PDA

View Full Version : Hermes (JASJAM) Dead+Tricolour screen!


asadoo
27th September 2007, 04:53 AM
while updating to XDA live frm Schaps, my JASJAM stuck at 51%, now it's showing tri-colour screen


i did mitty here are the details

Cmd>info 2
HTCSSuperCIDHTCE
Cmd>info 3
HTCSH
Cmd>info 4
HTCS Lœ3ÆHTCE
Cmd>info 6
HTCST ÚÈÒHTCE
Cmd>info 7

HTC Integrated Re-Flash Utility, Common Base Version : 1.60d
Device Name: HERM100, Bootloader Version : 1.40.Olipro
Built at: Mar 30 2007 15:10:47
Copyright (c) 1998-2007 Modified By Olipro - Hard-SPL

CPU ID=0x41129200
Main CPLD version=0x5
Upper CPLD version=0x4
Main Board version=0x6


Cmd>info 8
Block 0x0(0) is Reversed block
Block 0x1(1) is Reversed block
Block 0x2(2) is Reversed block
Block 0x3(3) is Reversed block
Block 0x4(4) is Reversed block
Block 0x5(5) is Reversed block
Block 0x6(6) is Reversed block
Block 0x7(7) is Reversed block
Block 0x8(8) is Reversed block
Block 0x9(9) is Reversed block
Block 0xA(10) is Reversed block
Block 0xB(11) is Reversed block
Block 0xC(12) is Reversed block

Partition[0], type=0x20, start=0x2, total=0x18FE
Partition[1], type=0x23, start=0x1900, total=0x1800
Partition[2], type=0x25, start=0x3100, total=0x1E500
Partition[3], type=0x4, start=0x21600, total=0x19200

CE Total Length(with sector info) = 0x43CB000
CE CheckSum Length(without sector info) = 0x42C0000


pls help me to bring my JASJAM to life.. :)

asadoo
27th September 2007, 06:54 AM
i finally able to bring back my JAMJAM to life by this procedure!

1. Disable Activesync: connections -- settings -- uncheck "Allow USB Connections"
2. Take out battery, sim, and sd card
3. Look at your phone for SPL version. Mine was 1.40
4. Run RUUWrapper.exe on a ROM that you know would work. I used Scahps. Choose -2.02 bootloader option on the phone bootloader option.
5. Wait, don't hook up USB cable to your phone yet. Check the box where you're agreed to upgrade then hit Next
6. Now hook your phone to activesync and let RUUWrapper picks it up.
7. That's all. I guess if it didn't recognize your device at step 6, then I would try again if i were you."


and my JASJAM was working again! :)