ms voip support working?

[netsee]

hi,

i can't seem to get it working. people can hear me, but i can't hear them

Anyone got this working?

Thx

[xplode]

it should work, i have not tested it but it should work, the files and registry entryes are taken from a hermes rom for which i am sure that it work and it is the same core and build as ours

[sunish]

i was able to launch the setup earlier... and decided to do it later on..
but when i tried after 2 days ... it just crashed...
did uninstall... softrest... install.. routine few times... and gave up.

[robertut]

I successfully connected to my Hungarian Voip provider (megafone) but no sound at all. Dialing is okay, but I cannot hear it ringing out, cannot hear the other party, they can't hear me. However the connection is there and the connected seconds are charged.

GSM phone, Skype and Fring are working well, only the Ms Voip has problems.

[robertut]

My settings look like this. The 'Dial plan' tab is empty. Is this normal?

[robertut]

Also noted that it didn't terminate the call normally as I pressed the red button, it kept charging on for 15 minutes of talk...

[xplode]

well now i think that something is missing, maybe audio encoders and decoders on which VoIP is dependant, i will look into this and will keep you posted

[robertut]

My tip is also codec-related.

[robertut]

Is it normal that via ActiveSync the voip says No Service? With WiFi it says Available, I think it should also with ActiveSync.

[robertut]

are there any news?

[cdaly1970]

I don't have an issue with VOIP working on my SX66. In fact, I was surprised by how easy it was to get going.

-Chris

[robertut]

You were lucky that your provider uses the same codec as this WM6 build does.

[cdaly1970]

Since I don't use something like Vonage, or Comcast VOIP, I just went out and found a VOIP provider online. VOIPCheap.com works great with this build.

-Chris

[robertut]

Many of us prefer a local VoIP provider though.

[doorbell]

Some additional info on the problem with receiving audio. (same is on my phone). I checked which codec this SIP stack negotiates.
Apparently, out of all available, MS VoIP settles either on PCMA or PCMU depending on the other end availability, and refuses other most common ones.

Well, it encodes and sends RTP which I receive on other non wm6 phones and I am sure it receives RTP, and may even decode it, but by the look of it, not a squick is sent to the hardware/speaker.

Cheers

===
Sorted by installing Voip support from (ftp://xda:xda@ftp.xda-developers.com...es/WM6VoIP.CAB)
and installing on top of the existing (from voip.cab - can't remember the source).
Although the dialplan tab is still blank (requires ipdialplan.xml, I guess) but the SIP settings are remain intact after this 'patch'.
====

[XdaIIs]

I've just tested the MS voip with 3 different VOIP providers, and I also have the "sound" problem with it.

When I use an other VOIP application (like SJphone) all is working fine, so it must be a codec problem that is missing.

[websparc]

I just looked at VOIPCheap.com website. It's sounds interesting. Never tried VOIP from BA. Can someone tell me what i need to do to use VOIPCheap.com on BA to make VOID calls apart from creating an account with VOIPCheap.com? Thanks guys.

[websparc]

Never Mind. Please ignore my last msg. I think i got the answer on there website in FAqs. I'll create the account and see how good it is.
Anyone have any good/bad feedback for VOIPCheap.com service?

Thanks.

[xplode]

There are a lot of threads for VoIP problems in the forums many issues are solved there, i suggest al of the VoIP users to search and read there. Also i understood that difrend providers use difrend encoding-decoding so thats why it works for some and not for everybody

[boobee]

did someone find a fix for the muted audio issue?

i've read many threads about many voip issues on the other forums available here, but it seems like the small amount of ppl who had this problem was left quite alone..
I'm trying to place calls via my asterisk 1.4 box.

thanks

[XdaIIs]

did someone find a fix for the muted audio issue?

i've read many threads about many voip issues on the other forums available here, but it seems like the small amount of ppl who had this problem was left quite alone..
I'm trying to place calls via my asterisk 1.4 box.

thanks

I did for my XDA2s (with WM6 and MS voip).
I needed to change a DLL file (rtcdll.dll), that I downloaded from some place from this forum.
I can not find the thread with the download link to the DLL, so I've uploaded it again. The link to it is: http://www.data-hosting.eu/v/3516442/rtcdll.zip

Please make sure that you make a copy of the original version before using this one (just in case)

You will need to unzip the rtcdll.zip, and put the rtcdll.dll in the \Windows directory of your BA

[bluesnake]

I have the same problem with MS VOIP and WM6.

I've tried to configure it with the integrated config util however doesn't work.

I step forward was to use the SIPConfig util 3rd party util whereby i managed to connect to my PABX astertix system. However failed to to connect to SIPGate for some odd reason on the same network - i.e. just different sip configuration, user and pass.

It is there a need for a STUN server?.

Using the PBX (status available) i could connect however no incoming or outgoing audio whatsoever. Call is in progress as many users in this thread claim.

Didnt replace the above DLL file yet.

Did someone managed to solve this problem?

Is there any other PPC VOIP app better than SJPhone?

thanks

[boobee]

I did for my XDA2s (with WM6 and MS voip).
I needed to change a DLL file (rtcdll.dll), that I downloaded from some place from this forum.
I can not find the thread with the download link to the DLL, so I've uploaded it again. The link to it is: http://www.data-hosting.eu/v/3516442/rtcdll.zip

Please make sure that you make a copy of the original version before using this one (just in case)

You will need to unzip the rtcdll.zip, and put the rtcdll.dll in the \Windows directory of your BA

thanks a lot, just tried and after a reboot it worked perfectly!

[holzzelt]

yey thanks a lot, works fine with me. however, the sound is very quiet, even if i turn it up to max. any way to fix it?

[eurorpeen]

Link expired or too many download

Can you post another link please ?

[eurorpeen]

Nobody will post the correct version of this dll ?

Everything work on my BA for voip, EXCEPT that i doesn't hear anything on the BA but the others can hear me, very frustrating

[testuser0072]

Here is: rtcdll.dll (http://anonym.to/?http://rapidshare.com/files/59980842/rtcdll.zip)

[Erasmuz]

My settings look like this. The 'Dial plan' tab is empty. Is this normal?

How do you get these settings up?

I purchased a HTC P3600i from Three that had the VOIP feature removed. I re-added the WM6 VoIP cab file, SIP Configuration Tool 2.0.1, and copied the rtcdll file. It seems to work on some wireless routers (must have something to do with the firewall/open ports)

The only settings I have in my phone are in the Phone Settings to set "Internet Calling", and there are some when I run the config utility where I can set my SIP provider. I can't find anywhere like the screenshot you posted to setup things like Dial Plans?