3300 dont start anymore

[movilstore]

ive got a htp 3300 from movistar spain and i allready got it unlocked, yesterday i put the wm6 english on it and today y tried to put
PDAMobiz_Dopod_P800W_AKU301_v1.1.2_PowerMap, now
i can see only the white htc screen
IPL 3.007.001
SPL 3.07.0000
GSM 02.69.90

OS 1.28.0.0

the phone dont start anymore

y need helpe please

[NikMel]

Can you get in to the bootloader?
If you do then you can put an original rom back. If you don't then send it to the service.
An unlocked device is out of warranty so be prepared to pay for the service.

Go to wiki of Artemis there you can find the method to get in to the bootloader.

Goof luck! << you need that.

[movilstore]

you meen push the record button and reset in the same time???

i tried this befor but never go in bootloader modus maybe i make something wrong pleas help me

[NikMel]

As of this http://forum.xda-developers.com/showthread.php?t=308242#1 threath of meschle states your device is a brik.
I'm sorry to tell you that.

Do Not flash your Artemis with a different carrier/cooked Rom without cid unlocking

--------------------------------------------------------------------------------

Noobs beware!
As a number have been flashing their devices with various roms not from their own carrier or country or cooked roms and bricking their device - I put up this sticky. Your device must be cid unlocked first before you do this. This applies to the coming wm6 roms to - if the rom is not specific to your device - i.e. if you try to flash the upcoming htc 3300 wm6 rom on O2 orbit - you must cid unlock first - with imei check or you will end up with a BRICK!

This does not apply if you are only updating the os http://forum.xda-developers.com/showthread.php?t=299154 or radio.

cid = country id i.e. locked to that country/language/vendor

cid unlock for the artemis is here with USPL http://forum.xda-developers.com/showthread.php?t=311403 (thanks pof)

or here http://www.imei-check.com/c3unlock.php (costs though)

Bricked devices

If you have flashed your device and not cid unlocked it, your device maybe salvagable if you can get it into bootloader mode.

Hold down the voice speed dial button and soft reset - you should then enter bootloader mode 'multicolored' screen'

If you do, attach device to pc via usb cable (a small usb will appear bottom left of screen) and flash factory rom. (run rom executable or RUU updater from pc) You do not need to be activesynced to do this.

HTC P3300 WWE factory rom downloadable here http://rapidshare.com/files/19322112...0_WWE_SHIP.rar

Dopod P800 WWE factory rom downloadable here http://rapidshare.com/files/21058219...0_WWE_SHIP.rar

O2 Orbit WM5 WWE factory rom downloadable here http://rapidshare.com/files/41574866/Arteimg.nbh

O2 Orbit WM6 WWE factory rom downloadable here http://rapidshare.com/files/46377862....90_Shi p.exe

Before you flash again with a non-factory rom, your device MUST be cid unlocked.

If you cannot enter bootloader mode your bootloader has been damaged and your device will need to be sent away for repair.

[lommer]

ive got a htp 3300 from movistar spain and i allready got it unlocked, yesterday i put the wm6 english on it and today y tried to put
PDAMobiz_Dopod_P800W_AKU301_v1.1.2_PowerMap, now
i can see only the white htc screen
IPL 3.007.001
SPL 3.07.0000
GSM 02.69.90

OS 1.28.0.0

the phone dont start anymore

y need helpe please


i had the same problem and took me 3 days to fix it. so maybe this will work for you too !

first take out the battery for 30 min then push the reset button and put the battery back and turn on the device. if this not working. try to start bootloader by pressing and holding the record button and on/off button and push the reset butoon in the same time but keep pressing the record button and on/off button till a colored screen shows up??? sometimes it doesn't appear at the first time so just keep trying .

if you have bootloader you can reflash a rom. but you need to format your memorystick first to fat on your pc then put the image rom (nbh file) and rename it to Arteimg.nbh !! i used OrbitO2UK image.