SDHC for Artemis WM6 CAB

[gguyaz]

As many posts already speak about that. Here are the .cab that work (P3300, ARTEMIS, with WM6)
MOST IMPORTANT is to format your actual SD card and future SDHC card with fat32 ! (backup data before)
DONT NEED TO FORMAT IF YOUR CARD IS ALREADY FORMATED WITH THIS FILE FORMAT.
You can then use any fat32 card you want after SDHC upgrade.
WM5torage 1.78b is working fine but slow for me after SDHC upgrade. Tell us if it run for you too.

Artemis running WM5 could be flashed too, with Certification .cab (.xml inside). I will post a link as soon as possible.

ANSWER!! Yes WM5torage is very slow, as it is not working as usual. Don't know if the creator of this program gonna upgrade it for SDHC use. This software is not so important for the use of your SDHC Card, that was just to say that it could work (very slow) with new SDHC drivers.

[WARNING] There was some problems after this install. Tell me if you got problems using this .cab --> SDHC_Artemis_back2original.cab are the original OMAP850.dll, SDBus.dll, SDMemory.dll for Artemis, so you can load it at any time to go back to your original settings without SDHC support.

[WARNING] [COLOR="Red"] there is a problem if you plan to flash with SDHC card inserted on your device. With USB wire too. Remove your SDHC card before flashing or hard resetting your device.

[biou]

I m the first one to get it.

[cobalt78]

I've got it :D
Thanks
Now waiting for the 6Gb :cool:

[arblueboy]

As many posts already speak about that. Here are the .cab that work (P3300, ARTEMIS, with WM6)
MOST IMPORTANT is to format your actual SD card and future SDHC card with fat32 ! (backup data before)
You can then use both of them after SDHC upgrade.
WM5torage 1.78b is working fine for me after SDHC upgrade. Tell us if it run for you too.

Hi,
anything for WM5?

thanks

[lepsyfou]

Someone has tested? Please make a comment

quelqu'un l'a testé? merci de nous faire un commentaire

[rpb]

IT WORKS!!!!!!!!!!!!!!!!

Just bought the phone upgraded the ROM with original HTC WM6 ROM. Used the file as above. Pluged in my Micro SD and it works!!!!!!!

I had phoned HTC support for help as I bough the 6GB SDHC card when i bought the phone but couldnt get it to work, but was then told it doesnt support SDHC!

BUT IT DOES NOW!!!!

[zandadoum]

finally 4GB working on my P3300 WM6 (original HTC rom)


hoooooowever, the transfer through wm5torage is veeeeeeeeeeeeeeery slow!

sais 2h. for 1GB thats way off normal. wasn't that slow with my 2GB card (didn't try the 2GB card with new driver tho)



anyways, when i got everything on my new 4GB card, i am gonna do some benchmarks, try the card from the phone itself... and if it's just the USB transfer that is hella slow... i can take that.


btw, when i saw wm5torage 178beta so slow i tried 175. it works, but same slow speed

[rpb]

Thats a slow speed indeed. I have been copying files to fill my 6gb card since 6.45 just after my last post above. Its is now 7.40 and i have copied 1.7 GB.

Thats 1.7 gb an hour. Not a fantastic speed.

Im connected to a USB 2.0 port on my PC using Active Sync 4.5, connected directly to my P3300 (no cradle).

I didnt run all the files above though. All i ran was the first file SDHC_Artemic.cab

I didnt run the WM5torage file. Should i have?

Regardless it is working fine so far with out.

[zandadoum]

I didnt run the WM5torage file. Should i have?


if you're used to transfer via active sync, you're perfectly fine.

wm5torage is just a program to convert your phone+sd card into some sort of "usb memory stick" so you can access your phones sd card on every computer without drivers.

[lepsyfou]

gguyaz (http://forum.xda-developers.com/member.php?u=255228)

merci encore pour ce cab... ca reglera l'un des plus gros soucis de l'artemis

[richiev4]

As many posts already speak about that. Here are the .cab that work (P3300, ARTEMIS, with WM6)
MOST IMPORTANT is to format your actual SD card and future SDHC card with fat32 ! (backup data before)
You can then use both of them after SDHC upgrade.
WM5torage 1.78b is working fine for me after SDHC upgrade. Tell us if it run for you too.

This great thanks for the file.

One question - If my current SD card is already fat32 do I need to reformat it and then install the patch or can I just install the patch and upgrade the SD card to an SDHC card later?

Thanks

Rich

[m@rco]

I can't download the first can file?
I get redirected to the login screen.
But i'm already login

[zandadoum]

ok, USB transfer was slow, but worked. gonna see next days how syncing goes.

so, this worked great... except on my p3300 the GPS stopped working. u think there is something in this cab patch that could have affected that somehow?

[manonroof]

Someone has tested? Please make a comment

quelqu'un l'a testé? merci de nous faire un commentaire


It works!

Test passed.

http://bbs.pdafans.com/viewthread.php?tid=460614&extra=page%3D1%26amp%3Bfilter%3Dtype%26amp%3Btypei d%3D176&page=1

http://att.pdafans.com/day_071117/20071117_e0d034916f9e17289ea4y8HSLqIuBsKe.jpg

[kamal_chauhan]

First of all, Hi. I am new to this fourm and found it very helpful. Anyway, I can confirm that this works for my "O2 XDA Orbit" with 6GB card (FAT32 formatting), it has windows mobile 6 and the ROM version is "3.4.206.2 WWE". I have checked my GPS and Wireless adapter, they both seem to be working fine aswell.

Just to mention the WM5Storage, even before the patch, it was very slow for moving information in and out of the PDA. So I think that it needs an update for WM6 although I haven't yet tried the version that is attached in the very first post becuase alot of people are complaining about it so I didn't even bother, I just used the card reader that came with my card.

Thanks gguyaz for your excellent work.

My Window mobile 6 is official one from o2 itself. Hope it helps

[mugglesquop]

Any news of a cab for WM5?


Cheers,

[gguyaz]

Any news of a cab for WM5?


Cheers,

Hi! did you run a PDA with WM5?
If yes, could you tell us if there are OMAP850_SDHC.dll, sdbus.dll and sdmemory.dll on your \windows directory.

[kamal_chauhan]

Any news of a cab for WM5?

Cheers,

Hi, why don't you install the official WM6 provided by your PDA supplier (It's free).

Regards

[mugglesquop]

Hi, why don't you install the official WM6 provided by your PDA supplier (It's free).

Regards

1. If you look at my sinature, u'll see i'm with T-Mobile, they suck so much that they didnt release a upgrade for the MDACIII :mad:

2. i cant connect my MDA to a PC caus i blew up the USB board (computer doesnt see it when you plug it in) :rolleyes:

finally, gguyaz, yes i have all of those files.

[Longhair]

Hi! did you run a PDA with WM5?
If yes, could you tell us if there are OMAP850_SDHC.dll, sdbus.dll and sdmemory.dll on your \windows directory.

I have the HTC P3300 w/ WM5.

I just checked and only seen OMAP850_SDHC.dll.

[abutuzov]

Hello!
Is this - http://www.kingston.com/flash/sdhc_micro.asp , work on HTC P3300 with Artemis Touch 3.01 WM6 WWE ROM, 5.2.1921 SDHC ???
Only this type of flash in my shop.:-((
Sorry for my english.

[mugglesquop]

Hello!
Is this - http://www.kingston.com/flash/sdhc_micro.asp , work on HTC P3300 with Artemis Touch 3.01 WM6 WWE ROM, 5.2.1921 SDHC ???
Only this type of flash in my shop.:-((
Sorry for my english.

Yes it will work :)

[Lemontea]

hey i got a question if a 4 and 6 gig card works will these work to 8GB SDHC (Secure Digital High-Capacity) class 6

:rolleyes: :rolleyes: hehe would be verry nice but what about that fat32 is it on that or do i need to install the zip fille on my htc P3300

[mnn123]

As many posts already speak about that. Here are the .cab that work (P3300, ARTEMIS, with WM6)
MOST IMPORTANT is to format your actual SD card and future SDHC card with fat32 ! (backup data before)
DONT NEED TO FORMAT IF YOUR CARD IS ALREADY FORMATED WITH THIS FILE FORMAT.
You can then use any fat32 card you want after SDHC upgrade.
WM5torage 1.78b is working fine but slow for me after SDHC upgrade. Tell us if it run for you too.

ANSWER!! Yes WM5torage is very slow, as it is not working as usual. Don't know if the creator of this program gonna upgrade it for SDHC use. This software is not so important for the use of your SDHC Card, that was just to say that it could work (very slow) with new SDHC drivers.

SDHC_Artemis_back2original.cab are the original OMAP850.dll, SDBus.dll, SDMemory.dll for Artemis, so you can load it at any time to go back to your original settings without SDHC support.

Does this also work for htc p3300 Premium??
And how do I do to get the patch funktion. where to put it and so on?
Please tell me
Regards Mogens

[ady_uaic]

sorry for my question, but for what is SDHC ? :o

[Czech]

Secure Digital High Capacity - new type of type of flash memory card, with minimum capacity 4GB and maximum (ate least for now) 8GB.

[ady_uaic]

thank you for answering.

[gguyaz]

Does this also work for htc p3300 Premium??
And how do I do to get the patch funktion. where to put it and so on?
Please tell me
Regards Mogens

Ok! Yes it gonna work for your HTC, patch are the .cab on first the post. You have to copy it on your folder My Documents for exemple and execute it from there. But read carefully what I wrote on my first post.

[tailslides]

As a newbie I was really struggling until I used this CAB, wow, my Orbit has 6GB now, fantastic!

Thank you for the answers we need

Peter

[MikeStanley]

As many posts already speak about that. Here are the .cab that work (P3300, ARTEMIS, with WM6)
MOST IMPORTANT is to format your actual SD card and future SDHC card with fat32 ! (backup data before)
DONT NEED TO FORMAT IF YOUR CARD IS ALREADY FORMATED WITH THIS FILE FORMAT.
You can then use any fat32 card you want after SDHC upgrade.
WM5torage 1.78b is working fine but slow for me after SDHC upgrade. Tell us if it run for you too.

ANSWER!! Yes WM5torage is very slow, as it is not working as usual. Don't know if the creator of this program gonna upgrade it for SDHC use. This software is not so important for the use of your SDHC Card, that was just to say that it could work (very slow) with new SDHC drivers.

SDHC_Artemis_back2original.cab are the original OMAP850.dll, SDBus.dll, SDMemory.dll for Artemis, so you can load it at any time to go back to your original settings without SDHC support.



Beautiful - thanks
Now got all my maps and best music on the phone
Using 6G sandisk and is working great

[stead]

unfourtantly my pc's SD reader, and the usb reader built into my epson printer do not read SDHC cards, but my phone does now! .... luckily dodgy ebay memory card seller included SDHC compatable card reader tho..

seeing 3 gig free after using a 1gig memory card for so long is an amazing thing!

[walapulu]

je n' croyais pas beaucoup, mais j'ai essaye, chargement et execution du .cab, reset
mise en place d'une 4GB,
resultat : 3,8 Gb disponible
un seul mot
merci :D

[Ian Chambers]

Got my 8G micro SDHC today.
Already been to HTC's site to update to mobile 6.
Ran the cab.
Now got 8G memory
Tom Tom loaded, no problem.
Easy
Thanks

[skutcher]

Got my 8G micro SDHC today.
All works fine, also wm5torage isn't so slow (about 6minutes for 500mb).
My XDA run with the original WM6 from the O2 Page.
The empty card had about 7.6GB free memory.
TomTom, Bluetooth and wlan works fine.

[Luigi_Follina]

Got my 8G micro SDHC today.
Already been to HTC's site to update to mobile 6.
Ran the cab.
Now got 8G memory
Tom Tom loaded, no problem.
Easy
Thanks

Ehi guys ... where did you got the 8G micro SDHC, and how much did you pay it?

:p thanks!

[mugglesquop]

Ehi guys ... where did you got the 8G micro SDHC, and how much did you pay it?

:p thanks!

The cheapest place i have found for 8GB SDHC is eBay... around £50 for a SanDisk :)

or, http://www.thegadgetking.co.uk/ £50 for 8GB SanDisk with FREE delivery!

[Luigi_Follina]

The cheapest place i have found for 8GB SDHC is eBay... around £50 for a SanDisk :)

or, http://www.thegadgetking.co.uk/ £50 for 8GB SanDisk with FREE delivery!

Thanks Man!!!! :D

[nm8]

As many posts already speak about that. Here are the .cab that work (P3300, ARTEMIS, with WM6)
MOST IMPORTANT is to format your actual SD card and future SDHC card with fat32 ! (backup data before)
DONT NEED TO FORMAT IF YOUR CARD IS ALREADY FORMATED WITH THIS FILE FORMAT.
You can then use any fat32 card you want after SDHC upgrade.
WM5torage 1.78b is working fine but slow for me after SDHC upgrade. Tell us if it run for you too.

Artemis running WM5 could be flashed too, with Certification .cab (.xml inside). I will post a link as soon as possible.

ANSWER!! Yes WM5torage is very slow, as it is not working as usual. Don't know if the creator of this program gonna upgrade it for SDHC use. This software is not so important for the use of your SDHC Card, that was just to say that it could work (very slow) with new SDHC drivers.

[WARNING] There was some problems after this install. Tell me if you got problems using this .cab --> SDHC_Artemis_back2original.cab are the original OMAP850.dll, SDBus.dll, SDMemory.dll for Artemis, so you can load it at any time to go back to your original settings without SDHC support.

[WARNING] [COLOR="Red"] there is a problem if you plan to flash with SDHC card inserted on your device. With USB wire too. Remove your SDHC card before flashing or hard resetting your device.

Big thanks gguyaz!
it works for me...
http://forum.xda-developers.com/showthread.php?t=351958

[mugglesquop]

Has anyone managed to get SDHC to work on WM5? i've tried a couple of patches, but none have worked :confused:

Cheers,

[brco]

I have original WM6 upgrade from HTC, is this CAB needed for me? Or HTC WM6 oficial upgrade support SDHC default?

thanks

[gguyaz]

I have original WM6 upgrade from HTC, is this CAB needed for me? Or HTC WM6 oficial upgrade support SDHC default?

thanks

There were no SDHC support from HTC WM6 upgrade so you could install this .cab. But only if you need it, I mean if you use an SDHC micro-SD card.

[mugglesquop]

Has anyone managed to get SDHC to work on WM5? i've tried a couple of patches, but none have worked :confused:

Cheers,

anyone? :(

[needpbm]

Thankyou, now I can use my new Kingston SDHC 4gb without a full rom update.

[snowdog]

anyone? :(

Works on WM5, but is VERY slow.

[red_hanks]

Hi.

I have an O2 XDA IIs with WM6 CE OS 5.2.1620 build 18125.0.4.2.

I purchased a Sandisk 4gb SDHC micro SD card.

I tried to install the driver that you post here but it does not work and my XDA won't read my original Micro SD card 2gb.

I tried to uninstall the sdhc.cab and my XDA can read my 2gb micro sd card but still it wont read my SDHC 4gb card.

Sir, I hope you can help me with this so I can use my 4gb sdhc card.

Thank you in advanced.




RED_HANKS™

(O2 XDA IIs with WM6 CE OS 5.2.1620 build 18125.0.4.2.
A.K.A. HTC BLUEANGEL)

[greenleef]

Hi

I'm really interested in getting an 8gb card, not too bothered about wm5torage, even though it is a great tool. (why the hell didn't HTC put the card slot on the outer casing???!!?)

Has anyone done any bench testing? I want to know read/write speed in comparison to say, my Kingston 2gb. I'm running the stock WM6 ROM from o2 in my orbit.

If the speeds are similiar or the same for normal use then I'll be buying an 8gb :) :)

[noordwyk]

I have a Micro SDHC card (4Gb)that was reformatted to FAT16 to make it usable.
Now I try and use it on my Artemis after the SDHC patch.
The hassle is, I try to format it back to FAT32, but no-go. Tried thru WM5torage, tried FLASH.
I also tried SDformatter v2.0 on laptop....nada. manually deleted stuff off my ppc using Total Commander, it just appears back again.

My challenge is to get the MicroSD cleaned and reformatted to FAT32.

any good suggestions?

[mugglesquop]

Works on WM5, but is VERY slow.

could someone post instructions for WM5? i dont seem to be able to get it to work... :confused:

Cheers

[dragodr1]

8 gb sdhc works fine on my xda orbit
wifi and gps seems to be working too

Many Thanks!!!!

[anker1234]

It took about 4 min to install it MAX!
And it works fine with my 8 gb micro SDHC from sandisk

[gguyaz]

Hi.

I have an O2 XDA IIs with WM6 CE OS 5.2.1620 build 18125.0.4.2.

I purchased a Sandisk 4gb SDHC micro SD card.

I tried to install the driver that you post here but it does not work and my XDA won't read my original Micro SD card 2gb.

I tried to uninstall the sdhc.cab and my XDA can read my 2gb micro sd card but still it wont read my SDHC 4gb card.

Sir, I hope you can help me with this so I can use my 4gb sdhc card.

Thank you in advanced.




RED_HANKS™

(O2 XDA IIs with WM6 CE OS 5.2.1620 build 18125.0.4.2.
A.K.A. HTC BLUEANGEL)

I RED, did you format your new SDHC with fat32 as said on the first post ?
Because that normaly rocks with wm6 and P3300. Check again and tell us again.

[gguyaz]

I have a Micro SDHC card (4Gb)that was reformatted to FAT16 to make it usable.
Now I try and use it on my Artemis after the SDHC patch.
The hassle is, I try to format it back to FAT32, but no-go. Tried thru WM5torage, tried FLASH.
I also tried SDformatter v2.0 on laptop....nada. manually deleted stuff off my ppc using Total Commander, it just appears back again.

My challenge is to get the MicroSD cleaned and reformatted to FAT32.

any good suggestions?

The best way to format it is with adapter on you PC and right click then format, choose fat32 file system. Easy...

[Markostrom]

I have viewed so many posting (this and other sites) that say the patch does not work. Having had many unsuccessful attempts I can tell you it does work but... The device will NOT overwrite the DLLs in Windows automatically, you must rename sdbus & sdmemory first i.e. sdbusarc & sdmemoryarc etc. Don't even bother trying to remove the original or overwrite because it wont do it. You can check if its done it because the size of each file should be different. Once you have done that, run the prog again and you should have success! Thanks again to the creator. Why don't HTC build this in to an update? Good luck - Mark

[j.kolsteren]

It works super on the HTC P3300

J. Kolsteren

[Markostrom]

I have viewed so many posting (this and other sites) that say the patch does not work. Having had many unsuccessful attempts I can tell you it does work but... The device will NOT overwrite the DLLs in Windows automatically, you must rename sdbus & sdmemory first i.e. sdbusarc & sdmemoryarc etc. Don't even bother trying to remove the original or overwrite because it wont do it. You can check if its done it because the size of each file should be different. Once you have done that, run the prog again and you should have success! Thanks again to the creator. Why don't HTC build this in to an update? Good luck - Mark.. Update. I have just purchased an 8Gb micro sd to use in my HTC X7500 and thought I would try it in the Artemis/XDA Orbit and it works fine. Also no problems with sat nav and maps on the SDHC so far - Mark

[gguyaz]

The device will NOT overwrite the DLLs in Windows automatically, you must rename sdbus & sdmemory first i.e. sdbusarc & sdmemoryarc etc. Don't even bother trying to remove the original or overwrite because it wont do it. You can check if its done it because the size of each file should be different.

Hi! could you explain why it didn't overwrite it ? What are SDBUSARC and SDMEMORYARC ?

Thanks again to the creator. Why don't HTC build this in to an update?
Creator is M$ on the new WinCE 6.0 SDK, the things where just to use the new DLL as there were inside the pack.

[B3rry]

Very good, the last download works perfectly on my p3300 with a 4Gb sandisk (the first download didn't seem to work properly).
Good job

[ja.prvni]

Is it running on Artemis original WM5? I tryed all instruction from this post, but do not work. After inst SDHC-artemis.cab, i do not see my 2GB microSD, but 4GB SDHC i do not see too. I have in windows directory OMAP850_SDHC.dll, sdbus.dll and too sdmemory.dll but i can not rename this files in TotalCMD (with unhide files in ROM). In File explorer this files i do not see, but when i install SDHC-artemis.cab, size of this three files is changed and files i can rename, but still do not work. Anybody help me?

[greenleef]

Hi

Please could somebody give me an idea of data transfer rates, using the SDHC driver and WM5torage... ideally for copy mp3s (5mb per file) and avis (700mb per file.

I get the impression from others that it is the latency for seeking / writing a number of files, but large files are copied relatively quickly.

Thanx in advance

[Ahqar]

anyone? :(

I got an official upgrade to WM6 from the UK T-mobile site.

See here: http://forum.xda-developers.com/showpost.php?p=1850921&postcount=1

It works a treat but doesn't have too many extras.

[greenleef]

please please please can somebody give me some idea of read and write speeds using SDHC driver for Artermis. With speeds for WM5torage would be a bonus, but i do a fair amount of work on my storage card and agonising speeds would save me £50 for an 8gb and a lot of headache!!

thanks in advance :p

[InterPlanetary]

This working on P3350?

[danger89]

I would like to comfirm that the Sandisk 4GB Micro SD(HC) memorycard works on my HTC p3300 (Artemis) with this patch!
http://www.sandisk.com/Products/ProductInfo.aspx?ID=2369

Thans a lot!

@InterPlanetary
I can´t tell you, but I think it doesn´t work because this CAB file is specially written for HTC Artemis, that is the HTC p3300.
But p3350 looks like the p3300, and it has windows mobile 6?

@greenleef
3MB/s upload.

[zahndf]

hello after instaling the patch, my sdhc 8 gigs wasn't recognized, but the worst is that now even my old 1gig micro sd isn't recognized either... i tried to run the uninstaller but it does not work... can someone help me...

i have htcp3300 artemis, wm6, and tried to instal the patch to be able to use a 8gigs sdhc

thankx

fred

[nelsonnrc]

:confused:
Same here...

- I´ve Formated the card via windows (FAT32)
- Installed the cab(SDHC for artemis)
- Shut down the HTC P3300, removed the card and then reseted
- Inserted the card and reseted again
Nothing happened...

Phone: HTC P3301 with WM6 original ROM(october 2007)
CARD: Sandisk 8gb class 4

Can anyone help me out?

Thanks!

[krijger]

Try the new rom from meschle. All sdhc cards works with that rom.

[nelsonnrc]

DONE!
7,8gb

Thanks for the tip!
:D

[houdini1er]

Work great with P3300 & SHDC 8Go
The HTC support was saying P3300 doesnt support SHDC but with this patch it work perfect.
Big thank to you

[landwomble]

Try the new rom from meschle. All sdhc cards works with that rom.

..and installing this on top of meschle's rom will break your SD card access. if you're running artemis touch 3.01 to 4.01 then you don't need this.

[slk-A4]

Try the new rom from meschle. All sdhc cards works with that rom.

I run this great rom (cooked by Meschle) on my HTC P3300: Artemis Touch 4.01 WM6.1 WWE ROM, 5.2.19199 (Build 19199.1.0.0.

I can confirm that Meschle did build in SDHC support in this rom:
Quote from Meschle: "Bepe - many thanks for sdhc drivers, kitchen and all the tools and support!"

I did not need to install the .cab mentioned in the first thread (SDHC-Artemis.cab), I even think it should not be installed with this rom!

I just deleted the SDCONFIG.TXT file from my 2GB non-SDHC Card and immediately my device showed me the 8GB free space (7782.50 MB free space).

So my new Sandisk 8Gb SDHC runs perfectly with this rom.

WM5torage is quick enough to copy some smaller files.
I take the card out of the device, when I want to copy bigger files. Windows Vista recognizes SDHC in my builtin cardreader in my laptop, Windows XP does not.

[sajeelleo]

i have used SDHC CAB file by taping on it and installing, later i inserted 4gb card and it was working. amazing

[krijger]

I run this great rom (cooked by Meschle) on my HTC P3300: Artemis Touch 4.01 WM6.1 WWE ROM, 5.2.19199 (Build 19199.1.0.0.

I can confirm that Meschle did build in SDHC support in this rom:
Quote from Meschle: "Bepe - many thanks for sdhc drivers, kitchen and all the tools and support!"

I did not need to install the .cab mentioned in the first thread (SDHC-Artemis.cab), I even think it should not be installed with this rom!

I just deleted the SDCONFIG.TXT file from my 2GB non-SDHC Card and immediately my device showed me the 8GB free space (7782.50 MB free space).

So my new Sandisk 8Gb SDHC runs perfectly with this rom.

WM5torage is quick enough to copy some smaller files.
I take the card out of the device, when I want to copy bigger files. Windows Vista recognizes SDHC in my builtin cardreader in my laptop, Windows XP does not.


Problem solved:D

[Katsudo]

As many posts already speak about that. Here are the .cab that work (P3300, ARTEMIS, with WM6)
MOST IMPORTANT is to format your actual SD card and future SDHC card with fat32 ! (backup data before)
DONT NEED TO FORMAT IF YOUR CARD IS ALREADY FORMATED WITH THIS FILE FORMAT.
You can then use any fat32 card you want after SDHC upgrade.
WM5torage 1.78b is working fine but slow for me after SDHC upgrade. Tell us if it run for you too.

Artemis running WM5 could be flashed too, with Certification .cab (.xml inside). I will post a link as soon as possible.

ANSWER!! Yes WM5torage is very slow, as it is not working as usual. Don't know if the creator of this program gonna upgrade it for SDHC use. This software is not so important for the use of your SDHC Card, that was just to say that it could work (very slow) with new SDHC drivers.

[WARNING] There was some problems after this install. Tell me if you got problems using this .cab --> SDHC_Artemis_back2original.cab are the original OMAP850.dll, SDBus.dll, SDMemory.dll for Artemis, so you can load it at any time to go back to your original settings without SDHC support.

[WARNING] [COLOR="Red"] there is a problem if you plan to flash with SDHC card inserted on your device. With USB wire too. Remove your SDHC card before flashing or hard resetting your device.

Hello, I tried to follow alll you comment but I find some difficulties to do (may for my bad english). I have a P3300 with WM6, I formated my sd 8gb, but I don't full understand is what do i have to instal, do i have to instal all 3 files or jus one of them?

Many thanks for your help
katsudo

[gguyaz]

Hello, I tried to follow alll you comment but I find some difficulties to do (may for my bad english). I have a P3300 with WM6, I formated my sd 8gb, but I don't full understand is what do i have to instal, do i have to instal all 3 files or jus one of them?

Many thanks for your help
katsudo

Hi Katsudo!

You just need the first one .cab :)!

[pompeo]

thanks 4 the perfect job

[chelion]

It does work on my orbit... only not in windows media player. Storage card does not show up in the drop down list, only "My Device". Am I missing something ovbious? Since music is the only reason I got the 8GB card I would be gratefull for any help - loading each song one by one from file explorer isn't exactly ideal.

-edit-
Appears I was missing something ovbious, posted to soon - sorry. I had forgottern to "update libary". All my songs have now been found and it is working perfectly. Thanks.

And by the way I got my card here for £33: http://www.ebuyer.com/product/143777

[jrakkola]

8GB Sandisk SDHC card working perfectly on P3300 using official WM6 ROM

[fanto77]

8GB Sandisk SDHC card working perfectly on P3300 using official WM6 ROM:

1. remove your memory card
2. copy the attached SDHC-Artemis.cab file to your MDA
3. find the file using file explorer and click on it to install
4. put in your SDHC memory card (make sure it is FAT32 formatted)

[alvsky]

Hi,
I have a small problem...

First to introduce my device:
T-Mobile MDA Compact III with WM6 and "GB microSD card
ROM version: 3.14.119.1 WWE
ROM date: 9/19/07
ExtROM version: 3.14.119.104
WM6 Pro
CE OS 5.2.1620 (build 18125.0.4.2)

Ok.. Now.. I had problems (and still have) with installing iGO navigation SW (I got hardwareIDError) and I thought that this SDHC cab could solve the problem.
After I installed it nothing much happened. I still could not install iGO.
Then I wanted to go back and I installed SDHC_Artemis_back2original.cab.
Well, after that I could not see my microSD card anymore.

I reinstalled SDHC_Arthemis again and now I can see the card again, but I would like to go back to original again...

My question is it possible and can I copy files from another identical MDA and which files are that.

I hope you could understand my problem

Thanks

Alan

[gguyaz]

Hi,
I have a small problem...

First to introduce my device:
T-Mobile MDA Compact III with WM6 and "GB microSD card
ROM version: 3.14.119.1 WWE
ROM date: 9/19/07
ExtROM version: 3.14.119.104
WM6 Pro
CE OS 5.2.1620 (build 18125.0.4.2)

Ok.. Now.. I had problems (and still have) with installing iGO navigation SW (I got hardwareIDError) and I thought that this SDHC cab could solve the problem.
After I installed it nothing much happened. I still could not install iGO.
Then I wanted to go back and I installed SDHC_Artemis_back2original.cab.
Well, after that I could not see my microSD card anymore.

I reinstalled SDHC_Arthemis again and now I can see the card again, but I would like to go back to original again...

My question is it possible and can I copy files from another identical MDA and which files are that.

I hope you could understand my problem

Thanks

Alan

Problem is not SDHC drivers, the problem is with iGO8!

Yes you can copy them back to original driver with the cab on first post.

[alvsky]

Yes you can copy them back to original driver with the cab on first post.

I did that, but as I wrote in my previous post, my microSD was not recognized.

I repeat my question: "...can I copy files from another identical MDA and which files are that."

[michelgoulet]

As many posts already speak about that. Here are the .cab that work (P3300, ARTEMIS, with WM6)
MOST IMPORTANT is to format your actual SD card and future SDHC card with fat32 ! (backup data before)
DONT NEED TO FORMAT IF YOUR CARD IS ALREADY FORMATED WITH THIS FILE FORMAT.
You can then use any fat32 card you want after SDHC upgrade.
WM5torage 1.78b is working fine but slow for me after SDHC upgrade. Tell us if it run for you too.

Artemis running WM5 could be flashed too, with Certification .cab (.xml inside). I will post a link as soon as possible.

ANSWER!! Yes WM5torage is very slow, as it is not working as usual. Don't know if the creator of this program gonna upgrade it for SDHC use. This software is not so important for the use of your SDHC Card, that was just to say that it could work (very slow) with new SDHC drivers.

[WARNING] There was some problems after this install. Tell me if you got problems using this .cab --> SDHC_Artemis_back2original.cab are the original OMAP850.dll, SDBus.dll, SDMemory.dll for Artemis, so you can load it at any time to go back to your original settings without SDHC support.

[WARNING] [COLOR="Red"] there is a problem if you plan to flash with SDHC card inserted on your device. With USB wire too. Remove your SDHC card before flashing or hard resetting your device.

This is perfect on my HTC P3300. with 4gb card. Ordered a 8gb to see. Thank you very much. This solves the biggest problem of my phone

[skalarx]

Works perfect on SPV M650 with SanDisk 8GB microSDHC card on WM6.1. Total storage card memory 7771.30 MB !!!

[laguna33p]

Just a bit confused with all the posts....I have the orbit running WM6 so will a 4/6/8Gb work without downloading the cab file (SDHD-Artemis-cab)? If not, downloading this cab file opens up about 6 files like set-up, drivers, sdbus etc so do I transfer all these to the storage card or to which file on the orbit? Thanks

[qulu]

Just a bit confused with all the posts....I have the orbit running WM6 so will a 4/6/8Gb work without downloading the cab file (SDHD-Artemis-cab)? If not, downloading this cab file opens up about 6 files like set-up, drivers, sdbus etc so do I transfer all these to the storage card or to which file on the orbit? Thanks

It depends whether your ROM has this function built in or not.

If you are running the original ROM, then you cannot use a SDHC card. But if you are using self-cooked ROMs of, for example, Meschle or Tom_Codon etc.., then you don't have to install this cab file.

You can also make a test: Just insert a SDHC card in your PDA, open "file explorer" to find out if it "sees" the "storage card" or not.

[HEYWOOD]

I have just put an 8gb sdhc card in my orbit and it works perfectly. Got the card (sandisk) for £11.60 on ebay.
I'm running Meschle touch 4.02 full with cube.
I just copied everything on my old card onto a folder on my pc, then put the new card in my pc with a holder, and copied everything onto it. Put the new card into my orbit, started it, and it works fine - I can see 7780mb on the storage card.

I was expecting to need to faf about with it, deactivating copilot etc etc, but nothing happened - apart from loads of extra memory -brilliant.

As one of the previous posts said - it's using a rom that is sorted for sdhc.

[scaff]

Bepe rom with 8gb SDHC..... :)

[luigug]

I have installed this cab for sdhc drivers with a Sandisk 4 gb sdhc card, it seems work fine but after I have some problems.
I'm not sure that depend on it, but I had some reboots especially when connecting to the Internet.
I also tried the cab to go back, but the device worked no longer with sd card. I made a hard reset and all problems have disappeared.
Anyone had my problems, or all depends on a defective sdhc card?

ps: I have htc p3300 with rom official wm6
:confused:

[luigug]

Sorry, after many tests I understood that the reason of continuous reboot were not the drivers sdhc, but the battery is exhausted. I bought a new battery and I have reinstalled the drivers sdhc, and now everything is fine.

gguyaz, thank you very mach!

[xfree2010]

on my P3300 it works perfectly with a 8G.

a great Thanks to gguyaz

on htc hotline they say that p3300 works with SDHC without any patch.
I told them that with different brands of card it does not. The answer was: the cards are not goog try another one. well done HTC hotline.

[luigug]

on my P3300 it works perfectly with a 8G.

a great Thanks to gguyaz

on htc hotline they say that p3300 works with SDHC without any patch.
I told them that with different brands of card it does not. The answer was: the cards are not goog try another one. well done HTC hotline.

I confirm that the hotline HTC wrong! I have tried to use the card sdhc with the official ROM htc WM 6: without patch the device does not see the card.
;)

[mac_poms]

This cab worked a treat on my XDA Orbit. Now have a 4GB card in it to store Tom-Tom and a stack of tunes. Many thanks:)

[Jarek201]

hehe :-) wm6.1 rulez ;)

[arinjayw]

does this work on o2 xda.. i tried but no success.. got 4 gb

[Micux]

as there were many questions if sdhc patch will work with WM5 i can say that it doesnt :/ ive tried a moment ago but Artemis couldn't see the card (I was trying Kingston microSDHC 8GB Class 4)

(btw. does anyone have standard drivers for WM5 that were changed by the SDHC - Artemis.cab ?? cuz i forgot to copy them and now I cant use my old mircosd -_- thx in advance for any info)

[bobance]

As many posts already speak about that. Here are the .cab that work (P3300, ARTEMIS, with WM6)
MOST IMPORTANT is to format your actual SD card and future SDHC card with fat32 ! (backup data before)
DONT NEED TO FORMAT IF YOUR CARD IS ALREADY FORMATED WITH THIS FILE FORMAT.
You can then use any fat32 card you want after SDHC upgrade.
WM5torage 1.78b is working fine but slow for me after SDHC upgrade. Tell us if it run for you too.

Artemis running WM5 could be flashed too, with Certification .cab (.xml inside). I will post a link as soon as possible.

ANSWER!! Yes WM5torage is very slow, as it is not working as usual. Don't know if the creator of this program gonna upgrade it for SDHC use. This software is not so important for the use of your SDHC Card, that was just to say that it could work (very slow) with new SDHC drivers.

[WARNING] There was some problems after this install. Tell me if you got problems using this .cab --> SDHC_Artemis_back2original.cab are the original OMAP850.dll, SDBus.dll, SDMemory.dll for Artemis, so you can load it at any time to go back to your original settings without SDHC support.

[WARNING] [COLOR="Red"] there is a problem if you plan to flash with SDHC card inserted on your device. With USB wire too. Remove your SDHC card before flashing or hard resetting your device.


Works on my Artemis with SDHC micro 8GB !
GREAT GUYS!!!
Greetings
Bob

[bobance]

SDHC Micro 8GB was accepted by Artemis.

WM5torage is unacceptedly slow (2GB transferring since 5h and not yet finished).

Greetings
Bob

[nederbear]

IT WORKS!!!!!!!!!!!!!!!!

Just bought the phone upgraded the ROM with original HTC WM6 ROM. Used the file as above. Pluged in my Micro SD and it works!!!!!!!

I had phoned HTC support for help as I bough the 6GB SDHC card when i bought the phone but couldnt get it to work, but was then told it doesnt support SDHC!

BUT IT DOES NOW!!!!
I downloaded the 3 files as above to my computer Can you tell me how and in what way I can copy these files to my P3300 so that ik works. Thanks, Ed

[bbbbtran]

Hi all,

First sorry if this question has already been posted but I really need to make sure this 'patch'
http://forum.xda-developers.com/attachment.php?attachmentid=58394&d=1195209755
is going to work w/ my WM6 ???

Here is info on my system :

ROM : 3.13.406.1 FRE
Date : 8/28/07
Radio : 02.94.90
Protocole : 4.1.13.44
Ext ROM : 3.13.406.102

Big thx in advance for any help

[mr2boy]

this is amazing, works on my artemis with 4g, can anyone confirm the 16gb?

thanks !

[Sailorbart]

I am waiting before install the SDHC-Artemis.cab ;-))

[Ibn MuSa]

Tried last night, it works fine with 4GB SDHC on my O2 Orbit. Thanks mate! Anybody tried with anything larger like 16GB?

Thanks again

[Ibn MuSa]

Hi all,

First sorry if this question has already been posted but I really need to make sure this 'patch'
http://forum.xda-developers.com/attachment.php?attachmentid=58394&d=1195209755
is going to work w/ my WM6 ???

Here is info on my system :

ROM : 3.13.406.1 FRE
Date : 8/28/07
Radio : 02.94.90
Protocole : 4.1.13.44
Ext ROM : 3.13.406.102

Big thx in advance for any help

It should work because my system is older than yours and it works. Cheers

[peterksr]

hello,

y have a problem with this immage if y connect my phone with bluetooth connect with my car that works fine but after y disconect my phone is set on headphone connection and stay's there.
can somone thell my hou i can reset that so that y have the normal phone function agian ?

greetings peter

[az_click]

Thank you very much

[dozyd87]

I just bought a brand new phone (xda graphite) with WM6 and I have a 4gb micro SDHC card.
Is there anything I need to do on my phone before using the cab file?
thanks

[palituner]

MOST IMPORTANT is to format your actual SD card and future SDHC card with fat32 ! (backup data before)

but this was information for SDHC for HTC Artemis in first post (http://forum.xda-developers.com/showthread.php?t=345038) this thread

[babar_almighty]

Thank u thank u!!!

U made my day!

No, my weekend!!

What the.. my year!!!

Thanks again! :D

[Johnnyadda]

Having read through all the posts on this subject I have no idea where to install these files. The file names referred to don't show up in windoze explorer.
The readme is not detailed enough to determine the useage of the files.
Please post instructions that explicitly list file locations and the files to use and insert.


Trimble Juno WM5

[Johnnyadda]

http://t32gps.co.nz/viewtopic.php?t=50

[vijay4web]

IT works!! many thanks to ppl who made it. I tried even with 8GB it Works

[webpeter9000]

Original WM6, HTC P3300....

Thank for the patch - was about to go insane :)

[Roel964]

As many posts already speak about that. Here are the .cab that work (P3300, ARTEMIS, with WM6)
MOST IMPORTANT is to format your actual SD card and future SDHC card with fat32 ! (backup data before)
DONT NEED TO FORMAT IF YOUR CARD IS ALREADY FORMATED WITH THIS FILE FORMAT.
You can then use any fat32 card you want after SDHC upgrade.
WM5torage 1.78b is working fine but slow for me after SDHC upgrade. Tell us if it run for you too.

Artemis running WM5 could be flashed too, with Certification .cab (.xml inside). I will post a link as soon as possible.

ANSWER!! Yes WM5torage is very slow, as it is not working as usual. Don't know if the creator of this program gonna upgrade it for SDHC use. This software is not so important for the use of your SDHC Card, that was just to say that it could work (very slow) with new SDHC drivers.

[WARNING] There was some problems after this install. Tell me if you got problems using this .cab --> SDHC_Artemis_back2original.cab are the original OMAP850.dll, SDBus.dll, SDMemory.dll for Artemis, so you can load it at any time to go back to your original settings without SDHC support.

[WARNING] [COLOR="Red"] there is a problem if you plan to flash with SDHC card inserted on your device. With USB wire too. Remove your SDHC card before flashing or hard resetting your device.

At first I had my HTC P3300 WM5 upgraded with original Dutch WM6 upgrade (see http://www.4shared.com/dir/10864080/68747a9d/HTC_P3300.html).
Then I followed the above instructions.
Now I am :) :) :)

[73maveryk]

Hi!!!
I'm Italian and i have HTC P3300 ARTE100 cpu OMAP850 201MHZ with wm6 professional operating system CE 5.2.1620(built 18125.0.4.2). ROM 3.13.408.1 ITA Date of rom 8/28/07 Radio version 02.94.90 version proto 4.1.13.44 version EXTR 3.13.408.102. I have installed one Verbatim micro sdhc 8gb class 4 and work.I'm very happy. I insert the microsd 8gb verbatim on sd adapter and the sd adapter on my pc. I verified that the microsd 8gb was formatted in fat32.(ok fat32 by factory).From my pc i copy the file sdhc-Artemis.cab on the main memory of my htc p3300(attention don't copy the cab on micro sd memory card).I turn off my htc p3300 and i insert the new 8gb class 4 verbatim micro sd.I turn on htc p3300 and with start-file explore- i search on the main memory of my htc p3300 the sdhc-Artemis.cab. I touch the file for install. i accept the condition and i install the file on the main memory of htc p3300.Automatic start the installing file and when finish, on the screen you can see :for finish you must restart the htc p3300.Touch on ok button.your htc p3300 automatic restart.When the restart processing finisch, you can see that htc recognize 8gb micro sd-
On my pc i use linux ubuntu 8.04 and for see te micro sd of my htc p3300 i use card export (is a share program that must installing on htc p3300 .about 15 € but it's good because all pc, mac, linux ,windows see your micro sd of htc how is an external usb memory).Card export work fine also the new micro sdhc 8gb. Excuse me for my not very well English.Now you can see the sdhc driver on your main memory.

[perlsol]

I am probably one of the last people to upgrade my old orbit but here is some info for those still having problems getting the SDHC cards to work in xda orbit.
I downloaded the 2 SDHC files above, bought a 4Gb from morrisons for just 5quid :D
I installed the driver (without the memory card in the phone), I put the mem card in my PC and it was already formatted as a FAT32, so I didn't format it, put it in my phone and it didn't even show up... one thing I noticed in the format dialog box was the FILE ALLOCATION SIZE was set to 32bytes, I changed this to DEFAULT ALLOCATION SIZE and formatted it... now it works :D:D:D

so if anyone is having problems, try that.

Regards.

Perl Solutions.

[73maveryk]

Today i used my htc p3300 with micro sdhc 8gb.All application work fine.I tested active sync for copy file from pc to micro sdhc and from micro sdhc to pc .The copy of files Work fine and with a good speed.I test a program that work with gps and write the recording traks on memory micro sd.Work and write traks on micro sdhc.At today I don't have any problem.Thank you very much for the file sdhc-artemis.cab.I hope that my experience of use must help many people.Best regards.73maveryk

[ventoo71]

work as a treat on xda orbit wm6 with 4gb kingston micro sdhc,thank you :)

[Nickolaas67]

Someone has tested? Please make a comment

quelqu'un l'a testé? merci de nous faire un commentaire
Hi, and may I say Sir - Like your work and have downloaded some of your skins to try.

Yes, this SDHC upgrade works, success on first attempt.

Will try to do more improvements on my Artemis, notably WM6.1 or 6.5.

I'm really happy. Will also do an HTC Hero, and Diamond for some friends. Will study and search to find the right "medicine" for those models.

regards

[rakamat]

What is the maximum size of the SHDC card that can be fitted to the Artemis. Currently I am using Kingston 8GB.

Regards
Rajeev

[krati1]

What is the maximum size of the SHDC card that can be fitted to the Artemis. Currently I am using Kingston 8GB.

Regards
Rajeev

I use a 16GB SanDisk card and it works fine.
Thanks for the patch.

[JL20099]

I installed the cab 3 months ago in my P3300 (original ROM) and all worked perfectly. a few days ago the wifi connection has stopped working. the display indicates that the wlan is disabled. I have read in a forum that is due to the sdhc cab, but the only solution they give is uninstall, which means I can not use SDHC. Do you know any alternatives?

[Luciole_50]

[QUOTE=gguyaz;1669391] Thank you very much. I've tried it and it work fine. Greatings.

[tide1500]

Did the upgrade to wm6 and the sdhc cab two weeks ago and works fine.
However now I find my battery depleted after less than 10 hours or so giving the battery a very hard life and reducing the usability to nil. I switched off phone wifi, gps and everything but the battery still rapidly discharges.
Also set the wifi settings to battery optimised.

Any ideas on that one?

cheers

[tide1500]

All quiet on the western front, hmm?

[MaskedMarauder]

Did the upgrade to wm6 and the sdhc cab two weeks ago and works fine.
However now I find my battery depleted after less than 10 hours or so giving the battery a very hard life and reducing the usability to nil. I switched off phone wifi, gps and everything but the battery still rapidly discharges.
Also set the wifi settings to battery optimised.

Any ideas on that one?

cheers

Yes, the likelyhood is your battery is dying. My O2 Orbit was fine then had rapid battery discharge. A new battery resolved the issue.

[tide1500]

Yes, the likelyhood is your battery is dying. My O2 Orbit was fine then had rapid battery discharge. A new battery resolved the issue.

Okay thanks, that's certainly a possibility. Just a bit strange that this would happen after a major change/upgrade without being related, isn't it?
I installed some apps to load from the card and no doubts this uses energy. OTOH that's not different to my use of the XDA before moving ti SDHC.

[orsome]

Just to comment on this further. I have owned My XDA orbit for many years and have wanted to bring the software up to date. Much to my surprise, I now have the use of an SDHC card 8gig in size. Wooopie!

So much more can now be done with my fantastic phone.

[FabioBMW]

I own a HTC Arte100 with WM5 I tried the patch ,formatted the card but coul not acces the SD card ( microSD HC Verbatim 4 GB)

Please help meeeeeee !!! Thanks boys

[derupper]

You are my Hero ;)

XDA Orbit 4GB MicroSDHC hama works fine.