TOFCLOCK HIMA WM6 AKU.0.7.0 Fresh!

[dzaprojects]

My 1.18 Radio shuts my Hima as low as 18%-10%. good enough!!! :D

[nesty24]

My 1.18 Radio shuts my Hima as low as 18%-10%. good enough!!! :D

Really? I've tested 1.19, 1.17 and 1.08 but it shuts at 30%. Is the 1.18 really good and shuts lower than 30%? they say the best radio was 1.08 and 1.18 in terms of performance not on the percentage of the battery.

[The_hesham]

Really? I've tested 1.19, 1.17 and 1.08 but it shuts at 30%. Is the 1.18 really good and shuts lower than 30%? they say the best radio was 1.08 and 1.18 in terms of performance not on the percentage of the battery.

I changed the Radio to 1.14 (original Radio for Hima)
I had ur prob as mention b4 but
when I changed the Radio to 1.14 The mobile suht at 25% battery
I think it will be solved by registry change
i hope our experts help us.

[Kato]

Hi, please have any problems with speed? Now I use this version rom of WM6, but.. Previousely rom, what I had installed (WM5 with AKU 3.5 - Helmi Himalaya AKU3.5 ROM SP2 rebuilt by Moeya Leonhart) was more quickly on my device.

And what "Settings-->System-->Performance"? When I enable this feature, device is extreme slow.
Btw. programs I have installed last X years that same. There is not a hitch in it.

[earvin_paul]

Hi, please have any problems with speed? Now I use this version rom of WM6, but.. Previousely rom, what I had installed (WM5 with AKU 3.5 - Helmi Himalaya AKU3.5 ROM SP2 rebuilt by Moeya Leonhart) was more quickly on my device.

And what "Settings-->System-->Performance"? When I enable this feature, device is extreme slow.
Btw. programs I have installed last X years that same. There is not a hitch in it.

hey, dont expext to much from this ROM because it is just the first WM6 ROM for Himalaya. let us wait till the other developers can cook more WM6 ROM. i agree that it is slower than the WM5 3.5 Helmi ROM but it is quite stable on its own. lets wait a bit and maybe they can have the TouchFLO working on our hima. :) :)

[ojebz]

...lets wait a bit and maybe they can have the TouchFLO working on our hima. :) :)

wow, can't wait to let the magic of touchflo tech on our old himas :D
let's dream first, and make it a reality soon... :)

[adonan]

Masya Alloh :)

[utak3r]

Are you experiencing any problems with battery life?
at wat batt% does the Hima HR or die?

To be honest - I don't know :D In a working week I have my Hima almost all the time connected, so... And through a whole night it drains for just few percent, so in the morning it's 70-80%.

Maybe on this weekend I'll see if it happens to me.

[obaz]

Anyone have bug whith IE slowdown ?
It when on page exist a lot of text ?
Any feedback ?

[fast666]

i didnt find tray launcher in this rom,how can i put programs in tray , thanx alot its the best rom.

[fast666]

[QUOTE=fast666;1512507]i didnt find tray launcher in this rom,how can i put programs in tray , thanx alot its the best rom.[i dont drive fast... i fly low]

[badbadtz.carlo]

@utak3r
based on ur signature,

HTC Himalaya - PlusGSM (Poland)
WM6 AKU 0.7.0
Radio 1.19

Are you experiencing any problems with battery life?
at wat batt% does the Hima HR or die?

i can only get upto 30% on this ROM..
on WM5, i can get upto 9%..

same apps, except HTC home..
but i took out HTC home, and got same results...

crap! upped the radio to 1.18 and still gets upto 29% batt life only..
with or without HTC home... would changing the pagepool and RAM config have any effect on the batt life?

this ROM is perfect for me if the batt drain would be slowed down and would only die at 10% or lower...

:(

[badbadtz.carlo]

http://http://wiki.xda-developers.com/index.php?pagename=Hermes_Registry (http://wiki.xda-developers.com/index.php?pagename=Hermes_Registry)

Power Management for Hermes - Increase Battery life

[HKEY_LOCAL_MACHINE\Comm\AsyncMac1\Parms]
"DisablePowerManagement"=dword:1
Change to
"DisablePowerManagement"=dword:0

[HKEY_LOCAL_MACHINE\Comm\Irsir1\Parms]
"DisablePowerManagement"=dword:1
Change to
"DisablePowerManagement"=dword:0

[HKEY_LOCAL_MACHINE\Comm\PPTP1\Parms]
"DisablePowerManagement"=dword:1
Change to
"DisablePowerManagement"=dword:0

[HKEY_LOCAL_MACHINE\Comm\L2TP1\Parms]
"DisablePowerManagement"=dword:1
Change to
"DisablePowerManagement"=dword:0

This will turn on power management for the above protocols. Logically, it should save us some power.

Form thread


found this registry hack for Hermes..

do we have something similar for WM6 Hima?

[Sudarjanto]

Thanks Helmi its wonderfull ROM WM6 for O2 XDA2:) :) :)

[The_hesham]

http://http://wiki.xda-developers.com/index.php?pagename=Hermes_Registry (http://wiki.xda-developers.com/index.php?pagename=Hermes_Registry)

Power Management for Hermes - Increase Battery life

[HKEY_LOCAL_MACHINE\Comm\AsyncMac1\Parms]
"DisablePowerManagement"=dword:1
Change to
"DisablePowerManagement"=dword:0

[HKEY_LOCAL_MACHINE\Comm\Irsir1\Parms]
"DisablePowerManagement"=dword:1
Change to
"DisablePowerManagement"=dword:0

[HKEY_LOCAL_MACHINE\Comm\PPTP1\Parms]
"DisablePowerManagement"=dword:1
Change to
"DisablePowerManagement"=dword:0

[HKEY_LOCAL_MACHINE\Comm\L2TP1\Parms]
"DisablePowerManagement"=dword:1
Change to
"DisablePowerManagement"=dword:0

This will turn on power management for the above protocols. Logically, it should save us some power.

Form thread


found this registry hack for Hermes..

do we have something similar for WM6 Hima?


Yes it is the same ,

But no improvment, the mobile shutdown @ 40% battery !!!


Regards

[ciberus]

I terminate the first release of the patch to put this rom in Spanish, unpack to SD and follow the instructions included in the txt file.

http://rapidshare.com/files/56035427/TofClock_WM6_Spanish.zip

Many thanks to Helmi and his collaborators.

[amir31_s]

Can I Install HIMA on my Imate,Jasjar please???
Is it work Good??? :confused:

[sliderstrain]

the midlet manager isnt working
the battery dies quickly
i think the problrm of the radio that shuts with the battery is a hardware issue as it doesnt happen to me , it is still alive at 10%
I guess we need to increase the storage more than (30MB using the DOC) as still many softwares put some files in the storage although i choose the RAMdisk and the storage card in the installion

[The_hesham]

Can I Install HIMA on my Imate,Jasjar please???
Is it work Good??? :confused:

No u can't

Go here u will find what u want

http://forum.xda-developers.com/forumdisplay.php?f=357

[kennychannel]

Just flashed now! And the GPRS is working! Everything is great!!
Thanks Helmi_C for hard work!

[malcomx2005]

Please Help

*How Fast BlueTooth On/Off?
*How Listen To Music by BlueTooth Mono HeadSet?
*Encryption Not Work?

Thanks

[SaBo]

i think the problrm of the radio that shuts with the battery is a hardware issue as it doesnt happen to me , it is still alive at 10%

It definitely is.
I have 3 batteries (2 original 1200 mAh, one 1500 mAh after market) and two devices.
Both devices run up to approx. 10% with original batteries and shut off at 30-40% with after market battery, both under WM 5.0 and WM 6.0.

Sascha

[opflicft]

is it possible to disable network wizard?

[helmi_c]

It definitely is.
I have 3 batteries (2 original 1200 mAh, one 1500 mAh after market) and two devices.
Both devices run up to approx. 10% with original batteries and shut off at 30-40% with after market battery, both under WM 5.0 and WM 6.0.

Sascha

yes, on my device (well at least the one o borrow) it still ok on 7% battery..

is it possible to disable network wizard?


If you start the phone with no sim, the network wizard will not start... or if you dont need it, just close or abort on first network wizard start.

[badbadtz.carlo]

yes, on my device (well at least the one o borrow) it still ok on 7% battery..




If you start the phone with no sim, the network wizard will not start... or if you dont need it, just close or abort on first network wizard start.

i have original 1200mah, and funny reading this observation; i borrowed a friend's battery fairly new 1200mah original and another one's after market - dynatech 1500mah

tested them on my Hima..
radio 1.08, ROM TOF Fresh wm6

same results! 29%! this is so frustrating... :mad:
it's got to be something else..

:confused:

[erdond]

does anyone here can tell me how to use the Wi-Fi card in WM6?? im totally new in wi-fi card.. is there some configuration must be done?? thanx..

[ciberus]

is it possible to disable network wizard?

Open regeditor go to:

[HKEY_LOCAL_MACHINE\init]

And delete:

"Launch101"="NetworkWizardAuto.exe"

[wayliec]

Thanks :rolleyes: I'll look something to remove now.
It's great, just I have to close the program from 'setting>memory> close all running program' manually. Is there any like spb software?

kimplui

Of course, but only by re-cooking it.
Yeah, personally I prefer such a configuration: 32MB of RAMDisk and 16MB of page pool. When I'll be ready with a first version of my ROM, I'll post it as such.

wayliec:
all add-ons? geez ;) You have an answer. Install only those which you really need. Some of those apps are really slowing things down.

neoshades:

what do you mean?

[silverseila]

Thank you for posting this new ROM.

I have however run into a problem. I'm using Vista Ultimate, Windows Mobile Device Center, and Kaspersky Internet Security. After I turned off Kaspersky, put my XDA II in Boot Loader Mode, and run the EXE file, it returned with a "Connection Error" message. After that happened, I soft reset the device, and was able to sync it using WMDC.

Any suggestions?

Dear, Charnk. I have problem like you. Now I try to search the solution to fix it. if i find out I'll share it to you. if you have new idea to fix this problem please share it to me. Thank in advance. Hope we injoy together with this new rom.

[temumangga]

Thanks :rolleyes: I'll look something to remove now.
It's great, just I have to close the program from 'setting>memory> close all running program' manually. Is there any like spb software?

You can use wisbar lite. It really close the app not minimize the app when you tap x button

[silverseila]

Just run the .exe file!...

Dear, Please help me to fix my ploblem. Now I use my O2 XdaII: Windows Mobile 5.0
OS 5.1.195 (Build 15698.3.5.0)
Rom Version: 3.50b.40cs
Rom Date: 01/13/07
Radio Version:1.10.00
Protocol Version: 1337.18
Ext Rom:

Now I found TofClock_HIMA_WM6_AKU.0.7.0 Fresh and I hope my xdaII will be in new looking again with this ROM and already dowloaded.
Fist I Bootloader mode my XdaII by Holding POWER buttom+DPad+Reset Than my XdaII showe up in screen "Serial" than take it on Candle it show "USB" after that I Run TofClock_HIMA_WM6_AKU.0.7.0.exe. But can't complete. show up "ERROR 101: CONNECTION ERROR" Help me please.... Please.... to fix it. Let me have the chance to use this great TofClock_HIMA_WM6_AKU.0.7.0.
Thank in Advance.

[pneuma]

Dear, Please help me to fix my ploblem. Now I use my O2 XdaII: Windows Mobile 5.0
OS 5.1.195 (Build 15698.3.5.0)
Rom Version: 3.50b.40cs
Rom Date: 01/13/07
Radio Version:1.10.00
Protocol Version: 1337.18
Ext Rom:

Now I found TofClock_HIMA_WM6_AKU.0.7.0 Fresh and I hope my xdaII will be in new looking again with this ROM and already dowloaded.
Fist I Bootloader mode my XdaII by Holding POWER buttom+DPad+Reset Than my XdaII showe up in screen "Serial" than take it on Candle it show "USB" after that I Run TofClock_HIMA_WM6_AKU.0.7.0.exe. But can't complete. show up "ERROR 101: CONNECTION ERROR" Help me please.... Please.... to fix it. Let me have the chance to use this great TofClock_HIMA_WM6_AKU.0.7.0.
Thank in Advance.

Hi What version of ActiveSync are you using? Download latest version 4.5 from Microsoft website if it is not that already and try again. Also make sure you have no other 3rd party sync apps like mail sync or anything running and check personal firewall software too.

[wozphil]

Hi,

On my device, IR doesn't work. It freezes the device when I try to beam a file or sync via IR.
That's a problem for me as I only sync via IR...
I hope one of the "himalaya guru" will be able to provide a fix...

Thanks for your graet job, guys!

wozphil

[jiri.cech]

!! GREAT ROM, my HIMALAYA is satisfied as never before. !! BIG THANK'S Helmi.

Camera bug ?
- Brightness, Zoom, White Balance - doesn't work.
- While in video mode select MMS video size (resolution), Camera stop work. FOREVER in video mode !

Active sync bug ?
- Active sync (4.5 at XP) is sloooow.
- PDA remowed from cradle and AS continue in synchronize ..

Menu sound bug ?
- "Menupop" sound be silent ..

Calculator bug ?
Calculator key "," is too low. This is IMPORTANT error !!! :)

Sorry my english. :)

[Maggy]

@silverseila:
Take care to use a USB port that's on your motherboard, not a card or external hub.

[yamskie]

Flashing my i-Mate Xda II works great!

Thanks Helmi :-)

[Nojahoda]

After using this Rom sometimes the pda stacks and then after rebooting it is stable on the tofclock start screen screen. Why is that?

Plz help

Ok i fixed. HTC HOME was the reason, ow its okkkkkkkkkkkkkkk

[silverseila]

Hi What version of ActiveSync are you using? Download latest version 4.5 from Microsoft website if it is not that already and try again. Also make sure you have no other 3rd party sync apps like mail sync or anything running and check personal firewall software too.

Hi, I use Windows Vista Altimate and ActiveSync 6.1 the latest version of Microsoft But still "ERROR 101: CONNECTION ERROR". Should I change my Computer OS to XP and use ActiveSync 4.5? Please advise the good idea to me again. Thank so much that supporting me.

[silverseila]

@silverseila:
Take care to use a USB port that's on your motherboard, not a card or external hub.

Yes I use Motherboard's USB to connect with candle. oh my computer OS is Windows Vista Ultimate and ActiveSync version 6.1. But still connection error, please give me any idea to fix it. Thank in Advance.

[Maggy]

I'm no Vista expert, haven't ever used it but I believe there are some issues, search this forum.

[help123]

tell me does dial up ( bluetooth modem) working on this rom ? becose its not working in 3.5 etc rom

[alvaseis]

Hi!
I`m new in this forum and I followed all the steps for installing this rom correctly.

I installed all the programs in the addon, I did the storage hack thing and everything was going fine because I get 16Mb of free storage.
then, I installed some programs that I didnt want, so I decided to install everything again (even W6).

I followed all the step from the first post, and everything is fine, but now I got 27.76Mb of free storage!!!!!! (there are only 2.77Mb in use!!!)

Is this normal???? What was my mistake?

Pd:(sorry for my bad english)

[Maggy]

Is having more storage than before a problem? I wish I could grow me some extra storage...

[silverseila]

I'm no Vista expert, haven't ever used it but I believe there are some issues, search this forum.

Excuse me, Could you tell about your computer OS and ActiveSyn version while you upgrade and Brand of your PDA. And how about the method step by step that you upgrade ur PDA. Have any problem with you while upgrade?
Sorry that disturb you so much.

[bigfun]

hi Helmi_C,

You have waken up my old XDA2. i can not beleive it can change so much like that. your Rom is perfect. however, please kindly help me to solve somethings as below:

1. Resco explorer, it is very slow for searching even just a click to any folder
2. Storage is very small even i install all apps on SDcard. Can you show me how to remove something that not need for me such as CallFilter, Scenarios

Thanks so much.

[sliderstrain]

1-Java midlet manager isn't working
2-the notes are read only during the call so u cant save anything in that note
3-the camera zoom isnt working
4-the hands-free (speakerphone) isnt working during the call instead it works as a hold
5-it eats the battery out

I think that the radio problem that shuts at 30% is a hardware problem as i said b4
for all the people that i know tht have O2 XdaII dont face that problem but i know some that have Qtek2020 and orange SPV that face that kind of battery problem

[nesty24]

1-Java midlet manager isn't working
2-the notes are read only during the call so u cant save anything in that note
3-the camera zoom isnt working
4-the hands-free (speakerphone) isnt working during the call instead it works as a hold
5-it eats the battery out

I think that the radio problem that shuts at 30% is a hardware problem as i said b4
for all the people that i know tht have O2 XdaII dont face that problem but i know some that have Qtek2020 and orange SPV that face that kind of battery problem

Not all... May himalaya (O2 XDAII) also shuts at 30%

[Maggy]

Excuse me, Could you tell about your computer OS and ActiveSyn version while you upgrade and Brand of your PDA. And how about the method step by step that you upgrade ur PDA. Have any problem with you while upgrade?
Sorry that disturb you so much.

Windows XPSP2 ActiveSync 2.5
I just follow step 5 and so on from the generally accepted instructions:
1. Extract the decrypted versions of the nbf files
by entering the following commands at the command prompt:

xda2nbftool -x NK.nbf NK.nba 0x20040304
xda2nbftool -x Radio_.nbf Radio_.nba 0x20040306


2. Modify the operator ID in the nbfs to the value you require
by entering the following commands at the command prompt
substituting <operator> with the required value:

xda2nbftool -sd PH10 -so <operator> -sl WWE NK.nba
xda2nbftool -sd PH10 -so <operator> -sl WWE Radio_.nba


3. Update the crc values for each of the decrypted files
by entering the following commands at the command prompt:

xda2nbftool -c -u NK.nba
xda2nbftool -c -u Radio_.nba


4. Encrypt the files back into the nbf files by entering
the following commands at the command prompt:

xda2nbftool -x NK.nba NK.nbf 0x20040304
xda2nbftool -x Radio_.nba Radio_.nbf 0x20040306


5. Start your device in bootloader mode by pressing and holding down:

DPad + PowerButton + ResetButton

After a second release ResetButton, then release the rest of them.
Your screen will show word "Serial" at the top.
You are in bootloader mode now.

6. Place your device in the cradle, ensuring that the cradle
is plugged directly into a USB port on your PC and not to a hub
and that the power supply is connected to the cradle.
It is also a good idea to disable any screensavers on your desktop PC.

Once your device is cradled, the text on the screen will change to "USB".


7. Run HimaUpgradeUt.exe (or HimaUpgradeUt_NoID.exe if flashing on any Himalaya other which is from than O2)

8. Sit back and wait for the Congratulations screen to be displayed
on your PC. Your device will still be displaying 'Upgrading radio stack, please wait',
but as long as the PC says it is done, then its all OK.

9. Detach your device from the cradle.

10. Now you have to hardreset your device.
Press ResetButton and hold down CameraButton + RecordButton.
Hold them pressed until the "Boot Options" menu appears on the screen.

Select the options as follows:
(for selecting use RecordButton, change values with CameraButton)

Enable KITL -> NO
Clean Registry Hive -> YES
Format Storage -> YES

When done, press DPad and wait until OS starts.

[Ather]

Hi, I use Windows Vista Altimate and ActiveSync 6.1 the latest version of Microsoft But still "ERROR 101: CONNECTION ERROR". Should I change my Computer OS to XP and use ActiveSync 4.5? Please advise the good idea to me again. Thank so much that supporting me.
Yes U hav to switch To WINDOWS XP..the Installer is not supported for VIsta..or else search the forum..especially on www.buzzdev.net..sum 1 posted a method of flashing On VISTA

[utak3r]

1-Java midlet manager isn't working

Java works pretty well. But not on this midlet manager ;) Try searching for Tao Intent 11.1.7.1034 - it works for me.

2-the notes are read only during the call so u cant save anything in that note

Can't get what are you trying to say... my notes work very well :D

3-the camera zoom isnt working

You guys ain't reading at all... two or three days ago I was talking about this.

5-it eats the battery out

Hm? Haven't noticed.

[help123]

dial up networking want work or not ? by bluetooth pc in this rom ?

[Bingoig11]

Thanks for this great ROM :D
Freshly installed it works perfectly :D

The only problem is regarding the touchflo contained in addon2 :(
Got the message: "cannot be opened. either it is not a trusted certificate, or one of its components cannot be found....try reinsalling ect..."

Any ideas?

[Ather]

read the thread from the 1st page..ull com to know abt it..also read the topic Touch Flo

[Olin]

Maturr suwwuuuunnn mas...

[Maggy]

Not all... May himalaya (O2 XDAII) also shuts at 30%

I drained my Hima (Qtek, radio 1.17) with original battery today, it took me 3 hours 48 minutes, XCPUscalar on 473MHz, bluetooth on, Tomtom constantly calculating routes between all my contacts, switching from time to time to battery status, the last I've seen was below 10%.

[badbadtz.carlo]

I drained my Hima (Qtek, radio 1.17) with original battery today, it took me 3 hours 48 minutes, XCPUscalar on 473MHz, bluetooth on, Tomtom constantly calculating routes between all my contacts, switching from time to time to battery status, the last I've seen was below 10%.

hi Maggy,

wow! 4hours! nice!
i'll try to change to radio 1.17.. let me see if i can manage to stay up beyond 29%...
if anyone has already tried it, stop me now! :D

i flashed back to Helmi's wm5 yesterday (to try touchflo... not satisfied yet... i'll wait for it to work on WM6), played all my songs on WMP til battery died down.. (didn't wait that much since i slept half of the time.. hehe) and last i've seen it was 9% when it died...

im using original 1200mah..batt..

also, i dont have that much apps installed... but i noticed that screen becomes misaligned.. any thoughts what wud cause it? never had a problem before...

[silverseila]

To Maggy
Thank So much that reply me.
But now I changed my computer OS to Win Xp and ActiveSync 4.5 and completed upgrade my xdaII. But Something are uncomfortable like as:

1-Storage's too small: I try to make BigStorage by using extendedromunlocker, Hima_DOC_Tool_1.0 and Hima_DOC_Tool_1.0 Step by Step but it show me "Debug Error" while I Unhide and Unlock Exten_Rom.

2-RamDisk can't store programs: Can't Completed seting program to store in RamDisk. just show me set to other storage.( RamDisk free space=33MB )

3-Itent MIDlet deosn't work: Can't set up ItentMIDlet.

4-Camera: No interface like as before when take a pictures.

However, I'm so thank to you for ur any idea to me.
Sorry for my bad english and Low knowlegde about Technic in this.
Hope get good Ideas again from you.

[nesty24]

I have this system info of my himalaya (O2XDAII)

Program memory - 61.3MB (24.93mb use)
Storage Memory - 30.5MB (15.33mb in use)
RAMdisk - 32MB - (19.07 in use)

I think that program memory + RAMdisk makes 128 mb, right?
But mine, is only 93.3MB in total. Is it normal?

[sliderstrain]

Java works pretty well. But not on this midlet manager ;) Try searching for Tao Intent 11.1.7.1034 - it works for me.



Can't get what are you trying to say... my notes work very well :D



You guys ain't reading at all... two or three days ago I was talking about this.



Hm? Haven't noticed.

can u upload Tao Intent 11.1.7.1034 or give me a working link for it please

[Jhovie]

Helmi_c, U R the Best....
Thanks for this stuff...:)

[utak3r]

I think that program memory + RAMdisk makes 128 mb, right?

No.
RAM + RAMDisk + PagePool. You have 32MB of page pool...

[Maggy]

1-Storage's too small: I try to make BigStorage by using extendedromunlocker, Hima_DOC_Tool_1.0 and Hima_DOC_Tool_1.0 Step by Step but it show me "Debug Error" while I Unhide and Unlock Exten_Rom.

2-RamDisk can't store programs: Can't Completed seting program to store in RamDisk. just show me set to other storage.( RamDisk free space=33MB )

3-Itent MIDlet deosn't work: Can't set up ItentMIDlet.

4-Camera: No interface like as before when take a pictures.

1. You should very carefully follow the instructions. Take care that unlock/unhide is installed on /device, not ramdisk or storage card. Do a soft reboot after each individual step. I can do it and I'm a newbie like you.
2. Lots of programs have hard coded install paths in their cab files, they never install to Ramdisk. Too bad, no solution. Some do allow to set paths after installation, sometimes through a menu(often hidden too deep in optios), sometimes you even need to edit the registry (CAREFULLY). To be on te safe side always first COPY the files to the new path, change settings, then see if everything still works after deleting the files from the old path and don't forget to soft reboot.
3 I have no idea what that midlet is but I believe I've read that you need Tao Itent, see some other posts in this thread
4 I don't like the camera interface either, but it does take pictures... When you get used to it, it actually works easier than the old interface

[m1k3_3]

Totally perfect...
But earlier version, it has xBackup program.
Where I can found xBackup in WM6?
Need advice please

[utak3r]

Totally perfect...
But earlier version, it has xBackup program.
Where I can found xBackup in WM6?
Need advice please

Do search for PPC PIM Backup - it's the best IMHO backup app currently (at least in 2.5 version, earlier ones were not so good).

[Bingoig11]

read the thread from the 1st page..ull com to know abt it..also read the topic Touch Flo

Sorry I didn't see in the 1st page :p

But now I've big problems with storage...I had a look on different tools but none of these is able to resize the Storage to more than 31Mb...I already this size in my storage, is there a way to increase it to 60Mb for example, instead of having 60Mb for Programs?

[m1k3_3]

Do search for PPC PIM Backup - it's the best IMHO backup app currently (at least in 2.5 version, earlier ones were not so good).

PPCPIMBackup cannot back-up "all data" like xBackup do.
Any idea?

[utak3r]

is there a way to increase it to 60Mb for example, instead of having 60Mb for Programs?

Nope. Hima has 64MB of ROM (of which 30 is OS, 30 is storage (after joining with ExtROM) and 4 is radio), and 128MB of RAM - which you cannot use for storage... just use it as a RAMDisk :D

[utak3r]

PPCPIMBackup cannot back-up "all data" like xBackup do.
Any idea?

What do you mean by "all data". There's an option of adding your custom files to backup.
I haven't use xBackup... did it exist on wm5? If so, probably it could be used under wm6... :)

[Bingoig11]

Nope. Hima has 64MB of ROM (of which 30 is OS, 30 is storage (after joining with ExtROM) and 4 is radio), and 128MB of RAM - which you cannot use for storage... just use it as a RAMDisk :D
Damned :mad:
Ok so what I don't understand is the storage space called Programs which is 60Mb and whenever I install a new program (or an addon from the 1st page) the space is taken from storage and not programs :(

[Malder78]

PPCPIMBackup cannot back-up "all data" like xBackup do.
Any idea?

Best Backup program this SpbBackup

[utak3r]

Best Backup program this SpbBackup

erm... but this software is not free. And you've posted what?... :confused:

[Malder78]

erm... but this software is not free. And you've posted what?... :confused:

Program with serial number

[Maggy]

Damned :mad:
Ok so what I don't understand is the storage space called Programs which is 60Mb and whenever I install a new program (or an addon from the 1st page) the space is taken from storage and not programs :(

On your desktop computer you have:
BIOS ROM
VGA ROM
RAM
Video Ram
cache RAM hardware on motherboard, on harddisk, in processor...
Ordinary RAM controlled by your OS as cache
Storage (harddisk, CDROM etc)
virtual RAM on storage
You can compare the BIOS ROM more or less with the ROMs being cooked and shared here.
The pagepool is being used by your Hima just to speed things up, just like the different kinds of cache on your desktop
The storage, Ramdisk and SD card aer just like the storage on your computer. When you install software, no matter if it is on your desktop or pocket device, you write to storage.
The program RAM is where the programs actually run, load their data, create screen output and receive input from buttons, touchscreen, radio, camera and so on, just like the RAM in your desktop.
Actually we're not so different from computers, we use storage for books, dictionaries, filing papers, photo albums, the lot. And we have our active RAM in our heads.

[panda2020]

I found that when I tried to install softwares in xda II with WM6 (Tofclock), even I choose the ram disk as the destination but it finally installed in the main storage! why?

[Totzkie]

Best Backup program this SpbBackup

uh, is this allowed here?

[dyrana]

Dear Helmi,

Thanks a lot before,
but , after I install in my XDA II :
1. Activesync with my desktop doesn't work,
2. My radio version still in 1.08.00 version,

Help me to correct,

[utak3r]

1. Activesync with my desktop doesn't work

What OS do you have? Maybe a Vista?...

2. My radio version still in 1.08.00 version

You have to flash it separately, on your own. TofClock AKU0.7.0 is an OS only.
Have a look here:
http://buzzdev.net/index.php?option=com_remository&Itemid=132&func=select&id=26

[xda2jojo]

uh, is this allowed here?exactly not allowed
xda-dev front page posted it not allowed...
http://www.xda-developers.com/modules.php?name=News&file=showarticle&threadid=312903

Malder78 next time you post link any sw with serial...i'm gonna ban you forever...

[help123]

Dear Helmi,

Thanks a lot before,
but , after I install in my XDA II :
1. Activesync with my desktop doesn't work,
2. My radio version still in 1.08.00 version,

Help me to correct,


you need to instal activesync 4.5
here go and download

http://www.microsoft.com/windowsmobile/activesync/activesync45.mspx

[Maggy]

you need to instal activesync 4.5
here go and download

http://www.microsoft.com/windowsmobile/activesync/activesync45.mspx

He already flashed, so he has activesync 4.5. His problem is that he didn't read the instructions and didn't activate usb in settings>connections.

And he doesn't know that there are 3 rom files you can send, either all at once, or one by one:
nk.nbf (operating system rom possibly with extras)
ms.nbf (extended ROM, my advice: don't)
Radio_.nbf (finally a file with a simple name)
HimaUpgradeUt sees which roms are available in the same directory and burns these. So you can switch radios as much as you want. But I advice: if it ain't broken, don't fix it.

cheers

[help123]

Dear Helmi,

Thanks a lot before,
but , after I install in my XDA II :
1. Activesync with my desktop doesn't work,
2. My radio version still in 1.08.00 version,

Help me to correct,

i dont know which help u wana any way i wil try myself ok first download this file
http://rapidshare.com/files/54515266...M6_AKU.0.7.rar

and UNZIP it like you saved it in computer D dvice ok then Start your device in bootloader mode by pressing and holding down:
DPad(its look like joystik) + PowerButton + ResetButton
After a second release ResetButton, then release the rest of them.
Your screen will show word "Serial" at the top.
You are in bootloader mode now. conect your USB data cable with your PPC and computer after then click on TofClock_HIMA_WM6_AKU.0.7.exe then 3. Hard reset your pda.
Press ResetButton and hold down CameraButton + RecordButton.
Hold them pressed until the "Boot Options" menu appears on the screen.

Select the options as follows:
(for selecting use RecordButton, change values with CameraButton)

Enable KITL -> NO
Clean Registry Hive -> YES
Format Storage -> YES

When done, press DPad and wait until OS starts.
Done.
you can download also addon here
http://rapidshare.com/files/54522750/AddOn2.rar

[help123]

He already flashed, so he has activesync 4.5. His problem is that he didn't read the instructions and didn't activate usb in settings>connections.

And he doesn't know that there are 3 rom files you can send, either all at once, or one by one:
nk.nbf (operating system rom possibly with extras)
ms.nbf (extended ROM, my advice: don't)
Radio_.nbf (finally a file with a simple name)
HimaUpgradeUt sees which roms are available in the same directory and burns these. So you can switch radios as much as you want. But I advice: if it ain't broken, don't fix it.

cheers

no there no need usb in settings>connections its wil not work upgrading time only he need what i wrote i think if he unerstand then ok otherwise what we can say ? do not take risk

[appelton]

Is WM6 gonna work on Qtek2020i ?

[MichaelBrandi]

I think you have a problem with your battery or unit, my device never shuts downl like this, it runs until there is almost no battery left.

[MichaelBrandi]

Is anyone sucessfully using this on this new WM6 ROM, On my device Garmin QUE keeps switching between Acquireing Sattelit Info, and searching COMX, it never gets beyond that. I can se it's linked to GPSProxy, because I can se what sattelites it's detected from my Bluetooth unit.

Thanks,

Michael

[utak3r]

I think you have a problem with your battery or unit, my device never shuts downl like this, it runs until there is almost no battery left.

Same here. Today I was talking, having 18% of battery :D and no quality dropoff.

[Maggy]

no there no need usb in settings>connections its wil not work upgrading time only he need what i wrote i think if he unerstand then ok otherwise what we can say ? do not take risk

I do not understand this reaction at all. First of all what risk might who take? Secondly the initial post says:

Originally Posted by dyrana
Dear Helmi,

Thanks a lot before,
but , after I install in my XDA II :
1. Activesync with my desktop doesn't work,

AFTER he (already, sucessfully) installed the ROM on his XDAII, his ActiveSync was no longer working, this indicates that he did not set
Settings>Connections>USB to PC>enable advanced network functionality.

There is absolutely nothing wrong with my understanding of his English. It is your English that I do not understand. Now back on topic please.

[Maggy]

Same here. Today I was talking, having 18% of battery :D and no quality dropoff.

Even with my battery meter fully in the red and my CPU clocked down to 200 MHZ I'm still able to make a call. Sound quality isn't very good, I don't know if it is because of lack of power for radio or too few clockticks. Battery life is however great. XCPUscalar is worth buying or at least trying. I also tried PocketHackMaster, gives better result on extreme speed, switches smoother between speeds, but less stable and less battery life.

[help123]

lol i thought he wana know how to upgrade its k

[SaBo]

Is WM6 gonna work on Qtek2020i ?

No, there isn't even a working WM 5.0 version for this device.

Sascha

[thunderpuma]

On your desktop computer you have:
BIOS ROM
VGA ROM
RAM
Video Ram
cache RAM hardware on motherboard, on harddisk, in processor...
Ordinary RAM controlled by your OS as cache
Storage (harddisk, CDROM etc)
virtual RAM on storage
You can compare the BIOS ROM more or less with the ROMs being cooked and shared here.
The pagepool is being used by your Hima just to speed things up, just like the different kinds of cache on your desktop
The storage, Ramdisk and SD card aer just like the storage on your computer. When you install software, no matter if it is on your desktop or pocket device, you write to storage.
The program RAM is where the programs actually run, load their data, create screen output and receive input from buttons, touchscreen, radio, camera and so on, just like the RAM in your desktop.
Actually we're not so different from computers, we use storage for books, dictionaries, filing papers, photo albums, the lot. And we have our active RAM in our heads.

First of all I have to commend you guys on an excelent job, not only is the ROM beautiful, but it is blazing fast and very stable.

now to the topic above.The explanation is fine and very understandable, but it still doesn't explain why you cant install programs to the memory card :confused: . As much as i love this ROM and the addons that are with it, as much as i am frustrated with the fact that I cant install anything else because the storage fills up very quickly. any clue on how to get around this?

i also tried to resize, repartition, the storage using the tools explained earlier. I first tried to unlock the extended ROM on my Himalaya, but it didnt work. although i am a newbe to this forum, but i pride my self of being a person who follows directions down to the dot. When i tried to unhide the ROM is sayed that it is successful. soft reset and the ROM is still hidden. so i try to unlock thinking that maybe the explorer, or me :o, is blind, but I get a lot of debug errors, then a message that says that the ROM is unlocked. i try to resize hoping that it will, and it says that the repartition is sucessful. but again nothing :(( any ideas? I also tried the previous doing a hard reset rather than soft.

btw, sorry for the long post

[allen03]

thanks for your great work , but does it possible to upload some useful program that come with WM5 version.

thanks again

Allen

[Maggy]

...hoping that it will, and it says that the repartition is sucessful. but again nothing :(( any ideas? I also tried the previous doing a hard reset rather than soft.

btw, sorry for the long post

When you get the message repartition successfull, that is just what it means. Congratulations. You added about 15MB to the RAMdisk, that was originally about 15MB so now you should have about 30 MB RAMdisk. You can store a lot there. It is however not the kind of storage you want.

There is a commercial solution to transport installed software from storage to RAMdisk. It's called PocketMechanic from http://www.wizcode.com/

Or you can manually copy and paste files but you should know what to move and where to find it. Additionally you'll have to edit the registry if you know where to find the keys and you'd have to edit the shortcuts. Not an easy job I can tell you, and with no guarantee to success.

But it would be much wiser to be very selective on what to install and what not to. Without moving anything I have 17 programs installed and still 14MB storage free. Do you want to tell us what's clogging up your storage?

[Maggy]

thanks for your great work , but does it possible to upload some useful program that come with WM5 version.

thanks again

Allen

I'd love to give you a list of available downloads but there are too many. You'll have to search the board for your specific wishes.

[Maggy]

No, there isn't even a working WM 5.0 version for this device.

Sascha

Never paid any attention to the other devices but this surprises me. Found out today that for Wallaby there is no WM5 either. Am I glad that I picked exactly the right ones?

[temumangga]

can u upload Tao Intent 11.1.7.1034 or give me a working link for it please

Tao Intent works for me too
I found the link to tao intent here (http://4pda.ru/forum/attach/872791/TAO_JMM_11_1_7_1034_WM5_Communicator_by_dFine.cab)

[grande]

First of all thanx Tofclock and helmi for this wonderfull rom.....

After upgrading my hima, i love the rom very much. I install this batti applications that i downloaded @ ipmart forum and install it in my ram memory. then i configure the battery to be dead @ 10%. and im very happy that it also works like a charm on this rom. by the way my radio is 1.08.

[levels]

First of all thanx Tofclock and helmi for this wonderfull rom.....

After upgrading my hima, i love the rom very much. I install this batti applications that i downloaded @ ipmart forum and install it in my ram memory. then i configure the battery to be dead @ 10%. and im very happy that it also works like a charm on this rom. by the way my radio is 1.08.

what version batti you use ?

TQ

[Skrylten]

Here is a stupid (?) question from a newbie...

How do I install the addons ?

/Skrylten

[Rudegar]

2ways to install programs on pda
1 is as exe files on the pc which use activesync to sync cab files to the pda and run them
2 is to run the cab files oneself on the pda

[Skrylten]

Thx for the fast reply, Rudegar !

/Skrylten

[The_hesham]

First of all thanx Tofclock and helmi for this wonderfull rom.....

After upgrading my hima, i love the rom very much. I install this batti applications that i downloaded @ ipmart forum and install it in my ram memory. then i configure the battery to be dead @ 10%. and im very happy that it also works like a charm on this rom. by the way my radio is 1.08.

Dear grande
1-Which ver
2- f it is free upload it pls
3- Do u mean that by this software u can control the device to be working at any level!!. Please explain more

Regards

[utak3r]

Congratulations. You added about 15MB to the RAMdisk, that was originally about 15MB so now you should have about 30 MB RAMdisk.

Ummmm..... RAMdisk? :p
It's a storage, not a RAMdisk.

One can have even 72MB RAMdisk... it's only up to you, it's just it takes away program memory (RAM).
You can install your applications to storage, to RAMdisk and to storage card. If some app don't want to install itself into your chosen location, it's this app's problem.

[NxJay]

Question. Why can't you send/receive files using the bluetooth stack in this ROM? Trying to send some files from my mac to my XDA using BT but the mac's claiming my device doesn't have the necessary services. (File transfer used to work fine on 2K3 with widcomm and 2k5 with the crappy MS stack).

I just literally finished setting everything up on my phone after flashing this ROM so i'm sure y'all can understand my frustration at finding out bluetooth is sub-standard.

Any chance of including/posting a link to a better bluetooth stack (possibly a widcomm one)?

On a brighter note, this ROM is actually pretty cool. I'm liking the new WM6 features. There's a few typos in the "performance" app in controlpanel but other than that, it's all good!

EDIT: BT FTP doesn't work if the phone screen's off (done using TCPMP) or in standby mode with BT active (why is this? It used to work in widcomm.).

If the phone's on and the screen is active, BT FTP works okay....its just a major battery drain if you're transferring something big and you disable standby (but forget to turn it back on)

[wa7eed]

First of all Thanks for This Great Job ...:)
I would like to change size of Storage Memory for this rom to 128mb & Delete Ram Disk, So How Can I Do it:confused: ?


And Finally Thanks

[Ather]

I dnt think u r reading the TOPIC from the 1st page..Take a Tour of the entire topic

[alex_72gr]

I tried to use the internet calling but there was no sound in my end with the voip option.
Why is that?
Thanks

[grande]

batti 2.1. Is it the storage? When I install it I have this option to choose where (storage/ramdisk/storage card) so I install it in ramdisk just like when my hima is on wm5. on my hima I proved that the battery shuts @ 10%. and its stable up to now.

[sunringove]

Today i flash the tofclock wm6.0 rom,it's a best rom i ever saw ^_^
but i found that i use the resco file explorer to view the file in the windows folder is very slowly ,and i open the messagebox is slowly too.
Thank you !

[sliderstrain]

Tao Intent works for me too
I found the link to tao intent here (http://4pda.ru/forum/attach/872791/TAO_JMM_11_1_7_1034_WM5_Communicator_by_dFine.cab)

Thanks temumangga

[utak3r]

but i found that i use the resco file explorer to view the file in the windows folder is very slowly ,and i open the messagebox is slowly too.

So... why not using a free and best app for it then... Total Commander for CE :D
http://ghisler.ch/board/viewtopic.php?t=16509

[sunringove]

I just flash again the wm6.0 rom,this time i feel how quickly the applications run^_^ it's very good ! Thanks all everyone~;)

[alex_72gr]

I tried to use the internet calling but there was no sound in my end with the voip option.
Why is that?
Thanks

[Maggy]

Ummmm..... RAMdisk? :p
It's a storage, not a RAMdisk.

One can have even 72MB RAMdisk... it's only up to you, it's just it takes away program memory (RAM).
You can install your applications to storage, to RAMdisk and to storage card. If some app don't want to install itself into your chosen location, it's this app's problem.

oops, sorry, shouldn't type when I'm too sleepy

[sortlaih]

I would like to thank every one how was involve in this rom; It is very nice rom...

With WM5, there was vibration feature, that when I call some one and he answer the call I feel a vibration, is there any way to add this feature to WM6.

Thankx a lot

[Ather]

I just flashed this rom..my Memory is like this...

Storage:30.53 MB
Program:61.25 MB
RamDisk:31.96 MB

and 1 more thing...how is it possible to remove the POWER meter from the top (beside the clock)

[sortlaih]

Hi

How can configure my SanDisk 256MB+WiFi with WM6..

Thankx in advance..

[utak3r]

I just flashed this rom..my Memory is like this...

Storage:30.53 MB
Program:61.25 MB
RamDisk:31.96 MB


... and? Is it a question? :D

[grande]

Dear grande
1-Which ver
2- f it is free upload it pls
3- Do u mean that by this software u can control the device to be working at any level!!. Please explain more

Regards

Thats exactly what it does!!! ill try to post the app and some screenshots that will do the talking...

[Ather]

... and? Is it a question? :D

No.its not a question..i just posted it..my hima isnt charging via USB..help

[The_hesham]

Thats exactly what it does!!! ill try to post the app and some screenshots that will do the talking...

Please do
Appreciated

Regards

[sortlaih]

Hi

Can we Add Revolutionary TouchFLO Platform from HTC

\Regards

sortlaih

[temumangga]

Dear grande
1-Which ver
2- f it is free upload it pls
3- Do u mean that by this software u can control the device to be working at any level!!. Please explain more

Regards

You can find the program in its website, you can download and also see the screenshot here http://pda.jasnapaka.com/batti/

[wyao840316]

Thanks Helmi_C!!
!!!!

[nebondkiev]

why I cannot connect trough active sync?
My version is 4.5 is there any newer version?

[utak3r]

why I cannot connect trough active sync?

1. What ROM version?
2. What PC OS version?
3. Did you checked "Advanced communication" in USB-To-PC config window on?

[philipshero]

How to download the WM6 Soundfix? Anyone show me? Tks a lot!

[Olegas]

I wonder if notification bug was already solved.Mean eq SMS and Missed calls never had red LED flashing?

[NxJay]

I wonder if notification bug was already solved.Mean eq SMS and Missed calls never had red LED flashing?

They work fine for me. (In fact, they wouldn't turn off till i reset. Then i hard reset, cleared registry & storage & everything was back to the way it shoulda been.)

Anyone got any comments/answers regarding my bluetooth question on the previous page?

[rockerz]

is there other places to dl this
i cannot dl

[utak3r]

Question. Why can't you send/receive files using the bluetooth stack in this ROM?

EDIT: BT FTP doesn't work if the phone screen's off (done using TCPMP) or in standby mode with BT active (why is this? It used to work in widcomm.).


So... is file transfering working for you, or not? Or you meant BT FTP? I'm asking, 'cause file transfer is not the same, as FTP... The normal everyday BT file transfering is known as OBEX.

As for the standby thing... you know, if the screen is off, all the system is off, I mean some very few processes are working. Do you want transfering in this mode (which I doubt it's possible) or you want to wake up your device from this state on file incoming?...

[utak3r]

is there other places to dl this
i cannot dl

Download what?...

[tsang_ron]

Actually, thank you so much for those valuable effort.ThX...

[temumangga]

How to download the WM6 Soundfix? Anyone show me? Tks a lot!

WM6 Soundfix is included in the rom file. You can download it from the links in the first post. If you have difficulties with rapidshare, etc you can download it from direct link in http://cangkrep.com :)

[temumangga]

is there other places to dl this
i cannot dl

If what u meant is that u have difficulties in downloading from the mirrors in the first post, u can download it in http://cangkrep.com. It's direct link ;)

[AldoWeb]

Thanks for this great work.

I searched in this thread but it seems impossible to find on 39 pages:
How can we change the ram disk size to 0 and make the program memory 128 Mb

Thanks in advance

[SaBo]

How can we change the ram disk size to 0 and make the program memory 128 Mb

Use kitchen version from other sticky post.

Sascha

[The_hesham]

Thanks for this great work.

I searched in this thread but it seems impossible to find on 39 pages:
How can we change the ram disk size to 0 and make the program memory 128 Mb

Thanks in advance

http://forum.xda-developers.com/showthread.php?t=279927

It is 4 WM5 but it Ok with WM6

and the kitchen is here

http://forum.xda-developers.com/showthread.php?t=331637

[rockerz]

not working
rapishare megashare and mediashare not working

can use esnips
http://www.esnips.com/
its more reliable
tons and tons of goodies , yeah

[utak3r]

How can we change the ram disk size to 0 and make the program memory 128 Mb

You can't have program memory = 128MB. It would mean you set page pool = 0 - it's impossible.

And the RAMDisk itself is easily set in registry, but I've never tried if it requires HR. If so, you couldn't do it without changing your ROM image and reflashing.

[mindwar]

anyone having problems with sharing internet to they're PPC via activesync and they're desktop's internet connection?
upgraded from wm2003 and i can't seem to get any app to connecto to the internet when docked.
using this ROM an o2 XDA II, win xp, active sync 4.5.
under usb to pc, enable advanced network is checked and under connections->advanced my work network is selected.

[utak3r]

anyone having problems with sharing internet to they're PPC via activesync and they're desktop's internet connection?
upgraded from wm2003 and i can't seem to get any app to connecto to the internet when docked.
using this ROM an o2 XDA II, win xp, active sync 4.5.
under usb to pc, enable advanced network is checked and under connections->advanced my work network is selected.

You know... posting the same question in two threads is not a good idea :rolleyes:

[AldoWeb]

http://forum.xda-developers.com/showthread.php?t=279927

It is 4 WM5 but it Ok with WM6

and the kitchen is here

http://forum.xda-developers.com/showthread.php?t=331637

Thanks

I used not to be such a noob but time has passed since i cooked my ROM's and I thought things had changed since then especially with wm6

[AldoWeb]

You can't have program memory = 128MB. It would mean you set page pool = 0 - it's impossible.

And the RAMDisk itself is easily set in registry, but I've never tried if it requires HR. If so, you couldn't do it without changing your ROM image and reflashing.

I was meaning to make PM 128 and 32 from that to pagepool so the real PM is 96.
Anyway my Goal was to eliminate the RAMDisk

[utak3r]

Anyway my Goal was to eliminate the RAMDisk

Ah so.
Anyway, you set RAMDisk in [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\RAMDisk] - for 0MB it would be:


"Size"=dword:00000000
"Address"=dword:98000000


but I really don't know if it requires HR, or not. Try and tell us, if after a soft reset it changed. :D

[levels]

First of all thanx Tofclock and helmi for this wonderfull rom.....

After upgrading my hima, i love the rom very much. I install this batti applications that i downloaded @ ipmart forum and install it in my ram memory. then i configure the battery to be dead @ 10%. and im very happy that it also works like a charm on this rom. by the way my radio is 1.08.

before i use Batti , my Hima dead at 30% battery
after i use Batti v2.1 my Hima Dead At 15% Battery
my radio is 1.19

at first i install in my device and not good
then i try install in RAM , work perfectly

TQ grande for your info :)

[cychiam]

Would someone be kind enough to put up another mirror (other than rapidshare and megaupload) that is more friendly to download?
Thanks a zillion.

[The_hesham]

Ah so.
Anyway, you set RAMDisk in [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\RAMDisk] - for 0MB it would be:


"Size"=dword:00000000
"Address"=dword:98000000


but I really don't know if it requires HR, or not. Try and tell us, if after a soft reset it changed. :D

Wn u make HR the rigistry formated (No, Yes & Yes)
Try 2 make (No, No & Yes) wn HR
If not
The only way is through kitchen, I think

[The_hesham]

Would someone be kind enough to put up another mirror (other than rapidshare and megaupload) that is more friendly to download?
Thanks a zillion.

See posts 385 & 386

[utak3r]

Wn u make HR the rigistry formated (No, Yes & Yes)
Try 2 make (No, No & Yes) wn HR
If not
The only way is through kitchen, I think

Good point, I've forgot to say it :D

[The_hesham]

before i use Batti , my Hima dead at 30% battery
after i use Batti v2.1 my Hima Dead At 15% Battery
my radio is 1.19

at first i install in my device and not good
then i try install in RAM , work perfectly

TQ grande for your info :)

I tryed it
batti setting
Low level 20% , Critical 10% & power off 5%
Installation on device or Ramdisk no defferance
The result, Mobile powered off at 30 % batttery level
It did not help

Is there is any ideas?

[The_hesham]

You can find the program in its website, you can download and also see the screenshot here http://pda.jasnapaka.com/batti/

No change Device power off at 30% battery level

Thanks any way

[utak3r]

Hm, today I've found an article from MS MVP man, that Microsoft is forcing OEM makers to build in such things, like forcing to shutdown at around 20-40% of batt... So, probably this particular problem is dependent on what exactly device we have...

As for me, I have a Qtek 2020 - it's made directly by HTC...

BUT - you didn't had such problems with WM5 nor PPC2003, did you?

[Olegas]

I tryed it
batti setting
Low level 20% , Critical 10% & power off 5%
Installation on device or Ramdisk no defferance
The result, Mobile powered off at 30 % batttery level
It did not help

Is there is any ideas?

Actually, if you DON'T SWITCH OFF device, it works up to 5% or 10%, whatever you set in Batty, but if switch off, then it stops working at 30 or 40%

[The_hesham]

Hm, today I've found an article from MS MVP man, that Microsoft is forcing OEM makers to build in such things, like forcing to shutdown at around 20-40% of batt... So, probably this particular problem is dependent on what exactly device we have...

As for me, I have a Qtek 2020 - it's made directly by HTC...

BUT - you didn't had such problems with WM5 nor PPC2003, did you?

Status with WM5
Radio 1.17 & 1.19 device turn off at battery level 50%
Radio 1.14 device turn off at battery level 30%

Same with WM6

I don't remember WM3

[utak3r]

Status with WM5
Radio 1.17 & 1.19 device turn off at battery level 50%
Radio 1.14 device turn off at battery level 30%

Same with WM6


So... either it's somewhere in Button, or in Radio.
I didn't test it at other versions (as I have it connected almost all the time at office), but I've tried it with my current 1.18 - and I was talking at 16% :D
So, you could try 1.18. If it won't work... well, I wouldn't change the Button ;)

[cychiam]

See posts 385 & 386

Thanks!
How could I have missed it. THought I have scanned through the entire thread!

[Bingoig11]

Hi,

Do you think it's possible to integrate or to have the comm manager like that:

http://www.directupload.com/files/kzyngnzeo22thtlzfm5d.png

I found an 8 buttons on this forum but once installed my SPV M1000 (Qtek 2020) tells me that he's able to manage only 7 functions. :(

Thanks :D

Edit: I picked up this screenshot in Trinity forum :)

[NxJay]

So... is file transfering working for you, or not? Or you meant BT FTP? I'm asking, 'cause file transfer is not the same, as FTP... The normal everyday BT file transfering is known as OBEX.

As for the standby thing... you know, if the screen is off, all the system is off, I mean some very few processes are working. Do you want transfering in this mode (which I doubt it's possible) or you want to wake up your device from this state on file incoming?...

Haha, oops. My bad. I meant OBEX.

I'll be honest, either option (transferring when device is in "standby" or waking device up on incoming) would be great. Hell, i'd be happy with a few more customisable options as well (profile switch-etc). TBH i'm a bit of a fan of the customisability of the widcomm stack and really miss the "freedom" it provided. MS's version just feels too crippled.

BTW, BT between my XDA and another phone doesn't work at all. Both phones set to discoverable and on but the XDA denies the incoming request. The only message i get on the phone is that the file transfer has failed.

Anyone else experienced this? I'd really like to get bluetooth working at it's full capacity again as soon as if possible. Without wifi, BT's all i really have to move stuff around on the go.

[utak3r]

Do you think it's possible to integrate or to have the comm manager like that

I think it is possible :p :D

[utak3r]

MS's version just feels too crippled.

It's not a matter of feeling... it's a fact :(

BTW, BT between my XDA and another phone doesn't work at all. Both phones set to discoverable and on but the XDA denies the incoming request. The only message i get on the phone is that the file transfer has failed.

Ok, yesterday I've found a phone which couldn'r connect to my Hima, it was Sony Ericsson. All others I tried can do that, fortunately. Strange :confused:

As of the other matter... As for now, I didn't found any solution to wake up on BT incoming transfer - but I hope it's possible :)

[The_hesham]

So... either it's somewhere in Button, or in Radio.
I didn't test it at other versions (as I have it connected almost all the time at office), but I've tried it with my current 1.18 - and I was talking at 16% :D
So, you could try 1.18. If it won't work... well, I wouldn't change the Button ;)

Thanks I will try Radio 1.18 and report result

By the way what do u mean by button problem?

[utak3r]

By the way what do u mean by button problem?

Bootloader.
BTW, which bootloader version you have?....

[The_hesham]

Bootloader.
BTW, which bootloader version you have?....

V1.03 this is what apear down the screen after pressing (Soft reset+power+dpad)

I never change it, do u think this could effect battery?

[utak3r]

V1.03 this is what apear down the screen after pressing (Soft reset+power+dpad)

I never change it, do u think this could effect battery?

Well, I don't know. But... it always could ;) I have 1.06.
You know, while it's possible to change it, but it's this only thing that can brick your Hima. Really. Instantly.

Try changing your radio.

[The_hesham]

Well, I don't know. But... it always could ;) I have 1.06.
You know, while it's possible to change it, but it's this only thing that can brick your Hima. Really. Instantly.

Try changing your radio.

I don't know how & from where to change bootloader, can u guid me?

I changed the Radio to 1.18 but my Hima powerd off at 37% also.
So for me 1.12, 1.14 & 1.18 pwer off the mobile at 37%.
RAdio 1.17 & 1.19 Mobile power off at 50%.

[grande]

I tryed it
batti setting
Low level 20% , Critical 10% & power off 5%
Installation on device or Ramdisk no defferance
The result, Mobile powered off at 30 % batttery level
It did not help

Is there is any ideas?

note that my radio is 1.08 and i installed the app into my ram. here are some screenshots. change the extension name to .rar

[grande]

Try to set your bat off level to 10%. try not to set it on 5%(default after installation) and i guess we really cant push its power off level to 5% due to many autorunning apps+network. but 13%-15% off level is much better than 20-30%

[The_hesham]

Try to set your bat off level to 10%. try not to set it on 5%(default after installation) and i guess we really cant push its power off level to 5% due to many autorunning apps+network. but 13%-15% off level is much better than 20-30%

Thaks very much
I will use the attached batti2.1 , make same setting as u mention, but tel me pls how to remove the batti notification that cover the left soft key

[ojebz]

just uncheck the 'show icon' in the batti settings (access via programs) :)

[ojebz]

Thaks very much
I will use the attached batti2.1 , make same setting as u mention, but tel me pls how to remove the batti notification that cover the left soft key

just uncheck the 'show icon in the top' in the batti settings (access via programs) :)

[Bingoig11]

I think it is possible :p :D

Great!!!!! :D
It works perfectly! :D

[dyrana]

Dear Friend,

Do Apologize before if I look so slow understanding,
But, ... when I have already install my XDA II to WM6 Hima 7.0 ....
My XDA can't connect again on my PC, even make the Activesync 4.5
( Appeare on my PC display ... found new device #1, and after it ...
we have to instal that new device with related CD ... ??? )

So ... please teach me to solving this problem , I want my XDA can connect
again to my Desktop PC.


Thanks a lot before,

[The_hesham]

It was working perfectly in c_shekhar ROM
WM2005 AKU3.5 RAMDisk-40MB Pagepool size-24MB for Himalaya
ROM: 3.50c.40CS

Did some manage to make Bluetooth_FTP working?

[gryffin]

i just finish upgrade my XDAII to WM6, but some problem the system asking me to format my storage card before it is readable but when i cancel i can't found the storage card in my notebook. i try to use a card reader to read but still showing need to be format. since i have a back up so i try to format it and install again some software and data. i am installing some software but i can't install it so i restart again. the message pop up again ask for formatting the SD card. Did anyone facing this type of problem? Please advice

Thank you very much.

[alpal]

I downloaded and succesfully installed TOFCLOCK HIMA WM6 AKU.0.7.0
CE OS 5.2.1908 (Build 18508.0.7.0) above to my Qtek 2020

Now I am having problems synchronising Contacts from my PC(win xp) to the Qtek.Till y-day it was fine with WM 5.(Active sync 4.5 latest for xp).Also the rebuild wiped out contacts on qtek(but i still have them o the pc)

Also I found I cannot even add any contact to the Qtek itself.

Anybody had this problem and is there a solution?
(Am a newbie)

[alpal]

I did the format disk and also reg wipe at re-start and now it is fine.

Enable KITL -> NO
Clean Registry Hive -> YES
Format Storage -> YES

It is just my screen was too black and not visible at startup to be able to see the options and do it.

Does anyone have this issue?

[The_hesham]

I did the format disk and also reg wipe at re-start and now it is fine.

Enable KITL -> NO
Clean Registry Hive -> YES
Format Storage -> YES

It is just my screen was too black and not visible at startup to be able to see the options and do it.

Does anyone have this issue?

Do not wory all of us hv the same, this is normal.

[The_hesham]

note that my radio is 1.08 and i installed the app into my ram. here are some screenshots. change the extension name to .rar

I change radio to 1.08 & set batti2.1 as u mention, but no deferance it powered of at 37% bat. lvl

[Ather]

mine is still powered at 10 % radio version is 1.17

Its the same with Tof Hima

[The_hesham]

Some one can tel me what are those prog. from addon2 for

Transcriber_EN
SqlCeMobile_EN

I installed the and I don't find any reason 4 them

Regards

[poke8]

hye..i never thought tht my xda II (just bought a week ago with cheap price) can be upgraded to wm6..cheers for Helmi_c and tofc..God bless u guys!!

anyway, i am newbie..sorry for this stupid question..:)

i've downloaded the files..so for the next step, i have to copy the setup files into my xda II, then do the bootloader..is it??:confused:
do i need to format my previous OS in my xda II??

[Ather]

Hey Hisham..The Tanscriber is an "Input Option" with it u can write text using Stylus..as For SQLCe..its a Programming language..Do a google search by "SQL CE"

[seifeer]

i've installed windows 6 in my dvice,,,the graphics is coOL...thx to helmi n tofclok,,i have aquestion,,my device cannot receive a data (pictures,music) from other device via bluetooth,,but i can send
data files (pctures,music,etc) to other device(phone or smart phone) via bluetooth...before upgrading,,my device can send n revice data via bluetooth..(Wm 2003)
what happened with my device..???
thx.

[Ather]

hye..i never thought tht my xda II (just bought a week ago with cheap price) can be upgraded to wm6..cheers for Helmi_c and tofc..God bless u guys!!

anyway, i am newbie..sorry for this stupid question..:)

i've downloaded the files..so for the next step, i have to copy the setup files into my xda II, then do the bootloader..is it??:confused:
do i need to format my previous OS in my xda II??

Hello poke8..Welcome to XDA-DEVELOPERS..

The Procedure to upgrade :

1.The Most important Step is to Backup ur Data..as its going to Erase every thing..u can use the attached software for backing up
2.Enter Boot loader by Pressing the DPad (DIRECTIONAL PAD) + PowerButton + ResetButton
Now ur screen Should Read "Serial" at top and a version number..mostly 1.06
now attach ur USB the screen should say USB and ur Pc will detect a new device..let it load the drivers and now proceed to the last step
Run the Upgrade Utility (its suitable to Run the NOID one)
Now dnt bother if ur screen looks weird..when the computer Displays CONGRATS screen..ur done..but there is one more step...Disconnect ur Device
Now you have to hardreset your device.
Press ResetButton and hold down CameraButton + RecordButton.
Hold them pressed until the "Boot Options" menu appears on the screen.

Select the options as follows:
(for selecting use RecordButton, change values with CameraButton)

Enable KITL -> NO
Clean Registry Hive -> YES
Format Storage -> YES

When done, press DPad and wait until OS starts.

--------------
U hav to run htis application direct from the POCKET PC after Extracting it

download from here http://rapidshare.com/files/59206399/PPCPimBackupV2.5_wm2005.rar

[Ather]

@seifeer

Dnt worry its a problem wid every one..chk here

http://forum.xda-developers.com/showthread.php?t=333220

[jojotots]

its quite fine for my xda2 running so far so good! no problem from me!... thanks man!..

[M14]

Please any one can tell me how to upgrade my Hima to WM6 through win vista
with regards

[zaidam]

I just upgrade to WM6 from WM5 from c_shekhar.

Why I cannot charge my Himalaya using USB?

[KA Kueh]

Hi,

You should be able to charge. Can your PC detect the XDA via Activesync. This is to see if you have broken the USB connector on the XDA.


I just upgrade to WM6 from WM5 from c_shekhar.

Why I cannot charge my Himalaya using USB?

[thinboon]

I change radio to 1.08 & set batti2.1 as u mention, but no deferance it powered of at 37% bat. lvl

No difference for my XDA II after user batti2.1
The power off approx. 25-26%

The below is info. for my XDAII
bootloader V1.01
radio Rom 1.17
batti2.1

[JardaBar]

Please, Is SIM Toolkit working in this ROM? thx

[utak3r]

Please, Is SIM Toolkit working in this ROM? thx

Unfortunately, no. I haven't seen any working STK since PPC2003SE... :(

[sortlaih]

With me the power off start from 10%.

/Regards

[nesty24]

Unfortunately, no. I haven't seen any working STK since PPC2003SE... :(

Yes! There is! That's why I want to dump the ROM that I'm talking about in the kitchen thread.

[zaidam]

Hi,

You should be able to charge. Can your PC detect the XDA via Activesync. This is to see if you have broken the USB connector on the XDA.

Yes, I can sync with USB . My HIMA show charging in progress but after disconnect from USB, the battery power level much lower than before.

[Ather]

@zaidam

I hav the SAME problem....when i opened up my device i saw that the soldering was loose..so i am re-solding it today..or will change the CHARGING BLOCK to USB Mini (cool)..iam attaching images if u want USB also

[utak3r]

I want to change it to miniUSB, too. But, as you can see, some wire work is needed ;) First, pins are much bigger, and second, the pinout is different. I was resoldering my connector 5 times already ;) it's getting broken while using in a car... but the next time it will get broken... probably I'll change it.

[Ather]

Utak3r chk this post (http://forum.xda-developers.com/showthread.php?t=242772)..it says there that it works well for HIMA..

[Maggy]

I tried this about a year ago. I'm a retired hardware engineer, retired since 1995. I found out that my hands are just a bit too shaky, my eyes are just not good enough and I lack concentration and routine to do a proper and safe job. Fixing a bad contact in the standard connector is much safer and eaier because it's much more stable than those wires to the (mini)USB.

Anyone who wants to try it: beware, do not overestimate your skills. In case of doubt find yourself the help of someone who's experienced and does such things on a daily basis.

[Ather]

well ok..i aint gonna do it my self,i will giv it to a technician

[utak3r]

Utak3r chk this post (http://forum.xda-developers.com/showthread.php?t=242772)..it says there that it works well for HIMA..

Thanks :)
But... I know, how to change it, it's just is not so easy - you have to make a "spider" ;) not just to solder a new connector... that's why I didn't make it till today.

[Ather]

its very strange..i just flashed wm2003 in my device and the charger seems to be working..even though i didnt touch the charging block..YET

[pescaito]

i've installed windows 6 in my dvice,,,the graphics is coOL...thx to helmi n tofclok,,i have aquestion,,my device cannot receive a data (pictures,music) from other device via bluetooth,,but i can send
data files (pctures,music,etc) to other device(phone or smart phone) via bluetooth...before upgrading,,my device can send n revice data via bluetooth..(Wm 2003)
what happened with my device..???
thx.

U Should have the Receive all beams Checked! Hope this helps you solve your problem.

[badbadtz.carlo]

U Should have the Receive all beams Checked! Hope this helps you solve your problem.

im sure he has that checked.. i have the same problem..
motos are fine, but with SE, especially k610i.. i have problem receiving data... :(

[Boukarou]

Hi guys,

I've flashed this on my qtek2020 and the battery monitor doesn't report anything. Except for that the rom really kicks-asses, fast, sober, etc :)

As far as I tested it, only the battery monitor is faulty on my device.

Any idea on how I could get it to work?



helmi_c you are the man !

[Ather]

which rom did u Flash..because the problem u r reporting is with 4.2CS..not this version

[utak3r]

motos are fine, but with SE, especially k610i.. i have problem receiving data... :(

Exactly so. I've experienced the same - from Nokias I'm getting incoming beams, but not from SE phones.

And who is the crap? :rolleyes: :D

[Daanmannetje]

I know it is not in the supported devices list, but do you think it will work on a XDA stealth?

[nesty24]

Exactly so. I've experienced the same - from Nokias I'm getting incoming beams, but not from SE phones.

And who is the crap? :rolleyes: :D

Yeah! Me either.:rolleyes:

[zeroy]

Thanks for that!! I thought my old XDA2 was dead, its working perfect now :)

[M14]

Please any one can tell me how to upgrade my Hima to WM6 through win vista
with regards

[poke8]

Hello poke8..Welcome to XDA-DEVELOPERS..

The Procedure to upgrade :

1.The Most important Step is to Backup ur Data..as its going to Erase every thing..u can use the attached software for backing up
2.Enter Boot loader by Pressing the DPad (DIRECTIONAL PAD) + PowerButton + ResetButton
Now ur screen Should Read "Serial" at top and a version number..mostly 1.06
now attach ur USB the screen should say USB and ur Pc will detect a new device..let it load the drivers and now proceed to the last step
Run the Upgrade Utility (its suitable to Run the NOID one)
Now dnt bother if ur screen looks weird..when the computer Displays CONGRATS screen..ur done..but there is one more step...Disconnect ur Device
Now you have to hardreset your device.
Press ResetButton and hold down CameraButton + RecordButton.
Hold them pressed until the "Boot Options" menu appears on the screen.

Select the options as follows:
(for selecting use RecordButton, change values with CameraButton)

Enable KITL -> NO
Clean Registry Hive -> YES
Format Storage -> YES

When done, press DPad and wait until OS starts.

--------------
U hav to run htis application direct from the POCKET PC after Extracting it

download from here http://rapidshare.com/files/59206399/PPCPimBackupV2.5_wm2005.rar



i'll give a try..hmm..thanks for the guidance ather90!!u r a gr8t helper..:)

[Ather]

@M14

Yes u can upgrade with Vista

1. http://www.modaco.com/RUU-Vista-done-u-t252977.html
2. http://forum.xda-developers.com/showthread.php?t=291723

[Ather]

i'll give a try..hmm..thanks for the guidance ather90!!u r a gr8t helper..:)

I am glad i could help u...if u hav any problem feel free to ask..all r here to HELP

[philJ]

Are there any news on BT Pan Profile?

[The_hesham]

Are there any news on BT Pan Profile?

Sorry wrong post

[utak3r]

Are there any news on BT Pan Profile?

News? BT PAN is working perfect for me :D

Ah... forgot, I have Widcomm stack on my PC... ;) On MS it couldn't work.

[nesty24]

News? BT PAN is working perfect for me :D

Ah... forgot, I have Widcomm stack on my PC... ;) On MS it couldn't work.

How can BT PAN work for us?

[The_hesham]

News? BT PAN is working perfect for me :D

Ah... forgot, I have Widcomm stack on my PC... ;) On MS it couldn't work.

Sorry , but what is BT PAN?

[sortlaih]

HI..

Could some explain to me or direct me to any link , I want to know about what each cap do ,So I can decide weather I add it or not to keep my PDAs' storage free as possible as I can .Because I loosed my storage capacity after applying this nice rom (WM6) in my PDA.


AddOn:
HTC Home With 6 Buttons
HTC Touch Smartdial & Dialpad
HTC Streaming Player (Modded from xplode)
HTC Audio Manager (from xplode)
HTC Network Plug-ins (from xplode)
M$ Live (from xplode)
Arcsoft MMS Client 4.2.8.1 (Modded from xplode) hv an Issue, My bad check bellow link for fix
Voip (from xplode)

AddOn2:
Removed Helps files CAB
Windows Live v10.6.0031.2600
Transcriber_EN
SqlCeMobile_EN

Thankx in advance..

[utak3r]

Sorry , but what is BT PAN?

Personal Area Network over Bluetooth.
On your PC there's a new network created (new network connection) and you have your both devices connected in such a way that every network application (both on PC and PPC) can operate with this connection :)

The most common usage is using your Hima as an internet provider for your PC (for example laptop while in journey).

[zaidam]

Sorry for study question.
I just registered GPRS with CELCOM (MALAYSIA). How can I use to send MMS to others?

[philJ]

What Stack do you use?

I tried the Widcomm often, too ... but the main Problem since WM2005 was, that i cant use my BT Headset and Pan Profile with the same Stack. No Sound.

I want to use the WM6 BT Stack (it supports the PAN Profile) ... the Headset works perfect, but when i pair my Him. with my BT Accesspoint it cannot explore any services form it.

Only a registry Problem or more ... any hints for us Helmi?

[jonijones]

Hi,
does anyone by any chance know, how to merge the extrom and the ramdisk? I already read something about a tool called himadoc but couldn't find it anywhere. if someone could post a link to it please.
Apart from that helmi's rom is working great for me!

[jonijones]

alright everyone, sorry...found it here:
http://forum.xda-developers.com/showthread.php?t=332215

[Akka]

Can anyone help me - i can't find ramdisk and extrom. It happend soon (1 or 2 days) after flashing to wm6 and using doc_tool. I flashed my hima again, did hard reset, used extrom_unlocker and doctool again - nothing changes. What had happened? Now i've got 64 ram\32 page pool.
PS When i change the battarey, time is reset to 01.09.2003.

[Ather]

did u read all the instructions (http://forum.xda-developers.com/showthread.php?t=332215)..let me give u suggestion

flash wm2003..then run DOC tool..then reflash to WM6

u wont have any prob's

[arcquisumbing]

2ways to install programs on pda
1 is as exe files on the pc which use activesync to sync cab files to the pda and run them
2 is to run the cab files oneself on the pda

would the 2577 method still work? I tried and please see the thumbnail for the error. any suggestions?

[Ather]

thats a certification errorr

[arcquisumbing]

Thanks.

So this means 2477 still works. Great! :)

But, certification......I have no idea how to work around it. Too bad. :(

[Bruno Rodrigues]

Hello, I'l been using Tofclock Rom, posted in the begining of this thread. I can say that's the best rom I used until today. Nice work, and a good way to remember Tofclock.
But I Have a doubt. I flashed my device, and I used th "Hima doc tools" to upgrade my Storage memory to 30,53 mb. I installed most of the programs in the Storage card (and some in RamDisk, those like SPB Pocket Plus who need to be fast) but I have only 4.05 mb free. Too low!
I suspect that used memory in Storage is persistent, since it doesn't free when I remove something from the PDA.
1) Is this true?
2) Is any way of increase storage in sacrifice of Ram Disk? To 40 mb, for instance.

Thanks in advance.
And congratulations to those who are working for extending the life span of this good device.
Best regards.

[Maggy]

Most uninstalled software leaves some traces, some even make a mess of your storage. Use File Explorer or even better a tool like Resco Explorer (that can unhide almost any hidden file) to browse your file tree. Or use one of the many tools that clean up your tree.

No, unfortunately the 30.53MB storage is probably the best result we'll ever get from our Hima's.

The good side is that it forces you to keep your device tidy. Yesterday I was near 8MB storage, I cleaned up today, installed even more software and now have 14.77 MB free.

[ciberus]

Hello, I'l been using Tofclock Rom, posted in the begining of this thread. I can say that's the best rom I used until today. Nice work, and a good way to remember Tofclock.
But I Have a doubt. I flashed my device, and I used th "Hima doc tools" to upgrade my Storage memory to 30,53 mb. I installed most of the programs in the Storage card (and some in RamDisk, those like SPB Pocket Plus who need to be fast) but I have only 4.05 mb free. Too low!
I suspect that used memory in Storage is persistent, since it doesn't free when I remove something from the PDA.
1) Is this true?
2) Is any way of increase storage in sacrifice of Ram Disk? To 40 mb, for instance.

Thanks in advance.
And congratulations to those who are working for extending the life span of this good device.
Best regards.

Don't forget the internet cache explorer, if you naviagate the cache takes space of rom, you can change location of pie cache to ramdisk changing register:

[HKEY_CURRENT_USER\Software\Microsoft\Windows\Curre ntVersion\Explorer\Shell Folders]
"Cache"="\RamDisk\Temporary Internet Files"

[Akka]

To ather90: thank you, it's ok now.
There is one more trouble: the contents of ramdisk is erased while i change the battarey. Why, and what can i do with this?

[Ather]

well thats odd..because it shouldnt...did u do a hard reset after re-flashing...

Instructions for Hard-Restting :

Press ResetButton and hold down CameraButton + RecordButton.
Hold them pressed until the "Boot Options" menu appears on the screen.

Select the options as follows:
(for selecting use RecordButton, change values with CameraButton)

Enable KITL -> NO
Clean Registry Hive -> YES
Format Storage -> YES

When done, press DPad and wait until OS starts.

[jojotots]

anyone have mms patch 1 mirror pls... thanks u so much!!!

[Akka]

To ather90: yes, i did. Is it possible that this is a problem with backup battarey - when i change the main batt, time is reset to 01.09.2003.

[jojotots]

now im trying to send a while ago pic tru mms , i configure already my connection, and using mms fixed .cab and mms patch1 .cab

result:
the message stock on the outbox...

some advise thanks!

[zaidam]

1. How to select multiple contact? I remembered that WM5 can do that.

2. What purpose of MS_BluetoothPush.cab on Addon folder.

[Ather]

1st of all...there hasent been any WM6 for our himas which allows us to select multiple contacts

2nd i cant see any "MS_BluetoothPush.cab" in the addon folder,neither in 1 nor 2

[Ather]

@akka
Yes it could be..u can check by changing ur Backup battery

U can find the Disassembling Instruction of Himas here : (if u want to change it ur self)

http://forum.xda-developers.com/showthread.php?t=275788

NOTE: that these instructions are for Changing the speaker..U should follow it to the part till u understand that now u can change the battery

[Maggy]

There is a message I believe in Wiki, with pictures, of how someone was able to short the battery contacts with the battery cover (I believe) causing the device to hard reset with cleared RAMdisk after replacing the battery. Perhaps it's not in the Wiki but in this forum. Anyhow, that's one way to clean RAMdisk and hard reset.
It also happened to me once when I dropped my Hima accidentally from desk to floor. Very scary way of resetting, do not try this at home.

[e.gammieri]

Is possible istall a WM6 Rom on HTC Panda?

[zaidam]

2nd i cant see any "MS_BluetoothPush.cab" in the addon folder,neither in 1 nor 2

I download it from other site (can't remember) since I cannot access the rapidshare. I cannot attached the whole file since file more than 9.0 MB. Anyway, could someone out there can advised me.

Thanks, After google search, I found the multiple contact selector work in WM6.

[zaidam]

Another problem happened here is that phone taking longer time before ringing. The caller has hear 4 to 5 ring before my phone ringing.

[Maggy]

Another problem happened here is that phone taking longer time before ringing. The caller has hear 4 to 5 ring before my phone ringing.

a registry tweak that I found in a tread by AX3L:

HKCU\ControlPanel\Sounds\RingTone0
edit "Script" value to av0pr

On my Hima (with another ROM version than this thread) that value was apw3r. It is more responsive now but there always is a delay between the first ring the caller hears and the first ring the receiver hears. The amount of delay depends on a lot of factors. For example is the caller on a traditional wire network or also mobile? Is he/she on the same network as you? How much traffic is there in the mobile cells that you and the caller are in...

[utak3r]

yeah... how big your ringtone file is?...

[vantroy]

it is perfect room thankx big thankx to Helmi

but how to select multiple contacts of delete all of them
?????

[Maggy]

yeah... how big your ringtone file is?...

Good point, a hifi stereo 30 seconds WAV is not a smart ringtone.
Another pitfall: lots of wav's, mid's, wma's and mp3's are made by amateurs who leave one or two seconds silence at the start of the clip...