Herm100 No GSM Help!!!!!!

[C Brown]

I purchased a used Herm100. I powered it on guess what its stuck in boot loader. Thats not a issue I flashed it with the Schaps wm6 4.01. Rom upgrade was successful. Awesome right?? Except when it power cycled I said no GSM. I never seen this on my wiza200 or 100 soo I didn't know. I put my sim card in and nothing. I've looked and all the forums are talking about switching out the board. I refuse to believe that thats the fix.

If anyone can help that would be great!!

[KarhU]

Take a look here (http://wiki.xda-developers.com/index.php?pagename=Hermes_Unbrick) and here (http://forum.xda-developers.com/showthread.php?t=286755). Hopefully you can unbrick your Hermes.

[C Brown]

Do you know where I can find a NBH containing only OS and a radio in nbh format?? Its funny I have successfully bricked and unbricked this thing about a hundred times. Its everything I try. This morning I had schaps on it ok but no radio. The problem keeps cycling. So any help with be great!!!

[KarhU]

Can you provide more info about your Hermes? Like IPL/SPL and concrete error - i.e. booted to the OS but no GSM... And so on. If you want to flash a custom ROM containing radio ROM then Mattkr Pandora Halo3 ROM has both OS and RADIO. Link is in my signature in the benchmarks thread.

[C Brown]

Ok I have a Herm200

IPL- 1.04
SPL-2.10.0lipro

I cant flash even a base rom to it. Its basically a type 2 brick and I havent worked with this model enough to know all the tricks.

I've tried HardSPLv7 and HardSPL. with no results. Tried numerous radios with little or no results.

[C Brown]

I was able to successfully flash

black satin
Build: 17944.0.3.1
Kernel: 5.2.1437
Pagepool: 4MB
Rom Base: 3.57

last night it runs really stable all apps work fine.
So Im going to leave it that way untill I can figure out a radio that will work
I get a constant failure at wither 12% or 82% and its either 260 or 262

[asfoor]

I was able to successfully flash

black satin
Build: 17944.0.3.1
Kernel: 5.2.1437
Pagepool: 4MB
Rom Base: 3.57

last night it runs really stable all apps work fine.
So Im going to leave it that way untill I can figure out a radio that will work
I get a constant failure at wither 12% or 82% and its either 260 or 262

What radio version do you have installed? I recommend highly flashing to the AT&T 3.62 new OEM rom first. you can find here on this forum. It has the built-in 154.07 radio. and thats what you most likely will need. Then you can re-flash easily to any cooked ROM of your choice. I recommend the VP3G... personal preference and from experience, it is the most stable.

[C Brown]

I have no radio thats why I'm getting the No GSM error I have pandora on it right now with no radio