Attention Everybody !!!!!!!!!!!!!!!

[biswajitghosh]

FRIENDS help , I think I have the brick of all bricks I followed the wiki step by step including creating and copying the nbh file. I got as far as 70% of image loading and it hung and dropped into recovery mode but could not get passed there. I have tried all forms of reset and do not get passed bootloader screen with Herm100 IPL-1.04 and SPL-2.03. This was a imate jasjam running windows mobile 5.0 to which I tried flashing to the new HTC WWE 6.0 upgrade. I have tried running usb monitor from the link but it just gives me a series of paramters in a notice window and then dops off. I have tried another verison but it is not capturing anything.

I have tried mtty and cant even get the usb> prompt after disabling the usb connect in activesync. Please help as this was a works new unit last month and I have some major explaining to do if I cant get it sorted!
Model: Imate Jasjam
ROM Before Flash: TMO_UK_3.60.110.1_6275_1.50.00.00_108_Test
Radio Before Flash: 1.50
Bootloader Before Flash: Not sure
Flash failed at: 70%
Flashing ROM: Image Vers 3.54.255.3
CID Corrupt: Assume Yes
Radio Corrupt: Assume Yes
No GSM Error: Not got that far
Stuck In Bootloader: Yes
Stuck On Windows Mobile Splash: Not got that far
Can boot into OS: No
Tried mtty command set 14 0: Yes but not getting usb>
Tried wiki problem number 4: Yes dont get passed point 3 as as soon as powers up goes to tri colour screen. Switched from serial to usb with connect of usb cable
mtty info 2 output: cannot run
Current Device Status: unusable
Tried re running install and get error 260 and 294(AFTER 1%)and - Not getting a response from PDA!
I TRIED PB + KITL method .BUT IT FAILED AS I COULD NOT ACTIVATE KITL MODE.I BELIEVE ITS NOT ACTIVATED IN MY PDA.
I SPOKE TO TO IMATE INDIA PEOPLE , THEY REPLIED THAT THE MOTHERBOARD IS TO BE CHANGED , WHICH COSTS 60% OF THE COST OF THE PDA.
CAN ANYONE HELP WITH A BOOTLOADER V2.03 ?
WAKE UP DEVELOPERS .DO SOMETHING.
tHANKS IN ADVANCE.
the output is for :
HTC_Hermes_SIM_CID_Unlock_v3a
And
RUU_Hermes_TMO_UK_3.60.110.1_6275_1.50.00.00_108_T est repectively.

[crazyC]

So no HardSPL before you flashed?

[Madcap180]

You should still be able to get a USB monitor from it.. regardless if the thing has been thrown off the empire state building.

What USB monitor program are you using?

MTTY Set 14 0 I beleive is for a corrupt radio stack, all that does is restore your radio stack to factory form, sounds to me like you have a hybrid brick, which is corrupet or invalid CID coupled along with a corrupt radio stack..

[Olipro]

MTTY Set 14 0 I beleive is for a corrupt radio stack, all that does is restore your radio stack to factory form, sounds to me like you have a hybrid brick, which is corrupet or invalid CID coupled along with a corrupt radio stack..

set 14 0 tells the device to skip to OS boot rather than go to bootloader (opposite of set 14 1)

what we need to ascertain is exactly what bootloader version this guy is running, and then to find out what CID he has from the bootloader.

until we get these both, I think we'll have to "assume" it's fucked.

oh and in future, don't PM me twice, it pisses me off. so consider yourself lucky I've bothered to comment.

[biswajitghosh]

Cmd>

Cmd>info 2
HTCSCDL__001ÄÊìHTCE
Cmd>info 7

HTC Integrated Re-Flash Utility, Common Base Version : 1.51d
Device Name: HERM100, Bootloader Version : 2.03
Built at: Jun 16 2007 01:57:22
Copyright (c) 1998-2006 High Tech Computer Corporation

CPU ID=0x41129200
Main CPLD version=0x5
Upper CPLD version=0x4
Main Board version=0x6


Cmd>info 6
HTCST ÚÈÒHTCE
Cmd>info 5

Cmd>info 4
HTCSCDL__001ÄÊìHTCE
Cmd>info 3
HTCSH
Cmd>set 14 1
Write Nand Success

HTCST ÚÈÒHTCE
Cmd>rtask 32
Command error !!!

Cmd>rtask 28
Command error !!!

Cmd>rtask 8
Command error !!!


lastly it's not KITL enable.