starbase64
05-10-2007, 02:41 PM
Hi,
I hope my English is good enough, to explain that here understandably. If errors here are contained please announce, i correct then.
english version (for german scroll down)
OEM Package from Win32 EXE file
connect the phone at computer
start program on your computer
the progam copy the cab file to \Windows\AppMgr\Install\
the installation do not break off!!!
transfer the cab to your computer and go to "OEM Package from Cab file"
OEM Package from PPC EXE file
proceed as with cab the file (you do not have to extract files)
put a link in to start the menu (create a Link (example.ink))
the file initflashfile.txt specifies where the link comes
OEM Package from CAB file
make a folder with the package name
extract cab file in this folder (use Cab Analyzer (http://www.codeppc.com/telechargements/msceinf/MSCEInfEn.zip))
build a initflashfile.txt with a initflashfilegenerator (extract attached zip file on Drive C:\) (not used if all files into windows folder are)
copy the new initflashfile.txt into new package folder
go UUID Generator (http://www.famkruithof.net/uuid/uuidgen) and provide a number for your new package, use version 4/Random for this
create two new txt files in your package folder and designate it in such a way "UUID.dsm" and "UUID.rgu" (example: 4a68513d-485f-469d-b769-efc2f8ff641b.dsm) store these files as UNICODE!!! rgu file only necessarily if registration entries to be made
export the registry entries from cab file in to a reg file and open this with notepad, that should look then as the example.reg.jpg (http://img266.imageshack.us/img266/8279/exampleregat6.jpg)
copy contents of *.reg file into *.rgu file, or rename *.reg into *.rgu, store with UNICODE!!
copy the attached option.xml in your package folder and open it with notepad (look here for help on this file (http://img248.imageshack.us/img248/6403/optionxmljm2.jpg)) (i have renamed in option.xml.txt, you must cancel that)
control once again the file list
- all files from cab file
- *.dsm file with UUID generated number as filename
- *.rgu file with UUID generated number as filename and the registry entries
- option.xml with the entries of your package
- initflashfile.txt
copy you package folder in your pandora kitchen OEM folder and test it
test it again (to the caution)
german version
Ich hoffe ich das hier verständlich erklären, ansonsten einfach mal nachfragen. Wenn hier Fehler enthalten sind, bitte melden. Ich korriegiere sie dann.
OEM Package from Win32 EXE file
verbinde PPC mit dem Computer
starte das Programm welches du installieren willst
das Programm wird die Cab Datei auf den PPC nach "\Windows\AppMgr\Install\" kopieren
die Installation nicht abbrechen!!!
kopiere die Cab Datei auf deinen Computer und gehe zum nächsten Schritt "OEM Package from Cab file"
OEM Package from PPC EXE file
verfahre wie bei einer Cab Datei (du brauchst aber keine Dateien extrahieren, die vorhanden EXE Datei ist die ausführende Datei)
erstelle eine Verknüpfung im Start Menü (example.ink)
die Datei initflashfile.txt muss spezifische Angaben über den Speicherort der Verknüpfung enthalten
OEM Package from CAB file
erstelle einen Ordner und gebe ihm den Namen deines OEM Packets
extrahiere alle Dateien aus der Cab Datei in deinen Ordner (nutze dafür den Cab Analyzer (http://www.codeppc.com/telechargements/msceinf/MSCEInfEn.zip))
erstelle die initflashfile.txt (entpacke die angehängte Zip Datei auf "C:\" sie enthält eine Datei mit Anweisung) (brauchst du nicht wenn alle Dateien später in den Windows Ordner sollen)
kopiere die initflashfile.txt in deinen OEM Packet Ordner
gehe zu UUID Generator (http://www.famkruithof.net/uuid/uuidgen) und erstelle dir eine UUID nutze dafür die Option "version 4/Random" und kopiere die neue Nummer in die Zwischenablage (markiere sie und drücke strg+c)
erstelle zwei text Dateien ungeben ihnen folgende Namen "die soeben erstellte Nummer.dsm" and "die soeben erstellte Nummer.rgu" (Beispiel: 4a68513d-485f-469d-b769-efc2f8ff641b.dsm) speichere diese Datei im Format UNICODE!!! die RGU brauchst du nicht, wenn keine Registrierungseinträge gemacht werden.
exportiere die Registrierungseinträge aus der Cab Datei in eine Beispiel.reg und öffne sie mit dem Editor, bearbeite die Datei damit sie aussieht wie diese:example.reg.jpg (http://img266.imageshack.us/img266/8279/exampleregat6.jpg)
wenn du fertig bist kopiere den Inhalt der Reg Datei in die RGU Datei und speichere sie im Format UNICODE!!
kopiere die angehängte Option.xml.txt in deinen Packet Ordner, benenne sie um in Option.xml und öffne sie mit dem Editor (hier gibt es Hilfe zu dieser Datei (http://img248.imageshack.us/img248/6403/optionxmljm2.jpg))
diese Dateien sollten jetzt in deinem Packet Ordner seien:
- alle Dateien aus der Cab Datei
- *.dsm Datei mit der generierten Nummer
- *.rgu mit der Generierten Nummer und den Registrierungseinträgen
- option.xml mit den Informationen zu deinem Packet
- initflashfile.txt
kopiere deinen Packet Ordner in den OEM Ordner von Pandora Kitchen und teste es
teste es nochmal (vorsichtshalber)
with friendly greet
Starbase64
I hope my English is good enough, to explain that here understandably. If errors here are contained please announce, i correct then.
english version (for german scroll down)
OEM Package from Win32 EXE file
connect the phone at computer
start program on your computer
the progam copy the cab file to \Windows\AppMgr\Install\
the installation do not break off!!!
transfer the cab to your computer and go to "OEM Package from Cab file"
OEM Package from PPC EXE file
proceed as with cab the file (you do not have to extract files)
put a link in to start the menu (create a Link (example.ink))
the file initflashfile.txt specifies where the link comes
OEM Package from CAB file
make a folder with the package name
extract cab file in this folder (use Cab Analyzer (http://www.codeppc.com/telechargements/msceinf/MSCEInfEn.zip))
build a initflashfile.txt with a initflashfilegenerator (extract attached zip file on Drive C:\) (not used if all files into windows folder are)
copy the new initflashfile.txt into new package folder
go UUID Generator (http://www.famkruithof.net/uuid/uuidgen) and provide a number for your new package, use version 4/Random for this
create two new txt files in your package folder and designate it in such a way "UUID.dsm" and "UUID.rgu" (example: 4a68513d-485f-469d-b769-efc2f8ff641b.dsm) store these files as UNICODE!!! rgu file only necessarily if registration entries to be made
export the registry entries from cab file in to a reg file and open this with notepad, that should look then as the example.reg.jpg (http://img266.imageshack.us/img266/8279/exampleregat6.jpg)
copy contents of *.reg file into *.rgu file, or rename *.reg into *.rgu, store with UNICODE!!
copy the attached option.xml in your package folder and open it with notepad (look here for help on this file (http://img248.imageshack.us/img248/6403/optionxmljm2.jpg)) (i have renamed in option.xml.txt, you must cancel that)
control once again the file list
- all files from cab file
- *.dsm file with UUID generated number as filename
- *.rgu file with UUID generated number as filename and the registry entries
- option.xml with the entries of your package
- initflashfile.txt
copy you package folder in your pandora kitchen OEM folder and test it
test it again (to the caution)
german version
Ich hoffe ich das hier verständlich erklären, ansonsten einfach mal nachfragen. Wenn hier Fehler enthalten sind, bitte melden. Ich korriegiere sie dann.
OEM Package from Win32 EXE file
verbinde PPC mit dem Computer
starte das Programm welches du installieren willst
das Programm wird die Cab Datei auf den PPC nach "\Windows\AppMgr\Install\" kopieren
die Installation nicht abbrechen!!!
kopiere die Cab Datei auf deinen Computer und gehe zum nächsten Schritt "OEM Package from Cab file"
OEM Package from PPC EXE file
verfahre wie bei einer Cab Datei (du brauchst aber keine Dateien extrahieren, die vorhanden EXE Datei ist die ausführende Datei)
erstelle eine Verknüpfung im Start Menü (example.ink)
die Datei initflashfile.txt muss spezifische Angaben über den Speicherort der Verknüpfung enthalten
OEM Package from CAB file
erstelle einen Ordner und gebe ihm den Namen deines OEM Packets
extrahiere alle Dateien aus der Cab Datei in deinen Ordner (nutze dafür den Cab Analyzer (http://www.codeppc.com/telechargements/msceinf/MSCEInfEn.zip))
erstelle die initflashfile.txt (entpacke die angehängte Zip Datei auf "C:\" sie enthält eine Datei mit Anweisung) (brauchst du nicht wenn alle Dateien später in den Windows Ordner sollen)
kopiere die initflashfile.txt in deinen OEM Packet Ordner
gehe zu UUID Generator (http://www.famkruithof.net/uuid/uuidgen) und erstelle dir eine UUID nutze dafür die Option "version 4/Random" und kopiere die neue Nummer in die Zwischenablage (markiere sie und drücke strg+c)
erstelle zwei text Dateien ungeben ihnen folgende Namen "die soeben erstellte Nummer.dsm" and "die soeben erstellte Nummer.rgu" (Beispiel: 4a68513d-485f-469d-b769-efc2f8ff641b.dsm) speichere diese Datei im Format UNICODE!!! die RGU brauchst du nicht, wenn keine Registrierungseinträge gemacht werden.
exportiere die Registrierungseinträge aus der Cab Datei in eine Beispiel.reg und öffne sie mit dem Editor, bearbeite die Datei damit sie aussieht wie diese:example.reg.jpg (http://img266.imageshack.us/img266/8279/exampleregat6.jpg)
wenn du fertig bist kopiere den Inhalt der Reg Datei in die RGU Datei und speichere sie im Format UNICODE!!
kopiere die angehängte Option.xml.txt in deinen Packet Ordner, benenne sie um in Option.xml und öffne sie mit dem Editor (hier gibt es Hilfe zu dieser Datei (http://img248.imageshack.us/img248/6403/optionxmljm2.jpg))
diese Dateien sollten jetzt in deinem Packet Ordner seien:
- alle Dateien aus der Cab Datei
- *.dsm Datei mit der generierten Nummer
- *.rgu mit der Generierten Nummer und den Registrierungseinträgen
- option.xml mit den Informationen zu deinem Packet
- initflashfile.txt
kopiere deinen Packet Ordner in den OEM Ordner von Pandora Kitchen und teste es
teste es nochmal (vorsichtshalber)
with friendly greet
Starbase64