PDA

View Full Version : HTC Wizard/8125/(others) How-To....


nnakao
17-10-2007, 11:26 PM
***POST DELETED***

As you can see below, it seems I have a lot to learn and the last thing I want to do is mislead n00b's like me. This was supposed to be an "easy" way to mod your HTC 8125 but unforunately you have to walk before run so I'm going to do more reading and hopefully I can help people like me who just want WM6 and an easy How-To to get this done. I'm going to keep the attachments as this may be useful, but the rest I'm removing.

Thanks again everyone for your constructive criticism. I will take everyone's advice and read more.

zabardast_1
18-10-2007, 03:48 PM
***THIS IS FOR EXACT STEPS ONLY!!! I DON'T PRETEND TO KNOW HOW/WHY IT WORKS, BUT IT DID FOR ME. DON'T EMAIL ME WITH QUESTIONS. THAT IS WHAT THE "SEARCH" BUTTON IS FOR.

Ok. So instead of posting a question, I figure I'd post a How-To.

Now I'm a n00b, so I did a lot of hunting these forums to get to where I needed to go. I will attempt to post all credits for work done at the end of the "How-To". If I miss anyone, send me an IM and I'll update the post.

First off, let me tell you what I have:

Pre-WM6:
Cingular 8125 locked
CID Locked
G4 Version (look it up.... I forgot to document exactly)
Windows Mobile 5

Post-WM6:
T-Mobile 8125 Unlocked
CID Unlocked
ROM version: 10.1.0.811 WWE
ROM date: 8/11/06
Radio version: 02.25.11
Protocol version: 4.1.13.12
XMA 6 r 3

Now you may be asking yourself "What?!?!?!?". Yeah, me too. To be perfectly honest, I have no idea what most of those means. Fortunately, if you're like me and just wanted to upgrade the damn thing from WM5 to WM6, you really don't need to know much more than the "Radio version" and SIM/CID Lock/Unlock.

Now for some terms. I've been searching this forum for some time and it took me a lot of asking and a lot of more searching to figure out what half the damn terms mean so I'll try to sum up what you'll need for this peticular procedure:

1. Wizard = The one of many names of the HTC 8125
2. nk.nbf = The image, or ROM, of the WM you want to use.
3. G3 = When you boot your HTC, it should say something like 2.xx.11. Any number less than 2.xx.11 is a G3 device. If I'm wrong, someone please let me know and I'll change it.
4. Brick = You got a useless phone! No No, that may not be true. Try searching the forums to recover from a phone that won't boot.... scared ya, didn't i?
5. (reserved for terms that I just can't think of that are important)

===

Ok. So let's get into what exactly I did to get to this point. Register for this forum to get the attached links).

1. Get the Lokiwiz02b/03a (attachments below)
2. Get SoftSPL or sSPL. For G4 users, this will temporarily allow your HTC Wizard/8125/(others) to be upgradable. I say temporary because G4 users only have 1 option (other than SPL) to unlock the CID and that's to pay like 40 bucks and if you're here, you probably don't/can't pay for it. It's a good work-around (attachments below) (http://forum.xda-developers.com/attachment.php?attachmentid=50344&d=1189619527)
3. Get a ROM in which you want to use to upgrade from WM5 to WM6. Here is a good link given to me (credits at the end of the instructions): (http://wiki.xda-developers.com/index.php?pagename=wizard_WM_6). Think of a ROM as a Windows Install Disk, except it's virtual, not physical.
4. Get Active Sync 4.5. Google it and download it.
5. Get a Radio ROM (attachment below)
6. Get a mini-to-standard USB cable (for your phone.... did you get Active Sync 4.5 yet?)

Note: I've read that this process doesn't work for Windows Vista, but since I hate that damn OS, I don't have it and can't verify it doesn't work.

===

Ok. So now that you have all necessary tools, let's get started on the steps to SIM/CID unlock your phone. Why do you have to do both? I have no freakin' clue, but you do.

0. Unzip all .zip files (not .cab) to your computer (i.e. C:\Temp\HTC\(directory name).
1. Install ActiveSync 4.5 and connect your phone to your computer.
2. Copy the EnableRapi.cab to your phone. You can use Windows Explorer to do this.
3. Run the EnableRapi.cab on your computer.
4. Run the Lokiwiz.bat for LokiWiz02b.
5. Use "U." to SIM unlock.
5a. Do not do anything until your phone completely reboots!!!!
6. Run the LokiwizMsl.bat for LokiWiz03a. (Write down the PIN!!!!!)
6a. Do not do anything until your phone completely reboots!!!!
7. Check to see if you can use a different SIM card (if you have one).
8. Enter in the PIN you wrote down to unlock the Network.

===

Ok. Now we ca finally upgrade the OS/ROM/NBF to WM6.

0. Make sure you're phone is connected to the PC with Active Sync.
1. Copy the wanted nk.nbf/ROM/OS you downloaded to the SoftSPL-V0.1 directory.
2. Run the START-sSPL.exe
3. It will run throuth a RUU (ROM Update Utility) that you may or may not have seen before. Just check all the necessary boxes and "Next" your way through the wizard until it successfully updates your phone.
3a. Do not do anything until your phone completely reboots!!!!

That's it! Your phone is officially updated.... I/you/we hope....

==

First off, I'm going to list the linked sites and who was the original poster. Then I will list the people who've helped me.

1. the-equinoxe = sSPL
2. rudegar = helped with the terms and links to HTC Wizard info
3. ??? = I'm sorry but I don't remember where LokiWiz2-3 came from. I didn't bookmark it!!! dammit! If someone knows, let me know and I'll fill in the ???

===

If I have incorrectly said something in the above, please let me know immediately and I'll change it.

HAPPY MODDING!:D

:confused:

this is all very confusing and misleading, :(

Sry to say but you,yourself are not correctly,clear about the whole process of differentiating between the G3 & G4 devices.
SIM/CID Unlocking/ method and upgrading a G3 and G4 are entirely different.
The procedure you have posted is mix up of both devices but not explained correctly.You have posted all tools for unlocking but have not given there description as which one is to be used for which device.
The upgrading method is also not correct,as I gather it's more like it's for G4 devices,you cannot do this method for G3 device,it's misleading here.
I'll advise you to first understand it all fully yourself,You still need a lot of reading to do and fully consume the process,rather posting a guide for Noobies!!!

Check Red markings for corrections :rolleyes:

hanmin
18-10-2007, 03:57 PM
nnakao, I like your effort of putting in answers in the forum. However, as what I've experience so far, it isn't much of a use, in most cases (i.e. some people just do not search). However, nice effort.

Further, I would also like to ask you a favour (probably a copy paste job), to check with the wiki (i.e. this page, top portion, "XDA-Wiki"), to see if there are relavant section (under Wizard) on stuff that you've just mentioned. If

(a) they already exist, double check it and correct them if necessary
(b) if they do not exist, add in there. Usually, others will just point newbiew into there, easier than to find your thread.

Thanks.

ultraprimeomega
18-10-2007, 05:24 PM
you got errors will post later more errors if more but here are some
----------------------------------------------------
"3. G3 = When you boot your HTC, it should say something like 2.xx.11. Any number less than 2.xx.11 is a G3 device. If I'm wrong, someone please let me know and I'll change it."

\/ \/ \/ \/ \/

A G3 device has the ipl and spl 2.xx

A G4 device has the ipl and spl 2.xx.xx
---------------------------------------------------

Wizard = The one of many names of the Cingular 8125 (HTC Wizard)
------------------------------------------------------

Remember to post in big red letters "I am not Responsible for you bricking your device" and "That this is only for G4 devices" so post the difference of g4 and g3 on top.

Andy2No
03-12-2007, 05:04 AM
After a couple of days of trying to search this forum for some basic explanation of some of the tools involved, I've come to the conclusion that it's next to impossible to find anything with the forum search engine.

The forum engine appears to filter out all three letter search terms, like ROM, IPL, SPL and NBF. Basically all the things I need to use as search terms get me nowhere. Put any one of those into the search box and you get no results, even though the forum is littered with references to them.

There are a couple of really useful threads, that have got me quite a long way, but I found them by searching the whole world with google, not by using the search engine in this forum. I'm sure plenty of other people have tried searching for the same information and just given up in despair.

Maybe some links to the correct information would have been more helpful than the criticism this thread received.

Here's quite a good place to start:

http://forum.xda-developers.com/archive/index.php/t-298613.html

If anyone can add anything to help demystify the process of flashing phones and using this forum, I'd be grateful.

Babysittah
03-12-2007, 06:37 AM
Yo, thanx anyway yo:)!