XDA Atom WM 6 and WM 6.1 ROM Cooking Tutorial

[-G-]

ATOM WM 6 AND WM 6.1 ROM COOKING TUTORIAL

nb: try it at your own risk,.


WHAT DO YOU NEED?
- Hypercore Kitchen (http://forum.xda-developers.com/showthread.php?t=310076)
- Garmin XDA ATOM ROM Cooking Sets (UPDATED 14/03/08) (http://rapidshare.com/files/99367619/Garmin_XDA_ATOM_Cooking_Sets__14032008_.rar.html)

ADD-ON
- WM 6.1 SYS files (http://rapidshare.com/files/88850555/HERMES_DEV_v2.1_Build_19199.rar)



Usage Of Hypercore Kitchen
- Creates OEM and anything related to OEM

Usage of ATOM WM6 Kitchen
- Dump your diskimage_ver.nb0
- Build your new diskimage_ver.nb0


Already have it all?? Alright, now lets start working,.

1. Extract "Garmin XDA ATOM Cooking Sets" to somewhere you like, (There will be an original OEM and SYS folder, don't erase those, it required for dumping process,.)
2. Put your diskimage_ver.nb0 into ROM folder, (overwrite the original file there,.)


3. Run "DumpFiles.cmd" , (Then you'll see a working progress, until it ask you to press any key) ---- press any key then,.
4. There will be a new window come named "Package Tool", then Open where the "dump" folder is located, (The package tool help you build your OEM and DSM,.)

http://i225.photobucket.com/albums/dd142/heaven_approach/Empat.png




5. Go to \Tools\Build Package, you will not see a working progress, when the content of the Package tool was changed, ITS DONE!!, and your diskimage_Ver.nb0 was dumped,.
(The original OEM and SYS folder will be gone,.)



--- Now go to "dump" folder and you'll see OEM and SYS folder ---


nb : If there are some files outside OEM / SYS folder, put it where it should by reading the last line of your package tool, after building a package,.

http://i225.photobucket.com/albums/dd142/heaven_approach/Lima.png
----------> means that these file should be in \SYS\NetCF folder,.



OKAY, take a rest first, have some experience with that OEM and SYS folder,.
You may change, add or remove some folder there, but BECAREFUL, some of them are SYSTEM file!!!



Satisfied experience with OEM and SYS folder?? Lets Continue,.

6. Now move your OEM and SYS folder (inside "dump" folder), to the first page (Where the original OEM and SYS is located)

http://i225.photobucket.com/albums/dd142/heaven_approach/Enam.png




7. Run "BuildOS.cmd" (You will see a new window "BulidOS",.) press the green button,.

http://i225.photobucket.com/albums/dd142/heaven_approach/Tujuh.png




8. When done, (you could see on the bottom left corner, written "Done"), close the BuildOS by pressing the [X] Button, (dont close the BuildOS.cmd)
9. You will see in the BuildOS.cmd, a progress, wait till it ask you to press any key,. ----- Press any key then,.
10. There you are, your new diskimage_Ver.nb0 is inside "FLASH" folder,.



Nb: For a tutorial about building an OEM, could be seen HERE (http://forum.xda-developers.com/showthread.php?t=345964), and How To Port XIP and SYS folder, could be seen HERE (http://forum.xda-developers.com/showthread.php?t=357249),.





nb: For WM 6.1 Cooking, you couldn't DUMP your ROM, because it removes all manifest to be one,.




GOOD LUCK,.

Happy ROM Cooking to all of you,.




- Kumara -

[udayrulz]

STICKY IT!!

[-G-]

STICKY IT!!


Thanks mate,. :D

[medkid]

the problem is where you get "your diskimage_ver.nb0" ?????? you will have to use an "already built" diskimage_ver.nb0 (like jiggs') and modify his rom, you can not create your own rom with another build like 5.2.1933 or else, I was trying to make a new rom from a new build but I wasn't successfull. Jiggs told me to read the wiki, but maybe I didn't do my homework so well. :(

[-G-]

the problem is where you get "your diskimage_ver.nb0" ?????? you will have to use an "already built" diskimage_ver.nb0 (like jiggs') and modify his rom, you can not create your own rom with another build like 5.2.1933 or else, I was trying to make a new rom from a new build but I wasn't successfull. Jiggs told me to read the wiki, but maybe I didn't do my homework so well. :(


It shouldn't be any problem mate,.

You could use any diskimage_ver.nb0 to dump,.

look at my new ROM (O2 Atom WM6 Premium), it was dumped from jiggs WM6 AKU 0.7a,.

Just use mine mate, (from O2 Atom WM6 Premium), its dumpable,. ;)

[udayrulz]

@Ckaidi
Exactly , although i have no way near the knowledge required to make 1 but ...i just did a quick background check on you and figured out that you hv been cooking for a while now....so yea i understand wat you lookin at..

[yetdy]

This is really different from what we used to cook for xda 2. How I wish cooking for an atom is as easy as cooking for an xda 2. :)

Anyway, good luck to all who would like to attempt cooking their own ROM. I'll just look at those available in here and copy those that I think will fit me best. :)

BTW, I hope somebody can teach me how to change the splash images. I would like to replace them with pictures of my family.

[udayrulz]

^welcomehead.96.png = splash image..
found in SYS folder..

[medkid]

It shouldn't be any problem mate,.

You could use any diskimage_ver.nb0 to dump,.

look at my new ROM (O2 Atom WM6 Premium), it was dumped from jiggs WM6 AKU 0.7a,.

Just use mine mate, (from O2 Atom WM6 Premium), its dumpable,. ;)

I know it,I know that your diskimage_ver.nb0 is dumpable (don't you see the rom I built pReDrT ?)
what I want to say is , you can not build your own diskimage_ver.nb0 based on a new build (for example 5.2.1933, the newest build), what you do is dumping a built diskimage_ver.nb0 from jiggs (the original one) which's build is 5.2.1908, don't you see that ???????
To build a new rom with a new build, it costs an arm and a leg, so much time spends on it. It's not easy as you said,but I really appreciate what you share here. :p

[serialzs]

bro,

where's the part of the dump do i go to add new appz or new files?
the guide is just like extracting and compressing thing but how we add something?
where's the folder structure of \windows , \program files , etc..?
please update the pics too..it's much easy to do it with visual guide..
guide us please..

thanks a lot..

-=[serialzs]=-

[udayrulz]

You have to add them in OEM folder mate...

[serialzs]

You have to add them in OEM folder mate...
and where do it go in our unit if we update???
can you be more detailed? is there a \windows and \programfiles folder in OEM folder?

thanks..

-=[serialzs]=-

[udayrulz]

and where do it go in our unit if we update???
can you be more detailed? is there a \windows and \programfiles folder in OEM folder?

thanks..

-=[serialzs]=-

Yes , the files go to windows directory automatically
First download Ervius Packages Creator..
..say you want to include TCPMP in your ROM , You first need to Unzip all the files that TCPMP installs to a folder ..now open Ervius Packages Creator..navigate to folder .add a shortcut (option in the packages software..)
and click create package..now copy the folder to the OEM folder and build ROM..

Hope you get the idea..:)

[serialzs]

yes i get the idea..what if i want to install it in program files folder? what should i do?
sorry for making ask again..i want to know it so that i can help you guys too..

thanks a lot..

-=[serialzs]=-

[udayrulz]

I dont know that ....sorry...

[udayrulz]

You can obviously create Custom Cabs and run put em in extended ROM for installing in program files..
You can search for OEM packages on the site.. u ll find plenty...

I am still learning so do pass on the knowledge..


Going a bit OT - Are you the one who made the DSU installed for ROM installation?? :)

[jiggs]

yes i get the idea..what if i want to install it in program files folder? what should i do?
sorry for making ask again..i want to know it so that i can help you guys too..

thanks a lot..

-=[serialzs]=-

you will specify it in initflashfiles.dat, but you will have a double copy. The purpose of putting it to ROM is to have all the applications you need and consume less persistent storage vis-a-vis installing the cabs after a hardreset. However, having too many files in \windows will cause your system to lag; so, this is the purpose of utilizing the extended ROM wherein the skin files (like wireless manager / htc home / mediaplus) can be placed in the extended ROM and the program files in \windows.

[-G-]

bro,

where's the part of the dump do i go to add new appz or new files?
the guide is just like extracting and compressing thing but how we add something?
where's the folder structure of \windows , \program files , etc..?
please update the pics too..it's much easy to do it with visual guide..
guide us please..

thanks a lot..

-=[serialzs]=-


To add a new appz, you have to make your appz (appz that you would like to have as a default appz) as an OEM,.

How do we make an OEM? i am working on it, i'll post it here soon,.

all the files there (inside SYS and OEM folder) will go to windows directory, then if you would like to move something to program files directory, you have to make an "initflashfiles.txt",. (usually for your OEM)

for example,
Directory("\Windows\StartUp"):-File("coldinit.lnk","\Windows\coldinit.lnk")

----- > it means that you copy file "coldinit.lnk" to \windows\startup folder,.


hope that help you,.

[-G-]

and where do it go in our unit if we update???
can you be more detailed? is there a \windows and \programfiles folder in OEM folder?

thanks..

-=[serialzs]=-


It wont go anywhere, as long as we dont make a "initflashfiles.txt" for our apps (that have been changed to OEM), the shorcut of the apps wont go anywhere, it still in windows folder, (so, it wont be displayed in the main menu)

[-G-]

I know it,I know that your diskimage_ver.nb0 is dumpable (don't you see the rom I built pReDrT ?)
what I want to say is , you can not build your own diskimage_ver.nb0 based on a new build (for example 5.2.1933, the newest build), what you do is dumping a built diskimage_ver.nb0 from jiggs (the original one) which's build is 5.2.1908, don't you see that ???????
To build a new rom with a new build, it costs an arm and a leg, so much time spends on it. It's not easy as you said,but I really appreciate what you share here. :p


Ow i see,. sorry missunderstanding,. :P

Yep, absolutely you could, i am working a new ROM with upgrade of XIP to 5.2.1933 at the moment, if it success, i'll update the thread,.

but it havent finished, so the thread just till extracting and repacking,.

Gud luck,. :D

[yetdy]

^welcomehead.96.png = splash image..
found in SYS folder..

Thanks! :) I appreciate it. :)

[ckaidi]

Hi guys,

Anyone know how to change the system info? Examples the OEM packages i cooked and the pagepool...

BTW can we change the pagepool during the cooking or using hexeditor is the only way?

THank!!

[udayrulz]

search for "version" text file in sys folder to change sys info..

[jiggs]

Hi guys,

Anyone know how to change the system info? Examples the OEM packages i cooked and the pagepool...

BTW can we change the pagepool during the cooking or using hexeditor is the only way?

THank!!

Change the pagepool of the ROM template on your kitchen, then you don't have to worry each time.

[nhomphing]

sorry, Where i can find Jiggs ATOM WM6 Kitchen?

thanks.

[-G-]

sorry, Where i can find Jiggs ATOM WM6 Kitchen?

thanks.


Actually, i lost the link of it, it means that i have to upload it again,.
for now, you could use abusalza ROM kitchen,.

[nhomphing]

Actually, i lost the link of it, it means that i have to upload it again,.
for now, you could use abusalza ROM kitchen,.

thanks. ^^
now, I got it.:D

[ckaidi]

Change the pagepool of the ROM template on your kitchen, then you don't have to worry each time.

Ok thank!! :)

BTW i tried 2mb pagepool....very laggy and slow haha

for 4mb speed ok.....but i had problem soft-reset the device, it required me to remove the batt before it react to my poking (soft-reset).

[tjlabais]

sorry, Where i can find Jiggs ATOM WM6 Kitchen?

thanks.

Jiggs never released a WM6 Kitchen in public.

[ckaidi]

Jiggs never released a WM6 Kitchen in public.

I'm loving it :)
THis is the best released Jiggs for us!!

ok just a newbie question abt cooking...i couldnt find the "version" txt to change the system info. Anyone can help me?

Jiggs will be a history already right? Well, guess you wanna have some peace so hope everyone can respect this :)

Recently read some news abt the 2nd edition of wm6, is more like a patch than a upgrade. So hope Jiggs can still assist us in this which will be release in the 1stQ of 2008 which is SOON. Yeah!! :)

[ckaidi]

One more question, anyone can teach me how to create the format to flash with memory card? While trying with new cooking, it took a long time just to check a thing with full flashing.

[medkid]

One more question, anyone can teach me how to create the format to flash with memory card? While trying with new cooking, it took a long time just to check a thing with full flashing.

hint: flashing ROM without bootloader and extended ROM: extract your downloaded rom to a folder,put eboot.nbO, nova_pda_033105.mot, ExtendedRom.img out of the "uprom tools" folder before you flash rom. When the flashing reach 100% there'll be an error occurs, this is normal. Just unplug the cable, then hard reset your device, you will have a new rom with your old bootloader, old extendedROM.
attention: before flashing using the method above, you have to put the device into bootloader mode (camera+reset).

[ckaidi]

@medkid
Thank bro!
BTW i tryin to create a OEM for netcf3.5....lets hope it work!! :p

[Nixeus]

Hello everybody !!

I'm a user of a MIO P550, which are two clones : The Airis T620 and the Yakumo DeltaX. These three pda are on wm5.

I compared the rom on my PDA with various ROMS, and i have noticed that the characteristics of my pda are the same ones as eten X.500.

I haved try to upgrade my pda with ETEN X.500 wm6 rom , but the pda does not start any more: S

I do not want to repair my pda, but I will like to know if you had ideas, to return this rom compatible with my pda

Great great thanks !!

Nixeus

[tjlabais]

Hello everybody !!

I'm a user of a MIO P550, which are two clones : The Airis T620 and the Yakumo DeltaX. These three pda are on wm5.

I compared the rom on my PDA with various ROMS, and i have noticed that the characteristics of my pda are the same ones as eten X.500.

I haved try to upgrade my pda with ETEN X.500 wm6 rom , but the pda does not start any more: S

I do not want to repair my pda, but I will like to know if you had ideas, to return this rom compatible with my pda

Great great thanks !!

Nixeus

the mio is a totally different device from the atom. unless, someone here has it as a second device. you're better off asking this question in the scoter community: http://www.miousers.co.uk/

[tjlabais]

One more question, anyone can teach me how to create the format to flash with memory card? While trying with new cooking, it took a long time just to check a thing with full flashing.

Hi kaidi,

I never got the chance to use this. Could you try this? it works for the atom exec. might work for atom. it has options which part to update. btw, the drop down box does not respond to the click of the mouse you just have to press arrow down for the options.

cheers,
:cool:

[Nixeus]

the mio is a totally different device from the atom. unless, someone here has it as a second device. you're better off asking this question in the scoter community: http://www.miousers.co.uk/


Thank for your answer !
But i don't understand, because the mio p550 has the same one processor, wifi, gps..... So why tell you that "mio is a totally different device " .

If there are the same processor and gps and wifi, it may be possible to adapt the rom ???

Please !! :(
I am programmor, so i want to adapt the eten x500 rom for my pda ! Please give me information !!! Please !! No mio user can help me, so you are my last hope !

Great thank, and sorry for my bad english !

[ckaidi]

Hi kaidi,

I never got the chance to use this. Could you try this? it works for the atom exec. might work for atom. it has options which part to update. btw, the drop down box does not respond to the click of the mouse you just have to press arrow down for the options.

cheers,
:cool:

Bro its not working for me...got error "cant create window/temp" :p

[yass]

Where do I find Jiggs ATOM WM6 Kitchen? Ive only found abusalza's but it doesnt corespond with this guide.

regards
yass

[aldiersa]

hi garmin, can you assist me to upgrade ROM O2 XDA Atom life ( LIMITED EDITION ) mine.. before my it have never done this matter, I hope you give the way is precise very to upgrade it..
thank...

[-G-]

hi garmin, can you assist me to upgrade ROM O2 XDA Atom life ( LIMITED EDITION ) mine.. before my it have never done this matter, I hope you give the way is precise very to upgrade it..
thank...

hi, i'm affraid i dont know,.

maybe i knew one, well experienced on it, try ask abusalza for it,. :p

[twinklesam123]

Hi garmin, may i ask where can i download your Atom wm6 Kitchen? i downloaded atom life kitchen..but seems not working...thanks:)

[joolawan]

How can I do?

[wiepie]

sama abdi oge dapetna kos kieu.. kumaha ieu garmin...maneh teh buat guide nu lebih jelas kunaon biar nubi kos abdi ngerti..
matur nuhun akang..

I get the same error.anyone have solution for this ??

How can I do?

[pdafre4k]

Very wonderful guide thx mr Garmin
but i need Some little Help Please
i try to extract your(garmin) wm6.1 rom
and many sys files are missing
can you post the files or direct me to where it comes
thanks you so much

[Missing Manifests]
d92a4f0a-378a-4482-8fd3-bd127a05e4de.dsm
723fb954-d931-4348-b672-82a188e587b5.dsm
1f23b941-38f8-def5-83a6-b0a8eadaa267.dsm

[Missing Files]
SYS\OEM_SIM_TKit
File: 1dc3da02-499f-4547-9fd2-78cddfda9c62.rgu

SYS\SMIME
File: 8cb4ac12-6bc5-4bda-ab45-539988c36a95.rgu

SYS\Bth_A2DP
File: 6b4ed31c-5ced-41b2-b917-2c006f046a5e.rgu

SYS\SqlCeMobile
File: 29356830-10de-437d-ad6a-6c7d60a7dea4.rgu

SYS\WelcomeCenter
File: 40723732-841f-40d3-8dd0-af7d0d6156de.rgu

SYS\MediaOS
File: ae879543-c73e-4888-812b-d8177c404612.rgu

SYS\RUNTIMES
File: e658c544-26bf-45ac-a458-2044a5d1e698.rgu

SYS\FWUPDATE
File: 23ba5346-78b8-4436-b7d2-f30712c3cef4.rgu

SYS\GPSID
File: d13b7447-0248-462a-bba4-d868f31642ed.rgu

SYS\WWAN
File: 77f38251-db87-4e5d-96d9-9e8e35b6dc1d.rgu

SYS\SMS_Providers
File: 582f7a58-3c50-4301-970a-ed5ec8947692.rgu

SYS\IPSECVPN
File: 429b237a-cc04-4166-a65b-5cd54a4f1b7d.rgu

SYS\SQM
File: 76bd787c-86b5-4b63-a1d8-1a910f86c8e1.rgu

SYS\BTDUN
File: d7904a7e-6226-443b-8c8c-439683b0b55a.rgu

SYS\BaseAppsFiles
File: b04e8c7f-f0f6-4201-83c6-4876404128c9.rgu

SYS\MediaOSFiles
File: da5e9e89-c2c4-4ff9-ae88-c90a50ec09c9.rgu

SYS\Bth_HID
File: a492bb92-210b-4933-9a65-272cc8ad9a5b.rgu

SYS\Enterprise
File: fd7ec796-412f-4352-9a71-04da841dc265.rgu

SYS\NetCF 3
File: 38f43c9f-bc38-430e-81d1-a2e6c650f225.rgu

SYS\Entertainment
File: 0cfc3dc0-5fbc-4153-9ce9-72df4d8c2922.rgu

SYS\OSFiles
File: b51fcecc-a738-463b-93a4-7b44d03c30b7.rgu

SYS\BROWSINGCORE
File: d81b11e0-3299-4b65-8305-78f1fa03dc07.rgu

SYS\Catalog
File: e4200be3-87fc-4415-9a57-d96456c4ba10.rgu

SYS\Redist
File: 208f8be6-1362-45b3-ae17-95d4ab426c11.rgu

SYS\MediaOS_dpi_96_resh_240_resv_320
File: cb274b02-a54d-4780-971e-b6c924548d95.rgu

SYS\Redist_Lang_0409
File: 12e09329-dd44-4d62-a5b7-25124bb2ef88.rgu

SYS\Bth_HID_Lang_0409
File: c9b03c4a-50ff-4e86-b92f-2eb3f9968eb3.rgu

SYS\WelcomeCenter_Lang_0409
File: 37ed0d5d-7978-4dcf-b3f9-2768426fb1bf.rgu

SYS\OS
File: d0b41563-b345-4444-aa15-986e7c7fff99.rgu

SYS\Bth_A2DP_Lang_0409
File: 9ca8818d-8eec-479d-a9be-81305c52d303.rgu

SYS\BROWSING
File: b183f2a7-06c3-4f27-9679-7baf97e94efa.rgu

SYS\SqlCeMobile_Lang_0409
File: 90f7cab5-db46-4341-b395-7aca3d47055c.rgu

SYS\Redist_DPI_96
File: a15620ee-f541-454c-99d4-ee268d67e74a.rgu

SYS\Browsing_Lang_0409
File: f65c1b88-2732-470a-88c8-de964e9f9ca7.rgu

SYS\Bluetooth
File: 25c125d4-0a18-487d-a709-9b4242bbf4c3.rgu

SYS\Shell
File: 1f1aca24-d942-464a-9281-10567741499c.rgu

SYS\BaseApps
File: f50e9a40-aed9-497a-bdea-84451210e960.rgu

SYS\Bluetooth_Lang_0409
File: ba94b89b-3bb8-4f41-bada-121dbdab1fde.rgu

SYS\Office
File: 331439cf-a636-4243-8424-e501be3a39d2.rgu

SYS\Base_Lang_0409_DPI_96
File: 15947029-6127-4062-bb7f-b3c8bed871ac.rgu

SYS\Base_Lang_0409
File: 813fd1d1-ca6f-4b6d-96d2-c97fb99bd535.rgu

SYS\Base_DPI_96
File: 52dcbada-7234-4ee7-b513-731176d5f860.rgu

SYS\PhoneRedist
File: d9d7d86d-3f83-4289-bd32-aa1972a1447e.rgu

SYS\INTERNETSHARING
File: ed0ab1a4-a456-4fb0-ad9d-93feccf351a3.rgu

SYS\Phone
File: 2a6583ff-6047-46cc-b9be-b7deca1152c3.rgu

SYS\Phone_Lang_0409
File: 25f4da29-9280-48e9-8f2e-28a91294ce74.rgu

SYS\PhoneRedist_Lang_0409
File: 70bf28e9-b87c-4b43-be51-e804d08276b1.rgu

SYS\OEM_Esmertec Java_v2
File: 121c4ed9-cc8e-4053-ba56-894e36bbde7f.rgu

SYS\OEM_HTC_TouchDual_HomePlug (Modified)
File: 1246ccc6-1788-11dc-8314-0800200c9a66.rgu

SYS\OEM_ArcSoft_MMS_4
File: 17ef41c2-4105-11dc-8314-0800200c9a66.rgu

OEM\OEM_Lang_0409
File: 1bc57b2f-c0f3-46c6-8c2a-257952317eac.rgu

OEM\OEMAPPS
File: 1ed9f068-892e-11dc-8314-0800200c9a66.rgu

OEM\OEM_Adobe_Reader_LE2
File: 206f6fbd-717b-4f7b-bd87-62ecd1db55af.rgu

OEM\OEM_TouchDual_Dialer
File: 252a8b7d-79dc-4216-97a9-c5b32ca8a9a8.rgu

OEM\OEM_BGT_Equalizer
File: 495692a4-8921-11dc-8314-0800200c9a66.rgu

SYS\OEM_HTC_ActionScreen
File: 49e88420-78af-11dc-8314-0800200c9a66.rgu

SYS\OEM_WM5torage
File: 5778649B-0FED-4494-8BD1-D4FBAD1CF9B2.rgu

SYS\OEMDrivers
File: 686cdab8-e39f-43e2-9efe-3bcfb2cf5460.rgu

OEM\OEM_SIM_Mgr
File: b03c6e69-e938-41d2-86a2-3b34c8d96aa9.rgu

OEM\OEMMISC
File: bca09377-81f0-4905-a8a8-897bdd01ab7f.rgu

SYS\OEM_HTC_AudioManager_v1
File: CA98E496-F2D1-48a1-845F-9564C294BDF8.rgu

SYS\OEM_Comm_Manager_Pro
File: E3EB2A64-FA84-4c22-82B7-1A6827168C22.rgu

SYS\OEM_VoiceSpeedDial
File: f9f4c477-0eba-4aaf-8ba8-e4111717c0af.rgu

OEM\OEM_Mortscript
File: fa0a6472-d8ae-4238-be28-b677b6638a27.rgu

SYS\OEM_WM6_Sound_Patch
File: fbc20bfd-b133-48fa-9ede-8de970b337e0.rgu

SYS\OEM_HTC_X_Button_v2
File: fdeabb2f-126a-4bc7-8524-ffcfdf7d4481.rgu

[-G-]

Very wonderful guide thx mr Garmin
but i need Some little Help Please
i try to extract your(garmin) wm6.1 rom
and many sys files are missing
can you post the files or direct me to where it comes
thanks you so much

[Missing Manifests]
d92a4f0a-378a-4482-8fd3-bd127a05e4de.dsm
723fb954-d931-4348-b672-82a188e587b5.dsm
1f23b941-38f8-def5-83a6-b0a8eadaa267.dsm

[Missing Files]
SYS\OEM_SIM_TKit
File: 1dc3da02-499f-4547-9fd2-78cddfda9c62.rgu

SYS\SMIME
File: 8cb4ac12-6bc5-4bda-ab45-539988c36a95.rgu

SYS\Bth_A2DP
File: 6b4ed31c-5ced-41b2-b917-2c006f046a5e.rgu

SYS\SqlCeMobile
File: 29356830-10de-437d-ad6a-6c7d60a7dea4.rgu

SYS\WelcomeCenter
File: 40723732-841f-40d3-8dd0-af7d0d6156de.rgu

SYS\MediaOS
File: ae879543-c73e-4888-812b-d8177c404612.rgu

SYS\RUNTIMES
File: e658c544-26bf-45ac-a458-2044a5d1e698.rgu

SYS\FWUPDATE
File: 23ba5346-78b8-4436-b7d2-f30712c3cef4.rgu

SYS\GPSID
File: d13b7447-0248-462a-bba4-d868f31642ed.rgu

SYS\WWAN
File: 77f38251-db87-4e5d-96d9-9e8e35b6dc1d.rgu

SYS\SMS_Providers
File: 582f7a58-3c50-4301-970a-ed5ec8947692.rgu

SYS\IPSECVPN
File: 429b237a-cc04-4166-a65b-5cd54a4f1b7d.rgu

SYS\SQM
File: 76bd787c-86b5-4b63-a1d8-1a910f86c8e1.rgu

SYS\BTDUN
File: d7904a7e-6226-443b-8c8c-439683b0b55a.rgu

SYS\BaseAppsFiles
File: b04e8c7f-f0f6-4201-83c6-4876404128c9.rgu

SYS\MediaOSFiles
File: da5e9e89-c2c4-4ff9-ae88-c90a50ec09c9.rgu

SYS\Bth_HID
File: a492bb92-210b-4933-9a65-272cc8ad9a5b.rgu

SYS\Enterprise
File: fd7ec796-412f-4352-9a71-04da841dc265.rgu

SYS\NetCF 3
File: 38f43c9f-bc38-430e-81d1-a2e6c650f225.rgu

SYS\Entertainment
File: 0cfc3dc0-5fbc-4153-9ce9-72df4d8c2922.rgu

SYS\OSFiles
File: b51fcecc-a738-463b-93a4-7b44d03c30b7.rgu

SYS\BROWSINGCORE
File: d81b11e0-3299-4b65-8305-78f1fa03dc07.rgu

SYS\Catalog
File: e4200be3-87fc-4415-9a57-d96456c4ba10.rgu

SYS\Redist
File: 208f8be6-1362-45b3-ae17-95d4ab426c11.rgu

SYS\MediaOS_dpi_96_resh_240_resv_320
File: cb274b02-a54d-4780-971e-b6c924548d95.rgu

SYS\Redist_Lang_0409
File: 12e09329-dd44-4d62-a5b7-25124bb2ef88.rgu

SYS\Bth_HID_Lang_0409
File: c9b03c4a-50ff-4e86-b92f-2eb3f9968eb3.rgu

SYS\WelcomeCenter_Lang_0409
File: 37ed0d5d-7978-4dcf-b3f9-2768426fb1bf.rgu

SYS\OS
File: d0b41563-b345-4444-aa15-986e7c7fff99.rgu

SYS\Bth_A2DP_Lang_0409
File: 9ca8818d-8eec-479d-a9be-81305c52d303.rgu

SYS\BROWSING
File: b183f2a7-06c3-4f27-9679-7baf97e94efa.rgu

SYS\SqlCeMobile_Lang_0409
File: 90f7cab5-db46-4341-b395-7aca3d47055c.rgu

SYS\Redist_DPI_96
File: a15620ee-f541-454c-99d4-ee268d67e74a.rgu

SYS\Browsing_Lang_0409
File: f65c1b88-2732-470a-88c8-de964e9f9ca7.rgu

SYS\Bluetooth
File: 25c125d4-0a18-487d-a709-9b4242bbf4c3.rgu

SYS\Shell
File: 1f1aca24-d942-464a-9281-10567741499c.rgu

SYS\BaseApps
File: f50e9a40-aed9-497a-bdea-84451210e960.rgu

SYS\Bluetooth_Lang_0409
File: ba94b89b-3bb8-4f41-bada-121dbdab1fde.rgu

SYS\Office
File: 331439cf-a636-4243-8424-e501be3a39d2.rgu

SYS\Base_Lang_0409_DPI_96
File: 15947029-6127-4062-bb7f-b3c8bed871ac.rgu

SYS\Base_Lang_0409
File: 813fd1d1-ca6f-4b6d-96d2-c97fb99bd535.rgu

SYS\Base_DPI_96
File: 52dcbada-7234-4ee7-b513-731176d5f860.rgu

SYS\PhoneRedist
File: d9d7d86d-3f83-4289-bd32-aa1972a1447e.rgu

SYS\INTERNETSHARING
File: ed0ab1a4-a456-4fb0-ad9d-93feccf351a3.rgu

SYS\Phone
File: 2a6583ff-6047-46cc-b9be-b7deca1152c3.rgu

SYS\Phone_Lang_0409
File: 25f4da29-9280-48e9-8f2e-28a91294ce74.rgu

SYS\PhoneRedist_Lang_0409
File: 70bf28e9-b87c-4b43-be51-e804d08276b1.rgu

SYS\OEM_Esmertec Java_v2
File: 121c4ed9-cc8e-4053-ba56-894e36bbde7f.rgu

SYS\OEM_HTC_TouchDual_HomePlug (Modified)
File: 1246ccc6-1788-11dc-8314-0800200c9a66.rgu

SYS\OEM_ArcSoft_MMS_4
File: 17ef41c2-4105-11dc-8314-0800200c9a66.rgu

OEM\OEM_Lang_0409
File: 1bc57b2f-c0f3-46c6-8c2a-257952317eac.rgu

OEM\OEMAPPS
File: 1ed9f068-892e-11dc-8314-0800200c9a66.rgu

OEM\OEM_Adobe_Reader_LE2
File: 206f6fbd-717b-4f7b-bd87-62ecd1db55af.rgu

OEM\OEM_TouchDual_Dialer
File: 252a8b7d-79dc-4216-97a9-c5b32ca8a9a8.rgu

OEM\OEM_BGT_Equalizer
File: 495692a4-8921-11dc-8314-0800200c9a66.rgu

SYS\OEM_HTC_ActionScreen
File: 49e88420-78af-11dc-8314-0800200c9a66.rgu

SYS\OEM_WM5torage
File: 5778649B-0FED-4494-8BD1-D4FBAD1CF9B2.rgu

SYS\OEMDrivers
File: 686cdab8-e39f-43e2-9efe-3bcfb2cf5460.rgu

OEM\OEM_SIM_Mgr
File: b03c6e69-e938-41d2-86a2-3b34c8d96aa9.rgu

OEM\OEMMISC
File: bca09377-81f0-4905-a8a8-897bdd01ab7f.rgu

SYS\OEM_HTC_AudioManager_v1
File: CA98E496-F2D1-48a1-845F-9564C294BDF8.rgu

SYS\OEM_Comm_Manager_Pro
File: E3EB2A64-FA84-4c22-82B7-1A6827168C22.rgu

SYS\OEM_VoiceSpeedDial
File: f9f4c477-0eba-4aaf-8ba8-e4111717c0af.rgu

OEM\OEM_Mortscript
File: fa0a6472-d8ae-4238-be28-b677b6638a27.rgu

SYS\OEM_WM6_Sound_Patch
File: fbc20bfd-b133-48fa-9ede-8de970b337e0.rgu

SYS\OEM_HTC_X_Button_v2
File: fdeabb2f-126a-4bc7-8524-ffcfdf7d4481.rgu


Hello sir,. (are you the one in the ipmart forum?? hehehe,.)

Yep, my ROM doesnt have a .rgu a.k.a you cant dump it,.


well, i am now trying to build my own kitchen, WM6.1 removes manifest by itself, so, it cant be dumped with a kitchen,.

should try another tools,.

and, you could try dumping my HTC Atom WM6 Premium,.

Regards,.

[wiepie]

Hello,
I still having problem with buildos.exe and pkg2dmp.exe
it still showing error same as joolawan.

I'm using windows xp sp3. already installed and reinstalled net cf 1.1, 2.0 sp1, 3.0 sp1, 3.5
and visual studio runtime 2005 and 2008.
and already disable antivirus and firewall
but it still cannot executed

i read some pages that tjlabais say pkgcommon.dll 5.2 doesnt quite work well with buildos and pkgtodmp.exe so i search for version 5.1 and already replace the original pkgcommon.dll to the v5.1 but it still cannot executed.

note : dmp2pkg.exe works but after i click open folder it say it need pkgcommon.dll 5.1 and after i replaced the dll with 5.1 it works but still not work for buildos.exe and pkg2dmp.exe

master please help me :)

[-G-]

Hello,
I still having problem with buildos.exe and pkgtodmp.exe
it still showing error same as joolawan.

I'm using windows xp sp3. already installed and reinstalled net cf 1.1, 2.0 sp1, 3.0 sp1, 3.5
and visual studio runtime 2005 and 2008.
and already disable antivirus and firewall
but it still cannot executed

i read some pages that tjlabais say pkg???.dll 5.2 doesnt quite work well with buildos and pkgtodmp.exe so i search for version 5.1 and already replace the original pkg???.dll to the v5.1 but it still cannot executed.

master please help me :)


Okay, reports reported,. :p

[-G-]

Hai, For thoose who cant dump their favourite ROM, you could try to use my NEW kitchen Set,.

I'll Attach it, and dont forget to read the readme,.


For now, who want to build ATOM WM6 Rom, use this Kitchen from me,.


(THREAD Updated)


Regards,.

Kumara,.

[wiepie]

okay will try this one.
btw are this one work with 6.1 rom ??
thank you

Hai, For thoose who cant dump their favourite ROM, you could try to use my NEW kitchen Set,.

I'll Attach it, and dont forget to read the readme,.


For now, who want to build ATOM WM6 Rom, use this Kitchen from me,.


(THREAD Updated)


Regards,.

Kumara,.

[PaSSoA]

Hai, For thoose who cant dump their favourite ROM, you could try to use my NEW kitchen Set,.

I'll Attach it, and dont forget to read the readme,.


For now, who want to build ATOM WM6 Rom, use this Kitchen from me,.


(THREAD Updated)


Regards,.

Kumara,.


Wow, looks like an interesting weekend project for me to try, although I'm having a hard time in understanding how to add your own applications, please let me know if my understanding is correct.

After you've dumped the ROM, there is an OEM and SYS folder, in the OEM folder there are the applications you can remove or add there;
1) Using the cab analiser in hypercore kitchen,
2) Extract all the files from the cab you wish to install under XML to a New folder
3) Change the registry settings for ATOM and copy to another text file
4) Create GUID name and save as .rgu
5) Create another blank document and save as GUID name.dsm
6) Create initflashfiles.txt
7) Copy nbew registry settings file, .rgu, .dsm and initflashfiles.txt into New folder with extracted cab files
8) Copy New folder with all files inside back to OEM folder
9) Run BuildOS.cmd to create new diskimage_Ver.nb0
10) Put diskimage_Ver.nb0 back to original folder where EBOOT, EXTROM, UPDATE.EXE etc. are located.
11) Run update to flash ROM

Now, this is my understanding which is probably wrong, so please have patience :)

Very wonderful guide thx mr Garmin
but i need Some little Help Please
i try to extract your(garmin) wm6.1 rom
and many sys files are missing
can you post the files or direct me to where it comes
thanks you so much

[Missing Manifests]
d92a4f0a-378a-4482-8fd3-bd127a05e4de.dsm
723fb954-d931-4348-b672-82a188e587b5.dsm
1f23b941-38f8-def5-83a6-b0a8eadaa267.dsm

[Missing Files]
SYS\OEM_SIM_TKit
File: 1dc3da02-499f-4547-9fd2-78cddfda9c62.rgu

SYS\SMIME
File: 8cb4ac12-6bc5-4bda-ab45-539988c36a95.rgu

SYS\Bth_A2DP
File: 6b4ed31c-5ced-41b2-b917-2c006f046a5e.rgu

SYS\SqlCeMobile
File: 29356830-10de-437d-ad6a-6c7d60a7dea4.rgu

SYS\WelcomeCenter
File: 40723732-841f-40d3-8dd0-af7d0d6156de.rgu

.......
.......

SYS\OEM_HTC_X_Button_v2
File: fdeabb2f-126a-4bc7-8524-ffcfdf7d4481.rgu

Hello sir,. (are you the one in the ipmart forum?? hehehe,.)

Yep, my ROM doesnt have a .rgu a.k.a you cant dump it,.


well, i am now trying to build my own kitchen, WM6.1 removes manifest by itself, so, it cant be dumped with a kitchen,.

should try another tools,.

and, you could try dumping my HTC Atom WM6 Premium,.

Regards,.

I used your TOUCH Premium edition ROM to dump and it gives the same error messages, must I use the non-touch Premium edition for it to work?

[udayrulz]

That's Correct ..you could use ervis Package Creator to create packages for you .. that would be much simpler

[pdafre4k]

Thx garmin. Yup im was registered on ipmart but not really active there ;)

btw i finally manage to extract wm6.1 and already try to use it.
but seem the "Get Started" doesn't work maybe because i removed the netcf due to the rgu.

so i have some question.

1. Where i can find netcf 3.5 package
2. How to change the 1st splash screen
3. If i added an package do i need to include it on map.txt ??

Thx again :)

[abusalza]

Thx garmin. Yup im was registered on ipmart but not really active there ;)

btw i finally manage to extract wm6.1 and already try to use it.
but seem the "Get Started" doesn't work maybe because i removed the netcf due to the rgu.

so i have some question.

1. Where i can find netcf 3.5 package
2. How to change the 1st splash screen
3. If i added an package do i need to include it on map.txt ??

Thx again :)

Get Started on 19716 is not working anymore. I 'd taken from 19199...
1. Get NetCF 3.5 (http://rapidshare.com/files/84409271/NetCF.3.5.rar.html)
2. The splash screen size is 230,454 bytes (decimal) which means you need to replace the one found in nk.exe starting point is BM6 (search in text string option). Use hex editor - easy as select whole 230,454 bytes starting BM6, then delete. Cut and paste from your new bitmap screen into nk.exe same location
3. No need anymore...

Regards,

[-G-]

NEW WM 6.1 Kitchen Released !!!



Download at the thread above, and dont forget to read the readme file !!!


For the OEM and SYS folder, you could use from the ADD-ON !!!


Enjoy, create and share your OWN ROM !!!


Regards,.


Garmin a.k.a Kumara

[udayrulz]

^^
Here's another great release by Garmin .. i think its time you make a donation link so that forum members can show their appreciation for you ;):D

[pdafre4k]

wow thx mate and you even notified me with your pm :)

i already try the get started from build 19199 but its still not work,maybe its because the netcf was not installed.
the error was "'welcomecenter' is not a valid Pocket PC application"

2. Thx already found the bmp and change the splash screen but i have problem,garmin cooking set was not have included xip.bin, so i take the xip.bin from the old garmin kitchen and i a little confuse how to insert the modified xip.bin to the new garmin cooking set or to the nb

and are the atom xip.bin for wm6 and wm6.1 are the same ??

thx again mate :)

NB: Thx garmin for updating the kitchen. will try it right now :)

Get Started on 19716 is not working anymore. I 'd taken from 19199...
1. Get NetCF 3.5 (http://rapidshare.com/files/84409271/NetCF.3.5.rar.html)
2. The splash screen size is 230,454 bytes (decimal) which means you need to replace the one found in nk.exe starting point is BM6 (search in text string option). Use hex editor - easy as select whole 230,454 bytes starting BM6, then delete. Cut and paste from your new bitmap screen into nk.exe same location
3. No need anymore...

Regards,

[pdafre4k]

Garmin im a little bit confuse with your new cooking set
care to enlight me ??

1. if i want to dump your rom like it say in the readme i just use your 6.1 rom and put it on the rom folder.and run the dump.cmd and i want to build it, which oem and sys do i use ??
the dumped oem and sys from your 6.1 rom or from the bepe oem and sys ??

[PaSSoA]

NEW WM 6.1 Kitchen Released !!!



Download at the thread above, and dont forget to read the readme file !!!


For the OEM and SYS folder, you could use from the ADD-ON !!!


Enjoy, create and share your OWN ROM !!!


Regards,.


Garmin a.k.a Kumara


Wow! That's really fantastic, hopefully you will be able to guide us newbies in continuing to cook good Atom ROMs as experienced people like yourself and uday have no more Atom :( But hopefully those trying to cook Atom ROMs will post here for us to test and keep our old Atom going for at least 1 or 2 more years :D


edit: Tried the cooking sets for both wm6 and wm6.1, BuildOS doesn't work and I'm not too sure what's happening so any advice is appreciated. I used Garmin's WM6 Premium Touch and WM6.1 Last present for the dumping process, both gets dumped fine with some missing rgu messages, made sure both OEM and SYS folders are in the main folder where dump/build is, did not change or edit any files in OEM and SYS folder for testing purpose. When I click on Build, the command prompt shows Stop, Run BuildOS first. This happens for both WM6 and 6.1 cooking sets, could my pc be missing any files, I think .NET is needed but I do update Windows regularly so I think it should have .NET installed.

[PaSSoA]

^^Hmmm...looks like no one else has the same problem as me?

[pdafre4k]

First make sure you have installed net framework 2
and have the sys and oem to the main folder not the dump
after you run build.cmd the buildos will run
and you need to press the play(triangle)button to start the build
after that you close the buildos and the command prompt will resume and
after it finish it you will have nb0 in the flash folder

[PaSSoA]

Yup, have .NET framework 2 SP1 installed, I attached a screenshot to show what happens after I run Build.cmd, buildos.exe refuses to run and I'm not sure why.

For testing purpose, I added a few applications under OEM and changed the welcomehead.96 screen. If I use other versions of buildos.exe like the one from hypercore kitchen, it runs, but the .nb0 file under Flash folder seems to be a copy of the original ROM b'cos when I flashed it, the additional programs does not show up and the splash screen is the same as the original ROM.

[pdafre4k]

[Duplicated] Sorry :)

[pdafre4k]

well im new at this :)
my suggestion was reinstall the netframework 2 and install Microsoft Visual C++ 2008 Redistributable Package (http://www.microsoft.com/downloads/details.aspx?FamilyID=9b2da534-3e03-4391-8a4d-074b9f2bc1bf&DisplayLang=en)

and dont forget to delete all rom files in windows\temp
cos some dsuu does create the file to windows\temp first
if there already the files there it will use the files in windows\temp

it happen to me once,my atom was upgraded to atom exec rom due to the exec rom in the windows\temp folder :D

[serialzs]

i download your new cooking set..
i dump your wm6.1 rom.. there a folder named "test build - make your own rom ;)"
is that right or i have done wrong?

and i run the "garmin build file" it always saying that
Garmin XDA ATOM WM6.1 ROM Builder


STOP!! Please Run BuildOS first!


Press any key to continue . . .

is it right? whats wrong with it?

[PaSSoA]

^^haha, that's the exact problem I faced. I managed to solve it though, thanks pdafre4k! :D

Follow the link pdafre4k gave, download and install .NET framework 3.5, and it solved my problems. Make sure your OEM and SYS folders are in the main folder, you can refer to my screenshot here (http://forum.xda-developers.com/showpost.php?p=1946085&postcount=62) and it should work :)

A question though, after I dump the ROM I built, and try using the package tool, when it creates the OEM and SYS folders, all files are in the SYS folder with none in the OEM. Can I just simply move the folders from SYS to OEM, will it corrupt my build later on?

And if I have a non-english ROM, how can I change the language? I tried searching but the search function doesn't really work properly nowadays. I tried replacing the mui to 409(eng) but when I use the package tool, it still shows as a non-english ROM, which other files must I change?

Thanks all for your help so far...

[serialzs]

another problem..
http://i30.tinypic.com/33trtp3.jpg

any solution?

[PaSSoA]

Happened to me as well, but for a different file, I just deleted that file from the dump folder, seems that it's a duplicate and the package tool can't overwrite it or something. If I'm not wrong, it was marked as read-only.

Can you and whoever else who has cooked their own ROM post some screenshots? Interested to know how others cook their ROM, I have not flashed mine yet, afraid I'll brick my phone. I try to do so over the weekend though ;)

[pdafre4k]

Im glad you solved it :)

^^haha, that's the exact problem I faced. I managed to solve it though, thanks pdafre4k!

What rom are you using for dumping??in garmin rom there are oem folder with many package inside. and i think you can move from sys to oem but becareful not to mess with the os package

A question though, after I dump the ROM I built, and try using the package tool, when it creates the OEM and SYS folders, all files are in the SYS folder with none in the OEM. Can I just simply move the folders from SYS to OEM, will it corrupt my build later on?

The search here really doesnt work for me too :D,try go to google and choose forum.xda-developers.com for the site and search it but sorry cant help you with changing language :)

And if I have a non-english ROM, how can I change the language? I tried searching but the search function doesn't really work properly nowadays. I tried replacing the mui to 409(eng) but when I use the package tool, it still shows as a non-english ROM, which other files must I change?

no problem cos i also still learning :)
Thanks all for your help so far...

[pdafre4k]

just delete one of the file cos you can only have one file at the same name.

btw dont be afraid to upgrade your atom :). cos i flashed it many times and bricked mine a couple time but luckily the solution was just go to bootloader and upgrade again using the original rom :)

and for safe and faster update be sure to update the os files only by using dsuu.exe from pdaviet rom

another problem..

any solution?

[-G-]

Hi all, thanks for you to use my COOKING SETS,.

About "already exist file"
- Means that you have 2 files with the same name, try to close all buildOS, then search the file in OEM or SYS folder (there must be two files with the same name)


About "BuildOS cant run"
- You need to install the latest NET Compact Framework from microsoft
(thanks to pd4fre4k, for providing the link)


About "Cant dump my wm 6.1 ROM"
- my kitchen, removes all manifest and rgu automatically, so i recommend you to use the original files (that i have attached "WM 6.1 SYS Files"), so, after you cook the ROM, and it become "diskimage_Ver.nb0", you cant dump it,.



- try to use the sys files from where i attached, then use the oem files from my "HTC Atom WM6 Premium" and g'reloc, then build,.

Enjoy,.

[pdafre4k]

I already tried to use the sys from bepe hermes extended kitchen.and when i try,it always hang at first splash screen.Could you tell me how to use the g'reloc? what value i must fill it ??

and could you please upload the rgu for the oem files,cos i found it many thing are change from your wm6 oem package and your wm6.1 oem package.

thx bro :)

btw i try to dump medkid wm6.1 and when i create the package using pkgtool,it only create a folder "Make your own rom" lol :D

EDIT: Okay i manage to use bepe extended hermes sys folder and your wm6 oem folders
and g'reloc it.now it can boot.but camera was failed and bluetooth hardware not detected

Hi all, thanks for you to use my COOKING SETS,.

About "Cant dump my wm 6.1 ROM"
- my kitchen, removes all manifest and rgu automatically, so i recommend you to use the original files (that i have attached "WM 6.1 SYS Files"), so, after you cook the ROM, and it become "diskimage_Ver.nb0", you cant dump it,.

- try to use the sys files from where i attached, then use the oem files from my "HTC Atom WM6 Premium" and g'reloc, then build,.

Enjoy,.

[nhathoa]

Hi all,
My BL headset ( http://www.ever-e.com/en/products_details.php?did=28 ) work very good with many devices (ex: Atom Life, TyTNII, Stealth, Nokia...) but not work with my new Atom (WM6.0 and newest WM6.1). How can I cook to fix that bug? :confused:

[-G-]

I already tried to use the sys from bepe hermes extended kitchen.and when i try,it always hang at first splash screen.Could you tell me how to use the g'reloc? what value i must fill it ??

and could you please upload the rgu for the oem files,cos i found it many thing are change from your wm6 oem package and your wm6.1 oem package.

thx bro :)

btw i try to dump medkid wm6.1 and when i create the package using pkgtool,it only create a folder "Make your own rom" lol :D

EDIT: Okay i manage to use bepe extended hermes sys folder and your wm6 oem folders
and g'reloc it.now it can boot.but camera was failed and bluetooth hardware not detected

congratulations mate,. you made it.,

for the bluetooth,.
- change the 2 modules of bluetooth inside SYS folder, with my kumara wm6.1 (just search the module, because wm6.1) cant be dumped still,.

for g reloc address

01F90000
03D30000
9E900000
00000000



Enjoy mate,.


nb: just g'reloc it once, to get more battery drain improvements,. :p

[-G-]

i will realese my new kitchen set,.

if i have a time to upload that big file,. :o

[pdafre4k]

okay thx mate :D
i will wait your new kitchen :)
btw i answered your question on costumer feedback problem ;)

congratulations mate,. you made it.,

for the bluetooth,.
- change the 2 modules of bluetooth inside SYS folder, with my kumara wm6.1 (just search the module, because wm6.1) cant be dumped still,.

for g reloc address

01F90000
03D30000
9E900000
00000000



Enjoy mate,.


nb: just g'reloc it once, to get more battery drain improvements,. :p

[-G-]

okay thx mate :D
i will wait your new kitchen :)
btw i answered your question on costumer feedback problem ;)

Ow, yaaa,.

Thank you so much pd4,.
thats really help,.

Gudluck,.

[start2fight]

is there something wrong with PKGtool.exe or the path of files?
http://forum.xda-developers.com/attachment.php?attachmentid=75170&stc=1&d=1205208621

[-G-]

2fight,.
i dont really know, maybe its your windows setting,.

or maybe you have opened 2 or more cooking tool,.

maybe,. :p

[-G-]

NEW Kitchen Uploaded,.
More Powerfull, and, etc,.

Regards,.
Garmin a.k.a Kumara Putra

[pdafre4k]

wow a very great birthday gift for me :)
and now include oem too :)
hope its for 6.1 :)
will try it
thx
NEW Kitchen Uploaded,.
More Powerfull, and, etc,.

Regards,.
Garmin a.k.a Kumara Putra

[phuonglev]

My BuildOS can not active. What's problem with me?
http://img504.imageshack.us/img504/9144/84272427qd0.jpg

[Ghost_kh_07]

My BuildOS can not active. What's problem with me?
http://img504.imageshack.us/img504/9144/84272427qd0.jpg

Dear Garmin
i try to dump Atom 6.1 but have problem, i can't create OEM and SYS
folder from dump folder
on the pkgtool panel choose dump folder but have problem:

[Selected Path]
D:\Garmin ATOM WM6 Kitchen\dump

[Core OS]

[Versions]

[Language]

[DPI]

[Certificates]

[Missing Manifests]
can you help me!
thank you very much!

[tjkhattak61]

Yeh, same for me as of Ghost_kh_07.:confused:



Got it rgu and dsm missing :cool:

[tofy]

i was fried about rom my mobile may be stop

[bravedoan]

Yeh, same for me as of Ghost_kh_07.:confused:



Got it rgu and dsm missing :cool:

P7 & p8 will answer yr question.

[bravedoan]

Hello sir,. (are you the one in the ipmart forum?? hehehe,.)

Yep, my ROM doesnt have a .rgu a.k.a you cant dump it,.


well, i am now trying to build my own kitchen, WM6.1 removes manifest by itself, so, it cant be dumped with a kitchen,.

should try another tools,.

and, you could try dumping my HTC Atom WM6 Premium,.

Regards,.

Hi Garmin, can you teach me how to get those missings by myself or where can I get it? I really want to build my own ROM from N-Touc's Abusalza!!!

[abumhmmd1]

O2 ATOM Pure ROM WM6.1 CE OS 5.2.19213 BUILD 19213 by Khoa_ha

http://i297.photobucket.com/albums/mm206/khoa_ha_2008/khoa/Capture.jpghttp://i297.photobucket.com/albums/mm206/khoa_ha_2008/khoa/Capture005.jpg
http://i297.photobucket.com/albums/mm206/khoa_ha_2008/khoa/Capture009.jpghttp://i297.photobucket.com/albums/mm206/khoa_ha_2008/khoa/Capture006.jpg

>>> http://forum.xda-developers.com/showthread.php?p=2256321&posted=1#post2256321

[homer285]

Has anyone fixed Activesync via bluetooth issues in previous rom builds? if so how.. I compare registry with a working rom and all seems fine but what I have noticed is where in previous roms selecting "com port 5" would result in an error msg, "this port is in use please choose another port" or something like that. In 19949 (at least in my version) I can select any port without the error msg which seems strange considering irda use port 2 or 3. Anyhow if some guru can shine light on this I will have an almost bug free rom, cheers.

[gaurav_ahujaa]

Can i use these tools to cook ROMs for stealth.....Even stealth's flash file has a .nb0 extension....Can i extract its components using these tools????

[prash0715]

Has anyone fixed Activesync via bluetooth issues in previous rom builds? if so how.. I compare registry with a working rom and all seems fine but what I have noticed is where in previous roms selecting "com port 5" would result in an error msg, "this port is in use please choose another port" or something like that. In 19949 (at least in my version) I can select any port without the error msg which seems strange considering irda use port 2 or 3. Anyhow if some guru can shine light on this I will have an almost bug free rom, cheers.

aii hav used active sync with blootooth via older ROMS:D

[elm4kids]

1. Extract "Garmin XDA ATOM Cooking Sets" to somewhere you like, (There will be an original OEM and SYS folder, don't erase those, it required for dumping process,.)
2. Put your diskimage_ver.nb0 into ROM folder, (overwrite the original file there,.)


----> where and how to find diskimage_ver.nb0 ?? i've no idea dude help me with picture if u guy's a really kinda ppl

[kumkum]

when iam going to start build os .cmd it says that,''the application has failed to start because its side by side configuration is incorrect pls see the application log for more detail

can any 1 tell me that whats the problem?

[kwchan]

how can i edit the config.txt for customisation? I would like to autorun some CAB files in extended rom

thanks

[ccKelvincc]

Hi, Im ccKelvincc. a new member here.

I need help to upgrade my O2 atom to a stable WM6 but i am not very techie. is there any treads in here or any help to upgrade with easy instructions?

thank you in advance! have a nice day

[_happyPit_]

hi.
please, somebody tell me can i use this tool to dump Atom Exec rom (downloaded in the next tread (http://forum.xda-developers.com/showthread.php?t=433600))?

because if I do....:

seems like package tool doesn't work for me.
After I shows the dump folder, PT writes:


[Selected Path]
C:\Atom Roms\Garmin WM 6.1 Cooking Sets\dump

[Core OS]

[Versions]

[Language]

[DPI]

[Certificates]

[Missing Manifests]

than I go to tools -> build package and that's all: PM makes two folders SYS and OEM in the dump folder and nothing more happens. Content of SYS is 3 small folders, OEM-folder is empty at all. I wait for long enough: still nothing. Build package item is gray. :(
thnx

[bravedoan]

It's meant that this ROM was locked or all GRU files were hidden by Cooker. Only high experienced Cookers can know how to get them back.

[r-care]

hi..i am a totally beginner in this rom cooking...After read lots of thread about cooking, i still didnt understand.can anybody tell me how to dump rom for atom life? can i use cooked rom e.g rom cooked by medkid? if yes, how? lots of cooked rom i had downloaded in "AL1.DIO" format, so how to make it be as "diskimage_ver.nb0"

it will be nice if some one can make a pdf file of rom cooking manual... thats all...thanx

[edohsetiawan]

ATOM WM 6 AND WM 6.1 ROM COOKING TUTORIAL

nb: try it at your own risk,.


WHAT DO YOU NEED?
- Hypercore Kitchen (http://forum.xda-developers.com/showthread.php?t=310076)
- Garmin XDA ATOM ROM Cooking Sets (UPDATED 14/03/08) (http://rapidshare.com/files/99367619/Garmin_XDA_ATOM_Cooking_Sets__14032008_.rar.html)

ADD-ON
- WM 6.1 SYS files (http://rapidshare.com/files/88850555/HERMES_DEV_v2.1_Build_19199.rar)



Usage Of Hypercore Kitchen
- Creates OEM and anything related to OEM

Usage of ATOM WM6 Kitchen
- Dump your diskimage_ver.nb0
- Build your new diskimage_ver.nb0


Already have it all?? Alright, now lets start working,.

1. Extract "Garmin XDA ATOM Cooking Sets" to somewhere you like, (There will be an original OEM and SYS folder, don't erase those, it required for dumping process,.)
2. Put your diskimage_ver.nb0 into ROM folder, (overwrite the original file there,.)


3. Run "DumpFiles.cmd" , (Then you'll see a working progress, until it ask you to press any key) ---- press any key then,.
4. There will be a new window come named "Package Tool", then Open where the "dump" folder is located, (The package tool help you build your OEM and DSM,.)

http://i225.photobucket.com/albums/dd142/heaven_approach/Empat.png




5. Go to \Tools\Build Package, you will not see a working progress, when the content of the Package tool was changed, ITS DONE!!, and your diskimage_Ver.nb0 was dumped,.
(The original OEM and SYS folder will be gone,.)



--- Now go to "dump" folder and you'll see OEM and SYS folder ---


nb : If there are some files outside OEM / SYS folder, put it where it should by reading the last line of your package tool, after building a package,.

http://i225.photobucket.com/albums/dd142/heaven_approach/Lima.png
----------> means that these file should be in \SYS\NetCF folder,.



OKAY, take a rest first, have some experience with that OEM and SYS folder,.
You may change, add or remove some folder there, but BECAREFUL, some of them are SYSTEM file!!!



Satisfied experience with OEM and SYS folder?? Lets Continue,.

6. Now move your OEM and SYS folder (inside "dump" folder), to the first page (Where the original OEM and SYS is located)

http://i225.photobucket.com/albums/dd142/heaven_approach/Enam.png




7. Run "BuildOS.cmd" (You will see a new window "BulidOS",.) press the green button,.

http://i225.photobucket.com/albums/dd142/heaven_approach/Tujuh.png




8. When done, (you could see on the bottom left corner, written "Done"), close the BuildOS by pressing the [X] Button, (dont close the BuildOS.cmd)
9. You will see in the BuildOS.cmd, a progress, wait till it ask you to press any key,. ----- Press any key then,.
10. There you are, your new diskimage_Ver.nb0 is inside "FLASH" folder,.



Nb: For a tutorial about building an OEM, could be seen HERE (http://forum.xda-developers.com/showthread.php?t=345964), and How To Port XIP and SYS folder, could be seen HERE (http://forum.xda-developers.com/showthread.php?t=357249),.





nb: For WM 6.1 Cooking, you couldn't DUMP your ROM, because it removes all manifest to be one,.




GOOD LUCK,.

Happy ROM Cooking to all of you,.




- Kumara -

Hello i'm atom exec user. I'm newbiw member in this forum...So please help me if i have some difficulties

[tjkhattak61]

What difficulties?????

[dib0231]

because when I want to install a rom pc via my rw6815 starts the software "mnx diagnostic manager" and prevents the update of the rom?:mad::mad::mad::mad::mad:

[dejx]

does this thread also applies for hp rw68xx????

[oza_crazy]

i do really wanna Cook an ATOM ROM with WM6.5 build, but in barebone.
(only want the scrolling feature and the honeycomb start menu).

i've read entire post in this thread, also the other thread which Link is provided here. and i have a few QUESTION....

1. Can We port WM6.5 using all of this thread provided? how to? what is the different?

2. How much Mb pagepool we need to have a stable WM6.5 ROM? i have tried several Khoa_Ha WM6.5 ROM. it is beautifull, but... always restart when the battery under 50%, or...in the middle when i'm Browsing the internet.

3. what needed to be removed when we wanna 28-30 Mb free RAM after soft reset? i mean, like ULDR partition... if there were. (sorry, i'm Blind of Cooking)

4. how to make STK Works (i need the mobile banking feature)?
5. will there is Someone kind enough to give me the right direction of cooking?

pardon me for asking this, also for my bad English....

:)

[kikilai]

ATOM WM 6 AND WM 6.1 ROM COOKING TUTORIAL

nb: try it at your own risk,.


WHAT DO YOU NEED?
- Hypercore Kitchen (http://forum.xda-developers.com/showthread.php?t=310076)
- Garmin XDA ATOM ROM Cooking Sets (UPDATED 14/03/08) (http://rapidshare.com/files/99367619/Garmin_XDA_ATOM_Cooking_Sets__14032008_.rar.html)

ADD-ON
- WM 6.1 SYS files (http://rapidshare.com/files/88850555/HERMES_DEV_v2.1_Build_19199.rar)



Usage Of Hypercore Kitchen
- Creates OEM and anything related to OEM

Usage of ATOM WM6 Kitchen
- Dump your diskimage_ver.nb0
- Build your new diskimage_ver.nb0


Already have it all?? Alright, now lets start working,.

1. Extract "Garmin XDA ATOM Cooking Sets" to somewhere you like, (There will be an original OEM and SYS folder, don't erase those, it required for dumping process,.)
2. Put your diskimage_ver.nb0 into ROM folder, (overwrite the original file there,.)


3. Run "DumpFiles.cmd" , (Then you'll see a working progress, until it ask you to press any key) ---- press any key then,.
4. There will be a new window come named "Package Tool", then Open where the "dump" folder is located, (The package tool help you build your OEM and DSM,.)

http://i225.photobucket.com/albums/dd142/heaven_approach/Empat.png




5. Go to \Tools\Build Package, you will not see a working progress, when the content of the Package tool was changed, ITS DONE!!, and your diskimage_Ver.nb0 was dumped,.
(The original OEM and SYS folder will be gone,.)



--- Now go to "dump" folder and you'll see OEM and SYS folder ---


nb : If there are some files outside OEM / SYS folder, put it where it should by reading the last line of your package tool, after building a package,.

http://i225.photobucket.com/albums/dd142/heaven_approach/Lima.png
----------> means that these file should be in \SYS\NetCF folder,.



OKAY, take a rest first, have some experience with that OEM and SYS folder,.
You may change, add or remove some folder there, but BECAREFUL, some of them are SYSTEM file!!!



Satisfied experience with OEM and SYS folder?? Lets Continue,.

6. Now move your OEM and SYS folder (inside "dump" folder), to the first page (Where the original OEM and SYS is located)

http://i225.photobucket.com/albums/dd142/heaven_approach/Enam.png




7. Run "BuildOS.cmd" (You will see a new window "BulidOS",.) press the green button,.

http://i225.photobucket.com/albums/dd142/heaven_approach/Tujuh.png




8. When done, (you could see on the bottom left corner, written "Done"), close the BuildOS by pressing the [X] Button, (dont close the BuildOS.cmd)
9. You will see in the BuildOS.cmd, a progress, wait till it ask you to press any key,. ----- Press any key then,.
10. There you are, your new diskimage_Ver.nb0 is inside "FLASH" folder,.



Nb: For a tutorial about building an OEM, could be seen HERE (http://forum.xda-developers.com/showthread.php?t=345964), and How To Port XIP and SYS folder, could be seen HERE (http://forum.xda-developers.com/showthread.php?t=357249),.





nb: For WM 6.1 Cooking, you couldn't DUMP your ROM, because it removes all manifest to be one,.




GOOD LUCK,.

Happy ROM Cooking to all of you,.




- Kumara -


HI ~~ I'm a HK user , I haven't any computer Knowledge, I would like to upgrade my Xda Atom from WM 5.0 to WM 6.0 . I have followed your instruction to cook the Rom , I'm very happy, I have cooked the Rom successfully , I can see the New Rom in FLASH folder,

But What is the Next step ??
OEM Building or WM6 XIP and SYS Porting
Please teach me.

Thanks