T-Mobile Wing haet Touch-IT V1/V2

[ztagged]

Seems like my Wing hates to take the Touch-IT rom.. I've tried updating it several times (closely following the directions) and each time, it simply locks up and freezes while copying the data.. I've let it go for over an hour before giving up and reROMing to the T-Mo issued ROM.

Any advice?

[ztagged]

I went back through the instructions, read everything (Hoping I missed a step) and I followed everything perfectly. I started with a clean RUU install, I copied and installed the cab, then soft reset. I ran the !_UPGRADE_ROM.bat file, and it hangs at "CopyFileToTFFS", forcing me to disconnect, boot into the ROM Loader mode, and reinstall the TMO Rom.

What in the world am I doing wrong? :mad: Do I need to CID unlock the phone first (Like the wizard)?


Edit: Is it normal to have a pop-up on the phone saying "Warning - Unknown Status"?


Maybe some more info might be of use..

IPL/SPL: 4.10.0000

[brad99]

Leave the "unknown status" popup alone. mine took about 12 minutes to complete. turn off any phone, data, wifi.

[gloryphi]

Takes me about 30 - 45 minutes. :( , but make sure to put the aregs.policies(sp?) zip file(open and installed) first, then do the flash. I've done it about 10 times on 3 different phones. It works!! One last note, make sure once your computer says successful (or something another blah blah blah), press and hold the two softkeys and then press the reset hole. do not let go of the soft keys until you see a screen that says "press green key to format", then your in business.

[megaman81]

It took me like 3 hours to successfully get the touch it 2 on my phone...

THe CRUCIAL STEP TO GET IT ON THE PHONE IS TO HARD RESET AFTER DONE!!! I wasnt doing that and thats wat was messing me up! Hard reset by holding the two soft-keys (on top of talk,end buttons) and press in the little hole (under volume key) with your stylus...
should do the job!