PDA

View Full Version : Stuck in BA WM6 Upgrading


conosciani.m
29-10-2007, 05:15 PM
I'm Stuck in BA WM6 Upgrading.
I was at the HTC_Blueangel_WM6_Wizzard Upgrade 4
After execute the installer file I performed a Hard Reset
Colored stripes (the bootscreen) will appear on the screen but I can't ge no debugger screen at all: the BA remain in Bootscreen with R 1.11.0 at the right bottom of the screen.The battery was full. I've tried the mtty procedure as well...no way out. Any clue ????

ct2gwj
31-10-2007, 10:43 AM
Have you follow all this steps here?

http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM6_WizzardUpgrad e1

conosciani.m
31-10-2007, 06:09 PM
Yes I did and now I'm Stuck at
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM6_WizzardUpgrad e4

ct2gwj
02-11-2007, 01:01 AM
And what device do you have in fact? Qtek 9090? Other??

Mine is a Qtek 9090 and didn't have any trouble...

Heinzibua
02-11-2007, 03:04 PM
Same problem here, wm6 was already running; downgraded to 2003 SE to repartition the extrom, wanted to flash to wm6 again; now my xda3 is stucked after flashing, only r 1.10.0 is shown, no chance to carry on...???

conosciani.m
02-11-2007, 03:55 PM
I've got imate pda2k ct2cwj...and Heinzibua I'm stuck on R 1.11.00 do you have an Imate as well ??? cause I guess the official XDA procedure doesn't work for this kind of model (mine was an Italian W2003).
I'm very upset about this...

Heinzibua
02-11-2007, 04:04 PM
@ conosciani.m

wm6 worked well on my xda3 , problem was only after repartitioning the extrom.

conosciani.m
02-11-2007, 05:52 PM
I'm going to think I did somenthing wrong during the extrom steps..so i've returned back to wm2003 and I'm going to try the upgrade again

Heinzibua
02-11-2007, 07:23 PM
please tell me, if you find the solution...

Heinzibua
03-11-2007, 09:51 AM
i repartitioned storage in 2003SE set to 20000 kb.
flashed to WM6, no problem now, storage is 41,25 MB, but running !!!

conosciani.m
03-11-2007, 03:14 PM
I did it too, I had to reinstalled w2003 and dit the Upgrading BA WM6 wizard again.....
after UNHIDE the rom, this time (and not in the previous upgrading), I did it the rom format using MTTY after that I ran the upgrade procedure and I got the WM6 running.
Happy for both of us to reach the goal......

Heinzibua
03-11-2007, 06:07 PM
do you have 60 MB storage now ?
can you give me more infos about MTTY ?
thx


tried to set storage to 60mb again, stuck again, also if i do just the same procedure as yesterday it is stuck; start to hate this device.
please tell me, what you did exactly to make it run. tried mtty also, but don´t know, what to do...

SilverSamurai
12-11-2007, 07:26 AM
try this...

1. downgrade to 2003
2. copy the utils to the phone(extrom utils and repart_doc.exe)
3. install extrom utils...
---a. tap unhide... ok.
---b. tap unlock... ok. may throw an error but still ok...
---c. reset...
4. run Repart_DOC
---a. Set it to 128 byte
---b. Go/Start/Format (it should succeed)
5. reset to bootloader
---(press and hold record + power button then stick reset)
6. flash WM6 ROM
7. cold boot (press and hold power button then stick reset)
8. (optional) if stuck in the "tri-color"(white isnt a color :D) screen...
---Hard Reset. Using No/Yes/Yes option.

reading further about the Repart_Doc topics...
128byte is the smallest you can format/resize the extrom
to maximize the storage in WM6.

Heinzibua
16-11-2007, 08:25 AM
Thx, thatīs exactly what i did many times without success...
but now it works, after upgrading radio rom there also was no problem with upgrading to WM6; 60 MB rom; i only want to upgrade to radio rom 1.15, then iīm happy.

thx everybody for your help