after install 3.3.3 my atom bricked it stuck o2 screen pls help

[ilguncel]

hi

i updated my atom rom version to 3.3.3 three days ago.It installed completed i used this rom 3-4 hours then i was freeze and i try to reset it. it didnt respond so i decided to hard reset to my atom.I tried to hard reset now it says "device clean boot....." it stuck this screen then i try to reset the device then it stuck o2 screen it didnt pass to align screen. i cant use my atom for three days

Please help me......

[ironeagle]

remove the battery for a while.. then try hard reset / reflash

[ilguncel]

i try this method but it is same it doesnt work

[ironeagle]

did u try the instructions posted in aku 3.3.3.??..

"
For those of you who have downloaded and flashed using SD Card method who ended up in a brick! ITEX recovers his Atom by following procedure:
1. remove SD Card
2. remove battery
3. hold camera button and reset (stylus) button
4. replace battery while still holding the buttons
This will bring you back to bootloader mode. Just flash the above DSUU.
"

[joolawan]

Does it have a chance to use wm6?

[homer285]

Does it have a chance to use wm6?
it can barely use WM5 and anyway these chinese splash their advertising for WM6 all over the place in hope ppl will buy their rom, until I see it running in my device or get confirmation from someone reliable (such as Jiggs) I dont believe a word of it and besides the 3.3.3 rom is very fast and ten times better than any actual official release:D

[ilguncel]

yes i tried to that method too. it is same it still stuck on o2 screen. it doesnt pass to align screen..please help me

[ilguncel]

my problem didnt solve pls help me i cant use my atom..........

[ilguncel]

plsssssssss help meeee...........

[ironeagle]

R U able to go to bootloader mode ?...

[generalriden]

R U able to go to bootloader mode ?...


try to be on the bootloader and reflashed the ROM. try to search same cases in the forum. I think they solved the problem alike.

[sevgiesenler]

yes same to problem. i dont re enter bootloader again :S

[ironeagle]

did DSUU Recognize your ATOM ?..

Connect your ATOM to PC (using USB)

Run DSUU

Try to flash it..

[ilguncel]

i can enter bootloader mode and i can update rom but after this proccess it says "device clean boot......" and it freeze . it doesnt pass to align screen

plssss help meeeeeeee.

[ironeagle]

Which ROM you flashed?..

[ilguncel]

i flashed orginal atom rom i downloaded from seeo2.com

[ilguncel]

pls helpppp meeeee my atom is dead

[davidw89]

are u using o2 atom exec or just atom?
cuyz i've got o2 atom exec..maybe i could flash it with o2 atom (yeah i cant flash anything with dsuu)

[ilguncel]

mine is o2 atom

[dcoloane]

did u amend any thing from the original ROM from seeo2? I mean you flash your atom with the original ROM...0426? without replacing the extended ROM...etc?

[ilguncel]

yes i flash orginal rom i didnt change anything on orginal rom...

[ilguncel]

plsss helppppp mee my atom isnt alive for 15 days....help me pls

[ilguncel]

plssss help meeee............

[ericj]

plssss help meeee............

Hi ilguncel Please read the below link carefully flash you atom again everything will be ok
http://forum.xda-developers.com/showthread.php?t=314613

[ilguncel]

yes i tried this method but it is same help me plsssssss

[jiggs]

yes i tried this method but it is same help me plsssssss

describe in step by step how you update your atom.

[jeffkewin]

My O2 atom also stuck at o2 screen sometimes the black screen which show "USB Connection Utility", due to flashing and my pc suddenly shutdown

I managed to revived it by:
1) took out the battery and minisde
2) put back battery without minisd
3) press the reset button, I still see black screen but orange led light
Note: if you see should see orange led light, if yes it is still alive (make sure the usb cable is insert in)
4) quick take out the battery again
5) put back the battery and press camera button and reset together
6) you will be now inside the Quantas 2004 .. debug mode
7) run the software upgrade utility

:P hope it help

[ilguncel]

i setup last win6.0 rom but it is same it isnt working

1 i remove sd card
2 i remove battery
3 i hold camera button and reset button
4 while this process i take battery
5 i go to bootloader mode
6 then i flash win6.0 rom with dsuu

but it is same it stuck "device clean boot......"

plssssssssss help me.........

[ilguncel]

help meeeee plsssssssssssssss

[dib0231]

Can you help please?. My rw6815 after upgrading to wm6.1 of Biohazard cable / pc in total. Before I left the blue screen of Biohazard. Today, after many restarts I managed to bring up the black screen with writing "Device clean boot ...... reset to factory default !!"""". I attacked the usb to PC for power and possible connections to the PC . But an hour has not changed and the computer screen does not acknowledge it. What do I do ????? Greetings Raphael. Translated from Italian by Google.