Can't Updata the ROM or Radio, Bar stays 0% forever

[camus_dvd]

Problem:
use RUUWrapper.exe to Updata, final step, then Phone Screen stays in 0%, the RUU programs shows a 302 Error. when I did what it told me to, everythings happened again.

First happened when I updata my Radio from 1.51.00.00 to 1.47.00.00

and happened again when I updata the ROM (OS only)


Q:
1. How to solve this?

2. After I upgrade the Radio to 1.51.00.00 I can't hear the others clearly when pick up a phone. try to up the volume, but useless, which version will be OK?

3. any REG modify solution?
I try to modify the REG
HKEY_CURRENT_USER ->
ControlPanel ->
SoundCategories ->
InCall ->
InitVol ->
DWORD Data

6 to 9

but seems no change

[hanissusa]

I had the same problem and most likely noone will help you on this board.... I read the forum, then asked for help and still no educated replies... I feel like this forum is run by HTC producers and they make you brick the phone and force you to and go buy a new one !!!

[ruhanstander]

I feel like this forum is run by HTC producers and they make you brick the phone and force you to and go buy a new one !!!

This thread was hardly 1 hour old and you make a rather rude statement. This forum is supported by volunteers, not people that sit around all day waiting for posts to come in and find a solution that drops out of no-where.

[wacky.banana]

I had the same problem and most likely noone will help you on this board.... I read the forum, then asked for help and still no educated replies... I feel like this forum is run by HTC producers and they make you brick the phone and force you to and go buy a new one !!!

You are not going to make any friends this way mate. If you want quick solutions then read all the material that's on here and search for the answer yourself.

If you don't want problems then leave your phone in its standard state.

WB

[todd_jg]

@camus_dvd: have you checked out the wiki? There may be a solution there. If not, you need to give us more info?

Have you ever successfully flashed before?
Give us Versions? Windows, ActiveSync, .NET, ROM, RUUWrapper (e.g. is it the custom or a standard shipped), etc.

Did you try removing the battery for a couple minutes?

Did you try connecting while in bootloader mode, instead of in normal state? (e.g. put phone in BL, THEN attached USB, then run updater)?

These answers will help us help you.

Oh, and about the volume issue, try using the google search link in my sig to search the forum for "hermes low volume tweak" or something like that. I had a similar problem, but cannot remember the tweak. I do not THINK It was the one you posted.

Heck - onew final edit. I got curious and did the searching. You will find a thread HERE (http://forum.xda-developers.com/showthread.php?t=328450) and it references a tweak in the wiki HERE HERE (http://wiki.xda-developers.com/index.php?pagename=Hermes_Registry). Hope this helps.

@hanissusa: sorry you did not get any "intelligent" answers. If you are unhappy, you are not a prisoner here.

[hanissusa]

If you want quick solutions then read all the material that's on here


I spent 3 days reading the forum, trying all kinds of methods to unbrick it, however it still dead. Is it considered a quick solution ?


Anyways, I successfully flashed my device and made SUPER CID, so its fully unlocked. Thats the only flash I have done prior to upgrading the radio bootloader. I hold 2 computer science degrees and I could understand most of the stuff discussed on this forum, however it didnt solve the problem.


The reason I tried to flash my radio bootloader is because suddenly the phone started to freeze(about every 30 mins). I thought may be the operator has a new radio version so I need to upgrade in order to get the best connection and most importantly never have my phone freezed again.

Did you try removing the battery for a couple minutes?
Tried about 20 times, still unable to flash radio rom with any of the available versions. Always freezes at 0% thru RUU, if I use SD card method freezes in the 10-15% range. I am able to flash everythin, including SPL, operating system, but not the radio rom !!!

Did you try connecting while in bootloader mode, instead of in normal state? (e.g. put phone in BL, THEN attached USB, then run updater)?

Tried that as well. Tried using MMTY, checksum gives me radio error.

sorry you did not get any "intelligent" answers

I got several answers of this type:

"Go read Wiki"
"Go try this method"

and I have done all of it and nothing helped the problem.

You can consider above answers very intelligent, however I did not get a single anser form POF or Olipro - people who actually created this software and know most of the tricks.

[ady_uaic]

for me same problem, only that i can't use my device anymore:(( : I tried to install another rom, Hermes_WM6_WWE_vp3G_v3[1].61.0_ATT_Full.rar and Touch_I_interface_beta.zip and crashed. and now, i enter in bootloader, if i want to make super cid it tells me to connect the pda even if is connected. and if i try to install other roms is stuck on 0%

[Kevbodian]

I spent 3 days reading the forum, trying all kinds of methods to unbrick it, however it still dead. Is it considered a quick solution ?


Anyways, I successfully flashed my device and made SUPER CID, so its fully unlocked. Thats the only flash I have done prior to upgrading the radio bootloader. I hold 2 computer science degrees and I could understand most of the stuff discussed on this forum, however it didnt solve the problem.



I wonder what kind of institution gave you said degrees? I have a degree in Japanese and Linguistics but I suck at both.

"flashed my device and made super CID, so its fully unlocked"

Flashed and superCID does NOT mean fully unlocked. If you can read programming and or networking text books, I don't understand what is so hard about the wiki?

If you read everything and actually tried to understand it all, then you would know that flashing the radio is inherently dangerous and that 9/10 times the radio is not the issue.

[Kevbodian]

Problem:
use RUUWrapper.exe to Updata, final step, then Phone Screen stays in 0%, the RUU programs shows a 302 Error. when I did what it told me to, everythings happened again.

First happened when I updata my Radio from 1.51.00.00 to 1.47.00.00

and happened again when I updata the ROM (OS only)


Q:
1. How to solve this?

2. After I upgrade the Radio to 1.51.00.00 I can't hear the others clearly when pick up a phone. try to up the volume, but useless, which version will be OK?

3. any REG modify solution?
I try to modify the REG
HKEY_CURRENT_USER ->
ControlPanel ->
SoundCategories ->
InCall ->
InitVol ->
DWORD Data

6 to 9

but seems no change

Read here:

http://forum.xda-developers.com/showthread.php?t=332565

then here:

http://forum.xda-developers.com/showpost.php?p=1177210&postcount=5

or from here:

http://wiki.xda-developers.com/

then read the stickies and do a search.... it's all been discussed before

[ady_uaic]

does exists any way to upgrade my dead tytn from storage card? I have an Qtek S200 and a HTC P3300 (if i can use them to restore my dead tytn). please all. I don't know what to do with him

[hanissusa]

Is there a senior, experienced member on this forum from London, UK ? Please help me fix the radio, beers and drinks are on me.

[wacky.banana]

does exists any way to upgrade my dead tytn from storage card? I have an Qtek S200 and a HTC P3300 (if i can use them to restore my dead tytn). please all. I don't know what to do with him

Is this what you are looking for?

http://wiki.xda-developers.com/index.php?pagename=Hermes_SDCardFlashing

@hanissusa,

Why don't you just send your device back to the repair centre, foot the bill, and put it all down to experience? You may have a hardware problem that nothing on here might solve.

You might be better off going down that route than going through the pain of trying to sort it and not getting anywhere. Also stops you p**sing people off on here. You can't claim that just because you have had a bad experience we should all stop flashing our devices.

We are all aware of the risks and if we can't fix it then its put your hand in your pocket time and send it back to be repaired.

Good luck with it; hope it all works out.

WB

[ady_uaic]

thx a lot. I will try it, 'cause i'm tired to use all kind of stufs

[ady_uaic]

my first SPL was 1.03 but after a try of upgrading ROM it was modifed in 2.03 and i think this is the problem. does anyone knows how to modify it?

[ady_uaic]

how can i downgrade my SPL ?

[hanissusa]

pi$$ing people off ? hey chill back I am just giving experienced advice to other people, just as you do. The fact that our opinions are different does not mean that you are right and I am wrong.

Anyways, I have T-Mobile MDA, as far as I udnerstood HTC repair would not care to fix it ?

[wacky.banana]

pi$$ing people off ? hey chill back I am just giving experienced advice to other people, just as you do. The fact that our opinions are different does not mean that you are right and I am wrong.

Anyways, I have T-Mobile MDA, as far as I udnerstood HTC repair would not care to fix it ?

Have you called the repair centre to see whether they will fix it or not? Your worse case scenario is that they say no. There again they might say yes, especially if you are willing to foot the bill, or put you in contact with another company who can sort it out for you.

I really do hope you can get it fixed; however I think you have started out on the wrong footing on this board and you may well find that people on here now just don't want to help you out (please don't shoot the messenger).

Good luck with it.

Cheers

WB

[fun_key]

how can i downgrade my SPL ?

You can't without a running OS setuped on your device. If you don't have the HardSPL you should try to flash with the default flasher AND a rom matching your CID.

If there is a rom matching your CID out you may have quite good chance to get your hermes back to live. Toying without hardspl is a really bad thing :-)

[ady_uaic]

and that hardSPL how can i do it?

[hanissusa]

Have you called the repair centre to see whether they will fix it or not?


Which centre should I call if I live in London, UK ? Maybe somebody wants to help me fix this and get paid ?