PDA

View Full Version : semi-brick? teehee


jirehlubrin
05-10-2007, 09:53 AM
ok its weird. heres the problem:

sometimes i have the radio 1.16 showing on boot...and then sometimes it say s NO GSM.

also when i do get the 1.16 radio working, my hermes freezes..

is it because i have bad blocks?

jirehlubrin
05-10-2007, 10:00 AM
Cmd>info 8
Block 0x0(0) is Reversed block
Block 0x1(1) is Reversed block
Block 0x2(2) is Reversed block
Block 0x3(3) is Reversed block
Block 0x4(4) is Reversed block
Block 0x5(5) is Reversed block
Block 0x6(6) is Reversed block
Block 0x7(7) is Reversed block
Block 0x8(8) is Reversed block
Block 0x9(9) is Reversed block
Block 0xA(10) is Reversed block
Block 0xB(11) is Reversed block
Block 0xC(12) is Reversed block
Block 0x17A(378) is BAD block !!!

Partition[0], type=0x20, start=0x2, total=0x18FE
Partition[1], type=0x23, start=0x1900, total=0x1900
Partition[2], type=0x25, start=0x3200, total=0x1B500
Partition[3], type=0x4, start=0x1E700, total=0x1C100

CE Total Length(with sector info) = 0x3DD3800
CE CheckSum Length(without sector info) = 0x3CE0000

Cmd>

jirehlubrin
05-10-2007, 10:11 AM
ack nmmmm im going to kill myself

larsuck
05-10-2007, 02:31 PM
So, can I buy your hermes cheap before you pull the trigger?

Wam7
05-10-2007, 03:57 PM
How much have you read in the WIKI... obviously info enough to know Info 8.

Have you HardSPL'd? Have you checked the unbrick table in the WIKI? Have you checked the super long unbrick thread... You give pretty much no context to your problem so don't expect too much help.

austinsnyc
05-10-2007, 04:15 PM
No its not becasue of bad blocks. Most hermes straight from HTC have 3 bad blocks your only showing one. I would say it has to do with the radio bootloader but i could be wrong why dont you try and upgrade your radio since that one is long outdated we are up to 1.54 right now.

N2A
05-10-2007, 05:29 PM
Read the section on the wiki (http://wiki.xda-developers.com/index.php?pagename=Hermes_Unbrick)... *groan*