Bluetooth problem with WM6 ROMs for ATOM

[yanivw]

Hi Guys,
I have encountered the following problem.
When I first add my Supertooth II (car kit) to the ATOM (normal Hands Free handshake), everything goes well and I can get and make phonecalls.
However, after stopping the bluetooth on the ATOM and restart it after a while there is no communication between the devices any more and I have to add the Supertooth again to work.
I did not have the problem with the previous cooked WM5 ROMs.
Any Ideas?
Thanks,
Yaniv

[Coarls]

yeah I got this problem too...actually I can turn on the BT but the phone (device) will not be found if searched by other devices. Even with the ver 7a WM6...:confused:

[Mr.Nik]

So A2dp does not work on assembling of Wm6 for Exec Aku0.7a.0, authors so can not correct this bag already during 2-5 months, explaining that for them a garniture absents with A2DP,AVRCP, very it is sorry...:confused:

[hooliganboy214]

Yeah , me too . When i conect my Atom Exec ( Aku 0.7a.0) with Bluetooth Handset , i can't hear any thing ..........:(

[chartreux]

Yeah , me too . When i conect my Atom Exec ( Aku 0.7a.0) with Bluetooth Handset , i can't hear any thing ..........:(

since all of you have bluetooth device, can one of you test this application. this is MSI BluePlayer, try to play the music from this application and let me know the result.

[petesfer]

i didnt have this issue. i use a a2dp head set for listening to music. .. the only issue iv had is when ur speaking to some one over bluetooth and another calls comes in . the voice goes blank till transfer the call back to phone and then again back to bluetooth . but i thought that was a ITECH bluetooth head set issue so didnt bother talking about it. had this issue even during wm5

[dmkbox]

MSI Player is unholy bullshit crap. We need native BT stereo in any player/

[Mr.Nik]

since all of you have bluetooth device, can one of you test this application. this is MSI BluePlayer, try to play the music from this application and let me know the result.

Does not work!!! :(

[_fm]

Actually, i dont have any bluetooth device, would you please someone try this,.


http://forum.xda-developers.com/showthread.php?t=332692&page=14

post #670

Report the result okay,. :D

[Mr.Nik]

Actually, i dont have any bluetooth device, would you please someone try this,.


http://forum.xda-developers.com/showthread.php?t=332692&page=14

post #670

Report the result okay,. :D

/HKLM/Drivers/BuiltIn/BtA2dpSnd
remove any Priority256 value
HKLM/Drivers/BuiltIn/WaveDev,
Priority256=149
/HKLM/Software/Microsoft/Bluetooth/AudioGateway
Capability=37
/HKLM/Software/Microsoft/Bluetooth/A2DP/Settings
UseJointStereo=0
BitPool=58
MaxSupportedBitPool=80
Remove all other values from this key including SampleRate

Does not work!!!

[jiggs]

yeah I got this problem too...actually I can turn on the BT but the phone (device) will not be found if searched by other devices. Even with the ver 7a WM6...:confused:

you did not check the option for bluetooth settings -> make this device visible to other devices.

I have been using bluetooth to activesync with pc and interchange with other pda phone, but the atom can easily be found :confused:

[Ultimate Chicken]

i didnt have this issue. i use a a2dp head set for listening to music. .. the only issue iv had is when ur speaking to some one over bluetooth and another calls comes in . the voice goes blank till transfer the call back to phone and then again back to bluetooth . but i thought that was a ITECH bluetooth head set issue so didnt bother talking about it. had this issue even during wm5

This is an MS Bluetooth Stack issue and cannot be rectified because Microsoft can't be bothered. It's a problem even with other phones, which is why people have tried to replace bluetooth stacks with ones from Widcomm and co (unfortunately for us, this isn't possible, and I believe that Jiggs has tried this before).

Microsoft doesn't garuntee full compatiblity with all headsets using its lame bluetooth stack. On my end, the A2DP works, the mic works, the "return to A2DP mode" works, I can resync when cut off, but I can't hear s*** when engaged in a voice call.

Jigg's ROM is still on the WM5 Bluetooth stack. The WM6 Bluetooth stack, which I've also tested, is supposedly better for voice calls but IIRC is NOT compatible with MANY headsets (A2DP won't work on most headsets that aren't marked BT2.0) - just ask the Athena users. It isn't compatible with mine - produces NO output in A2DP... I was the one who advised Jiggs to stick to the WM5 bluetooth stack. >_>

Headset: SonicGear Blue2 SR300

[jiggs]

This is an MS Bluetooth Stack issue and cannot be rectified because Microsoft can't be bothered. It's a problem even with other phones, which is why people have tried to replace bluetooth stacks with ones from Widcomm and co (unfortunately for us, this isn't possible, and I believe that Jiggs has tried this before).

Microsoft doesn't garuntee full compatiblity with all headsets using its lame bluetooth stack. On my end, the A2DP works, the mic works, the "return to A2DP mode" works, I can resync when cut off, but I can't hear s*** when engaged in a voice call.

Jigg's ROM is still on the WM5 Bluetooth stack. The WM6 Bluetooth stack, which I've also tested, is supposedly better for voice calls but IIRC is NOT compatible with MANY headsets (A2DP won't work on most headsets that aren't marked BT2.0) - just ask the Athena users. It isn't compatible with mine - produces NO output in A2DP... I was the one who advised Jiggs to stick to the WM5 bluetooth stack. >_>

Headset: SonicGear Blue2 SR300

thanks for clearing that out Ulti. I was wondering if you could try one more time with wm6 ms bluetooth stack? In the headset profile, I have tried to integrate a new set of bluetooth audio gateway. Unfortunately, this requires flashing a new ROM as the modules need to stay modules to work.

It is open to everyone with a bluetooth headset to try... I don't have a device to test it. sorry.

http://www.mediafire.com/?0uqg0utmpkx

[yanivw]

Jiggs,
what can be the reason for after first handshake everything is going well, but after restarting it the devices do not communicate (for inbound & outbound phone calls) ?
Moreover, if you use the same WM5 bluetooth stack, how come I did not have that problem with the WM5 ROM ?
Thanks,
Yaniv

[jiggs]

Jiggs,
what can be the reason for after first handshake everything is going well, but after restarting it the devices do not communicate (for inbound & outbound phone calls) ?
Moreover, if you use the same WM5 bluetooth stack, how come I did not have that problem with the WM5 ROM ?
Thanks,
Yaniv

Yaniv,

for first question- sorry, I don't know. I think second question is obvious - wm5 drivers is meant for wm5 system and not wm6.

Have you tried the the WM6 A2DP with WM6 audio gateway driver?

[yanivw]

Yaniv,

for first question- sorry, I don't know. I think second question is obvious - wm5 drivers is meant for wm5 system and not wm6.

Have you tried the the WM6 A2DP with WM6 audio gateway driver?

I did not.
How do I get and install it ?
Yaniv

[jiggs]

I did not.
How do I get and install it ?
Yaniv

Post#13 above

[Ultimate Chicken]

It is open to everyone with a bluetooth headset to try... I don't have a device to test it. sorry.

http://www.mediafire.com/?0uqg0utmpkx

Thanks, Jiggs, but the A2DP's still NG to my headset with this test ROM. Replacing the keyboard with the black one I liked back during O2 Mini BigStorage is a nice touch, tho.

Anyone else with a BT Stereo Headset, especially a 2.0 standard one, go ahead and help test. You may have better luck than me (the SR200 is just BT1.2 standard, and I'm now pushing SonicGear for a firmware update).

[dmkbox]

Sorry, I have Pulsar 590E and its 1.2 Bluetooth.

[hooliganboy214]

since all of you have bluetooth device, can one of you test this application. this is MSI BluePlayer, try to play the music from this application and let me know the result.

Yeah , I just try it , and it works verywell . But my Bluetooth Handset isn't MSI 's device , so i only run it in 31s . Do u have other method ???????

[yanivw]

Post#13 above

Jiggs,
The link in #13 is not working.
Can you send it again ?
Reagrds,
Yaniv

[jiggs]

Jiggs,
The link in #13 is not working.
Can you send it again ?
Reagrds,
Yaniv

the site was under maintenance for 12hours. please try again. it's working now.

[Mr.Nik]

thanks for clearing that out Ulti. I was wondering if you could try one more time with wm6 ms bluetooth stack? In the headset profile, I have tried to integrate a new set of bluetooth audio gateway. Unfortunately, this requires flashing a new ROM as the modules need to stay modules to work.

It is open to everyone with a bluetooth headset to try... I don't have a device to test it. sorry.

http://www.mediafire.com/?0uqg0utmpkx

This the test assembling for Atom or Exec???

[Ultimate Chicken]

It's an Atom ROM, NOT Exec.

[yanivw]

the site was under maintenance for 12hours. please try again. it's working now.

Jiggs,
I am not so familiar with the prcoess.
I guess I run the ROM file and after file extractions before continuing I just replace the *.nb0 file?
Yaniv

[jiggs]

Jiggs,
I am not so familiar with the prcoess.
I guess I run the ROM file and after file extractions before continuing I just replace the *.nb0 file?
Yaniv

that is right. don't get your hopes too high. Ultimate has reported that it didn't work on his device.

[yanivw]

that is right. don't get your hopes too high. Ultimate has reported that it didn't work on his device.

Well,
It dod not work for me :-(
Thanks anyway...
Is there a chance to solve the BT issue?

[zyberlee]

A2DP Bluetooth Problem is still ...

Just to report that both ITECH R35, and O2 XA-06 can't work with any
"ATOM EXEC" rom yet.

:)

[petesfer]

This is very interesting information if u guyz are still working on this issue. Well i just got my hands on a xda zinc , it uses the broadcom bluetooth drivers. Now i tried the whole picking up a call on the zinc. It has 2 distinct drivers 1 for the Head set for voice calls and for a2dp . Now when the headset is activated to pick up a call , i saw an option within the headset drivers that allowed to steam music via mono or disable it completely . Now i wonder if there is an option avalible on the ms BT stack that disables mono music streaming completely . If this is done i think it should fix the problem . Cause the stack switches properly between a2dp and headset the only problem is when on a call it still tried to steam audio which is why the headset goes blank . Even when receiving an sms if i keep sound notification on the sound will go blank while on a call on the atom . It isnt so on the o2 zinc as the sound comes out of the speakers directly while on a call.

Now hope this helps.. I was wondering?? has any one tried the Broadcom bt stack ?? on the atom ?? if yes How far did they reach and what was the issue??