No GSM, D 5.60.00 WWE? Whats that mean?

[xXBuddahXx]

Well i tried to install WM6 and a screen with 4 BIG bold lines (from top to bottom Blue Green Red and this () yellow/tan color) and on the bottom line it has
No GSM
D 5.60.00 WWE
How do i fix this/whats wrong/WTF/ help please =/

EDIT: now i was messing around with the buttons and up came this,
(all options are selected no)
Boot Options:
Enable KITL__________NO
Clean Registry Hive ___NO
Format storage_______NO

Do i enable one of these or something? please help me...

[LGSilva]

Enable the last two and press the "envelop" button.
That should fix your problem

[jakubd]

Extra question: are you sure your device is BlueAngel?

[xXBuddahXx]

@up no im not, I didnt even know my phone had a name, Mine is a Audiovox PPC6600 but its the same pic as the blue angel, So i assumed it was.

Okay, I did what he said, and then my screen went white, after a few of waiting it was still white so i did a soft reset, and now its at the same spot.

[LGSilva]

Mine is a Audiovox PPC6600

Big problem right there! I think you just bricked your phone :eek:

The ROMs you find here are for GSM phones and yours is CDMA. Currently there are no wm6 ROMs or wm5 ROMs available for CDMA phones, some people were working on a wm5 but I don't know if they released it.

To fix your phone you may try to put it in bootloader again and try to flash it with an original ROM.

Good luck!

[jakubd]

This "No GSM" made me think. So we have another gotcha and Harrier (this is your device, xXBuddahXx) probably saved :)

[xXBuddahXx]

Ok what now? did i really BIRCK my phone? Im confused Jakubd is there a way to fix it? i hope so or that smiley face is really mean. Im a huge noob to this crap (im only 16 and this is my first pda/phone thing) So again please have patience with me, Bootloader mode is the record/cam/power/reset thing right? What do i do after that? Can any of you give me some links or a step by step tut? I dont want to screw it up any more than it is if i can fix it...

[LGSilva]

Boot Loader Mode

You can enter or exit bootloader mode by pressing the camera button, power button and then the reset button and hold for a few seconds.

If the above won't work, this worked for me (thanks to all the gurus in the forum): press and hold power+record+camera the same time and then reset

Here you can find the correct ROM for it: http://forum.xda-developers.com/showthread.php?p=764778#105710

If you can get into bootloader mode you're fine, you didn't brick it.

[xXBuddahXx]

Thank u thank u thank u Hey quick question, When i install this do i have to put it in bootloader mode first? and When i install this will it return it to factory settings? Because i flashed it from VZW to Cricket

[LGSilva]

You'll have to put your phone in bootloader mode before you install the update.
After the installation is done, you will need to hardreset it.

When the upgrade is completed, you must perform a Hard Reset

1.

Press and hold the "Power" button, and then press the Reset Button. Colored stripes (the bootscreen) will appear on the screen.
*

If you have a PH20B device such as MDAIII, QTEK 9090, XDAIIs, PDA2K etc, EITHER:
o Quickly press "Record" & "Camera" before the versions appear at bottom right
o OR press "Power" & "Camera" & "Record" buttons and Reset at the same time
*

If you have a PH20B1 device such as SX66:
o Quickly press "Record" & "Windows Media" before the versions appear at bottom right EITHER
o OR press "Power" & "Windows Media" & "Record" buttons and Reset at the same time
2.

You'll see three options on screen. You must change the second and the third to yes. If you are not developing/testing software you can disable the first debug option for better performance.
* If you have a PH20B device such as MDAIII, QTEK 9090, XDAIIs, PDA2K etc, use "Camera" and the "Record" buttons.
* If you have a PH20B1 device such as SX66, use "Windows Media" and the "Record" buttons.
* Note: The "Record" button moves up and down the menu and the "Camera" button toggles Yes/No. When you're done, press the button in the middle of the D-Pad to continue booting.
3. Press the "Mail" button. A white screen will show for 30 seconds, while it is clearing your device in preparation for the new ROM to start executing
4. When the bootscreen, aka. the colored stripes is displayed, wait more, you are booting. The welcome screen to set up your device will appear shortly

If you still that ROM (that you flashed from VZW to Cricket) then use it. :)

[xXBuddahXx]

Well, it didnt take a rom to flash it i just uploaded a prl and Changed my Min and NID/SID numbers... is it still okay to use the one that was listed, or do i have to download a special one for VZW?

And thank you so much man, you really saved me! I would rep ya if i could!

Also is there a website That is for CDMA phones like this one, and does mine have a cool name like blue angel or somthing (it sucks when i tell my friends that i have a Audiovox PPC6600 Gee Wiz!) :-p

[LGSilva]

Your phone is a blueangel, it just have a different hardware for the phone part (PH20A3) and because of that your phone "cool" name is Harrier.

You'll probably have to stick with wm2003 as I don't believe that they have a wm5 or wm6 for your hardware. Here is a link with more information and people trying to make wm5 for the cdma: http://forum.xda-developers.com/showthread.php?t=244441

For the update, download it from verizon: http://support.vzw.com/how_to_use/bba_device_update.html

There are 2 versions, one for a phone with camera and for phones without camera.

[xXBuddahXx]

Error 120 country ID error 56-56-8-8-8
Im guessing i download say the eruopian version or somthing? where would i find this on the USA site or something?

[LGSilva]

I found this on the verizon website here in the USA.

1. Download update to desktop
2. Unrar or unzip all files in exe or rar into a new folder
3. Open the folder with the extracted files
4. Download this file: MaUpgradeUt_noID.ZIP (ftp://xda:xda@ftp.xda-developers.com/BlueAngel/Tools/MaUpgradeUt_noID.zip)
5. Extract MaUpgradeUt_noID.exe from this file and place it with the other upgrade files.
6. Run this new exe file instead of BaUpgradeUt.exe to update your rom
7. If you get an error the first time, run MaUpgradeUt_noID.exe again without touching your device (don't take it out from the cradle, don't reset it, don't touch it at all!)
8. If you get the same error kill from Task Manager these two process: wcescomm.exe and rapimgr.exe and then retry running MaUpgradeUt_noID.exe
9. If the seems to hang forever the "Getting the information...", put your device into Bootloader mode by pressing and hold the "Power" & "Record" buttons, and then press the Reset Button. and run the MaUpgradeUt_noID.exe again

[xXBuddahXx]

This application has failed to start because RUU.dll was not found. Re Installing the application may fix this problem. I didnt even install it, its just an exe =/ soooo close!

[LGSilva]

You're not reading the instructions dude.
First you donwload the update from the verizon website
Then you use winrar or winzip to extract all the files from the archive to a folder
Now copy the MaUpgradeUt_noID.exe (wich you extracted from the zip file) to the same folder
Run the MaUpgradeUt_noID.exe and you should be fine

[xXBuddahXx]

Sorry man, i know i must be getting annoying =/. But i cant find the update to download from the website :S

[LGSilva]

Ok... after 1/2 hour uploading I got two files for you:

If your phone have a camera:
HA_VZW_207_117_01167_A12.rar (37.98 MB)
http://www.megaupload.com/?d=W2M60157

If your phone don't have a camera:
HA_VZW_207_118_01167_A12.rar (37.67 MB)
http://www.megaupload.com/?d=033DU3IA

Just download the correct file, extract it using winrar, put your phone in bootloader mode and run MaUpgradeUt_noID.exe

Good luck!

[xXBuddahXx]

THANK YOU OH SO MUCH!!!! Man, is there ANYTHING i can do for you??

[jakubd]

Help others.