PDA

View Full Version : Bricked hw 6515 i think

WaKet
16th October 2007, 05:59 PM
I have an Hp ipaq hw6515 and i tried to instal a ROM, but the rom probably don´t work in my phone, now the ipaq don´t turn on, and i can´t go to bootleader, can i do anything?

Thanks
cluurk
18th October 2007, 09:55 AM
When you plug the ipaq to the power mains, does the led light up? Probably in red?
WaKet
18th October 2007, 03:01 PM
When you plug the ipaq to the power mains, does the led light up? Probably in red?

No, when i plug ipaq to the power mains, the led light don´t turn on, but when i take off The back cover , the led ligths turns on!
and when i pug the ipaq to the PC, the activeSync don´t recognizes my ipaq.

Thanks for help me.
cluurk
19th October 2007, 07:38 AM
Ok try to put back the back cover, battery and if you have your cradle, plug your cradle to the powers mains then connect to the PC. Im fairly certain that it should show up as an unrecongised device. If so, then it should be in bootloader mode then try to run the rom upgrade again
WaKet
19th October 2007, 03:30 PM
Ok try to put back the back cover, battery and if you have your cradle, plug your cradle to the powers mains then connect to the PC. Im fairly certain that it should show up as an unrecongised device. If so, then it should be in bootloader mode then try to run the rom upgrade again


thaks for help me once again.
i already done this, but i dont have a Rom for my ipaq!
anybody has one wich can give me?
cluurk
20th October 2007, 05:24 PM
Did you try running the HP rom updates again? If it is unable to detect the model of the IPAQ then you will need to get a rom image and restore via an SD card. You should beable to find urls for rom images from MobilityToday's forums.
emistide
26th October 2007, 02:12 PM
i have hw6515 same problem, i think the bootloader area is erased. the only way is a com cable & mtty to write area.
watchsat
7th November 2007, 09:53 PM
i have hw6515 same problem, i think the bootloader area is erased. the only way is a com cable & mtty to write area.

Oh, no... Even worst.

You need the bootloader to response the com port and your mtty, once it gone the only way to bring it back are (1) by JTAG port. (2) reprogram the flash memory.

Your 6515 is good for parts by now, I got a 6515 with broken LCD/case is good for you. ;-)

Cheers,