is it bricked ?

[luxeomni]

i tried to do a beasty wm6 rom update, everything went well, and at the end of the procedure, it ask me to "press 0 to restaure factory setting" for rebooting, i press 0 and then....nothing. Impossible to start the htc, i can only access bootloader mode, but ain't no more recognize by the pc, i tried to plug it to AC power as i thought of a battery prob, and still nothing, no start, and no led telling me that it's recharging...
i ve done some search on the forum, but can't see something similar to this.
anyhelp welcome
regards

[micha2802]

Hi,
did you try to downgrade it to WM5? I also had problems with WM6 and after a downgrade to WM5 it worked again.

Cheers

Michael

[Tunndoc]

sorry wrong thread.

[luxeomni]

well now when i connect it to my pc it says unknown device, so i dunno how to reflash to wm5

im on vista 64, and when i try to install the 64 driver it gave me on error about a corrupted driver...

[jimpsar]

Hi
I have the same problem,cannot recognize the usb port.
Anyone has an idea??

[kurtslashmx]

try changing your cable and if possible try using a xp machine. i have heard of people having problems when flashing with vista (i did it and no problems)
If after you change the cable, and use a differente computer the universal when you put it in bootloader mode and the word SERIAL does not change to USB i would say its pretty much bricked :( but if you only flashed your device i would say it is still possible to bring it back from death.
try changing your cable (specially if its the one you usually use) im almost sure thats your problem.
also make sure you dont have the sd card or the sim in it that seems to help too.
best regards and best of luck
Erik

[PsiDOC]

im on vista 64,

Thats your problem! Vista is very shaky at best with flashing via USB on HTC devices.
Reflash to WM5 using the SDCard method.

Psi

[moh6299]

follow the directions on this thread it worked for me http://forum.xda-developers.com/showthread.php?t=291723