O2 XDA model PM 300 dead during upgrade

[haveriii]

O2 XDA model PM 300 dead during upgrade

I need help, my XDA is not running at all no sing of life , I try with holding camera and reset button nothing no sine ,
If anyone know how to start on or get into the tri-color screen , pls help

Regards

[lepus]

can u turn it on or is it completely dead??

if not, try another battery

[haveriii]

I can’t start xda that is a problem, is dead , battery it was around 75 % , I need help if know of to start aging after my mistake during upgrade I install old upgrade and it stop on 3 colors screen in I move a usb cable after that I can not start any more if you have any info which it can help I will appreciatively
Regards to all

[prophet_g4]

remove the batterry for a days time and check the next day have tried the same and with success

ipl 2.10
spl 3.08
radio 2.19
os 2.20 jesterz

[GangsterNupe]

You should find an extra usb cable and expose the black and red wires. Plug the oposite end into the usb port on your computer, then hold the red wire on the positive end of the battery and put the black wire on the negative end of the battery. Do this for about 30 seconds then put your battery back into your phone. This will restart your battery.

[haveriii]

I don’t have problem with battery , battery is working OK , I test in other xda , I have problem with XDA , is dead during upgrade , I put wrong upgrade and it stop on 3 colours and I move I usb cable and after I can not start power on or rest . If anyone know how please reply

Regards to all

[zabardast_1]

O2 XDA model PM 300 dead during upgrade

I need help, my XDA is not running at all no sing of life , I try with holding camera and reset button nothing no sine ,
If anyone know how to start on or get into the tri-color screen , pls help

Regards

Hi

Have u tried to force bootloader mode (the tri coloured screen),it is done, by pressing down the camera and while keeping it pressed,than press the power on button with other hand. It will switch on the device in bootloader mode( into the tri color screen) from there than flash the original Rom of ur carrier,which came pre-installed on the device or any other Official Rom from the same carrier.U can download official rom from ur carriers site.
Hope this will help and revive ur device.

secondly follow this excellent thread and read and ask for help there. Goodluck :)

http://forum.xda-developers.com/showthread.php?t=294107

[fardeen20]

hi! friends need an urgent help plz while i was updating the rom my o2 got stuck with some blank screen written with "SERIAL" on the top and "VS1.02" at the bottom plz help how to get back my phone software

[l3v5y]

Can you enter bootloader? Hold the COMM manager button and soft reset.

[mrvanx]

@fardeen20

Please do not cross post the same thing in several threads. You have been answered alread. I have deleted the repeated posts for you. strike 1

[l3v5y]

Wow! There is a moderator for this forum!
Have you tried entering bootloader when the device is plugged into the charger? I know you say the battery works, but that doesn't mean the device can use the battery. Does the device do anything when plugged in or powered on?

[dysfcukti0nal]

im havin the same issue... my prophet wont even wake up... no power.. batt was more than 80% before flashed.. what can i do to get the power back..?? pls reply

[Sluco]

Can someone post a picture of how the bootloader screen should look like?

I know it is a stupid question, but maybe that will help me solve my problem as well.

[l3v5y]

http://wiki.xda-developers.com/index.php?pagename=prophet_bootloader

may help.

[ydizor]

i need the tool for upgrading htc pm300