PDA

View Full Version : msvc over headset

LuXx
12-10-2007, 04:26 AM
has anybody got msvc working over headset? if so what are you using? the program I was using with the hermes doesn't work on the tilt. thanx
goestoeleven
12-10-2007, 06:22 AM
MSVC 1.6 works out of the box as advertised. No need for any Hermes hacks (chances are they'll break something).
Slave1
12-10-2007, 09:24 AM
I've mapped mine to the voice activation key (the one with the speach bubble) but it won't start with my BT headset.
LuXx
12-10-2007, 02:38 PM
msvc 1.6 doesn't work out of the box! when I hold down button on my headset the dialpad opens and I can hear the headset connect but the msvc doesn't start. I have added a 6 buton in the reg to replace ptt with the voice command.

MSVC 1.6 works out of the box as advertised. No need for any Hermes hacks (chances are they'll break something).
PerfAlbion
12-10-2007, 04:51 PM
Well, VC does work out of the box, but you probably need to re-map buttons. On the TyTN II, Button 6 was Voice Speed Dial, and I needed to change that. On the Tilt, it's PTT and you'll need to change that.

But once I made that change, it worked like a charm without any issues on my TyTN II. I'm using a Plantronics Discovery 655, which also might matter - perhaps deleting and re-partnering with your headset might help.

With PTT re-mapped to VC you're having a problem?
kavi
12-10-2007, 05:47 PM
has anybody got msvc working over headset? if so what are you using? the program I was using with the hermes doesn't work on the tilt. thanx

Give this a shot

http://forum.xda-developers.com/showthread.php?t=333260
millercentral
12-10-2007, 06:12 PM
I too have had no issues with MS Voice Command 6 on Kaiser. I was never able to get it to work reliably on my Hermes, but notifications and all commands work great over my BlueAnt headset. I currently don't have a button on the phone mapped to it, I only use the headset buton.
bdog94tiger01
12-10-2007, 06:41 PM
Well, VC does work out of the box, but you probably need to re-map buttons. On the TyTN II, Button 6 was Voice Speed Dial, and I needed to change that. On the Tilt, it's PTT and you'll need to change that.

But once I made that change, it worked like a charm without any issues on my TyTN II. I'm using a Plantronics Discovery 655, which also might matter - perhaps deleting and re-partnering with your headset might help.

With PTT re-mapped to VC you're having a problem?

I am using the same headset with the Tilt (Att Rom) and I am not very pleased with the BT setup. I do not get notifications through the headset like I used to; and with the BT ROM available, I have no way to click on announcements through the headset. One other problem is that now the reception distance with the 655 is about 6ft at best. Any recommendations on what I can change?

I may flash over to HTC ROM, but I am a little scared as to doing that plus I would have to re-install all my apps (I think).
goestoeleven
12-10-2007, 06:43 PM
msvc 1.6 doesn't work out of the box! when I hold down button on my headset the dialpad opens and I can hear the headset connect but the msvc doesn't start. I have added a 6 buton in the reg to replace ptt with the voice command.

Sorry, I neglected to mention that I also completely disabled Cyberon VoiceDialer and disabled PTT before intstalling MSVC. Then it works out-of-the-box perfectly... even notifications!
chop69
12-10-2007, 06:48 PM
On a Tilt, it did not work at first, but when I did the registry edit to allow for changing the PTT button, and set that button to VC, it works.
LuXx
13-10-2007, 12:11 AM
Thanks for pointing me in the right direction. Working great!


Give this a shot

http://forum.xda-developers.com/showthread.php?t=333260