firmware update to SPV M2000

[apollo13]

I have tried to install the firmware update to my SPV M2000 from the Orange web site, it now displays a white screen with USB at the top and v2.07 at the bottom when docked in the usb cradle. It displays serial when undocked. The device is recognised when attached via the usb so it is communicating with the laptop. I have tried several times to continue the update - RUU_V2.5_ORANGEUK_V5.40.1.179_SHIP and it always stops on error 101 not communicating with PC. If I use MAUpgrade_noID then I get ROM Upgrade utility error, not designed for your device. I am able to synchronise another SPV M2000 using the same cradle and laptop with no problem comunicating.

I have tried to download an image from clubmate but cannot register as I do not have an Imate device. Any advice or pointers gratefully received.

:confused:

[jakubd]

I think you just tried to flash ROM that is for differetnt device: There was no (and there will ne no) official WM5 ROM for BlueAngel. Experiments with MAUpgrade_noID were very dangerous. But if device still shows Serial/USB, you might be able to repair the damage.
Download any normal, proper ROM for BlueAngel and flash it. but it must be for BlueAngel, not for other deivces. Information on WM5 flashing procedure and links to ROMs you can find on Wiki. There is WM6 also available for BA.