mda vario 2 upgrade not possible...???!!! cannot connect to activesync with usb

[dennisv9]

i have bought a second hand mda vario 2 (=tmobile branded htc hermes). when i connect a usb cable, it charges fine, but i believe the usb connector is broken. it charges fine, if you put the cable under a certain angle. leaving aside this problem which is impossible to fix, it is not able to connect through activesync!!!!! so i cannot update the rom. the device is simunlocked, but not cid unlocked. i tried to download Des' SSPL program and ran it while renaming the wm6 rom to HERMIMG.nbh (off course i extracted both executables, after which i ended up with RUU_signed.nbh (93 mb). i renamed this to HERMIMG.nbh). so i put the des sspl program and the renamed image on a format sd card and ran des sspl. but off course, it did not work... since it is not supercid, it cannot upgrade from sd card.

so does anyone have a solution to supercid the device without using the usb cable to activesync (bluetooth activesync maybe???) so i can do a sd flash?
maybe someone else has a solution to upgrade both the rom (os) and radio rom??
any help is appreciated.

i've tried mtty ==> but usb is not recognized at all, so that didn't do me any good
can i apply hard-spl over a bluetooth connection?
same question for removing the cidlock, can i remove the cidlock with an bluetooth active sync connection?
i also tried another computer, different usb cables, reinstalled activesync several times, tried as4.2 and 4.5 on the different computers... the usb cable only charges the unit, it is not recognized as a usb device.
i also tried several hard reset with and without letting the extended (tmobile) rom install.

[dennisv9]

problem fixed

[nitin_agarwal]

Hi,

I am also trying to update my ROM for MDA Vario II. How were you able to fix the problem. Can you pls. let me know.

Thanks,

[hlasith]

1. get a Micro Sd card under 2Gb ..
2. Format sd card Fat 32.

3.rename the rom file to HERMIMG.nbh.

4.copy the HERMIMG.nbh to Microsd card root.

5.Put back the Micro Sd card to the phone.

6.Hold ok button + power button and push the reset button by styles pen.

this will automatically start to install the rom.:):)

[+ Que PPC]

PLEASE be sure you all are hardspled before do any any any any any any upgrade or rom change!!!!

[ultramag69]

Yep, What + Que PPC said, only in caps....
don't have Hard SPL, you're probably looking at a brick unless you're REALLY lucky and the rom is compatible with your carrier (NOT LIKELY).