white screen softspl

[alikhan321]

man i am stuckin th whitescreen softspl my phone is on in the background i e i can hear things going on i can alsossyncwith it but i cannot sync via usb just ira what can i do, why can i not syncwith usb ,i cannot sync now cause i cant see screen to activate sync help how to get out of white screen:eek: :eek: :eek: :

[the-equinoxe]

man i am stuckin th whitescreen softspl my phone is on in the background i e i can hear things going on i can alsossyncwith it but i cannot sync via usb just ira what can i do, why can i not syncwith usb ,i cannot sync now cause i cant see screen to activate sync help how to get out of white screen:eek: :eek: :eek: :

on the right side of your device is a little hole.
Your stylus has a pointy end.
Put the pointy end of your stylus into the hole, press softly untill you feel a "click".
Behold, the device reboots.

For future references, its called Resetting a device..

[dferreira]

on the right side of your device is a little hole.
Your stylus has a pointy end.
Put the pointy end of your stylus into the hole, press softly untill you feel a "click".
Behold, the device reboots.

For future references, its called Resetting a device..
LOL nice one Eqx :)

[alikhan321]

i done that it dont work man i need exprt advice help

[the-equinoxe]

i done that it dont work man i need exprt advice help

Soft SPL is put to MEMORY, it's not FLASHED.
Rebooting the device will clear the memory.
Thus removing the sSPL.

Try pulling your battery for a few minutes.
Then put it back again and boot the device.

[alikhan321]

I Took Out The Battery For 1hr Still The White Screen,help
Took Out Sd Card Took Out Sim ???????????

[dferreira]

Press and hold the top left and right sided buttons (Comm + Talk) and hit the reset switch. The screen should turn black, and a request to do a hard format will appear. Press the call button. That should do it ;)

[the-equinoxe]

Press and hold the top left and right sided buttons (Comm + Talk) and hit the reset switch. The screen should turn black, and a request to do a hard format will appear. Press the call button. That should do it ;)

That is the exact same advice I PM-ed him.

[alikhan321]

yes done all that nothing yet just some white screen always on can hear background noices of the phone ,the leds working like normal

[alikhan321]

please help i love my wizard its been 3 days now my coldrx turkey is very hard now

[dferreira]

That's odd... if he can hear the phone start menu going on... maybe you can do it again (use sSPL to flash another ROM). Maybe that will work?

[the-equinoxe]

Could it have something to do with DROPPING HIS PHONE (http://forum.xda-developers.com/showthread.php?p=1425061#post1425061) instead of the sSPL?
Because the sSPL isn't flashed as I said many times before, it is in MEMORY, not flash..

[alikhan321]

i put the new screen in same white screen tested the screen in mda(pic inclosed) so nothing to do with screen
any more ideas

the screen is fine howcan i switch white screen off

[alikhan321]

the more you know.....http://www.mdatweak.com/downloads/Wizard_Service_Manual.pdf

[spayker]

make hard reset and then
contecet with ubs and use the SPL again.
its happend to me and i did what i wrote and its worked....

[Zpyro]

I'm in the same boat! My Wizard is in the stuck white screem as well.

[the-equinoxe]

I'm in the same boat! My Wizard is in the stuck white screem as well.

could you give us more details?
-device (G3/G4)
-what you did (exactly) before you got this white screen.

[Zpyro]

It is a 8125 (G4) that is unlocked.

I created a ROM from one of the kitchens, and flashed it ... White Screen.

[Zpyro]

WOO HOO!!! GOT IT!!!

Steps to recovery:
1. Fully charge your phone (VIA Power Cord ... NOT USB)
2. Get the phone to bootloader (three color mode) - by soft resetting and holding the camera button at the same time
2. Connect it to the computer (Windows XP) with a USB cable
3. You will notice "USB" written in a lower corner of the phone (this means it is connected)
4. Download your providers ROM (The "real" rom provided by Cingular/ATT). You can get the one for the 8125 from HTCAmerica here: http://www.htcamerica.net/support/8125/software-downloads.html
5. Stop ActiveSync (from Task Manager)
6. Run the program downloaded in step 4. This will reflash your phone with the ROM. This seems to be the ONLY WAY possible to reload a ROM from BootLoader.

Enjoy!