help me plz i am stuck in os screen after try to update from schapes 3.3 to 4.0 [Archive]

View Full Version : help me plz i am stuck in os screen after try to update from schapes 3.3 to 4.0

halder

18th November 2007, 01:44 PM

EQUiLiiBRiUM

18th November 2007, 01:50 PM

IT Would help if you Gave the Error Message # for Example If your Getting Error Message 240 It's a Connection Problem.

Try Turning of your Firewall, Have the Rom you are upgrading to in your Root Directory And Always Make sure your Phone is Super CID unlocked.

Hope This Helps.....I"ve been where you were at once... IT was the My Firewall for me.

Wam7

18th November 2007, 04:38 PM

Try flashing your Operator rom using the SD card method. Or looking at the Unbrick table done by POF. It's all in the WIKI...

kazuni

18th November 2007, 05:37 PM

hi plz every one who can help me it very urgent..
i try to upgrade my friend htc hermis but i am stuck in os menu
previusly i install scap rom 3.3
i treid to install the new version it reached 2% and the an error massege appear (connection error) then i tried to do it again but evry time i try the same maasege appear on the phone (coonection error )
it reach 0% and this message appear
i have spl 1.09
i also tried to hard spl it but still the same message ...
i treid different usb and pc but still
i download an official rom the same message
i sleep a see the same f*cking message
plz help me

Try booting in debug mode (hold the Side OK button + power button and reset at the same time)

once you booted into that 4 colored screen with SPL/IPL listed, flash the device with HardSPL 0.7

Link Here (ftp://xda:xda@ftp.xda-developers.com//Uploads/Hermes/Hard_SPL_Olipro/HardSPL_V7.rar)

Then upgrade your device again.

using HardSPL it ensures your device will not be overwritten with bad blocks and it enables unsigned rom files to be written to the phone. it's a win-win if you upgrade it.

halder

19th November 2007, 10:28 AM

still the same message 262 update error.
i triecthe hard spl but s6s error always appear
i can go to boot screen
plz if there solution tell me..
its not afirewall fault..

EQUiLiiBRiUM

19th November 2007, 03:20 PM

still the same message 262 update error.
i triecthe hard spl but s6s error always appear
i can go to boot screen
plz if there solution tell me..
its not afirewall fault..

This 262 Error Message I got this

""ERROR [262] : UPDATE ERROR

This error occurs during the CE ROM code upgrade process.

Solution: If this happens, you can just soft-reset the device and run RUU again. The update process will then continue.

Note: At this stage, the Wince is destroyed; instead, it is in upgrade mode.""

At this Point I"m Stumpped I"m hoping one of the Big Boys Will Step in on this one and give you a better Solution....

halder

20th November 2007, 12:30 AM

yes it reached 2% then it stuck there i treid to reupgrade with the same rom no luck..i tried different rom also ..
do u think if i download a shiped htc rom it will work

ach2

20th November 2007, 02:36 PM

yes it reached 2% then it stuck there i treid to reupgrade with the same rom no luck..i tried different rom also ..
do u think if i download a shiped htc rom it will work

Wam7 has already given the best advice to start unbricking your phone.

1. Get the original Rom which came with your phone. It might be listed here http://wiki.xda-developers.com/index.php?pagename=Hermes_Upgrades or here http://wiki.xda-developers.com/index.php?pagename=Available%20Original%20Shipped% 20WM6%20ROM%20Versions. If it is not listed you'll need to search the internet and/or this forum.

2. When you have your original ROM, flash it to your phone from the SD card, not from your computer. Instructions to do this are here http://wiki.xda-developers.com/index.php?pagename=Hermes_SDCardFlashing. Remember to have a full battery charge before beginning.

Hopefully this will recover your phone. If it does, then make sure that you flash Olipro's HardSPL 2.10 (V7) to your phone http://forum.xda-developers.com/showthread.php?t=296722.

If you get stuck on how to do this correctly, there is some good advice in Mrvanx's upgrade guide http://forum.xda-developers.com/showthread.php?t=299462.

Also, in the future it can help others to help you if you give more information about your phone such as phone type, original ROM, current Rom, Radio version, SPL version etc, etc. Most people include some of this info in their signature so they don't have to keep re-typing it.

halder

27th November 2007, 07:42 PM

thank you very much for replaying...
i tried the sd card method and i download my exact cid rom but still it give the error 0068002 i download more than 5 original shiped rom same message
my phone is htc ...tytn ..not qtek or dopod ....
htc pure
info
r 1.18.00.10
g 32.55.7018.01h
d 3.57
m05 s04 b06
any other solution
i can go to boot menu

halder

30th November 2007, 09:12 PM

i tried evry possible way to flash my phone but i cannt get it done why??? EROOR 262
i download more than 10 official rom (htc) and i apply the exact sd method steps still it give me 0028002 error
my device is HTC ...BUT HTC WHAT I DONT KNOW...IT JUST HTC ONLY
SO I CANNOT CHOOS MY EXACT CID ROM
PLZ HELP ME OR I WILL THROUGH IT AWAY

halder

3rd December 2007, 12:03 AM

plz answer me its very urgent?????

halder

4th December 2007, 01:17 AM

ok i dont want to open a new thread with same question.so if some one plz can help i will be graetful....
i want to knew how to fix error 262

MrCeddy

4th December 2007, 01:28 AM

Have you tired flashing from the bootloader?
Have you tired flashing just the rom from mitty ?

wacky.banana

4th December 2007, 01:59 AM

Is the phone unlocked? Have you thoroughly read the unbricking thread in the wiki?

WB

halder

4th December 2007, 11:12 PM

i dont know if its unlocked but i flash it with chap 3.7 a then i tried to flash it with chap 4.00 it reach 2% and stoped..ofcouse its unlocked..
it tried the mitty way but it give
level=ff instead of 0
and bad command
it tried the sd card method the error 0068002 or invalid vender id

ilogik

5th December 2007, 03:01 AM

If you get invalid vendor error doesn't that mean the phone is locked?

halder

16th December 2007, 08:15 PM

since no one helped me here in this thread ...i helped my self..
i found the solution...i send my ID to htc.com and they replay nicey and send me the link to my exact cid rom ..
the problem was my original rom was norway not wwe ..shit who thought that???
anyhow thank you for all who tried to help me..really i benfit from thier method for future desaster???
see u in another problem...
cuz we know nothing we just ask and ask until we find the solution ..:eek: :eek: :D