How Configure Alltel MMS Account to Work in Sprint?

[yangers]

I just installed yesterday the Altell ROM in my Sprint Mogul phone and everything look work fine except the MMS, thanks Olipro for your work;

I used this configuration:

Server name: Sprint
Gateway: (leave in blank)
Port number: 80
Server address: http://mms.sprintpcs.com/servlets/mms
Connect via: (here the Sprint is not available The Internet and doesn't worked)
Sending size limitation: 300kb
WAP: Select WAP 2.0

[utexascg]

i had the same problem. find a cab on xda for arcsoftmms and install it. then soft reset. after resetting, uninstall the cab you just installed. soft reset again.

now go into your mms settings and set up a new default with the settings you previously used.

It worked for me. Give it a shot. I don't know what the arcsoft installation does that corrected my problem, but it's fixed and working perfectly

later

[Vertig0]

Im using the same settings and everything is working fine if is under 300k... anyone know hoe to increase the size? the drop down menu on show 300k.

Thanks!

[utexascg]

Im using the same settings and everything is working fine if is under 300k... anyone know hoe to increase the size? the drop down menu on show 300k.

Thanks!

i have mine currently set at 585K in the drop down menu.

it's just a registry setting you need to change

HKLM-SOFTWARE-ARCSOFT-ARCSOFT MMS-CONFIG-mm1-96352-

then increase the values for both the WAP1DefaultSize and WAP2DefaultSize

Later

[yangers]

i had the same problem. find a cab on xda for arcsoftmms and install it. then soft reset. after resetting, uninstall the cab you just installed. soft reset again.

now go into your mms settings and set up a new default with the settings you previously used.

It worked for me. Give it a shot. I don't know what the arcsoft installation does that corrected my problem, but it's fixed and working perfectly

later

Hi, thanks for you answer, just a question what you did after uninstall the arcsoftmms because i don't see no more the MMS folder in my Pocket Outlook and the settings for MMS is there but you i can't see either where you can create one MMS Folder......well thanks in advance....

[utexascg]

just wanting to make sure i'm understanding, you've already installed and then uninstalled the arcsoft, correct?

If so, then just access the mms setting and configure it with the information that was in the previous post. Once you've done that you should be able to go into your sms messaging and select "new mms" and that should be it

[Tenny]

Any links to the arcsoftmms that you used?

[utexascg]

cab file is attached.

again, i don't take credit for the file. i found it on xda i just don't remember where

later

[Vertig0]

i have mine currently set at 585K in the drop down menu.

it's just a registry setting you need to change

HKLM-SOFTWARE-ARCSOFT-ARCSOFT MMS-CONFIG-mm1-96352-

then increase the values for both the WAP1DefaultSize and WAP2DefaultSize

Later



THANK YOU!!!

[yangers]

just wanting to make sure i'm understanding, you've already installed and then uninstalled the arcsoft, correct?

If so, then just access the mms setting and configure it with the information that was in the previous post. Once you've done that you should be able to go into your sms messaging and select "new mms" and that should be it

Yes i did it, first time using a Arcsoft MMS that i have and one more time using the version you have but i don't any Folder in my Messaging (Pocket Outlook) after this but i using the HTC Home Plugin and when i hit the Message Button then i can see the inbox folder and selecting new create a message eith Pictures or Multimedia staff but when i hit send he start the like uploading (couting percentage slow depend of the size) but i at the end i got a message saying ... " Message could not be send. Unsupported message format, Operation failed!. Version cannot be supported......

[Dishe]

so one second... we have to install and then uninstall the arcsoft one to make this work?

does anyone else think this is a silly way to go about it?
What does the installation do? its probably as simple as changing some registry settings.

[yangers]

so one second... we have to install and then uninstall the arcsoft one to make this work?

does anyone else think this is a silly way to go about it?
What does the installation do? its probably as simple as changing some registry settings.

Actually there is a registry modification file to fix this without the uninstall staff...i found this in PPCGEEKS

[nickmford]

I just installed yesterday the Altell ROM in my Sprint Mogul phone and everything look work fine except the MMS, thanks Olipro for your work;

I used this configuration:

Server name: Sprint
Gateway: (leave in blank)
Port number: 80
Server address: http://mms.sprintpcs.com/servlets/mms
Connect via: (here the Sprint is not available The Internet and doesn't worked)
Sending size limitation: 300kb
WAP: Select WAP 2.0

Those are the correct settings -- Connect via "choose alltel wireless" --

MMS should be fine after that. Its the same internet connection as creating your own Sprint connection.

[Dishe]

Actually there is a registry modification file to fix this without the uninstall staff...i found this in PPCGEEKS

How do you apply this reg edit? clicking on a .reg file opens up RegEdit on the PPC, but alas, it doesn't actually DO anything!

[yangers]

How do you apply this reg edit? clicking on a .reg file opens up RegEdit on the PPC, but alas, it doesn't actually DO anything!

Is just double click and will be added (modify) to your REGISTRY.........

[DaIronFist]

I have tried all of these settings and still am not gettin mms to work. Everything is set corretcly. are there any new updates?

[B18DelSolT]

all yo have to do is change the server address to http://63.215.195.152 and it should fixx all of your issues :)