"SDHC card patch WM5 and WM6" working

[lepsyfou]

SDHC card patch (Freeware)
Requirements: Windows Mobile 6 PocketPC tested with other WindowsMobile version
Overview: Patch for PPC running WM6 for reading 2,4,6,8 GB SDC cards. This patch allows you to use 2,4,8 GB SDHC cards in your WM6 PPC.

[No Screenshot provided]

What is SDHC?
SD High Capacity (SDHC) card is the new SD™ memory card based on the SDA
2.00 specification, introduced by the SD Card Association. This new SDA 2.00
specification enables SD cards to reach higher capacities - 4GB-32GB*.
Because SDHC works differently then standard SD cards, this new format is not
backwards compatible with legacy SD format host devices.
More SDHC compatible devices are expected to be available in the second half of 2006.
To ensure compatibility, look for the SDHC logo on cards and host devices (cameras,
camcorders, etc.)
Compatibility with SDHC 4GB:
4GB SDHC cards can only work with SDHC compatible host
devices. To ensure compatibility, look for the SDHC logo on
the packaging. Please check with your device manufacturer
for their current/future supported SDHC devices.

Tested on Loox n520, MIO A701 wm5 WM5 HERMES .OTHERS..and working

http://img177.imageshack.us/img177/4662/screenshot001pf4.png



ps: Made a backup in case if it is not work (fr:faite une sauvegarde au cas ou si ca fonctionne pas)

[dgattenb]

I thought the Touch could already read 2 and 4 GB cards? etc...

[lepsyfou]

yes This is not only for the touch but also for other pocket this thread topic

[Dr J]

is this possible on WM5, and if so, when? :D


edit-

was gonna test it on my Hermes WM5 with the 6Gb card from my Touch, but the ReadMe is kinda garbled and i don't wanna do the wrong thing...

instructions?

[lepsyfou]

The test, if it works, leave us a comment,thanks I have wm6 make a backup before course

teste le, si ca marche , laisse nous un commentaire, moi j'ai wm6 fais une sauvegarde avant bien sur

[lepsyfou]

"test from my friend" commentaire:
"Since I updated to WM 6 the SDHC patch was installed automatically. But for WM 5 this hack would be a nice one.."

[Dr J]

IT WORKS ON MY WM5 HERMES!

i copied the .dll files to the device Windows folder, installed the Certs cab, then the SDHC cab, took out my 1Gb microSD and put in my 6Gb microSDHC, soft reset.... and it worked!

checked through it, all files there, browsed through my music with Audio Manager, played various tunes. all working fine.


took the 6Gb back out and put my 1Gb regular card back in and it is still working fine as well.

GREAT WORK! :D :D :D

[lepsyfou]

je suis content pour toi..
I am happy for you

[NP9660]

Anyone now how much gig a Artemis with rom B&B4.3 can handle without this patch ? I have now 2gig inside and that works fine, but i dont now if it support more ? Thnx

[Dr J]

pretty sure 2GB is your limit without this patch.

[lepsyfou]

par defaut 2GB max for artemis, With this patch it can recognize more

"avec ce patch il peut reconnaitre plus"

[thierryb]

This patch do not work on the Xda Flame.
Or more precisely, with this patch my to 2gb card is no more visible.

[zandadoum]

This patch do not work on the Xda Flame.
Or more precisely, with this patch my to 2gb card is no more visible.
hm... in some old posts with patches that didn't work for me, i read about ppl. patching and not seeing their 2gb card anymore, but when they used a 4gb sdhc or bigger, it worked. did you try that?

[zandadoum]

2) Overwrite /Windows sdbus.dll sdmemory.dll

how to overwrite those files? when i try (i use resco explorer) it sais that files are protected by system and i can't overwrite them.

[Dr J]

This patch do not work on the Xda Flame.
Or more precisely, with this patch my to 2gb card is no more visible.

my regular 1GB card was not recognised by the Hermes after patch installation UNTIL i'd tried the 6GB card, which showed up fine, then swapping the cards back over, the 1GB appears with no problem.

[evojulz]

The SDHC DLL's will only read non SDHC cards that are formatted to FAT32. Try reformatting you old 1&2GB cards.

The drivers from this thread look like the ones that have been batted around in E-TEN forums with various levels of success on HTC devices.

If these don't work for you, have a look here (http://forum.xda-developers.com/showthread.php?p=1636544&postcount=5) for more options.

[cancakmak]

does this patch function ok with my 6815 ?

as i learned from this forum that sdhc is just a driver problem not a hardware problem. So , if we can find the drivers we can use it with wm5 devices.

[famewolf]

Anyone with a wizard model phone (minisd) reported this working with 4gb or larger cards?

[mj0955048500]

SDHC card patch (Freeware)
Requirements: Windows Mobile 6 PocketPC tested with other WindowsMobile version
Overview: Patch for PPC running WM6 for reading 2,4,6,8 GB SDC cards. This patch allows you to use 2,4,8 GB SDHC cards in your WM6 PPC.

[No Screenshot provided]

What is SDHC?
SD High Capacity (SDHC) card is the new SD™ memory card based on the SDA
2.00 specification, introduced by the SD Card Association. This new SDA 2.00
specification enables SD cards to reach higher capacities - 4GB-32GB*.
Because SDHC works differently then standard SD cards, this new format is not
backwards compatible with legacy SD format host devices.
More SDHC compatible devices are expected to be available in the second half of 2006.
To ensure compatibility, look for the SDHC logo on cards and host devices (cameras,
camcorders, etc.)
Compatibility with SDHC 4GB:
4GB SDHC cards can only work with SDHC compatible host
devices. To ensure compatibility, look for the SDHC logo on
the packaging. Please check with your device manufacturer
for their current/future supported SDHC devices.

Tested on Loox n520, MIO A701 wm5 WM5 HERMES .OTHERS..and working



ps: Made a backup in case if it is not work (fr:faite une sauvegarde au cas ou si ca fonctionne pas)


thank you share for us ,thanks

[rublin]

Unfortunately, this patch does not work for Imate Jamin (Prophet G3) with WM6 (Magician 1.0). After installing it, I still can read my old 2GB SD card, but I cannot read 4GB SDHC card.

[juanter]

it works in may loox 560 but when i try to connect with my wifi don`t find the wireless adapter, if you found that works in loox 520 it has to be the same for my Loox 560. You could explain how made it work?

I am using a Transcend 150x of 4GB but it worked without the SDHC card patch, but i am thinking to buy a 8GB.

Sorry for my english.

[pepcisko]

Anyone with a wizard model phone (minisd) reported this working with 4gb or larger cards?

gimme a few days, my 4gb sdhc card is on the way :D
Just for curiosity, I installed the patch in advance ;) no problems so far, the wizard can see my 1GB card formatted with fat32 ..

[lepsyfou]

So we have to format its microsd in fat32 before installing the patch ...?


donc il faut formater sa microsd en fat32 avant d'installer le patch...?

[cancakmak]

i still want to have clear and stable answers. I want to realease that i can use sdhc with wm5 (6815) or i have to buy 2gb cards.

please someone must clerify this !

[evojulz]

So we have to format its microsd in fat32 before installing the patch ...?


If you are formatting your new SDHC card you should use something like this (http://panasonic.jp/support/global/cs/sd/download/sd_formatter.html) designed especially for SDHC.

If you plan to use a non-SDHC card adding the DLL's and installing certs.cab then you should format it to FAT32, I first read about it here (http://eten-users.eu/index.php?showtopic=11390&hl=sdhc%20patch&st=15) last month.

If you flash your ROM from your card then you should format it back to FAT16 first as after the ROM flash you may not be able to read a FAT32 card (device specific).

If would be good to hear from owners of a Touch or something with standard SDHC support to see if they can read FAT16 formatted cards??

i still want to have clear and stable answers. I want to realease that i can use sdhc with wm5 (6815) or i have to buy 2gb cards.

please someone must clerify this !

I would like to clarify this but I still don't have a SDHC card. I'll be getting one anyway as there are WM6 ROM's for my P3600 that have built in support but I'll try my best to get it to work on WM5 first.

Problem is that DLL files are very device specific so what works for one device may not work for others. There are other SDHC DLL options around the forum to try out though.

[thierryb]

I have formatted my microsd card with my PC in Fat32 then my card is always not reachable on my Flame with this patch.

[juanter]

i try with my SD 4GB not SDHC in FAT16 and it works, but like i say before with the SDHC patch don´t find the wireless adapter. Is there anymore with this problem?

[stonedagain]

can anyone confirm sdhc working on xda orbit running original wm5 (ger) rom?

[zandadoum]

tested on a P3300 with original HTC WM6 rom and a sandisk 2GB card (wanted to install the patch and test later at home with a 4GB sdhc card)


it stopped reading the 2GB card... so i guess with this patch installed, you can't read "non-sdhc" anymore.


will try with other card tonight.

[zandadoum]

ok, confirmed. the patches and instructions in this post did NOT work for me. HTC P3300 with original HTC WM6 rom.

procedure:
i have my 2GB card plugged in. the patch is in a folder on the rom. resco explorer is installed (on the card tho)

1) i execute SDHC.CAB, i am asked to reboot, stuff still works.
2) after reboot i copy the DLLs to the windows folder with resco. i am asked to overwrite and i check the file dates in \windows to make sure it worked.
3) i execute CERTS.CAB and once done,
4) i turn off the phone, switch to my 4GB (sandisk 4gb microsdhc)

i turn on and... no card. i go into configuration->memory ... sais no card.

i try to reformat the card with my PC, i have tried this file systems with NO success:
FAT:no
FAT32:no
NTFS:no
EXT2:no
EXT3:no


so... i'll wait for a single CAB that does it all. the guys who did the new roms will hopefully release one soon.


the thing is, this whole files posted here, remind me of a fake patch i tried several month ago. i remember this due the weird TXT that comes with it. it didn't work back then and it's not working now.

[mcwarre]

Any feedback on this patch and the Wizard? I am desperate but do not have a SDHC to test.... PLEASE ;)

[wperdomos]

OMG i been triying for months to get away my reset loop problem on my s621!!

AND THIS DRIVER DONE IT!!!

I had to remove my 2gb sd card (fat32) every time i reset, was anoying because if i took much time to insert it had the storage card2 bug (really really anoying)

Omg im so gratefull, i read a lot of times that bug involve the omap850_sdhc.dll but on my device cant be renamed or replaced.

I just apply the pacth and done! now i can reset turn it off removing battery or at any metod and no more reset loop :)

P.D. I dont know if work on sdhc for me (i guess yes) so i dont have any sdhc to test

Ill gonna put a link to here on every loop forum ive visited.

[T3D0nG]

what is the highest capacity of Mini-SD currently? :)

[blazingwolf]

Doesn't seem to work on the i760.:(

[hblago]

Any feedback on this patch and the Wizard? I am desperate but do not have a SDHC to test.... PLEASE ;)


Do not work for my wizard with wm6. Even trying the panasonic format mode. I have tested a kingston 4 Gb SDHC.

But we will find a way. I really hope.

[mmbhm]

okay - i'm obviously a moron. where are the dll's your supposed to use to overwrite the original files?

[mmbhm]

Never mind. found them.

[mmbhm]

On the SCH-i760

1. overwrote the two dlls
2. used the sdkcert
3. ran the sdhc cab.
4. soft reset
still only reading 1.7 gbs

Any other ideas? this is driving me nuts.

[mnn123]

Has anyone tried this patch on HTC P3300 WM6 and does it work?

And how do I install the patch? (If it works)

Regards
Mogens

[komser]

I installed first the certs.cab and afterwards the sdhc.cab.
Now, I see my SDHC card, but only the 4 GB, not the whole 8 GB.

My other problem is, that I'm not able to replace the two dll files (using active sync) --> reason: the file is in use and can not be replaced.

my device:
FSC T810 with GERMAN WM5 (Smartphone Edition)
8 GB CLASS2 Hama storage card

[Menneisyys]

I installed first the certs.cab and afterwards the sdhc.cab.
Now, I see my SDHC card, but only the 4 GB, not the whole 8 GB.

My other problem is, that I'm not able to replace the two dll files (using active sync) --> reason: the file is in use and can not be replaced.

my device:
FSC T810 with GERMAN WM5 (Smartphone Edition)
8 GB CLASS2 Hama storage card

Copy them to for example the storage card and, then, use the local (!) Resco or File Explorer to copy them to \Windows

[neros]

Copy them to for example the storage card and, then, use the local (!) Resco or File Explorer to copy them to \Windows

Don´t work...same error..

any solution?

[roisagi]

i tried it on my JASJAM WM5:
doesnot work corectly:
after device sleeps - i turn it on again - and it cannot access "start" menu.
only phone works and "today" works -
everything else gets stuck:

any ideas?

[evojulz]

Don´t work...same error..

any solution?

If Resco can't replace them while they are in use you could try:

1) rename the two files in \Windows\ from .dll to .old
2) then copy the new files to \Windows\ and soft reset
3) then delete the two .old files

[hblago]

If Resco can't replace them while they are in use you could try:

1) rename the two files in \Windows\ from .dll to .old
2) then copy the new files to \Windows\ and soft reset
3) then delete the two .old files

Is easy. You install SDHC.cab. But DON'T RESTART. Replace the files, and after install certs.cab. Now, you get a soft reset.

I proceed this way. However, my card don't work :(

[Exitao]

You could also try removing your storage card and rebooting the phone. Maybe the card keeps the driver in use...

[yixiar]

I've done fellowing your instruction.

it does NOT work in my MDA WIZARD.

Waiting for more good news :)

[Maggy]

Anyone tested with Himalaya?

[gjeremie]

hi

Don't work on acer n311 Wm5
After installation can't see normal SD or SDHC

wait for another update...

[Menneisyys]

A specifically Dell Axim x51v-related thread is at http://www.aximsite.com/boards/x50-x51-forums/219755-sdhc-driver-original-aku-2-3-1-rom.html

[Olioaglio]

A working SDHC patch for HTC Artemis WM6 versions found here:
http://forum.xda-developers.com/showthread.php?t=345038&highlight=sdhc+patch

Tested and works great. Just install, softreset and you are set ;)
Don't know if this one works on other devices though.

Olioaglio

[pepcisko]

A working SDHC patch for HTC Artemis WM6 versions found here:
http://forum.xda-developers.com/showthread.php?t=345038&highlight=sdhc+patch

Tested and works great. Just install, softreset and you are set ;)
Don't know if this one works on other devices though.

Olioaglio

not working on Wizard.

[neros]

Not working on Qtek s200,replace files with resco explorer 2007,but not working on my Qtek:(

[MHarris48]

Disappointed with WM6's ActiveSync 4.5->VPN->Exchange functionality so flashed back to WM5 & of course WM5 does not support my 8GB Sandisk card like WM6 did.

I installed the patch but it looks like the max it recognized is 4GB?:confused:

The only issue is the amount of memory it is reporting via settings|memory:
Total = 3,686.50 MB (should be ~ 8,000 MB)
In use = 2,493.75 MB
Free = 1,192.75 MB

[Steven855]

Disappointed with WM6's ActiveSync 4.5->VPN->Exchange functionality so flashed back to WM5 & of course WM5 does not support my 8GB Sandisk card like WM6 did.

I installed the patch but it looks like the max it recognized is 4GB?:confused:

The only issue is the amount of memory it is reporting via settings|memory:
Total = 3,686.50 MB (should be ~ 8,000 MB)
In use = 2,493.75 MB
Free = 1,192.75 MB
Perhaps WM5 partitioned the sdhc card into 2 4gb paritions?

[SubZero5]

any working patch for WM2003SE? I have an Alpine: Qtek 2020i

[bellec]

This is my first post, so I hope this isn't a totally newbie question. I have the new Verizon Samsung 760 and just purchased a 6gb microSDHC card.

My phone wouldn't even see this card, but my computer no problem.
I found this site and found the patch from the 1st post. I was able to only run SDHC.CAB and Certs.CAB.

My phone now sees the card at 1719MB.

From the read me file on patch:
SDHC Driver

1) Install SDHC.cab
2) Overwrite /Windows sdbus.dll sdmemory.dll
3) Install Certs.cab

Soft reset.

How do I do step 2???
When I performed steps 1 and 3, all I had to do was click on the application and my phone loaded it. When I tried to do step 2 and click on sdbus and sdmemory I get this error "There is no application associated with "sdbus".
I'm sure this is why my phone is not reading the proper size.

Thanks in advance!

[selangkahlagi]

A working SDHC patch for HTC Artemis WM6 versions found here:
http://forum.xda-developers.com/showthread.php?t=345038&highlight=sdhc+patch

Tested and works great. Just install, softreset and you are set ;)
Don't know if this one works on other devices though.

Olioaglio

Just a question, can you access your normal SD card after you install that driver ? I guess you can use only SDHC card, Please let me know. :)

[basmoq]

This is confirmation that the file labeled sdhc.cab works for the HP IPAQ HX2495b I can view my 4gb card at full capacity, and can also still view my older 2gb cards!!!

[speedpete]

Hi there.
I just tested the sdhc patch and it worked after some tries on my LG KS20.
But just for 4 GB Sandisk cards.

And after some warm resets the dll files get lost and I have to redo the hole process.

Anyway, many thanks for helping me!

[mollier]

THE ONLY WAY to overwrite the old .dll with the new one is to rename both of them ("sdbusold" & "sdbusnew"), then put the new into the WIN-dir and name it back to "sdbus"<nothing_else>(.dll, depending on whether your Windows mobile is configured to file-endings or not), then reboot the system and delete the "sdbusold"-file [or not... if you don't care about free disk space and s*** ;-)].

IT IS OF NO IMPORTANCE AT ALL WHETHER THERE IS A CARD INSERTED OR NOT, SO DON'T MIND TRYING OR PROVE ME WRONG (if you're all h4x0r 'n so...)!!!

Greetings,

mollier

PS: The SDHC workaround works fine with a SANDISK 4GB card and my LG KS-20 (not supported officially). "VEEERY NIICE" (Borat)

[Leonard8808863]

I tried it on my Zinc. The sdbus and sdmemory cannot be replaced. It worked at first then files in the sdhc got corrupted for some unknown reason. Now I can't get it to work anymore.

I can't find the sdbus or sdmemory in file explorer but whenever I copy the new ones to /windows, pc prompts me it already exists.

[Keitaro]

Not working for me either on my Vario with english version of SuperRom ( http://ppctuning.org/?page=Superrom1.1 )

1) Backed up my existing 2Gb FAT16 card to my PC.

2) Reformat that card to FAT32 and copy contents from backup on PC to 2Gb FAT32 as well as 4GB SDHC.

3) Installed SDHC.cab. Did NOT reset.

4) Opened Resco and renamed sdmemory.dll and sdbus.dll to sdmemory.dll.old and sdbus.dll.old

5) Pasted in the dlls from the SDHC zip and confirmed the "overwriting files in ROM blah" dialog box. Then double checked the correct date stamps on the dlls in \Windows, and they were the right ones.

6) Installed Certs.cab.

7) Powered down the Vario and then powered up.

8) 2Gb FAT32 not recognised. 4Gb SDHC not recognised. Double checked in Resco and File Explorer to make sure they didn't show up as "Storage Card2" instead. No luck.

I also tried everything from Step 3 onwards but with a soft reset after Step 3 but no change, still no cards readable.

In order to get things back to normal (no SDHC drivers etc) I simply went to Settings -> System -> Remove Programs -> SDHC drivers -> Uninstalled them then soft reset. No need to change the dlls in \Windows or remove Certs.cab (since there is no entry for it in Remove Programs). So I'm back to good old 2Gb MiniSD support again :(

[pharmartacist]

this apps cant instaal on ba wm6 instanly not reading my sd card

[DronM]

In Toshiba G900 this patch work and I see my 4Gb sdhc Storage and normally work, but after device sleeps, i turn it on again -and it cannot access to the card and i must reset system. After reset storage normally work again. Any ideas?

[waverbob]

Installed the patch on my HTC TyTN with WM5.
Wi-Fi doesn't connect, it says that the key is not correct, but it's not true.

[DronM]

Installed the patch on my HTC TyTN with WM5.
Wi-Fi doesn't connect, it says that the key is not correct, but it's not true.

I have this problem too in Toshiba g900! :confused:

[waverbob]

Finally I've tested the SDHC patch on my WM5 TyTN and the 4Gb micro SDHC Sandisk is working perfectly. Next test with the 8Gb card

[labelexec@gmail.com]

i have a verizon xv6800 and 6gb card and it works beautifully.

[waverbob]

Finally I've tested the SDHC patch on my WM5 TyTN and the 4Gb micro SDHC Sandisk is working perfectly. Next test with the 8Gb card
After some days of test I have this problem: all seems OK with the 4 Gb microSDHC, but only if the hermes stays alive all the time. After a standby (even after a few seconds of standby) the storage card doesn't work anymore and often the hermes freezes and it needs a soft reset. No way to change this behaviour.
Any suggestions?

[zivelik]

sory but i didn't succeed to install the program SDHC on my 4700
can you tell why ?

[zivelik]

can't install sdhc on my wm6 ipaq 4700
have you ny idea

[damcis]

I have an Audiovox XV6800, I installed the SDHC.cab and tried to copy over the sdbus.dll and sdmemory.dll files in the windows directory, but it says it can't overwrite them. Is some program using those files? If so, what is it?
I used Total Commander to try to copy them instead of file explorer.
I have a 6gb microSDHC card.

Would appreciate any insight y'all might have.

Thanks.

[THEDLO]

has anyone figured out how to do for the i760?!?!?!?!?!?!:confused:
i would really like an 8 GB to work on my phone!:(

some one should perfect this and sell the crack!!


THDLO

[kms108]

I have an Audiovox XV6800, I installed the SDHC.cab and tried to copy over the sdbus.dll and sdmemory.dll files in the windows directory, but it says it can't overwrite them. Is some program using those files? If so, what is it?
I used Total Commander to try to copy them instead of file explorer.
I have a 6gb microSDHC card.

Would appreciate any insight y'all might have.

Thanks.

use rar and zip the two files, then use pocketrar and overwrite the files.


kms

[8525newuser]

After some days of test I have this problem: all seems OK with the 4 Gb microSDHC, but only if the hermes stays alive all the time. After a standby (even after a few seconds of standby) the storage card doesn't work anymore and often the hermes freezes and it needs a soft reset. No way to change this behaviour.
Any suggestions?

I'm having the exact problem with my 8525 running WM5. After installing SDHC.cab I can read and write to either of my 4gb microSDHC cards just fine until the phone goes into standby mode. Then the cards will not read properly until following a soft reset. Often times the device just freezes. Both my 2gb microSD cards work well all the time. It's as though the registry gets changed or something during standby mode that causes sdmemory.dll or sdbus.dll to work differently after waking from standby. Any help would be appreciated. Thanks.

[Olioaglio]

Just a question, can you access your normal SD card after you install that driver ? I guess you can use only SDHC card, Please let me know. :)

Yes, works fine with 2GB Card, too!

[johnnyv5]

Ran the cab on my Nephew's XV6700 with 2.05 orginal ROM and it works fine. He hasn't tried writing files to it, or taken out of the phone, but I'll post if he runs into any troubles.

jv

[thunder6290]

I installed it on hp ipaq 6955 ( 6900 series ) and it installed successfully .
the speed of browsing the card is amazing . just one PROBLEM. my phone browse no problem and shows all files and folders, but after few minutes, i can browse the folders, but some folders in my sd shows empty ( nothing shows when i go to the folder ).
as soon as i eject the card and put it back in or do the reset, it works for few minute then again the same problem .
any suggestions ?
I'm using kingston minisdhc class 6 .

[8525newuser]

I installed it on hp ipaq 6955 ( 6900 series ) and it installed successfully .
the speed of browsing the card is amazing . just one PROBLEM. my phone browse no problem and shows all files and folders, but after few minutes, i can browse the folders, but some folders in my sd shows empty ( nothing shows when i go to the folder ).
as soon as i eject the card and put it back in or do the reset, it works for few minute then again the same problem .
any suggestions ?
I'm using kingston minisdhc class 6 .

This is the same issue as described above in posts #70 and #76, but yet another characteristic of the behavior. Anyone want to try to tackle this issue?

[THEDLO]

i760=8GB card please!
help and guidance!!

[thunder6290]

This is the same issue as described above in posts #70 and #76, but yet another characteristic of the behavior. Anyone want to try to tackle this issue?

I'm sure there are people here who can help for this issue.
come one people . all of us ( windows mobile phone owners ) know how its like to have more capacity and more speed on memory cards.

So please help us solve the issue !!!!!!!!!!!

[P S Y C H O]

i have a verizon xv6800 and 6gb card and it works beautifully.

Same Here...

THANKS lepsyfou!!!
:)

[indoline]

installed it on my iPAQ TravelMate. It works, but not all the way.

My 8GB card shows as a 4GB card. It's better than not reading it at all, however.

[Thoemsi]

Thank you guys. This SDHC driver works just fine with my LG KS20. No problems at all.

WM6
8GB microSDHC

[Ralph Smeets]

The driver works with an LG KS20 and a SanDisk 4GB microSDHC-card. Thanks \o/

[Kpyto]

Is it patch REALLY work on Qtek 9100 (HTC Wizard) WM 6 ??

:eek:

[dferreira]

Is it patch REALLY work on Qtek 9100 (HTC Wizard) WM 6 ??

:eek:
No, it doesn't work on the Wizard...

[invictus_92]

I find it hard to believe that a patch has not been made for the HTC 8525 to resolve this large sdhc microsd issue. I was able to use my 6gb microsd perfectly fine on the standard HTC/AT&T wm6 burn. With an upgrade (for feature purposes) now I've lost that. neither fix that i've found works.

I know most of the people on here are electronically/mechanically smarter than me... so hop to it! lol! Us techno geeks depend on the code geeks to keep us in our "my phone is hotter than your piece of crap" status.

that's all. please help.

thanks.

[CambaAmba]

Hi,
IPAQ WM5 SDHC patch works fine on rw6815 4GB SDHC Kingston class 6 and on old Scandisk 2GB SD card. Take a look at:
http://forum.xda-developers.com/showthread.php?p=1757791#post1757791
So far no side effects has been noted.
Amba Camba
HP IPAQ rw6815 WM5
ROM 1.12.00 WWE

[pmpcmartins]

I've patched it but unfortunately I can't tell if it's working with the 4GB Micro SD on my hermes under official wm6 because I'm not able to format the card and the wm6 does not recognize it.
I've tried to format it on my laptop, on my pc and finally on my photographic machine.... yes I know... but I've tried everything and I'd like to hear some suggestions from you to solve this problem before writing to the guy o sold me the card on ebay.
Thankx.

[Balam_Ak_Ab]

HI

I proof this patch in my XDA Flame, and I have some conlusions:

1.- the first patch SDHC_WM6WM5.zip, don't work with the XDA flame.
2.- The second patch sdhcArtemis cab.zip Don't work too.
3.- SDHC Support Kit hurricane and QTEK9100.cab It¿s works, but have some troubles:

The access is too slow(some pics dont recognize fine,and the file its OK)
The mp3 and mp4 don't read by TCPM, only I can use windows media.
And have a trouble wioth the wifi(I don't know Why with, because all the rest fucntions works fine, only with I active the WIFi the XDA flame its frozen, If someone, tell me why?)

I hope this problems can be resolve, for next upgrades.
I very happy with this patch, with the problems with I said before, ,I very happy, but I can Use My 4gb Kingston Microsd, I use 2gb too And I dont have any problems with normal microsd cards. I treat to Proof with another SDHC cards, too upgrade this review. Thanks for all.

[guinhill]

Hello everyone, I have been the proud owner of a X500+ for about a week now, and I to wanted to have as mutch as possible memory avadable.
After a lot of work and searching this forum ( and the Dutch tweakers.net fora ) I got as far as 100% acces to the 8GB Scandisk card I bought today.

The sollution posted here ( overwrite 2 .dll files after installing SDHC.cab ) did not work for me, I could not overwrite the files in /windows. I was stuck a 4GB accesable space.
So I came to the conclusion that it would be better that those .dll files would be installed as the inital files.
I got a demo of WinCE Cab manager, and used the 20 min you get for better ;-) and recompiled the cab with the 2 .dll files you need.
I could not get round to Including the Info from Certs.cab so you still need to run that one to after resetting. But then you should be fine.
I have it working on my X500+, and I hope It will help you ( or shorten your install ) to.
Greetings Guinhill
SDHC updater download:
Rapidshare http://rapidshare.com/files/79454221/SDHC_v071227.zip.html

[thunder6290]

helo,

if someone have the original .dll files from hp ipaq 6955, i really apriciate it if you can upload it to the forum

thanks

[gaspareau]

Hello

Here they are

Can you just tell us if you find a patch
that work without bugs for a 6955 please

[liomojo]

HI

I proof this patch in my XDA Flame, and I have some conlusions:

1.- the first patch SDHC_WM6WM5.zip, don't work with the XDA flame.
2.- The second patch sdhcArtemis cab.zip Don't work too.
3.- SDHC Support Kit hurricane and QTEK9100.cab It¿s works, but have some troubles:

The access is too slow(some pics dont recognize fine,and the file its OK)
The mp3 and mp4 don't read by TCPM, only I can use windows media.
And have a trouble wioth the wifi(I don't know Why with, because all the rest fucntions works fine, only with I active the WIFi the XDA flame its frozen, If someone, tell me why?)

I hope this problems can be resolve, for next upgrades.
I very happy with this patch, with the problems with I said before, ,I very happy, but I can Use My 4gb Kingston Microsd, I use 2gb too And I dont have any problems with normal microsd cards. I treat to Proof with another SDHC cards, too upgrade this review. Thanks for all.
i have i-mate 6150 and they all work for me but there is a major problem WIFI STOPS WORKING and the device freezes. can anybody help me with this

[Greenturtle]

Well I have one of those NON SDHC 4gb Mini-SDs for my Wizard and that works fine anyway but I thought I would try out my 8gb Micro from my Touch Dual and test it with the old Wizard.

I can confirm that this did not work with the Wizard. (WM6 ROM).

[thunder6290]

Hello

Here they are

Can you just tell us if you find a patch
that work without bugs for a 6955 please

thanks for the dll files.
i didn't find it yet . but i'm guessing something which i'm working on it .
I was too busy last week .

basically i red in microsoft forum that from windows mobile 4.0 everytime u insert the card in the phone or if phone comes out the resume, windows call a function in registry which is "ResetOnResume" which may cause this error or a power management of the card .
this is the link to the source : http://msdn2.microsoft.com/en-us/library/ms836803.aspx
if anyone else tries to work on it as well, maybe this issue can be solved in near future .

[jeanfrederic]

Hi everybudd. I'm new in here and loockin for some nice stuffs for my N311 Acer WM5 0.24 ROM. As i plan to try the WM6 coocked ROM, i'd like to know if you think this trick works on both ROMs ??
Thank you

[joshrys]

On the SCH-i760

1. overwrote the two dlls
2. used the sdkcert
3. ran the sdhc cab.
4. soft reset
still only reading 1.7 gbs

Any other ideas? this is driving me nuts.

i'm having the same problem. the i760 seems to have different issues ten most phones with alot of apps. i had big problems with the htc home plugin and also (s2u2 until the latest version).

[Desertboy]

Please help - dont work Micro SDHC 6 gb

[spdermn10]

SDHC card patch (Freeware)
Requirements: Windows Mobile 6 PocketPC tested with other WindowsMobile version
Overview: Patch for PPC running WM6 for reading 2,4,6,8 GB SDC cards. This patch allows you to use 2,4,8 GB SDHC cards in your WM6 PPC.

[No Screenshot provided]

What is SDHC?
SD High Capacity (SDHC) card is the new SD™ memory card based on the SDA
2.00 specification, introduced by the SD Card Association. This new SDA 2.00
specification enables SD cards to reach higher capacities - 4GB-32GB*.
Because SDHC works differently then standard SD cards, this new format is not
backwards compatible with legacy SD format host devices.
More SDHC compatible devices are expected to be available in the second half of 2006.
To ensure compatibility, look for the SDHC logo on cards and host devices (cameras,
camcorders, etc.)
Compatibility with SDHC 4GB:
4GB SDHC cards can only work with SDHC compatible host
devices. To ensure compatibility, look for the SDHC logo on
the packaging. Please check with your device manufacturer
for their current/future supported SDHC devices.

Tested on Loox n520, MIO A701 wm5 WM5 HERMES .OTHERS..and working

http://img177.imageshack.us/img177/4662/screenshot001pf4.png



ps: Made a backup in case if it is not work (fr:faite une sauvegarde au cas ou si ca fonctionne pas)


I BROUGHT A 4 GB CARD FOR MY TREO 700WX (WM5). THE SDHC PATCH WORKS GREAT ON MY TREO. THE PROBLEM IS I CANT GET THE 4GB CARD TO READ ON MY DESKTOP. HELP?

[Maggy]

Please help - dont work Micro SDHC 6 gb

The i-mate ultimate 6150 should have standard support for both SD and SDHC, did you install any drivers/software/ROM that might have messed it up? If not, your xda seller should be able to help you.

[Maggy]

I BROUGHT A 4 GB CARD FOR MY TREO 700WX (WM5). THE SDHC PATCH WORKS GREAT ON MY TREO. THE PROBLEM IS I CANT GET THE 4GB CARD TO READ ON MY DESKTOP. HELP?

Use WM5torage, a utility that makes your SD(HC) card accessible as a USB mem stick for your PC.

[fastboy]

Hi i have dell axim x51v and i was frustrated that the hcsd 4gb card didnt work.
the driver i downloaded here helped
thanks a lot
:)
btw there is wm5 on my axim x51v so it works with wm5 (somebody asked on previous posts)

[8525newuser]

There is no sub directory titled High Capacity within the directory SDMemory_Class into which a line DisablePowerManagement can be added on the 8525 running WM5. The BlockTransferSize = 64 parameter is in the SDMemory_Class folder, as well. If someone can post the series of registry entries that will enable SDHC.cab to continue working after restarting from standby mode, please post them here. Meanwhile, I am using two standard 2gb microSD cards that contain all the files - music, pictures, and videos - I had on one 4gb microSDHC card. All programs that I had installed to the 4gb card are copied to both 2gb cards. One card is in the device and the other is in my wallet. Swapping according to what I want to hear or view is simple, and works. This is only slightly inconvenient, but not nearly as inconvenient as having to perform soft resets all day long in order to use the 4gb microSDHC card. Any help is appreciated!! Thanks.

[dbhajek]

Hi guys

How do you get to the .dlls that you need to change?

Do I need something special or can I use explorer on the sync?

Thanks
Bud

[wmvfan]

will it work on a blue angel with windows mobile 6

[arys64]

Guys, I have a Treo 750 with WM6. I try the patch and it worked perfectly. Thanks, You rock!!!! :D

[joshrys]

any luck yet for users of the i760? is there any smart haxor out there even working on the situation?

[arys64]

will it work on a blue angel with windows mobile 6
you install the first .CAB file and it will ask you to restart, don't restart. copy/paste the .DLL files on the windows folder. you can do this trough the file explorer from your mobile. Then install the final .CAB file and do a manual reset.

[arys64]

Hi guys

How do you get to the .dlls that you need to change?

Do I need something special or can I use explorer on the sync?

Thanks
Bud
You install the first .CAB file and it will ask you to restart, don't restart. copy/paste the .DLL files on the windows folder. you can do this trough the file explorer from your mobile. Then install the final .CAB file and do a manual reset.

[charlyg]

hi all,
I have an Airis T620 a clone of MIO P550 with WM5, did anybody install the patch on it successfully? :confused:
thanks....

[marcinl]

doesn't work with FS c550 (WM5) + crash WiFi and normal SD

[11nn93n9]

will it work on a blue angel with windows mobile 6

Does WM6 have SDHC suport built-in?

[11nn93n9]

Hi guys

How do you get to the .dlls that you need to change?

Do I need something special or can I use explorer on the sync?

Thanks
Bud

totalcommander.

[11nn93n9]

Totalcommander.

Please ignor.

[Robby69]

Hi,

on the FS N560 (WM6) SDHC is working, slow but it is working.
Unfortunately WLAN is still not working.
Is there already a version with WLAN available?

[inagas]

Hello!

I'm using WM5 on X500 device

I have 8GB micro SDHC Scandinsk

Have tried several times and ways different patchs, (SDHC_WM6WM5...) and all that I manage is to read up to 4GB.

I don't know if it is necessary to run on WM6, or if it is possible with WM5 to have full access to the micro card.
Is there another patch for WM5?

(Also have tried to upload to WM6, but after having problems with v_key one time, not upgrading properly via activesync another time, and so on, have decided to follow on WM5 wich works properly.)

Thanks a lot

inagas

[istaines]

There are a huge number of posts to this thread where people report various successes with "the patch" (sic). Unfortunately no one is very specific about what "the patch" is or where to download "it".

There appear to be several patches out there and some variations on how to apply them and it is not clear what is the appropriate patch to apply.

I am looking for a solution for WM5, specifically ipaq 6955. Does anyone have a suggestion as to which patch to apply and where to get it?

[Exitao]

There are a huge number of posts to this thread where people report various successes with "the patch" (sic). Unfortunately no one is very specific about what "the patch" is or where to download "it".

There appear to be several patches out there and some variations on how to apply them and it is not clear what is the appropriate patch to apply.

I am looking for a solution for WM5, specifically ipaq 6955. Does anyone have a suggestion as to which patch to apply and where to get it?
The patch is downloadable in the first post of the thread. The blue coloured words above his sig.

[Tyr]

Ok, I have a Wizard 200 and I can't change the dll files as they are in the rom. I can't copy them for backup purpouses and obviosly can't overwrite them as they are protected. I am using totalcomander to move the files about.

I know I'll loose wifi if this works, I don't mind if I can get 8GB of storage.

Any suggestions?

[eriche]

I always get an error that I can not overwrite the 2 *.dlls :eek: on my LG KS20 :o

Via ActiveSync or on the KS20 I can not find the dlls in /Windows.
But I get the message that they are in use and can not be overwritten - when I thry the dlls from the archive "SDHC_WM6WM5.zip".

Please HELP :rolleyes:

Greet`s Erich

[red_hanks]

Hi.

I have an O2 XDA IIs with WM6 CE OS 5.2.1620 build 18125.0.4.2.

I purchased a Sandisk 4gb SDHC micro SD card.

I tried to install the driver that you post here but it does not work and my XDA won't read my original Micro SD card 2gb.

I tried to uninstall the sdhc.cab and my XDA can read my 2gb micro sd card but still it wont read my SDHC 4gb card.

Sir, I hope you can help me with this so I can use my 4gb sdhc card.

Thank you in advanced.




RED_HANKS™

[teixeirabmb]

This drivers won't work with Blueangel, at least they didn't work in mine.
To uninstall just use add and remove on settings, sk tools or similar app.

[eriche]

Please help me with my problem.
I have no chance to overwrite "sdbus.dll" and "sdmemory.dll" in WINDOWS :mad:

Also tried to unregister the dlls with "cgacutil.exe /u sdbus.dll" but ALWAYS I get the Message that the DLLs are in Use :eek:

Edit:
I get the following ErrorMessage

File '\windows\sdmemory.dll' is in ROM memory! You cannot delete it

ROM Memory is write Protected - isn`t it?

Nobady got the Problem?
Today I get my 4GB SDHC Mini Card - so please give my hints,...

Greet`s erich

[11nn93n9]

There are a huge number of posts to this thread where people report various successes with "the patch" (sic). Unfortunately no one is very specific about what "the patch" is or where to download "it".

There appear to be several patches out there and some variations on how to apply them and it is not clear what is the appropriate patch to apply.

I am looking for a solution for WM5, specifically ipaq 6955. Does anyone have a suggestion as to which patch to apply and where to get it?

My experience is the patch can make the HW6900 read the 4GB mini sdhc card after a reset or insert. But once the device goes to sleep and wakes up again, the card is not readable. So it is not a pratical working solution. Don't bother. Its better using 4GB minisd instead of using mini sdhc.

[red_hanks]

so are you guys telling me that there is no way I can use my 4gb micro sdhc card on my O2 XDA IIs a.k.a. BlueAngel?????

[ccoichb]

i have download the three patch of sdhc, but i can not install them into my atom exec(windows mobile 6). pls tell my why? thx

[eriche]

Is this thread dead?

People are asking questions but the people who could help are not willed to answer?

I still have the problem that I can not overwrite the both *.dlls because they are in ROM :rolleyes:

Greet`s Erich

[Jeanean]

I have a LG KS20 and the patch sdhc.cab works really well to read a 4Gb micro sdhc card !

Thank you !

[eriche]

@Jeanean

can you tell me which from the 3 files you used from the 1st page?
Did you only use the "sdhc.cab" or did you also overwrite the dlls and then applied the "certs.cab" :confused:

SDHC Driver

1) Install SDHC.cab
2) Overwrite /Windows sdbus.dll sdmemory.dll
3) Install Certs.cab

Soft reset.

Did you go this way - maybe it is not neccessary to replace the dlls?

Greet`s Erich

[hole-in-one]

@all,

did somebody tested the package with ipaq hx4700 and kozhura's wm6?

Thx,
hole-in-one

[mugglesquop]

excellent! thanks very much! been looking for WM5 solution for a while...

[Anjil]

Have a 4gb SDHC card & an older 256mb SD Card.. applied the patch and could not see either the 258mb card or the 4gb!!

Does it mattter that there is a card in the slot when applying the patch? :confused:

[sabbathbh]

excellent! thanks very much! been looking for WM5 solution for a while...

Has anyone got an 6GB SDHC Card working in WM5 with any of the updates ? Which device brand/model ? Which update ?

The best I got in WM5 on my iPAQ 6945 was the 4GB SDHC working in full capacity with the SDHC.cab update. The 6GB with the SDHC.cab update show only 1.8GB. Partitioning in small partitions does not fix it either.

The updates that need to overwrite the DLLs and install Certs.cab make the device not working with any SD Card (even 2GBs non SD cards). I think this updates that require Certs are just for WM6, am i wrong ?

Thanks for any info,

Leonardo

[teixeirabmb]

so are you guys telling me that there is no way I can use my 4gb micro sdhc card on my O2 XDA IIs a.k.a. BlueAngel?????
Seems like it!
I tried a lot of drivers unsuccessfully.

[mugglesquop]

just installed... CABs installed ok, but it wouldnt let me overwrite the .dll files :confused: any help?

[11nn93n9]

just installed... CABs installed ok, but it wouldnt let me overwrite the .dll files :confused: any help?

You can use totalcommander to overwrite the dlls. Make a copy of the dlls first since if they do not work, you'll need to put them back.

[mugglesquop]

You can use totalcommander to overwrite the dlls. Make a copy of the dlls first since if they do not work, you'll need to put them back.

ok thanks, i was trying to use Resco Explorer, but couldnt even rename the .dlls :confused:

Will try TC!

[dungvietsec]

[QUOTE=red_hanks;1813440]Hi.

I have an O2 XDA IIs with WM6 CE OS 5.2.1620 build 18125.0.4.2.

I purchased a Sandisk 4gb SDHC micro SD card.

I tried to install the driver that you post here but it does not work and my XDA won't read my original Micro SD card 2gb.

I tried to uninstall the sdhc.cab and my XDA can read my 2gb micro sd card but still it wont read my SDHC 4gb card.

Sir, I hope you can help me with this so I can use my 4gb sdhc card.

Me too, got the same problems, the SDhost device no longer Work with any Sd Card. I forgot to backup the two files .dll and purchased 8GB kingston class 8. Now, Flashed ROM and using SDHC as 8GB USB Storage. But I still hope oneday has the respond patch.

[eriche]

ok thanks, i was trying to use Resco Explorer, but couldnt even rename the .dlls

I have the same Problem - with Resco Explorer I can not Overwrite the dlls - but it seams nobody gives a sh...

Maybe mugglesquop you can tell me how you could finally overwrite them - when you are successfully!

Greet`s Erich

[8525newuser]

I have the same Problem - with Resco Explorer I can not Overwrite the dlls - but it seams nobody gives a sh...

Maybe mugglesquop you can tell me how you could finally overwrite them - when you are successfully!

Greet`s Erich

All you who are having trouble copying the .dll files - did you try the zipped file in post #93 in this thread, which installs them for you? I don't use it personally, but it looks as though you simply install the sdhc_v071227 cab, which automatically overwrites the 2 .dll files as well, then install the certs.cab. No copying or pasting or renaming according to the readme document contained therein. Those .dll files do not work on my device - only the ones dated 7/15/2007 that are installed with the original sdhc.cab. However, that cab stops working in WM5 after awakening the device from sleep mode, and the device must be soft reset or the card removed and reinserted to begin working again. Also, for devices with Intel processors, sdhc.cab disables wifi on the device, but does not for devices with Samsung processors. I think the sleep/awake problem exists for WM5 regardless of processor. I've been all over the internet and these are my discoveries. I do not know anything about the behavior of cards that exceed 4gb sdhc.

[eriche]

MANY THanX 8525newuser

I will give that a try :)

And if it doesn`t work - it`s nice you told us - because the Pros are maybe anoyed by our questions and keep in background giving no support,...

It should be possible to greate a new *.CAB Package with the new Dlls from the first page.

Let`s see if I can do this.

Greet`s Erich

[mugglesquop]

I have the same Problem - with Resco Explorer I can not Overwrite the dlls - but it seams nobody gives a sh...

Maybe mugglesquop you can tell me how you could finally overwrite them - when you are successfully!

Greet`s Erich

Erich,

I downloaded Total Commander, and used used this to copy the files. It seems that Resco did re-name the old .dlls tho... which seems strange. anyway, Total Commander is the answer :)

[george0]

it works on my wm6 ppc by overwriting those two dll files with total commander. i did not even install certs.cab. does anyone know what the certs.cab file does?

I ran into a bit of minor issue with the wake up from suspend where some apps stop responding, but as long as I force close the app and re-open, it reads the SD again w/o problems.

I also run into conflict with WIFI which stopped working after SDHC driver is installed, and if I uninstall SDHC driver, then Wifi starts working again.

thanks for everyone's input here

[mugglesquop]

it works on my wm6 ppc by overwriting those two dll files with total commander. i did not even install certs.cab. does anyone know what the certs.cab file does?

I ran into a bit of minor issue with the wake up from suspend where some apps stop responding, but as long as I force close the app and re-open, it reads the SD again w/o problems.

I also run into conflict with WIFI which stopped working after SDHC driver is installed, and if I uninstall SDHC driver, then Wifi starts working again.

thanks for everyone's input here

the Certs.cab is for WM5 :)

[ioncila]

Hi
I have a question, I dont know if someone have already answered that:

I own a QTEK 9100 that supports mini SD cards (I have one 2gb). I run wm5.

There´s a patch in the first post named "SDHC Support Kit hurricane and QTEK9100.cab (66.5 KB)".

Is this the right path for me?

I really want to be sure before i go to to purchase that kind of memory cards.

Thank you for your time.
Ioncila

[Alicanko]

SDHC card patch (Freeware)
Requirements: Windows Mobile 6 PocketPC tested with other WindowsMobile version
Overview: Patch for PPC running WM6 for reading 2,4,6,8 GB SDC cards. This patch allows you to use 2,4,8 GB SDHC cards in your WM6 PPC.

[No Screenshot provided]

What is SDHC?
SD High Capacity (SDHC) card is the new SD™ memory card based on the SDA
2.00 specification, introduced by the SD Card Association. This new SDA 2.00
specification enables SD cards to reach higher capacities - 4GB-32GB*.
Because SDHC works differently then standard SD cards, this new format is not
backwards compatible with legacy SD format host devices.
More SDHC compatible devices are expected to be available in the second half of 2006.
To ensure compatibility, look for the SDHC logo on cards and host devices (cameras,
camcorders, etc.)
Compatibility with SDHC 4GB:
4GB SDHC cards can only work with SDHC compatible host
devices. To ensure compatibility, look for the SDHC logo on
the packaging. Please check with your device manufacturer
for their current/future supported SDHC devices.

Tested on Loox n520, MIO A701 wm5 WM5 HERMES .OTHERS..and working

http://img177.imageshack.us/img177/4662/screenshot001pf4.png



ps: Made a backup in case if it is not work (fr:faite une sauvegarde au cas ou si ca fonctionne pas)

Hi I am from Turkey.I've gigabyte gsmart i120 and I've upgraded to winmobile 6...I wonder that,can I use sdhc cards.For example;I want to buy 8 gb micro sd with mini sd adapter...I need your help please reply soon...!

[Alicanko]

Hi I am from Turkey.I've gigabyte gsmart i120 and I've upgraded to winmobile 6...I wonder that,can I use sdhc cards.For example;I want to buy 8 gb micro sd with mini sd adapter...I need your help please reply soon...!

[buhuu]

Hey there, I have a HTC P3600 (not the I version), with Windows Mobile 5 runing the last official rom upgrade (from the official page + the tomtom thing), currently I have a 1GB Sandisk card, I was planing buy a: "Sandisk Micro SDHC 8 GB" (is class 4)

Now what I relay need to know is, IF I apply your "fix", can I realy be able to use this card?, I'm asking because I dont' want order a card where I won't be able use anywhere case it don't :P

So, if this fix also applies to the official last rom for HTC P3600, please let me know, and I'll order card asap :D

Thanks

[Tyr]

So nobody knows if this actually works with the Wizard AKA Qtek 9100, XDA Mini-S........? I am quite sick of my 2GB card and at least want 4GB. Seems the non SDHC 4GB cards have disappeared off the market.

[new2city]

well, so far, it doesn't work on my Wizard Dopod 838.. and my Kingston SDHC 4 GB mini SD..

[Tyr]

That is what I thought... :(

Oh well... I guess I'll have to save up for an iPod touch and run my phone in router mode if I want to use the browser on it out and about.

The lack of storage space is the most annoying thing. I guess I could just save for a more up to date model which does support SDHC and 3G...

[istaines]

My experience is the patch can make the HW6900 read the 4GB mini sdhc card after a reset or insert. But once the device goes to sleep and wakes up again, the card is not readable. So it is not a practical working solution. Don't bother. Its better using 4GB minisd instead of using mini sdhc.

Thanks. I was not able to read a 6GB card in WM5 on the HW6955 with "the patch". (Do not have a 4gb card to try.) I tried both the original patch SDHC_WM6WM5.zip using Resco's File Explorer to overwrite the dll's (I think it actually overlays the versions of the dll's in ROM with a shadow copy) and using the modified patch SDHC_v071227.zip that includes the dlls in the cab file.

Still not 100% sure I am using the "correct" patch for WM5 as most people that are reporting success are doing so with WM6.

[Gagetman]

I got the SDHC patch to work on my HP hw6945 Smartphone (running WM5) on a 4gig mini SDHC card.

I downloaded the SDHC_WM6WM5.zip patch to my PC and unzipped it. Then copied the entire unzipped folder onto my 1 gig SD card storage card.

Using the WM5 File Explorer I changed the name of SDBUS.dll to SDBUS-old.dll and changed SDmemory.dll to SDMemory-old.Dll.

Using the File Explorer I ran SDHC.cab file from the storage card which installs the new SDBUS.dll and SDmemory.dll into WM5's Windows folder. After which, it does a soft reboot. Then from the unzipped folder on 1gig SD storage card I ran the Certs.cab.

I got a free 7-day version RESCO
([url http://www.resco.net/pocketpc/explorer/[/url]) to format the 4gig SDHC storage card Fat32 (3.74 gigabytes). I will purchase RESCO because of this feature.

Everything works just as expected.

[sabbathbh]

I got the SDHC patch to work on my HP hw6945 Smartphone (running WM5) on a 4gig mini SDHC card.

I downloaded the SDHC_WM6WM5.zip patch to my PC and unzipped it. Then copied the entire unzipped folder onto my 1 gig SD card storage card.

Using the WM5 File Explorer I changed the name of SDBUS.dll to SDBUS-old.dll and changed SDmemory.dll to SDMemory-old.Dll.

Using the File Explorer I ran SDHC.cab file from the storage card which installs the new SDBUS.dll and SDmemory.dll into WM5's Windows folder. After which, it does a soft reboot. Then from the unzipped folder on 1gig SD storage card I ran the Certs.cab.

I got a free 7-day version RESCO
([url http://www.resco.net/pocketpc/explorer/[/url]) to format the 4gig SDHC storage card Fat32 (3.74 gigabytes). I will purchase RESCO because of this feature.

Everything works just as expected.

I also have the HP HW6945. You don't need all this steps to get the 4GB SDHC working. Just install the original SDHC.cab, reset and it's working. If you want to go back for any reason just uninstall from "Remove Programs". No need to copy DLL files anywhere or install the Certs.cab.

The question that remains unanswered: any way to get the 6GB SDHC fully working in WM5 ? Just WM6 users got it working so far...

Leonardo

[george0]

I also got it working on my hw6945 a while ago, but the frustrating thing was that if the unit goes into suspend/sleep, after you turn it on it would not recognize the card any more. I would have to re-insert the card for it to show up again.

I tried all the diff suggestions like DisablePowerManagement in the registry, powerstate change for dsk1: in the registry, etc but to no avail. if anyone has better luck I'd love to know.

[vlekje]

Does anybody has a working SDHC driver (4GB or higher) and his wifi SDIO card also working ?

(I f.e. have a SDHC 4 GB and wifi spectec SDIO SDW 820)

thanks for reply

[solatges]

After the patch, as lot of people, I just can see 3,7 gb on my 8gb card.. I have a C800 phone.Can you fix that ?
Regards

[FireSox]

i have a trinity 4gb sdhc and it doens´t work...

[rasto777]

I have Acer n530

4GB SDHC Kingston - > works without problems

8GB SDHC kingston -> only first 4GB ... so I use gparted and create only big extended partition and inside two 4GB partitions

rgds

r.

[anicolac]

Hello to all, I Have a MiniSDHC in my triniti p3600, it works well, but the reader of cards of my PC does not detect them.
It is possible that it is a question of the hardware, or as this patch (driver) also there is other one for the PC that does that it works?

pardon for the translation

Muchas gracias.

[flaviopac]

Touch already works with 4 gb card.....

[zetoune]

How can I replace DLL?
I get an "access denied" message when I try to replace them or rename them. I tried with File Explorer and Windows Explorer through ActiveSync. Same thing. It doesn't work.

Any help plz?

[solatges]

"8GB SDHC kingston -> only first 4GB ... so I use gparted and create only big extended partition and inside two 4GB partitions"

So,your device can see the 2 partitions?
Are the two partitions formated in fat32 and are logical partition? Cause I have tested that and no result.. my phone cant see any card.
Thanks

[george0]

please refer to this thread for windows xp related sdhc issues
http://forum.xda-developers.com/showthread.php?t=313262

Hello to all, I Have a MiniSDHC in my triniti p3600, it works well, but the reader of cards of my PC does not detect them.
It is possible that it is a question of the hardware, or as this patch (driver) also there is other one for the PC that does that it works?

pardon for the translation

Muchas gracias.

[wmvfan]

Ha sanyone run this driver sucsessfull on a Blue angel ?
can´t test, because i have not upgrade to WM 6 yet

[george0]

btw has anyone found any workaround for the WIFI being disabled by the SDHC drivers in phones with Intel processors???

has anyone got their WIFI still working after SDHC drivers are installed? (for phones with Intel processors I mean)

thanks

[8525newuser]

btw has anyone found any workaround for the WIFI being disabled by the SDHC drivers in phones with Intel processors???

has anyone got their WIFI still working after SDHC drivers are installed? (for phones with Intel processors I mean)

thanks

No one has ever posted a fix for this anywhere. SDHC.CAB disables wifi on Intel processors, but not on Samsung processors.

No one has posted a fix for the SDHC.CAB that corrects the problem of failing to read a card greater than 2gb after being restarted from sleep mode without either reinserting the card or performing a soft reset.

I am beginning to doubt whether these issues can be fixed at all.

[chp]

Thanks! I'm still testing it out, but it looks like the SDHC.cab located in SDHC_WM6WM5.zip enables SDHC support on the Pantech duo with the AT&T WM6 ROM.

[chp]

Thanks! I'm still testing it out, but it looks like the SDHC.cab located in SDHC_WM6WM5.zip enables SDHC support on the Pantech duo with the AT&T WM6 ROM.
Well, some clarification. Before the patch, a microSDHC was not recognized. After the patch, microSDHC is recognized but only the first 2GB is accessible. Next step?

[rasto777]

"8GB SDHC kingston -> only first 4GB ... so I use gparted and create only big extended partition and inside two 4GB partitions"

So,your device can see the 2 partitions?
Are the two partitions formated in fat32 and are logical partition? Cause I have tested that and no result.. my phone cant see any card.
Thanks

its tricky...

device see two partitions with real size ...and thats all

usable are only first 4GB ... :(

[thunder6290]

hello everyone
i was away for few month .
anybody here have any idea about why this patch works on 6945 but not for 6955 ?
what is a difference between these to ?
the hardware i think is exactly the same .
it is something in the registry which need to be changed i beleive .

can someone guess the difference or post all the registry settings which controls the sd or can compare two models together ?

it really anoying that hp leaves all the ipaq owner without any support so maybe we can help each other and next time NO HP .:mad:

please if someone can help .

[amm_hazz]

1) First install the SDHC.cab file into the main memory ==> is ok


2) then copy the 2 dll to \windows directory ==> is ok


3) and then install certs.cab ==> is ok

install prosedure no problem. my 8gb sdhc can be detect in my xo1ht 7,6gb.

my problem after 30menit (x01ht is idle) , my 8gb sdhc automatically detact(can't detect).if 8gb remove and re insert in my x01ht ,8gb sdhc can be detect.

always remove and reinsert,remove reinsert...... big problem....:confused:

help me for solution...

[espinozza]

thank you
i have fix my ipaq rx1950 for slow data reading from sd card
installed the sdhc patch and my devise works good!!!!!::)

[red_hanks]

it Is Impossible Guys!!!

Sd Hc Will Not Work On Our Ba!!!

and No One Is Willing To Help!!!

We Are Just Running Around Here


:d

[dirlan2001]

it Is Impossible Guys!!!

Sd Hc Will Not Work On Our Ba!!!

and No One Is Willing To Help!!!

We Are Just Running Around Here


:d

Finally someone who talks sense.... The SD-host cannot and will not detect/see/read/write SDHC cards. It's a hardware-issue that can not be fixed with some drivers....

[gregoryx]

Huh? I thought so, too, a while ago.

But SD-only PCs running Windows XP can be upgraded to SDHC with a patch.

And my Samsung i760 that would only read a 2G microSD card now reads 4G microSDHC.

The articles I've read suggest it is not a hardware difference, but a driver difference. I know Wikipedia isn't good enough for many folks, but this article on SD memory (http://en.wikipedia.org/wiki/Secure_Digital_card#SDHC) is simpler and more concise in describing the difference as a memory addressing difference.

I'm pretty sure from what I've read that it IS a driver difference, not a hardware difference. That said, that would mean it is a question of how each piece of SD hardware needs the driver to work with it to interpret the data appropriately. I think this is why my Samsung i760 can now read a 4G SDHC - when it could not read any SDHC previously - but can not yet read anything larger than 4G. Ideally, the appropriate driver will be discovered (BJ2 maybe?) to take it up another notch.

[beveridge]

I also have problem with losing my 4gb sdhc card after suspend/power cycle.
I have ipaq rx5915.

I have tried registry edit of disablepowermanagement with no sucess.

If anyone finds solution please let me know...
dave@beveridges.info

[joshrys]

Huh? I thought so, too, a while ago.

But SD-only PCs running Windows XP can be upgraded to SDHC with a patch.

And my Samsung i760 that would only read a 2G microSD card now reads 4G microSDHC.

The articles I've read suggest it is not a hardware difference, but a driver difference. I know Wikipedia isn't good enough for many folks, but this article on SD memory (http://en.wikipedia.org/wiki/Secure_Digital_card#SDHC) is simpler and more concise in describing the difference as a memory addressing difference.

I'm pretty sure from what I've read that it IS a driver difference, not a hardware difference. That said, that would mean it is a question of how each piece of SD hardware needs the driver to work with it to interpret the data appropriately. I think this is why my Samsung i760 can now read a 4G SDHC - when it could not read any SDHC previously - but can not yet read anything larger than 4G. Ideally, the appropriate driver will be discovered (BJ2 maybe?) to take it up another notch.

i used the drivers from the original BJ, which if i put my 6Gb card in, it detects the whole card (using the latest wm6 released from ATT) when I put those files on my i760 it still only sees 1.7x Gb. It's not solely the drivers, it's something else also. I think the drivers only allow the OS to see the card, but there's something else that determines how much it can see... or perhaps it's the driver that needs to be matched to each piece of hardware. I'm no driver expert, but can the actual .dll driver be modified somehow?

[gregoryx]

Everything I've read - other than a couple of non-authoritative BS posts here and there - suggests that there is no physical difference between a basic SD and SDHC reader; but that interpreting the information in that physical interface (the "driver") is the key difference. The "formatting" (my word... my way to understand it) is different and must have a driver that takes the bits coming from the physical reader and interpret them appropriately before presenting them to the operating system.

If my only experience were the i760, I'd feel less inclined to argue my point.

When my Motion LE1600 tablet would not read the 4G SDHC when I got it (microSDHC with adapter, actually), I was VERY pleased to find a driver update available from Microsoft to enable SDHC in Windows XP. I didn't expect that, since I had assumed SDHC was physically different.

Here (http://support.microsoft.com/kb/934428)'s that Microsoft patch. I didn't expect it to work since the SD slot on the LE1600 was not advertised as SDHC. But after other posts suggested this would work, I tried it. It did.

I've read many articles in my Google searches on this topic that suggest that it is only a driver difference between sizes as well as SD/SDHC.

I'm not sure posts - no matter how large the font - of certainty that this will never be resolved bear out against experts writing on the variances between these formats and storage sizes. :)

[red_hanks]

FROM:

http://pocketpccentral.net/news/7-18-06_sdhc_ppcs.htm

This was post last July 18, 2006 and it is Feb 2008 and still there is no support for us so we can use SDHC cards to our PPC mostly on my BA!!!

SanDisk, one of the world's best-known memory card manufacturers, is set to release their first SDHC, or Secure Digital High Capacity, flash memory card later this month. While physically identical to the Secure Digital cards sold over the past several years, SDHC features internal overhauls designed to take the SD card format to the next level of storage and performance. The SDHC standard is compatible with with memory chip capacities up to 32GB and transfer rates of 2MBps.

While the next-generation SD card is a welcome development, a potential problem looms: consumer confusion. SD and SDHC cards may look the same, but the new card requires different reader hardware, and that could lead to a fair number of disappointing purchases at first.



Unlike CompactFlash memory cards, which feature integrated hardware controllers, SD and SDHC cards depend upon card readers for hardware control. Because the faster and higher capacity SDHC cards require updated controllers, current SD card readers won't be able to use them. This includes the readers in all current digital cameras, MP3 players, smartphones and Pocket PCs. A Pocket PC user looking for 4GB of storage for his audio collection would soon find this newly-acquired SDHC card useless, at least for now.
Although there have been no announcements on the subject, it's safe to assume that most, if not all, Pocket PC manufacturers will begin incorporating SDHC readers in their next-generation handhelds. These updated readers would be able to use all Secure Digital cards, both the type we use today and the updated SDHC.

SDHC cards will be labeled with the updated logo shown above. For a limited time, SanDisk will include an SDHC-compatible USB card reader with every SDHC purchase. The reader won't help users looking to use the card with their handheld devices, but it will allow for faster transfers with a USB 2.0 computer.

[dirlan2001]

FROM:

http://pocketpccentral.net/news/7-18-06_sdhc_ppcs.htm

This was post last July 18, 2006 and it is Feb 2008 and still there is no support for us so we can use SDHC cards to our PPC mostly on my BA!!!

SanDisk, one of the world's best-known memory card manufacturers, is set to release their first SDHC, or Secure Digital High Capacity, flash memory card later this month. While physically identical to the Secure Digital cards sold over the past several years, SDHC features internal overhauls designed to take the SD card format to the next level of storage and performance. The SDHC standard is compatible with with memory chip capacities up to 32GB and transfer rates of 2MBps.

While the next-generation SD card is a welcome development, a potential problem looms: consumer confusion. SD and SDHC cards may look the same, but the new card requires different reader hardware, and that could lead to a fair number of disappointing purchases at first.



Unlike CompactFlash memory cards, which feature integrated hardware controllers, SD and SDHC cards depend upon card readers for hardware control. Because the faster and higher capacity SDHC cards require updated controllers, current SD card readers won't be able to use them. This includes the readers in all current digital cameras, MP3 players, smartphones and Pocket PCs. A Pocket PC user looking for 4GB of storage for his audio collection would soon find this newly-acquired SDHC card useless, at least for now.
Although there have been no announcements on the subject, it's safe to assume that most, if not all, Pocket PC manufacturers will begin incorporating SDHC readers in their next-generation handhelds. These updated readers would be able to use all Secure Digital cards, both the type we use today and the updated SDHC.

SDHC cards will be labeled with the updated logo shown above. For a limited time, SanDisk will include an SDHC-compatible USB card reader with every SDHC purchase. The reader won't help users looking to use the card with their handheld devices, but it will allow for faster transfers with a USB 2.0 computer.

Right, you think they'll get it now ?

[red_hanks]

Well, I don't think so. They're going to promote electronic gadgets that support SDHC so basically there will be no support for us...unless...santa will grant our wishes next christmas...lol...can't wait till dec 25, 2008..wahahahaha :)


what do you think MR. MODERATOR????

[gregoryx]

<sigh>

Authoritative-speaking fools are kinda tiring.

Yelling doesn't change facts.

If you've got the authoritative proof of your suspicions, please help us out by posting your proof and/or your credentials.

Otherwise, what you've got is not only worthless, it's damaging the potential for other people.

SD and SDHC are physically identical from everything I've read. Search. I can't seem to Google one up right now that I believe is adequately authoritative. I wish the Wikipedia post were better footnoted.

Here's my current proof:
Look up the specs on a Samsung i730 PPC Phone.
Published with the FCC for December, 2004 accoding to this: http://www.phonescoop.com/phones/phone.php?p=667
I'm sure you can find more proof of its age with searches.
I have upgraded it from WM2003 to WM5, but that shouldn't matter, right? That's not hardware, right?
It will read a 4G SD card, but NOT a 4G SDHC card (that's the only size I have to test with).
The i730 is NOT SDHC capable; only SD. No such thing as SDHC when it was released.
My 4G microSDHC that I run in my i760 (after loading a new driver, of course :cool:) should not - NO WAY - run in that i730, right?
Load the same SDHC.cab in the i730 - as I just did (my kids use the i730s as their iPod / GameBoys still) and insert the Kingston microSDHC into an SD-sized adapter and insert it.
It works.

Which is it?
Was Samsung so ahead of the curve that they made an SDHC device before SDHC was released?
Or is the reading of an SDHC card in an SD slot a matter of a driver?

Yeesh. What's your deal? :rolleyes:

Now... that said... I think we need some updated drivers for some of these devices... and to delete some posts. ;)

[red_hanks]

<sigh>

Authoritative-speaking fools are kinda tiring.

Yelling doesn't change facts.

If you've got the authoritative proof of your suspicions, please help us out by posting your proof and/or your credentials.

Otherwise, what you've got is not only worthless, it's damaging the potential for other people.

SD and SDHC are physically identical from everything I've read. Search. I can't seem to Google one up right now that I believe is adequately authoritative. I wish the Wikipedia post were better footnoted.

Here's my current proof:
Look up the specs on a Samsung i730 PPC Phone.
Published with the FCC for December, 2004 accoding to this: http://www.phonescoop.com/phones/phone.php?p=667
I'm sure you can find more proof of its age with searches.
I have upgraded it from WM2003 to WM5, but that shouldn't matter, right? That's not hardware, right?
It will read a 4G SD card, but NOT a 4G SDHC card (that's the only size I have to test with).
The i730 is NOT SDHC capable; only SD. No such thing as SDHC when it was released.
My 4G microSDHC that I run in my i760 (after loading a new driver, of course :cool:) should not - NO WAY - run in that i730, right?
Load the same SDHC.cab in the i730 - as I just did (my kids use the i730s as their iPod / GameBoys still) and insert the Kingston microSDHC into an SD-sized adapter and insert it.
It works.

Which is it?
Was Samsung so ahead of the curve that they made an SDHC device before SDHC was released?
Or is the reading of an SDHC card in an SD slot a matter of a driver?

Yeesh. What's your deal? :rolleyes:

Now... that said... I think we need some updated drivers for some of these devices... and to delete some posts. ;)



DON'T TAKE IT TOO MUCH BRO, YOU'RE JUST MAKING IT HARD FOR YOURSELF!

[red_hanks]

Oww finally...the real fool talks..

Think about this Mr. Sira Ulong Aso y Gregoryx if you think it is only the DRIVER..how come up until now we're still having this problem..it might be the driver like what you said Mr. Bumblebee or the hardware itself...

GOD!!!....is that all you do?

And making your letters as BIG as this does not mean you are yelling or shouting...sometimes it means that person is emphasizing that particular WORD...dumdum....

Oh for Pete Sake....Monday Crasher!!!!

[red_hanks]

:p grrrrrrrrrrr:mad:

[haleskw]

I am trying to install the patch to allow 4GB SDHC card to be read by a HTC P3300. When I try to copy the dll files into the windows directory as instructed it seems the directory is read only. I cant find a way to change this. Can someone please help.

[red_hanks]

I am trying to install the patch to allow 4GB SDHC card to be read by a HTC P3300. When I try to copy the dll files into the windows directory as instructed it seems the directory is read only. I cant find a way to change this. Can someone please help.

here we go again...
try to read sir...
anyway, use resco explorer...

[mugglesquop]

can someone confirm if this works with WM5? i have tried it on mine, and dont seem to get anywhere.

Thanks.

[Sniipe]

I've installed the first cab
copied the .dll's and overwritten the dll's in the windows dir using pocketpc
I've then installed the second cab file

soft reset

Everything is the same - my kingston 4GB miniSDHC card won't work with my Asus p535 (WM6)

I will keep trying other methods and report back here if I get it working.

[Iftin]

SDHC Support Kit hurricane and QTEK9100.cab no work!!! wizard (qtek 9100 G3) WM06
card miniSDHC 4GB Transcend class4

[new2city]

Hi guys, it's really getting depressing at the moment. Just tried Octaivoi WM6.1 v6.2 and there is no native support for SDHC... sigh... now, hoping to try if the patches make any difference ...

[dirlan2001]

Which is it?
Was Samsung so ahead of the curve that they made an SDHC device before SDHC was released?
Or is the reading of an SDHC card in an SD slot a matter of a driver?

Yeesh. What's your deal? :rolleyes:

Now... that said... I think we need some updated drivers for some of these devices... and to delete some posts. ;)[/QUOTE]







Yeah right, maybe we should delete YOUR posts....

BTW check out here : http://www.sdcard.org/about/sdhc/

Take a good look at the scheme that pops up right in front of your nose, and READ the comments .....

Good day to you, sir

[solatges]

... just explain me how my W800 from China can read a 4gb sdhc card after the patch (not the full 8gb).. Its not a native sdhc reader,isnt it? And why does it exist a full 8gb patch for wm5 ?
Thanx

[watchdog2003]

16 February 2008 using an existing 2Gb microSD Card in a Transflash Adapter
1. Download and copied to 2GB microSD card SDHC_WM6WM5.zip contains readme.txt, SDHC.cab, Certs.cab and a Windows folder that contains files sdbus.dll and sdmemory.dll
2. Select and run sdhc.cab, ppc restarted and using File Explorer device says no storage card exists. Removed program HTC SDHC, reset and storage card restored to normal.
3. Select SDHC.cab and Install HTC SDHC and choose device
4. Select Certs.cab and check successfully installed on your device.
5. Soft reset device
6. Select File Explorer and no storage card. Select Settings , Memory, Storage Card display gives “Not Installed”

9 February 2008 Changed
XDA registry WM6 existing key is SDMemory_Class
MDA registry WM5 existing key is SDMemory_Class

Add New Key High_Capacity
Add New DWORD Name Data
BlocktransferSize 64 (0x000040)
DisablePowerManagement 1 (0x000001)

Test SanDisk Micro SDHC 8GB Card with MobileMate Micro Reader and 8GB microSDHC card USB to desktop pc is OK

Is it possible that I have not followed your SDHC card patch procedure correct?

[dirlan2001]

... just explain me how my W800 from China can read a 4gb sdhc card after the patch (not the full 8gb).. Its not a native sdhc reader,isnt it? And why does it exist a full 8gb patch for wm5 ?
Thanx


Because your hardware uses a different adressing-type. It cannot access the full 8 GB because it's NOT compatible with the SDHC-hardware. No driver can fix that....

Dirk

[dirlan2001]

16 February 2008 using an existing 2Gb microSD Card in a Transflash Adapter
1. Download and copied to 2GB microSD card SDHC_WM6WM5.zip contains readme.txt, SDHC.cab, Certs.cab and a Windows folder that contains files sdbus.dll and sdmemory.dll
2. Select and run sdhc.cab, ppc restarted and using File Explorer device says no storage card exists. Removed program HTC SDHC, reset and storage card restored to normal.
3. Select SDHC.cab and Install HTC SDHC and choose device
4. Select Certs.cab and check successfully installed on your device.
5. Soft reset device
6. Select File Explorer and no storage card. Select Settings , Memory, Storage Card display gives “Not Installed”

9 February 2008 Changed
XDA registry WM6 existing key is SDMemory_Class
MDA registry WM5 existing key is SDMemory_Class

Add New Key High_Capacity
Add New DWORD Name Data
BlocktransferSize 64 (0x000040)
DisablePowerManagement 1 (0x000001)

Test SanDisk Micro SDHC 8GB Card with MobileMate Micro Reader and 8GB microSDHC card USB to desktop pc is OK

Is it possible that I have not followed your SDHC card patch procedure correct?

Same reply as to previous post.....

Dirk

[SamuelM4]

t works in may loox 560 but when i try to connect with my wifi don`t find the wireless adapter, if you found that works in loox 520 it has to be the same for my Loox 560. You could explain how made it work?

I am using a Apacer SDHC 8GB class6

Sorry for my english.

[Rickykdean]

It took me awhile to understand the instructions (I'm kind of slow with these things) but once it did it correctly it worked. I'm thrilled. I have an Ipaq rx5915. Thanks,

Ricky

[beveridge]

I also ahve ipaq rx5915. sdhc cab does not work afer power cycle. After standby mode it does not see sdhc card.

What did person do a couple of posts up to make it work.

[beveridge]

If anybody finds a solution to ipaq after stanby "losing sdhc" card please email me @ dave@beveridges.info + post on this site.

I have being searching for a while and many postes refer to this thread... so at least post solution here.

[jeeratda]

t works in may loox 560 but when i try to connect with my wifi don`t find the wireless adapter, if you found that works in loox 520 it has to be the same for my Loox 560. You could explain how made it work?

I am using a Apacer SDHC 8GB class6

Sorry for my english.

My BenQ P51 has the same problem.

[slackline]

Excellent... this works like a charm on my p3300 with a SanDisk 4Gb microSDHC card :-)

Thank you

[mugglesquop]

Excellent... this works like a charm on my p3300 with a SanDisk 4Gb microSDHC card :-)

Thank you

WM5 or WM6?

i cant get it to work with WM5? has anyone? :confused:

[SystemR89]

This patch won't work with my BlueAngel with WM2006 [BA ROM CE OS 5.2.19199 (Build 19199.1.0.0 PV DVH)]

After patching I can't use any sd card.

[8525newuser]

Hey everyone,

Please read the entire thread. Every issue you raise has been mentioned here before, many times over.

"I installed the patch and now I can't read any card."
"It does not work on my XXX."
"I can only see 1.7 gb of my 6gb card."
"It works fine on my YYY."
"It does not read the card after awaking from sleep mode."
"I can't copy the .dll files."
"Patch works, but I can't use my wifi."

Read the thread. All that is in here, over and over. For most there is no fix and never will be unless you flash your phone with a new rom. Instead of more and more of this, please find something new and refreshing to post here. Thank you.

[SystemR89]

Hey everyone,

Please read the entire thread. Every issue you raise has been mentioned here before, many times over.

"I installed the patch and now I can't read any card."
"It does not work on my XXX."
"I can only see 1.7 gb of my 6gb card."
"It works fine on my YYY."
"It does not read the card after awaking from sleep mode."
"I can't copy the .dll files."
"Patch works, but I can't use my wifi."

Read the thread. All that is in here, over and over. For most there is no fix and never will be unless you flash your phone with a new rom. Instead of more and more of this, please find something new and refreshing to post here. Thank you.

I know.
I would only advise other users that this patch doesn't work with Blueangel.

[madman34]

Is easy. You install SDHC.cab. But DON'T RESTART. Replace the files, and after install certs.cab. Now, you get a soft reset.

I proceed this way. However, my card don't work :(

did it on my titan and worked.

[madman34]

yep and now trying to fix it.

[Iftin]

hello!
working miniSDHC Apacer 4GB class 2 wizard 9100 G3 WM2006 http://forum.xda-developers.com/showpost.php?p=1963379&postcount=2

[beveridge]

sdhc Disappearing after standby ***SOLVED***

I have just changed these settings in registry on my ipaq rx5915 and seem to be having no problems with my 4GB sdhc card.

__________________________________________________ ____
HKEY_LOCAL_MACHINE\System\StorageManager:PNPUnload Delay
changed delay to 33186 (in decimal)

and

HKEY_LOCAL_MACHINE\System\StorageManager:PNPWaitIO Delay
changed delay to 33186 (in decimal)
__________________________________________________ ____

I used CeRegisrtyEditor to make these changes.

dave@beveridges.info


P.S. just checked pda again... it helps with standby but does not fix completely. It still loses card afer extended standby.

[cavalloz]

i can't install it on my qtek 2020, it says it can't install

[Zan808]

This SDHC patch works just fine with my LG MS20. Now i can use 2Gb in FAT and 8Gb in FAT32 perfectly. Thank you.

[Vittorinox]

I tried it and more others on a Eten G500+ and Qtek 9000, but without results: only one returns me 3.6Gb (fake...) instead 8Gb of my SDHC Card. All others return a message "Storage card is not installed". :(

[kamikaze_sg]

SDHC card patch (Freeware)
Requirements: Windows Mobile 6 PocketPC tested with other WindowsMobile version
Overview: Patch for PPC running WM6 for reading 2,4,6,8 GB SDC cards. This patch allows you to use 2,4,8 GB SDHC cards in your WM6 PPC.

[No Screenshot provided]


Tested on Loox n520, MIO A701 wm5 WM5 HERMES .OTHERS..and working

http://img177.imageshack.us/img177/4662/screenshot001pf4.png



ps: Made a backup in case if it is not work (fr:faite une sauvegarde au cas ou si ca fonctionne pas)


Hi lepsyfou,

There are three files, which one to install? Or have to install all three?
After installation, can i use both SDHC and normal SD card?

Thank you very much...:)

[kamikaze_sg]

SDHC card patch (Freeware)
Requirements: Windows Mobile 6 PocketPC tested with other WindowsMobile version
Overview: Patch for PPC running WM6 for reading 2,4,6,8 GB SDC cards. This patch allows you to use 2,4,8 GB SDHC cards in your WM6 PPC.

[No Screenshot provided]


Tested on Loox n520, MIO A701 wm5 WM5 HERMES .OTHERS..and working

ps: Made a backup in case if it is not work (fr:faite une sauvegarde au cas ou si ca fonctionne pas)


Hi lepsyfou,

There are three files, which one to install? Or have to install all three?
After installation, can i use both SDHC and normal SD card?

Thank you very much...:)

[Radek_PL]

Hi folks,

so... I am just about to buy two 4GB microSDs for two HTC Artemis phones with original Orange WM5 system. Installing WM6 is out of discussion as these aren't my phones, moreover, owned by company and there is no fine WM6 for Artemis in Polish anyway.

So.... Have anybody made the SDHC card running WITHOUT PROBLEMS on WM5 device (especially if Artemis?)
Please answer if you've really done it...

Thanksin advance, I'd appreciate if you also PMed me with this feedback.

Cheers
Radek:)

[mugglesquop]

Hi folks,

so... I am just about to buy two 4GB microSDs for two HTC Artemis phones with original Orange WM5 system. Installing WM6 is out of discussion as these aren't my phones, moreover, owned by company and there is no fine WM6 for Artemis in Polish anyway.

So.... Have anybody made the SDHC card running WITHOUT PROBLEMS on WM5 device (especially if Artemis?)
Please answer if you've really done it...

Thanksin advance, I'd appreciate if you also PMed me with this feedback.

Cheers
Radek:)

I've got a Artemis (original WM5 from T-Mobile) and have yet to find a way to get it to work. I've tried every method i could find :(

[juancosaco]

It works in my ETEN X500!!! thanks a lot!
:):)

[Tezza26]

hi folks, i have been trying for the past couple of days to get my o2 xda orbit mobile to find the sdhc 4gb memory card that i bought for it. ive been looking all over the internet to try and find out how to get it to work and its just impossible for me.

if anyone can help me id greatly appreciate it.

Thanks
Terry

[bidou]

Ok, so just like a lot of people around here, I'm unable to run this patch properly. I install the SDHC.cab on my KS20, it asks me to soft-reset, I refuse. Then when I try to install the .dll files, I'm unable to put them in the Windows folder, as it tells me that the files are read-only or something. Same problem if I try to rename or delete them, there is no way I can put the two .dll in the Windows folder.

I install then the Certs.cab, and finally I soft-reset the damn PPC. On the Windows Mobile loading screen, it invites me to boot in safe mode, I do nothing in order to boot in nomal mode. Then I try to browse on my 8 GB SDHC card : it's not detected. New soft reset, new safe mode thing : my card is detected, but only as a 3.6 GB card, which is better than nothing, but not as good as if it was detected as a 8 GB card.

So, does anyone have a solution ? It's kind of obvious that the problem comes from the fact that I can't replace the .dll files.

[erik71]

It works on my mio A201...great, tnx a lot:)

[hibbins1203]

thanks a lot. I will try.

[mugglesquop]

Ok, so just like a lot of people around here, I'm unable to run this patch properly. I install the SDHC.cab on my KS20, it asks me to soft-reset, I refuse. Then when I try to install the .dll files, I'm unable to put them in the Windows folder, as it tells me that the files are read-only or something. Same problem if I try to rename or delete them, there is no way I can put the two .dll in the Windows folder.

I install then the Certs.cab, and finally I soft-reset the damn PPC. On the Windows Mobile loading screen, it invites me to boot in safe mode, I do nothing in order to boot in nomal mode. Then I try to browse on my 8 GB SDHC card : it's not detected. New soft reset, new safe mode thing : my card is detected, but only as a 3.6 GB card, which is better than nothing, but not as good as if it was detected as a 8 GB card.

So, does anyone have a solution ? It's kind of obvious that the problem comes from the fact that I can't replace the .dll files.

You need to use a program such as Total Comander (more advanced version of File Explorer) this will let you change the dll files :)

[bidou]

I tried with TC : even with this one the files can't be replaced or deleted.

[manlybeach007]

yep and now trying to fix it.

I have the same problem : driver works fine, can read SDHC cards, but no more wifi. Any existing workaround or planned fix? I'm so close to it, very frustrating... Please help! :(

[bartliesveld]

- I 've tried different versions of WM6, but all give the same result in not being able to read my SDHC card. Even installing WM6.1 doesn’t make a difference.
- When I follow the steps of dirlan2001 it goes wrong at step 2: installation of SDHC.cab returning: “installation of SDHC.cab was unsuccessful”. When I use a CF or SD card it returns “HTC SDHC”cannot be installed. To try installing again to a different location…etc.” witch doesn’t make any difference.
- Does anyone has an idea what goes wrong?:confused:

Bart.
--------------------------------
Bart Liesveld, Maastricht Holland.
HP IPAQ hx4700 WM6.1 (pdav61kbd.nbf)
CF: Sandisk Extreme III 2.0 GB
SD: Sandisk 1.0GB
SDHC: Sandisk Ultra II 4.0 (not recognised, nor FAT16 or FAT32)

[cwl1086]

thanks for your description
:):):)

[digitanium85]

Works on my LG KS20. Here's what I did

ran sdhc.cab, overwrote sdbus and sdmemory in the /windows folder (eject ur card first, or it will say the file is in use), and finally installed the certs.

Thanks for sharing !!

[bartliesveld]

Thanks for your reply.

I’am afraid that I haven’t a sdbus and sdmemory file in my windows folder (only sdpready). Without sd / cf card and after reset it still retuns installation of SDHC.cab was unsuccessful.

[ken0121]

Bought 8GB yesterday and it works on my KS20!

Thanks!!!

[johnnylavah]

this patch works perfect on the htc excalibur with endless reboot....although i no longer have wifi... :-(

any wifi fix out there?

UPDATE: i uninstalled the sdhc cab and wifi is working again....and NO reboot issue!!!

[johnnylavah]

this patch works perfect on the htc excalibur with endless reboot....although i no longer have wifi... :-(

any wifi fix out there?

UPDATE: i uninstalled the sdhc cab and wifi is working again....and NO reboot issue!!!

[SonikVoom]

Hello, I have a XV6600 (CDMA version of HTC Blue Angel) running wm2003se and would like to modify the SDHC.cab file to add this capability to the sd slot. I would also like to modify flashvideobundle_v1.4.2.cab to update the youtube fix to work on wm2003se, the 1.4.4 version only works on wm5 or later.

I've searched around for a bit and don't really know how to access the code and the different modules inside a cab file. I have a wm5 SDK disk and was wondering if that would allow me to modify the cab files. Can anyone be kind enough to point me in the right direction as to how to access the codes? I have some programming experience and would like to update my device. Thanks!

[phdelia]

well the sdbus.dll & sdmemory.dll cannot be overwriten or renamed or deleted in my siemens t830. i used resco wm explorer & activesync explorer. also the sdhc.cam didn't work i used a newer version and simply run the certs.cab . will it work ? it recognises the sdhc transcend 4 gb but it hangs sometimes and you have to close and open the device again and it works. any solutions?

[SonikVoom]

well the sdbus.dll & sdmemory.dll cannot be overwriten or renamed or deleted in my siemens t830. i used resco wm explorer & activesync explorer. also the sdhc.cam didn't work i used a newer version and simply run the certs.cab . will it work ? it recognises the sdhc transcend 4 gb but it hangs sometimes and you have to close and open the device again and it works. any solutions?

Hi phdelia,

You're running WM5 if your device is stock. I saw this link for some people that got 8GB SDHC on the HTC Universal running WM5 http://forum.xda-developers.com/showthread.php?t=376771

From what I read it works fine in WM6 in the HTC Universal. Don't know if it will work on your T830 or the Blue Angel simply because of the hardware.

I'll have to ask them for advice on the tools they use to cook up something for WM2003SE. There isn't any way to update my XV6600 to WM5 or WM6 since all of the ROMs out there are for GSM phones.

[sebdigital]

I have a LG KS20 and I updated the rom to 10f version, and now the memory card (sandisk 4gb) is unstable, it sometimes disappear from explorator then is back. Any solution?

[jwy2k2]

And so continues the ongoing saga of the hx4700 SDHC card drama. (cue organ music)

Just a shot in the dark but, have you tried changing the name of the SD card to "Storage Card" and/or tried a cab called "Signed_Storage_Settings_App.cab" available on this thread:
http://forum.xda-developers.com/showthread.php?t=360549
Actually, that cab will change your card name to "Storage Card" automatically. I don't have an SDHC card so I DO NOT KNOW IF THIS WORKS. It's a bit of a catch22. I don't want to buy a card unless I know it will work, but I can't test if one works unless I buy a card.

It occured to me while installing this that most of the devices available now that these patches are written for have only one card slot, unlike the hx4700 with two. So, could it be so maddeningly simple that it's just a matter of putting the card name right in the registry??!!?? :eek:
Naaaahhhhhhhh, wishfull thinking, that's all, but, but, but, maybe, just maybe, fingers crossed. (cue theme music, fade to sunset)

Rufus

- I 've tried different versions of WM6, but all give the same result in not being able to read my SDHC card. Even installing WM6.1 doesn’t make a difference.
- When I follow the steps of dirlan2001 it goes wrong at step 2: installation of SDHC.cab returning: “installation of SDHC.cab was unsuccessful”. When I use a CF or SD card it returns “HTC SDHC”cannot be installed. To try installing again to a different location…etc.” witch doesn’t make any difference.
- Does anyone has an idea what goes wrong?:confused:

Bart.
--------------------------------
Bart Liesveld, Maastricht Holland.
HP IPAQ hx4700 WM6.1 (pdav61kbd.nbf)
CF: Sandisk Extreme III 2.0 GB
SD: Sandisk 1.0GB
SDHC: Sandisk Ultra II 4.0 (not recognised, nor FAT16 or FAT32)

[Destroid Monster]

Thank you guys. This SDHC driver works just fine with my Asus P735. No problems at all so far.

WM6
Sandisk 8GB microSDHC

What I did....
1) First install the SDHC.cab file into the main memory
2) DO NOT Soft Reset when prompt to do so
3) Copy the two(2) dll to \windows directory in the Asus P735
4) Do a Soft Reset
5) Install certs.cab

[Frisk1025]

Does the HP4700 can use it???
if it can... everything is wonderful!!

[jwy2k2]

I'd appreciate it if somebody would try an sdhc card out on the hx4700 using the sdhc driver posted here:

http://forum.xda-developers.com/showthread.php?t=360549

I don't know if it works. I repeat, I DO NOT KNOW IF IT WORKS. Please don't get your hopes up.

The driver at that link will change your card name to "Storage Card" I don't have an sdhc card so I don't have any way to test it.

Thanks.

[ykk2004]

thank you very much

[sunny127]

Anyone tested it on XDA II ( WM5/6 ) ?

[Andreas083]

Works on LG ks20!

Had to copy the dll's with Total commander though. Windows copy didn't work(even if it asked if I wanted to write over).

Cheers +++!

[kosmodisk]

is there anyone who make SDHC card work on HP ipaq rw6815 wm6 or O2 Atom wm6?

[23alex79]

HI, can someone please explain for a stranger/foreigner what to do EXACTLY!?

My Problem is, I can't put these files (cab's / dll) on my SDHC card and install at the phone. (Because my phone didn't "see" the 8GB SDHC!
So I have first to insert the files to my 2SD card and after istall remove the 2SD card and insert the 8GB SDHC card!???

I repead, what I wrote:
1) First install the SDHC.cab file into the main memory
(So from the "old" 2GB SD card!? - Because I had to get the cab onto the mobile device / ActiveSync doesn't work!)
QUESTION: Does this mean: the Device!???
2nd Question: ALL THREE files!?
SDHC_Artemis_back2original
SDHC-Artemis
WM5torage_178BETA2

2) DO NOT Soft Reset when prompt to do so

ok!
For step 3 - is there still my "old" 2Gb SD card inside the phone!?
3) Copy the two(2) dll to \windows directory in the Asus P735

these are the:
sdbus.dll and sdmemory.dll

To where have i to copy these!???? How did I come to the "place", where I have to copy it in!???

4) Do a Soft Reset

Is this the part, where I put the stick into the little whole!???
If so, at that time is there still the "old" 2GB SD card inside!???

5) Install certs.cab

Ok, after I have done this - what to do!?

Art what time do I have to put the SDHC card into the mobile device!?
I have problems, because I don't know exactly when to change the cards - and I tried so many things in the last few days...temporarily none of both card where working (not 2GB SD and 8GB SDHC) So I restarted the mobile device again, without card and delete the programs!

I know, a lot of "stupid" questions, but I am not really into this whole thing. I just bought a 8GB card and want it to run at my mobile device!!!

Hope someone can help me.
Greetings from germany!!!

[23alex79]

really, noone!??