I like this ROM very much despite my very limited experience with PPC :D

I have two questions that need help, pls:


7. The clock on the upper menu bar can be changed to the battery icon by editing the value of registry as below:
[HKEY_LOCAL_MACHINE\Software\Microsoft\Shell] "ShowTitleBarClock"=dword:0 >> battery display (1 = clock display)

I change the value to "0" but the clock in Task bar still displays time instead of battery. And I've reconfirmed the value & even performed soft reset but it did not help. :confused:

Another problem I encounterred is both Email & SMS/MMS button in Cube do not work. After I touch the icon (either one), it will only show the task bar without doing anything else (no hault on system nevertheless). The rest of four programs work fine.

Pls advise. Thanks.

[tb146]

After four days of testing, I must say I like this ROM very much despite my very limited experience with PPC :D

I have two questions that need help, pls:



I change the value to "0" but the clock in Task bar still displays time instead of battery. And I've reconfirmed the value & even performed soft reset but it did not help. :confused:

Another problem I encounterred is both Email & SMS/MMS button in Cube do not work. After I touch the icon (either one), it will only show the task bar without doing anything else (no hault on system nevertheless). The rest of four programs work fine.

Pls advise. Thanks.


your battery indicator only will show when you are in today screen,if you want to show battery all the time in application windows, try to change from clock & alarm setting then uncheck the option in the "more" tab.

for number 2, manage the link using HTC costum and pointed the sms picture to message

[kelvin k]

your battery indicator only will show when you are in today screen,if you want to show battery all the time in application windows, try to change from clock & alarm setting then uncheck the option in the "more" tab.

for number 2, manage the link using HTC costum and pointed the sms picture to message

The battery icon show up already :) Thanks.

Sorry, where can I find HTC costum?

Thanks for your reponse :)

[tb146]

The battery icon show up already :) Thanks.

Sorry, where can I find HTC costum?

Thanks for your reponse :)

Here is the HTC Custom but i am not guarantee it will work on your pda version, just try it

[mrheat]

i have a little problem with arcsoft mms after installing the evomms cab....

it sends and downloads mms ok, but i cant view them!

but when i click "New MMS" the editor appears for a second then closes, and i have an empty mms in "Drafts"...

any ideas? is the cab for cht lang?

[tb146]

i have a little problem with arcsoft mms after installing the evomms cab....

it sends and downloads mms ok, but i cant view them!

but when i click "New MMS" the editor appears for a second then closes, and i have an empty mms in "Drafts"...

any ideas? is the cab for cht lang?

This problem is because of the EVO mms, i tried only using EVO mms without Arcsoft. The problem still there. so the best setting is do not install the EVO mms because it still have bug.
I just use ArcSoftMMS_4.0.31.23 and MMS messaging is running well.

[yoshitoshi]

anyone here got the cab file for network wizard 1.0?

[kelvin k]

Here is the HTC Custom but i am not guarantee it will work on your pda version, just try it

It seem to run in my dopod 830 but how exactly I link Email & SMS/MMS to the teo icons? Thanks again. :)

[tb146]

It seem to run in my dopod 830 but how exactly I link Email & SMS/MMS to the teo icons? Thanks again. :)

Point the SMS/email icon in the HTC custom and put the message link (\windows\message.lnk) in to it.

[kelvin k]

Point the SMS/email icon in the HTC custom and put the message link (\windows\message.lnk) in to it.

I am afraid I did not get you. I run HTCustom v1.2 but could not see anything that allow me to do as you said :( . Perhaps I misunderstood you. Pls elaborate. Thanks a lot!

[hercule18]

Hi,

Great Rom,

Everything work but one thing, I did not found where to setup MMS.
When i go in Messaging there is nothing about it.

Please help

Bye

Herc.

[digifan]

it's a good rom
but i don't like the font mingliu , i like microsoft yahei ,
and also the menu font , i like blod!

[kelvin k]

13. Original IM (原生輸入法) installation:
Copy all files OriginalIM.zip into the Windows folder
Import the registry file PhonIM.zip (注音輸入法).

Chajeiim (倉頡輸入法) and Mboxcht (手寫板輸入法) installation:
Copy the AdditionalDll.zip files into Windows
Import All_Chtim.reg instead.
You'll get all three input methods at once.

I followed above instruction and now I cannot use keyboard to key in Capital letter of alphabet. In normal case, locking CAP key suppose to output capital letter but it is actually output small capital letter. :confused:

Without locking CAP key, Chinese character will pop up for every key I press. I have no way to key in capital letter now. :(

Pls advice what can I do to resolve this. If there is no work around, how can I revert back to prevous stage before following the above instruction?

[iiiox]

I followed above instruction and now I cannot use keyboard to key in Capital letter of alphabet. In normal case, locking CAP key suppose to output capital letter but it is actually output small capital letter. :confused:

Without locking CAP key, Chinese character will pop up for every key I press. I have no way to key in capital letter now. :(

Pls advice what can I do to resolve this. If there is no work around, how can I revert back to prevous stage before following the above instruction?

Two ways:
1. restore your backup file (hopefully you've done it earlier)
2. delete all the related files from Windows, and delete the new added keys as well.
Good luck!
Note: No capital issue in my case. The real problem is that once the PhonimIM is built, the auto-completion of English IM crashes.

[iiiox]

it's a good rom
but i don't like the font mingliu , i like microsoft yahei ,
and also the menu font , i like blod!
haha!! Yahei, as I mentioned at X-beta earlier, is just something like The Empress Yang Kuei-Fei, cute yet, not only chubby, fat while Mingliu is slim and graceful^^"

Copy Yahei from your PC to PPC and assign it as the system font with G4 SIP(download the new one on the fourth post of this thread) on the setting page to get what you want if you don't even worry about an upcoming obses^^

For English readers who wants badly to annihilate the Mingliu font despite the incredible available memories and rapidity of Evo7en, replacing the Minglue font with a lovable font you prefer to in the same file name will do the trick once and for all. (Back up your system first is always recommanded^^")

Change system fonts in 1 min >> http://www.mobile01.com/topicdetail.php?f=224&t=388171&p=2#3470667

[kelvin k]

Two ways:
1. restore your backup file (hopefully you've done it earlier)
2. delete all the related files from Windows, and delete the new added keys as well.
Good luck!
Note: No capital issue in my case. The real problem is that once the PhonimIM is built, the auto-completion of English IM crashes.

Option 1 is out :(

I deleted related files in Windows. This solve half the problem. The remain issue is I cannot get Capital letter in keyboard mode. :mad: I guess I have to live with box recognation.

[iiiox]

Option 1 is out :(

I deleted related files in Windows. This solve half the problem. The remain issue is I cannot get Capital letter in keyboard mode. :mad: I guess I have to live with box recognation.
seems like your system behaves a little bit kinky....not sure if you'd done the MUST, hard-reset, after flashing your device at the first place...my idea is why don't you 1234 to see anything different from the scratch??
Note: having tried to build the Chinese IMs for countless times for the word-suggestion problem, in vain so far, I never encountered the capital problem...

[kelvin k]

seems like your system behaves a little bit kinky....not sure if you'd done the MUST, hard-reset, after flashing your device at the first place...my idea is why don't you 1234 to see anything different from the scratch??
Note: having tried to build the Chinese IMs for countless times for the word-suggestion problem, in vain so far, I never encountered the capital problem...

OK, it is one of those day. I restart my dopod for second time today & the CAP key is working fine. Phewwww :eek:

BTW, I could not get SMS/MMS & Email icons to work in Cube. After pressing the icon, the title bar pops up but no further action seen. The system is still running (no hault) though.

tb146 said I should links them but I don't know how to do that. Pls advise. Thanks a million.

[iiiox]

OK, it is one of those day. I restart my dopod for second time today & the CAP key is working fine. Phewwww :eek:

BTW, I could not get SMS/MMS & Email icons to work in Cube. After pressing the icon, the title bar pops up but no further action seen. The system is still running (no hault) though.

tb146 said I should links them but I don't know how to do that. Pls advise. Thanks a million.
Well, the Cube Youzii provides neither works totally right in my case. And... to get it round is troublesome. Two options, again, for you to fix it though:
1. install Nanoscopic's remvable Cube instead. (works perfectly, but prepare to bat your baby blue from now on...cccc)
2. reassign all pngs, applications, and params manually with Touch_Settings. (time comsuming...-_-and a mistake notification will pop out at the first time you run Touch_Settings to modify the Evo7en Cube.)

For further information, please visit: http://www.mobile01.com/topicdetail.php?f=224&t=381442&p=1#3385060

[ravin]

Hello, how do you know if your s200 is chip G4 or G3?

[tb146]

Hello, how do you know if your s200 is chip G4 or G3?

Try to search the prophet wiki, it has been asked and answer many times.

[kelvin k]

2. reassign all pngs, applications, and params manually with Touch_Settings. (time comsuming...-_-and a mistake notification will pop out at the first time you run Touch_Settings to modify the Evo7en Cube.)

For further information, please visit: http://www.mobile01.com/topicdetail.php?f=224&t=381442&p=1#3385060

Tried that but error msg "Picture Path is empty" when save then Touch_Settings exits automatically & all thing done previously gone. :mad:

[iiiox]

Tried that but error msg "Picture Path is empty" when save then Touch_Settings exits automatically & all thing done previously gone. :mad:

UPDATED!!!!
WARNING: DO NOT FOLLOW STEPS BELOW, IT CAUSES QUICKDIAL MULFUNCTIONAL!

OK, solve the problem once and for all as steps as below:
1. reinstall EVO TouchCubeEn.cab
2. move all files in the FLO folder to the Windows folder
3. import the attached registry

What you get after the steps are done:
1. Email and SMS/MMS problems fixed
2. the missing "pressed" icons fixed
3. the incompatibility with Touch Settings fixed.

[2241Alexanders]

Yesterday I installed the EVO7 rom.
It works very good, fast and stable up to now, so many thanks.

After installing "my" apps the touch scrolling works no more.
I installed:
==> WM5 newmenu by Saman
==> Launcher by Scott Seligman
==> SK tools
==> SBSH Pockebreeze
==> SBSH Pocketweather
==> TCPMP
==> Neotab by Inteks (I suspect this utility, one of its functions is to redefine the volume-slider as a scrollwheel)
==> Devicelock by mr-2power (some suspicion)
==> Total commander

I suspect Neotab, but soft reset after removing Neotab makes no difference.
I will try hard-reset and reinstallation, but first:
==> Maybe somebody has the same experience and found out the reason?
==> Is it possible to reinstall/activate touch scrolling without HR?

[kelvin k]

UPDATED!!!!
WARNING: DO NOT FOLLOW STEPS BELOW, IT CAUSES QUICKDIAL MULFUNCTIONAL!



This make a newbie like me really worry :D

[tb146]

Yesterday I installed the EVO7 rom.
It works very good, fast and stable up to now, so many thanks.

After installing "my" apps the touch scrolling works no more.
I installed:
==> WM5 newmenu by Saman
==> Launcher by Scott Seligman
==> SK tools
==> SBSH Pockebreeze
==> SBSH Pocketweather
==> TCPMP
==> Neotab by Inteks (I suspect this utility, one of its functions is to redefine the volume-slider as a scrollwheel)
==> Devicelock by mr-2power (some suspicion)
==> Total commander

I suspect Neotab, but soft reset after removing Neotab makes no difference.
I will try hard-reset and reinstallation, but first:
==> Maybe somebody has the same experience and found out the reason?
==> Is it possible to reinstall/activate touch scrolling without HR?

I think the best idea to solve this problem is hard reset the phone than install the application one by one then try the touch flo, so you can know which application doesn't compatible or disturb the touch flo function.

[vmurali]

I cannot backup my data from PIM backup which I hv created using 5b. Any idea to overcome this problem?

[tb146]

I cannot backup my data from PIM backup which I hv created using 5b. Any idea to overcome this problem?

Sometimes it happens because not all WM6 for prophet have the same WM6 ROM base.
The best thing to backup your PIM is using active sync.

[2241Alexanders]

Got it!

Yesterday I reported the loss of touch scrolling.
After several hard resets and step by step reïnstallation + soft reset of applications I found out that changing the vertical scroll bar width (default = 13) is the cause. The scroll bar is quite useless with touch scrolling, so I changed the width to 2). Resetting to 11 or above brings touch scrolling back to life.

It would be nice to have smaller scrollbars, but with bothe Neotab and SKtools the altering of it finishes touch scrolling.

Anyway nice to have touch scrolling back to life.

[kenhuat]

Thank you so much in the behalf of Youzii^^"
The links has been added to the fourth post of this thread, thx again!

any other links, pls. can't download. thanks

[iiiox]

any other links, pls. can't download. thanks

hi, try here again, EVO7.2en (built 18508) >> http://cid-8231c261cbdd4326.skydrive.live.com/browse.aspx/818EVO/EVO7en

[tb146]

hi, try here again, EVO7.2en (built 18508) >> http://cid-8231c261cbdd4326.skydrive.live.com/browse.aspx/818EVO/EVO7en

Hi iiiox,

Can you make a new thread then preview this version ?
I have some little bug with the earlier version (EVO7en), when the first run, the calendar setting still shown the chinese character on it and also some menu in the settings was chop because the character is bigger than the menu.

Thanks

[iiiox]

Hi iiiox,

Can you make a new thread then preview this version ?
I have some little bug with the earlier version (EVO7en), when the first run, the calendar setting still shown the chinese character on it and also some menu in the settings was chop because the character is bigger than the menu.

Thanks

EVO7.2en (actually EVO8en) is still on the beta stage. Everyone is, of course, welcomed to test it before the official release. And I believe anyone will be welcomed to post the rom here after Youzii releases the final^^"

[iiiox]

Hi iiiox,

Can you make a new thread then preview this version ?
I have some little bug with the earlier version (EVO7en), when the first run, the calendar setting still shown the chinese character on it and also some menu in the settings was chop because the character is bigger than the menu.

Thanks
1. Chinese shown on Calendar can be sloved simply by setting regional settings to your country^^"

2. The letters chopped on the setting pages can be sloved by editing the registry as below:

[HKEY_LOCAL_MACHINE\nls]
"SystemLCID"=dword:404 << change dword from 404 to 409

Note: The side effect is that the sentence doesn't break properly on Chinese pages with PIE, so the method above is only suitable for non-Chinese users (or seldom browsing Chinese pages).

Thanks Youzii for providing the settings^^

[iiiox]

Users who are not good at modifying registry please install EVO ENGfix.cab to fix the letter-chopping problem on some setting pages.

For whom who like to have the setting pages for HTCHome, please install EVO HTCHomeSettings.cab.

[tb146]

1. Chinese shown on Calendar can be sloved simply by setting regional settings to your country^^"

2. The letters chopped on the setting pages can be sloved by editing the registry as below:

[HKEY_LOCAL_MACHINE\nls]
"SystemLCID"=dword:404 << change dword from 404 to 409

Note: The side effect is that the sentence doesn't break properly on Chinese pages with PIE, so the method above is only suitable for non-Chinese users (or seldom browsing Chinese pages).

Thanks Youzii for providing the settings^^

Hi iiiox,

Thanks for your help, regarding the chinese character. it shown after the hard reset,there is screen calibration and time setting for the first time use. so the chinese character still shown even i have change the regional setting because it only shown after the hard reset only.

Please Advise,

[kelvin k]

BTW, does this ROM works in Dopod D600?

[tb146]

BTW, does this ROM works in Dopod D600?

I don't think so since D600 not Prophet. You have to search WM6 for D600

[mostafa0007]

plz .......

I want this verison of omapclock ......... i googled it and i can't find it

[varadha_Balaji]

How to configure EDGE Connection, I could not do that using the connection settings.

Thanks and Regards,
V.Balaji

[tb146]

A preview using EVO7.2en and some modification base my Knowledge
- Chinese character in the Month setting after hard reset, not fully English Language <-- Impossible to fix beside re-cook the ROM

- HTC X-Button still using Chinese Version <-- Re-write with English Version

- Application Installer cab will erase after installation <-- change with :
HKLM\Software\apps\Microsoft Application Installer\nDynamicDelete = 0 (DWORD decimal) and by adding the "/nodelete" option to the Windows CE loader: HKCR\cabfile\Shell\open\command = 'wceload.exe "%1" /nodelete' (REG_SZ string, no quotes)

- Chooping Character already Fix by EVOEngFix.cab

- Changing some Graphic Cache,Font Cache and File System Filter Cache to speed up the menu

- No MMS <-- Install Arcsoft MMS
- No Network Wizard to configure the GPRS <-- Install Network Wizard
- Wifi is Working smooth
- Bluetooth Connection is working good but not tested for A2DP
- Infra Red is working smooth
- International Phone Pad worked in this Version
- Available Memory is the same with the earlier version

[iiiox]

A preview using EVO7.2en and some modification base my Knowledge
- Chinese character in the Month setting after hard reset, not fully English Language <-- Impossible to fix beside re-cook the ROM

- HTC X-Button still using Chinese Version <-- Re-write with English Version

- Application Installer cab will erase after installation <-- change with :
HKLM\Software\apps\Microsoft Application Installer\nDynamicDelete = 0 (DWORD decimal) and by adding the "/nodelete" option to the Windows CE loader: HKCR\cabfile\Shell\open\command = 'wceload.exe "%1" /nodelete' (REG_SZ string, no quotes)

- Chooping Character already Fix by EVOEngFix.cab

- Changing some Graphic Cache,Font Cache and File System Filter Cache to speed up the menu

- No MMS <-- Install Arcsoft MMS
- No Network Wizard to configure the GPRS <-- Install Network Wizard
- Wifi is Working smooth
- Bluetooth Connection is working good but not tested for A2DP
- Infra Red is working smooth
- International Phone Pad worked in this Version
- Available Memory is the same with the earlier version
Hi, explination and solution for issue 1 and 2 you mentioned above:
1. EVOen series is a literally WWE version which sopports Western and Eastern languages all together. This is why the font Mingliu is built-in, and this is why the default nls causing character-chopping on a few setting pages. By setting nls this way, Chinese sentences can be shown properly with PIE (a PIE's bug, no other brousers have the same problem)
2. ha! Youzii had released a cab (2K) to fix the X-button problem for his careless, haha!

And thanks for your report about cab-dissapearing-after-installing. I'm forwarding the message to 01^^" Or visit 01 http://www.mobile01.com/topicdetail.php?f=224&t=388826&last=3574981 to post the report to get quicker response and help from Youzii ^^ (Don't worry about typing in English there^^)

[iiiox]

For users with Chinese names on your namelist:
Users who like to check your namelist with Celedial instead of the default SmartDialing, please modify the registry as below:

[HKEY_LOCAL_MACHINE\Security\Phone\Skin]
change the path from "Ext"="\\windows\\phcanhtc.dll" to "Ext"="\\windows\\celedial1.dll" (reboot your device to get it^^)

[kelvin k]

I finally did it & you were right, the quick dial did not work. Email & SMS/MMS do not work in Cube are the only problem I face in EVO7en as of now. Other than that, it is a great ROM for me. Hope EVO8en will solve these issues :)

UPDATED!!!!
WARNING: DO NOT FOLLOW STEPS BELOW, IT CAUSES QUICKDIAL MULFUNCTIONAL!

OK, solve the problem once and for all as steps as below:
1. reinstall EVO TouchCubeEn.cab
2. move all files in the FLO folder to the Windows folder
3. import the attached registry

What you get after the steps are done:
1. Email and SMS/MMS problems fixed
2. the missing "pressed" icons fixed
3. the incompatibility with Touch Settings fixed.

[tb146]

Hi iiiox,

just want to share another bug for EVO7.2en.
Usually in other ROMs, if i want to send message (SMS) , i just write the contact name person in the destination form ("to") and the WM6 will suggest some names with the same letter i write. but in this version the WM6 didn't act like that.

Please help me to solve it so i can easily send a message only typing some character of the contact name.

[bugsywabbit]

Hi iiiox,

just want to share another bug for EVO7.2en.
Usually in other ROMs, if i want to send message (SMS) , i just write the contact name person in the destination form ("to") and the WM6 will suggest some names with the same letter i write. but in this version the WM6 didn't act like that.

Please help me to solve it so i can easily send a message only typing some character of the contact name.

Use PocketCM.. It's cool, gives you the chat-like screen...

[tb146]

Use PocketCM.. It's cool, gives you the chat-like screen...

Hi There,
Thanks for your suggestion but i prefer to use word suggestion as standar WM6 feature. In this ROM the word suggestion doesn't work even i tried to change by the registry and also install wordsuggestionfix.
I like the word suggestion.

Anyone can help ?

[ndCChris]

have problems. can't install evo7.2 on my g4 device. the dos-mode during flashing crashes every time. step1 causes stuck at bootloader mode

[iiiox]

Hi There,
Thanks for your suggestion but i prefer to use word suggestion as standar WM6 feature. In this ROM the word suggestion doesn't work even i tried to change by the registry and also install wordsuggestionfix.
I like the word suggestion.

Anyone can help ?
Hi, the failure of word-suggestion is a known bug for EVO7.2en (as i know, Youzii built Chinese IMs a step before package the rom which resulted in the failure because the dlls for Chinese IMs crashed the original dlls). I had report it earlier and keep waiting for his new release.(EVO8en share the very same bug, too^^)
Here is an alternative other than waiting, try to find *.dlls listed as below, drag them to the Temp folder and then delete them. This method is not yet confirmed by myself so just be sure if you feel happy to try to it^^
----------------------------------------------------
"msimeph.dll"
"msimeuic.dll"
"msimecj.dll"
"msimeuic.dll"
"phonim.dll"
"phonim.dll,0"
"chajeiim.dll"
"chajeiim.dll,0"
"mboxcht.dll"
"mboxcht.dll,0"
----------------------------------------------------

[iiiox]

have problems. can't install evo7.2 on my g4 device. the dos-mode during flashing crashes every time. step1 causes stuck at bootloader mode
Please read the fourth post of this thread. There is an "step-by-step" instruction^^.

[ndCChris]

does anybody downloaded the evo8en version and tested it? on my device it stucks on bootloader screen. (g4 modell)

[emmeborn]

does anybody downloaded the evo8en version and tested it? on my device it stucks on bootloader screen. (g4 modell)

I have tried it, but only for a couple of hours. I did not like the font, but otherwise felt ok. Did not do a complete test but it felt stable for that short period.
I have a G3 by the way.

[tb146]

Please read the fourth post of this thread. There is an "step-by-step" instruction^^.

Hi iiiox,

I think it is better to build English version without chinese character since there are some incompatible things so the ROM doesn't maximized.

[iiiox]

Hi iiiox,

I think it is better to build English version without chinese character since there are some incompatible things so the ROM doesn't maximized.
Hi, this was what i suggest at 01:
---------------------------------------------------
The upcoming EVO8en is still highly anticipated by users here and at XDA. But, unless I'm totally wrong, the way EVOen displays its fonts might have tarnished its sheen to the eye of users in XDA, though it's unbelievablly simple to get around by setting the registry of nls otherwise as the default value.... -_-
--------------------------------------------------
Yet, everything depends on the SOLE developer, Youzii ^^"

P.S. As I mentioned earlier, I guess Youzii is forging a World Wide Edition for users everywhere rather than a World Wide English disguised as a truely WWE . This is an extermely painstaking task or M$ should have done it long ago.

[bugsywabbit]

P.S. As I mentioned earlier, I guess Youzii is forging a World Wide Edition for users everywhere rather than a World Wide English disguised as a truely WWE . This is an extermely painstaking task or M$ should have done it long ago.

frankly, I think M$ should provide the additional languages as plug-ins or easy add-ons or easy configuration.
You don't see me searching for ROMs if I want Chinese in my Nokia or Sony Ercisson.

[iiiox]

frankly, I think M$ should provide the additional languages as plug-ins or easy add-ons or easy configuration.
You don't see me searching for ROMs if I want Chinese in my Nokia or Sony Ercisson.
Good thinking! Yet A Lot Easier Said than Done....

Let's talk about M$ system alone, which is, unless you are not aware of, very very different from Nokia's and the sorts.

To give a cabinet file or a today plugin for Chinese character"s" is not so difficut as Ce-star, Monster had done ages before, hadn't they?

The problem is how to maintain the reliablity, resonable avilable memory, and speed, isn't it?

EVO7en is certainly not perfect in some aspects while, to my knowledge, its complain of stability is rearly to be seen here, its amazing available program memories 28.xM overperforms almost every single rom here, and its rapidity ramains unchallenged even in the comparison of the new arrivals.

Still regard it an easy task that M$ can handle with cosily? I am convinced that you would like to think it twice, aren't you? Or you may give it a try to prove me a noob.

Individual rom Developers develops their own chatacteristics while developing new roms with new traits. Youzii, so far, choose to make Taiwan users first, so the charecter displaying problem ensued. Many users just as I myself, are persuading him to switch "nls" to U.S.A with a option to activate a Taiwan nls.

How about EVO8? Well, post your idea at 01 and let's wait and see...
http://www.mobile01.com/topicdetail.php?f=224&t=388826&last=3589346

[kelvin k]

I am another one that patiently waiting for EVO8en to be released. I've been using EVO7en for about a month now. My 6 weeks limited experience as a PPC owner really does not put much weight on my comment or feedback, but I still like to express my "wish" in upcoming EVO8en. :D

1. Fix not functioning Email & SMS/MMS in Cube
2. Include Cube & HTC_Home by default
3. Capable to read & input simplified & traditional Chinese (like installing CHTIME)
4. Maintain stability & speed of EVO7en

That's all :p

p/s: I don't care about English words suggestion.

[dioxda2]

Hi iiiox,

just want to share another bug for EVO7.2en.
Usually in other ROMs, if i want to send message (SMS) , i just write the contact name person in the destination form ("to") and the WM6 will suggest some names with the same letter i write. but in this version the WM6 didn't act like that.

Please help me to solve it so i can easily send a message only typing some character of the contact name.

Dear tb146,

If your email issue is really crux to you, before EVO8, you may try another missed surprise the " EVO7en" (not 7.2), emails and SMS matters are quite fit your needs..... ^_^

[tb146]

Dear tb146,

If your email issue is really crux to you, before EVO8, you may try another missed surprise the " EVO7en" (not 7.2), emails and SMS matters are quite fit your needs..... ^_^

Thanks for the information, i have tried the EVO7en.
but there is some bug in it, now i am using crystal V1 and everything is enough for me. I hope EVO8en will have the word suggestion activated and less bug including chinese character in the time setup during the hard reset.

Thanks

[dioxda2]

Thanks for the information, i have tried the EVO7en.
but there is some bug in it, now i am using crystal V1 and everything is enough for me. I hope EVO8en will have the word suggestion activated and less bug including chinese character in the time setup during the hard reset.

Thanks

Thanks tb146, thanks for your opinion. ^_^

On the other hand, I found a really historical

*** "" BIG BUG "" ***

I feel so frustrated this afternoon.... my machine kept in rebooting.... or stopped, and rebooting...... I had NO CLUE since I had only installed a few software and just started to test with the web browser software (ftxPBrowser), suddenly it faded and struggled like gonna die whilst the battery count was showing 55% ......... ~~~~~~ +_+

1. installed 60% and fine custom tuned for hours to my 818EVO, +_+
2. I am an expert in PDA (beginner), how come it could had happened to me???? ( a kind of depressssssed ),
3. I just had it bought in 17 months ago...........WAIT ....... 17 MONTHS AGO???

FINALLY, THE ANSWER / SOLUTION IS ......

i/. the big stupid bug is in my head, not in my 818EVO,
ii/. the a bit swelled original battery, in the trash can now,
iii/. a happy dog (me), and
iv/. a happy prophet (my 818EVO).............. ( all big brothers here please don't laugh (too loud) at me~~~~ +_+

[iiiox]

Superb! A Chinese PURE IM cab from Studio Kuma!

I've tried Youzii's EVOen with "IMonly", Gullum's V7, Crystal V1 and Claudyfa's Transformer V1 with both ime-mingliu and ime-msjh aleady. The result is one step from perfect --the automatic word-suggestoin fails after installing the cabs above. Other than that, everything works like a charm! Stark wong is the real man!

Download: http://www.studiokuma.com/wm/?section=support

Note: try Ce-star instead if english suggestion is important for you^^

[iiiox]

Thanks tb146, thanks for your opinion. ^_^

On the other hand, I found a really historical

*** "" BIG BUG "" ***

I feel so frustrated this afternoon.... my machine kept in rebooting.... or stopped, and rebooting...... I had NO CLUE since I had only installed a few software and just started to test with the web browser software (ftxPBrowser), suddenly it faded and struggled like gonna die whilst the battery count was showing 55% ......... ~~~~~~ +_+

1. installed 60% and fine custom tuned for hours to my 818EVO, +_+
2. I am an expert in PDA (beginner), how come it could had happened to me???? ( a kind of depressssssed ),
3. I just had it bought in 17 months ago...........WAIT ....... 17 MONTHS AGO???

FINALLY, THE ANSWER / SOLUTION IS ......

i/. the big stupid bug is in my head, not in my 818EVO,
ii/. the a bit swelled original battery, in the trash can now,
iii/. a happy dog (me), and
iv/. a happy prophet (my 818EVO).............. ( all big brothers here please don't laugh (too loud) at me~~~~ +_+


Hahaha!!! brother diowong! poor you!
P.S. EVO8en RC (or final^^??) is on the way.... it's even faster than Evo7en and definetly the most reliable one I've ever tried..everything is just superb!!

[maxniper]

Hi iiiox,
Do you know when is releised EVO8en?
I'm using EVO8en Test

[varadha_Balaji]

Hi iiiox,

Can you please tell me on how to configure this. While using WM5 we use have a connection type called cellular line(gprs) which is missing in the rom.

Thanks in advance.
V.Balaji

How to configure EDGE Connection, I could not do that using the connection settings.

Thanks and Regards,
V.Balaji

[iiiox]

Hi iiiox,

Can you please tell me on how to configure this. While using WM5 we use have a connection type called cellular line(gprs) which is missing in the rom.

Thanks in advance.
V.Balaji
Sure! Get "HTC Kaiser Network Wizard" >> http://forum.xda-developers.com/showthread.php?t=316107&highlight=kaiser%27s+htc+home+plugin

[askinh]

very stable rom, thanks