Need help flashing rom. Stickies don't help. {pix}

[theonlyisamu]

So I downloaded a wm6 rom, and I get a zip with 6 files in it. I don't know which one I should open to start the flashing process. the sticky never told you how to actually flash the rom, just what you should do/the pre-requesites before you flash.

They files are:
EnterBootLoader
RUUGetinfo
nk.nbf
RUUResource.dll
Vista_ROMUpdate utility
XP_ROMUpdate utility

here's the pic I included:
http://img138.imageshack.us/img138/5317/romscp2.jpg

Yes, I read the stickies, but they are not giving me any information on how to do this.

Thanks!:D

[akashastrega]

If you have Vista on your pc use the Vista rom update utility. If you have XP, use the xp rom update utility. MAKE SURE YOUR PHONE IS CID/SIM UNLOCKED FIRST!!!
If not, follow the directions in the unlocking for dummies sticky by Dr P.
Make sure you have a usb connection via active-sync, and your pc screensaver is disabled, and you have a good 10 minutes for the flashing process. Once you choose Vista or XP, simply click then follow the directions...make sure you tick any/all boxes before hitting next or update.

**I attached a pic for you**

[theonlyisamu]

If you have Vista on your pc use the Vista rom update utility. If you have XP, use the xp rom update utility. MAKE SURE YOUR PHONE IS CID/SIM UNLOCKED FIRST!!!
If not, follow the directions in the unlocking for dummies sticky by Dr P.
Make sure you have a usb connection via active-sync, and your pc screensaver is disabled, and you have a good 10 minutes for the flashing process. Once you choose Vista or XP, simply click then follow the directions...make sure you tick any/all boxes before hitting next or update.

**I attached a pic for you**
Thank you! so I don't need to enter my phone into boot loader mode or anything?

[raskell]

Thank you! so I don't need to enter my phone into boot loader mode or anything?

No, the RUU will set the phone into bootloader during the process. Knowing how to get into bootloader is helpfull in the undesired event that something goes wrong during the flash. Remember to remove your memory card before flashing.