need some help

[mi4]

hello,
I've tried to install skype ona my cingular 2125 and now it doesn't work.
the phone just stuck on .cab extractin screen and i restart it.now the only thing it show is the cingular startup screen and that's all.I have the cingular rom update uttility but it says that the device is not connected to the pc using usb,and ask me to check the connection.
what i can do about this issue?can anyone help me?
thank you in advance

[Exitao]

Try turning off USB connection in activesync. With the phone turned off, if you hold the camera button when you plugin the usb to phone (already connected to PC), it should start up in the bootloader.

Other method to get the bootloader is to hold the camera and the comm manager button and turn on the phone.

You should be able to use the ROM update utility with the bootloader.

Look at Karhoe's guide in the stickies at the top of this forum...

[Qlphn]

Maybe hard reset will be enough ? :)
Turn off Your phone. Press and keep hold of both soft keys, press the power button for approximately 0.5 to 1 second, phone will ask U if U are sure, press 0.

hard reset is a lot safer than reflash...

[mi4]

thank you for all the advises but unfortunateli non of them helps.I've trie everything and it still shows cingular's wellcome screen and that is all.after that the only thing i can do is to remove the battery because nothing else work.I put the original rom from cingular and everything was OK with the setup, but after that -the same.I've tried with this hard reset- the same.probbably the nezt thing that i will do is to hit it into the ground :))

[Qlphn]

I put the original rom from cingular and everything was OK with the setup, but after that -the same.

Missunderstanding here ;)
Our goal was making Your phone alife again.
None of mentionated procedures could help with some unknown to us bug in Your version of 3-rd party software ;)

[karhoe]

The latest skype works perfectly for me, in WM5 and WM6, since you are going to hard reset, why not perform a WM6 upgrade?

[mi4]

I was tried to reflash with the original aku2 rom from htc/cingular (the flash was successfull)but after that the phone is still not working.allways the same- cingular's startup screen and that's all.also try with hard reset with no success.I doubt that this phone will ever work again.or if there is another way to "clean" the whole memory?!is it possible to hardware reset the phone?

[karhoe]

Format BINFS and reflash, that will clean everything except the IPL and SPL