[REF]Recover HTC Touch from tricolors RUU boot-loader (Mtty)[ONLINE]

[andrewloh]

This is the tricolor RUU boot-loader:
http://www.ismodel.net/forum/richedit/upload/2kcf486c647d.jpg

1) Disable USB in your ActiveSync program.
http://www.ismodel.net/forum/richedit/upload/2k08f7e6a5b2.jpg

2) Download and run the mtty.exe (http://andrewloh.com/mtty.exe)

3) Change the port to "USB" & Flow control to "RTS/CTS"
http://www.ismodel.net/forum/richedit/upload/2k66e8168767.jpg

4) Press <Enter> once and you should able to see "Cmd>"

5) Issue the following command:
http://www.ismodel.net/forum/richedit/upload/2k3905d74812.jpg

Cmd>password BsaD5SeoA
Pass.
+ SD Controller init
- SD Controller init
+StorageInit
SDInit+++
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDInit - SD ver1.0
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDInit: ACMD41 wait for power up bit timeout
+ SD Controller init
- SD Controller init
+StorageInit
SDInit+++
SDInit - SD ver2.00
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd55 Card status error in response. MMC_STAT = 4000
SDInit: ACMD41 wait for power up bit timeout
g_cKeyCardSecurityLevel = FF
HTCEType (0x1)(Operation mode flag): cOpModeFlag=(0x0).
Type (0x2)(Back color flag): cBackColorShowFlag=(0x1).
Type (0x5)(Background color value): g_wBColor=(0xC618) (0xC0C0C0).
HTCST
Cmd>ruurun 0
Cmd>ResetDevice

[StratOS_HTC]

any chance of flashing ?

wdata &
erase &
rbmc functions ?

[mkhattab]

Still stuck at the 'smart mobility' screen if I don't enter bootloader

[andrewloh]

1) Simultaneous press and hold "Power" and "Camera" key.
2) Press "Reset" once with the stylus and then release all keys.

http://www.ismodel.net/forum/richedit/upload/2k8717f0174d.jpg

[andrewloh]

Still stuck at the 'smart mobility' screen if I don't enter bootloader

then I think you have to try flash a original ROM suit your device in boot-loader.

[mkhattab]

also doesn't work...
I think I need to find a way to downgrade SPL or even re-install my existing SPL (2.20)

[andrewloh]

i just learnt that very important before to flash ROM:

REMOVE SD Card (Maybe only MicroHCSD, but I think better to remove all SD Card)

[GadgetManiac]

Hi Andrew,

I just bought my Touch and got stuck at this screen when trying to upload a new ROM to it.
Thanks for this tip, man. I've saved me.

Regards!

Paulo.

[KTYTN]

My TyTN II is frozen at the Smart Mobility screen and restarts constantly. I have tried soft restart, hard restart and nothing changes. When it happened I had to soft reset my phone after my "Phone in the phone" stopped working proplerly. I hit the soft reset button and the it just freezes in Smart Mobility and then restarts, vibrates, freezes and etc.. Soft restet does not do anyting, hard reset goes through the process of cleaning and reseting and then nothing, the same problem keeps coming up. Does anyone have any ideas?

[andrewloh]

did you tried to flash an original ROM from manufacturer in the tricolor boot-loader ? i think this is the only way to make it work again first, although I didn't tried b4.

i think the root cause is, your ROM is incomplete or corrupted, you can't update any 3rd party ROM because only special 'blank' boot-loader will eat 'em. so, what you need to do is to find an original ROM suit your hardware.

[a2612596]

Downloading the original rofrom my carrier AT&T & installing has worked atleast 4 to 5 times for me.

[andrewloh]

Continue...

How to flash back the original HTC ROM ?
Or, when your ROM data have problem, it can boot to tricolors boot-loader only.

1, Make sure your HTC Touch is on the tricolors RUU boot-loader, and being connected to your PC.
http://www.ismodel.net/forum/richedit/upload/2k9ba1352fd2.jpg

2, download and run the ROM image from HTC site, it works for my HTC Touch (Soft Black)
http://www.dopodasia.com/download/RUU_Elfin_DOPODASIA_WWE_2.20.707.1B_4.1.13.51_03.0 7.90_BLUE_Ship_Reduced.exe (http://www.dopodasia.com/download/RUU_Elfin_DOPODASIA_WWE_2.20.707.1B_4.1.13.51_03.0 7.90_BLUE_Ship_Reduced.exe)

3, Suppose it can regonize your Touch.
http://www.ismodel.net/forum/richedit/upload/2k71b8ba6aa6.jpg

[andrewloh]

4, Continue and let it goes through the process in your Touch and your PC.
http://www.ismodel.net/forum/richedit/upload/2kff196d09b2.jpg
http://www.ismodel.net/forum/richedit/upload/2k1d5671ae7d.jpg

5, Congratulations !
http://www.ismodel.net/forum/richedit/upload/2k8ae86e2df4.jpg

6, ROM version 2.20.707.1B is flashed to your HTC Touch.
http://www.ismodel.net/forum/richedit/upload/2k9d42b173a4.jpg

[tintin007]

i have same problem and was following ur tips from begining......after that cmd stuff......now i have black screen with writen on it smart mobility.....and i tried every way to come back to boot loader but failed so stuck no where......need ur help....:mad: :mad: :mad:

[tintin007]

:) I WAS STUCK AND WITHOUT UR ARTICLE AND DETAIL DESCRIPTION I WOULD BE LOST ......i do not know much but always fingring my hard and software and than running for help...... ur whole description is master piece plz add one point there.....if u need to have a bootloader screen another way is ......... 1..switch power off...2.take usb out...3.press camera button... 4.put usb back.....it will be bootloader screen.... chheersss...

[d8302530]

i have same problem and was following ur tips from begining......after that cmd stuff......now i have black screen with writen on it smart mobility.....and i tried every way to come back to boot loader but failed so stuck no where......need ur help....:mad: :mad: :mad:

You can enter bootloader by doing this:

Hold down the camera button and reset device with the stylus. Release the reset and continue holding the camera button until you see a tricolor bootloader screen.

[tintin007]

i was stuck on bootloader after flashing rom and with help in this thread i manage to flash and now problem is i am un able to flash a rom with more free space....... when i try i stuck on screen with a penguin and saying ipl spl loading and nothing happens.........can some one help...plz:mad:

[shael]

keep trying sometimes it takes a few trys b4 you cana cutally get to the blank white screen after completing the CID unlock

[kolobok01]

This is the tricolor RUU boot-loader:
http://www.ismodel.net/forum/richedit/upload/2kcf486c647d.jpg

1) Disable USB in your ActiveSync program.
http://www.ismodel.net/forum/richedit/upload/2k08f7e6a5b2.jpg

2) Download and run the mtty.exe (http://andrewloh.com/mtty.exe)

3) Change the port to "USB" & Flow control to "RTS/CTS"
http://www.ismodel.net/forum/richedit/upload/2k66e8168767.jpg

4) Press <Enter> once and you should able to see "Cmd>"

5) Issue the following command:
http://www.ismodel.net/forum/richedit/upload/2k3905d74812.jpg

Cmd>password BsaD5SeoA
Pass.
+ SD Controller init
- SD Controller init
+StorageInit
SDInit+++
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDInit - SD ver1.0
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDInit: ACMD41 wait for power up bit timeout
+ SD Controller init
- SD Controller init
+StorageInit
SDInit+++
SDInit - SD ver2.00
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd55 Card status error in response. MMC_STAT = 4000
SDInit: ACMD41 wait for power up bit timeout
g_cKeyCardSecurityLevel = FF
HTCEType (0x1)(Operation mode flag): cOpModeFlag=(0x0).
Type (0x2)(Back color flag): cBackColorShowFlag=(0x1).
Type (0x5)(Background color value): g_wBColor=(0xC618) (0xC0C0C0).
HTCST
Cmd>ruurun 0
Cmd>ResetDevice


I’m truing your method and as I understood I have to copy rom file on SD card and fallow your instructions.

I have 2GB SD card

I copy file to SD card it ELF0ING.nbh

Booted to three color mode and follow your instructions and that what I got and it’s stays at ) present.

password BsaD5SeoA
Pass.

+ SD Controller init

- SD Controller init

+StorageInit

SDInit+++
SDInit - SD ver2.00
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd55 Card status error in response. MMC_STAT = 4000
SD Ver2.00: Low Capacity
SD clock to 24MHz
***** user area size = 0x78000000 Bytes

SDInit---
SDInit OK

g_cKeyCardSecurityLevel = FF

HTCEType (0x1)(Operation mode flag): cOpModeFlag=(0x0).

Type (0x2)(Back color flag): cBackColorShowFlag=(0x1).

Type (0x5)(Background color value): g_wBColor=(0xC618) (0xC0C0C0).

HTCST
Cmd>ruurun 0

Cmd>ResetDevice

[eboy44]

what rom is the original rom for my touch if my spl and ipl are IPL 2.20.0002
SPL 2.20.0000

[roshak]

I get Error [207] and the device restarts on 3% .?!

[tiftof]

are you sure it's 207 and not 270? If it's 270 you should have searched and found this: http://forum.xda-developers.com/archive/index.php/t-325910.html

Removing sim + SD before flashing. If that doesn't help, they seem to suggest to flash from SD in that thread.

[KarIBP]

4, Continue and let it goes through the process in your Touch and your PC.
http://www.ismodel.net/forum/richedit/upload/2kff196d09b2.jpg
http://www.ismodel.net/forum/richedit/upload/2k1d5671ae7d.jpg

5, Congratulations !
http://www.ismodel.net/forum/richedit/upload/2k8ae86e2df4.jpg

6, ROM version 2.20.707.1B is flashed to your HTC Touch.
http://www.ismodel.net/forum/richedit/upload/2k9d42b173a4.jpg



My touch is still at 0% nothing happen what did i wrong?? help

[Soulbringer320]

Finally it's working again........


Thanks Mate...:D

[HTC-sync]

:D :D thank u very much.. I was already looking at obtaining a replacement, but this was a life saver.. I must commend all the experts on this site, and I hope you will be blessed greatly for all your help:p

[yke013]

Broke my Xmas gift !!! :)
I've updated my radio ROM & my HTC seems dead now...
When starting it I've got the Orange logo... then nothing, black screen.

Remove all card (Xd, SIM).
Remove battery, tried soft & hard reset... try the ResetDrive... does not fix
I've been reading all I can found on forum since
I did go through the boot loader & flash a new ROM (Blue_Touch_OS_1921_Build 18521.0.7.0_Big_Stor_58Mb_V3.02)... does not fix

Please help, advise...
Thanks.

HTC Touch (ELFIN)
Opérateur 23.221.2.741
ROM 2.21.74.1B FRE
Radio 02.91.90
Proto 4.1.13.43
WIN SE CE 5.2.1623 (Build 18129.0.4.5)

[Swiftblade]

Broke my Xmas gift !!! :)
I've updated my radio ROM & my HTC seems dead now...
When starting it I've got the Orange logo... then nothing, black screen.

Remove all card (Xd, SIM).
Remove battery, tried soft & hard reset... try the ResetDrive... does not fix
I've been reading all I can found on forum since
I did go through the boot loader & flash a new ROM (Blue_Touch_OS_1921_Build 18521.0.7.0_Big_Stor_58Mb_V3.02)... does not fix

Please help, advise...
Thanks.

HTC Touch (ELFIN)
Opérateur 23.221.2.741
ROM 2.21.74.1B FRE
Radio 02.91.90
Proto 4.1.13.43
WIN SE CE 5.2.1623 (Build 18129.0.4.5)

Which radio ROM did you use to flash onto your ELFin? And you have flashed your ELFin with the Blue Touch ROM V3.02 which is meant for the original Touch (ELF) ROM. This is causing the problem.

Try to flash to the Blue ELFin ROM V2.01 from the download link found in my signature to correct it. IF this failed, lok for the original French ELFin ROM and flash it to your device using bootloader mode.
GOOD LUCK!

[yke013]

I was trying to burn Audio ROM Elf_Radio_03.07.90

You are 100 percent true I did use a wrong ROM !
It's easy to mix-up & mess up between ELF / ELFIN = TOUCH / TOUCH XL...

Meanwhile I've tried ROM
RUU_Elfin_DOPODASIA_WWE_2.20.707.1B_4.1.13.51_03.0 7.90_BLUE_Ship_Reduced.exe and my HTC device is back !!!


I'll try the Blue_ELFin_ROM_V2.01.zip


Thanks a lot...

HTC Touch XL (ELFIN)
Opérateur 23.221.2.741
ROM 2.21.74.1B FRE
Radio 02.91.90
Proto 4.1.13.43
WIN SE CE 5.2.1623 (Build 18129.0.4.5)

[Swiftblade]

I was trying to burn Audio ROM Elf_Radio_03.07.90

You are 100 percent true I did use a wrong ROM !
It's easy to mix-up & mess up between ELF / ELFIN = TOUCH / TOUCH XL...

Meanwhile I've tried ROM
RUU_Elfin_DOPODASIA_WWE_2.20.707.1B_4.1.13.51_03.0 7.90_BLUE_Ship_Reduced.exe and my HTC device is back !!!


I'll try the Blue_ELFin_ROM_V2.01.zip


Thanks a lot...

HTC Touch XL (ELFIN)
Opérateur 23.221.2.741
ROM 2.21.74.1B FRE
Radio 02.91.90
Proto 4.1.13.43
WIN SE CE 5.2.1623 (Build 18129.0.4.5)

Glad to hear you got your device working again!:D

Good Luck and Happy New Year!

[Jura_ZG]

Glad to hear you got your device working again!:D

Good Luck and Happy New Year!

Swiftblade, i was trying to flash your new ROM v4 but it failed. I had your previous version installed.
USPL didn't work(it was stuck with pingvin screen) so now i'm stuck in bootloader.
IPL is 1.11.0002
SPL is 1.11.0000

What shoud I do. Shoud I try hard reset first or mtty?
HELP!


OK, i've softreset my Touch so I'm back to 3.21 ROM.

[johnnygmo]

Hello, I changed Pool Memory Size to 4MB following XDA post, but the procedure failed and the ActiveSync don’t detect my HTC Touch phone and I don’t have recovery the backup that I did before the procedure. The battery indicator in the home screen has exclamation symbol, the phone and wifi doesn’t work. :(
I did reset using mtty procedure in this post but my phone has the same problem. How to use the command PDOCWRITE without ActiveSync, how to recover the backup in .nb file using mtty application. My phone information is

ROM 1.11.707.1B WWE
ROM Date 05/24//07
Radio Version 02.93.90
Protocol Ver 4.1.13.42
ExtROM Ver 1.11.707.101
Language : English

Thanks

[andrewloh]

Hello, I changed Pool Memory Size to 4MB following XDA post, but the procedure failed and the ActiveSync don’t detect my HTC Touch phone and I don’t have recovery the backup that I did before the procedure. The battery indicator in the home screen has exclamation symbol, the phone and wifi doesn’t work. :(
I did reset using mtty procedure in this post but my phone has the same problem. How to use the command PDOCWRITE without ActiveSync, how to recover the backup in .nb file using mtty application. My phone information is

ROM 1.11.707.1B WWE
ROM Date 05/24//07
Radio Version 02.93.90
Protocol Ver 4.1.13.42
ExtROM Ver 1.11.707.101
Language : English

Thanks

Hi johnnygmo,

pls manually make your Touch go to 3 colors mode
http://forum.xda-developers.com/showpost.php?p=1698084&postcount=4

and then re-flash an original ROM.

[johnnygmo]

I followed your suggestions and re-flash Blue Touch ROM 4.0 and now everything is Ok, my Elf woks and has new look.
Thanks Andrewloh

[Claus Tørnes]

then I think you have to try flash a original ROM suit your device in boot-loader.

Hi

I am really lost :S Have read many different threads and tried many different methods, but my touch just continues to reset after showing the "smart mobility" screen. I can still enter the boot loader screen.

I have tried your method for several times now, but I keep getting the 270 error. I have tried different computers and ROM´s but nothing seems to help. When I run the mtty I have noticed that it shows RUU in the upper right corner. It doesnt show that if I dont run the mtty. Is that normal or?

[andrewloh]

Hi

I am really lost :S Have read many different threads and tried many different methods, but my touch just continues to reset after showing the "smart mobility" screen. I can still enter the boot loader screen.

I have tried your method for several times now, but I keep getting the 270 error. I have tried different computers and ROM´s but nothing seems to help. When I run the mtty I have noticed that it shows RUU in the upper right corner. It doesnt show that if I dont run the mtty. Is that normal or?


Hi Claus,

In this case, I don't think you need to use mtty.

1, Pls remove SDHC card if any.

2, Reset your device to 3 colors mode
http://www.ismodel.net/forum/richedit/upload/2k8717f0174d.jpg

3, Download and run original ROM image that fit your device, and also language.
e.g. http://www.dopodasia.com/download/RUU_Elfin_DOPODASIA_WWE_2.20.707.1B_4.1.13.51_03.0 7.90_BLUE_Ship_Reduced.exe (http://www.dopodasia.com/download/RUU_Elfin_DOPODASIA_WWE_2.20.707.1B_4.1.13.51_03.0 7.90_BLUE_Ship_Reduced.exe) for english.

If you follow these but still not working, then I have no more idea. You may need to RTM :(

[Claus Tørnes]

Thanks a lot for helping. The ROM you linked, can I use it for a normal elf?

[andrewloh]

Thanks a lot for helping. The ROM you linked, can I use it for a normal elf?


yes, pls refer the following for different color version:
http://forum.xda-developers.com/showthread.php?t=345686

[Claus Tørnes]

Ok thanks :)

[Mr. Guy]

Hi, i'm stuck in bootloader so this i my last option. I also tried to flash original, but unsuccesfull.

What is the step after copying the tekst into mtty, could somebody walk me through, so I can hopefully get my touch back working?

[Mr. Guy]

Hi, i'm stuck in bootloader so this i my last option. I also tried to flash original, but unsuccesfull.

What is the step after copying the tekst into mtty, could somebody walk me through, so I can hopefully get my touch back working?

Hi Andrewloh

Please, could you walk me through the steps, cause have tried everything. This is my last option before I'm returning my touch.

[Claus Tørnes]

If I had a little more knowledge to this I would help you, but I am also stuck. :(

[pmsumner]

Hi,

I've read through the posts here and whilst am waiting for the stock ROM to download thought I'd ask...

I'm using an MDA Touch (I think it's an Elfin) and I've managed to bork it within 24rs. Not exactly sure how as I only tried to unlock it using the tools posted here (http://forum.xda-developers.com/showthread.php?t=320155). The unit came back up OK first time but when reset again it only comes up with the T-Mobile logo and then turns off.

I can get it into tri-colour (bootloader?), but can NOT get mtty to communicate from a Vista PC. It comes up with the error "USB port can not open". I CAN flash other ROMs to it but I suspect I may have the same problem as someone in this thread (http://forum.xda-developers.com/archive/index.php/t-325910.html) where they could only flash the stock ROM because it didn't unlock properly.

Can anyone advise on whether mtty should be able to communicate with the device from a Vista PC and what might need to be done to make it happen?

[andrewloh]

Hi,

I've read through the posts here and whilst am waiting for the stock ROM to download thought I'd ask...

I'm using an MDA Touch (I think it's an Elfin) and I've managed to bork it within 24rs. Not exactly sure how as I only tried to unlock it using the tools posted here (http://forum.xda-developers.com/showthread.php?t=320155). The unit came back up OK first time but when reset again it only comes up with the T-Mobile logo and then turns off.

I can get it into tri-colour (bootloader?), but can NOT get mtty to communicate from a Vista PC. It comes up with the error "USB port can not open". I CAN flash other ROMs to it but I suspect I may have the same problem as someone in this thread (http://forum.xda-developers.com/archive/index.php/t-325910.html) where they could only flash the stock ROM because it didn't unlock properly.

Can anyone advise on whether mtty should be able to communicate with the device from a Vista PC and what might need to be done to make it happen?

i didn't try, but you may try this solution at the moment:
http://forum.xda-developers.com/showthread.php?t=291723

otherwise, you still have to find a XP box.

[pmsumner]

Thanks, will have a go at it today.

[zergdefense]

This is the tricolor RUU boot-loader:
http://www.ismodel.net/forum/richedit/upload/2kcf486c647d.jpg

1) Disable USB in your ActiveSync program.
http://www.ismodel.net/forum/richedit/upload/2k08f7e6a5b2.jpg

2) Download and run the mtty.exe (http://andrewloh.com/mtty.exe)

3) Change the port to "USB" & Flow control to "RTS/CTS"
http://www.ismodel.net/forum/richedit/upload/2k66e8168767.jpg

4) Press <Enter> once and you should able to see "Cmd>"

5) Issue the following command:
http://www.ismodel.net/forum/richedit/upload/2k3905d74812.jpg

Cmd>password BsaD5SeoA
Pass.
+ SD Controller init
- SD Controller init
+StorageInit
SDInit+++
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDInit - SD ver1.0
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDInit: ACMD41 wait for power up bit timeout
+ SD Controller init
- SD Controller init
+StorageInit
SDInit+++
SDInit - SD ver2.00
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd55 Card status error in response. MMC_STAT = 4000
SDInit: ACMD41 wait for power up bit timeout
g_cKeyCardSecurityLevel = FF
HTCEType (0x1)(Operation mode flag): cOpModeFlag=(0x0).
Type (0x2)(Back color flag): cBackColorShowFlag=(0x1).
Type (0x5)(Background color value): g_wBColor=(0xC618) (0xC0C0C0).
HTCST
Cmd>ruurun 0
Cmd>ResetDevice

I have flashed New_Blue_Touch_ROM_V4.0 to my device, and I've unlocked sim lock. After boot it always turned on and off the phone. and once I've turned it off, it reseted. but did nut start. after the T-mobile image, it turns black and does nothing. nothing helped.
In boot loader mode it does not comunicate with the computer, no connection with active sync. I can't flash any other roms.
please help.

[andrewloh]

I have flashed New_Blue_Touch_ROM_V4.0 to my device, and I've unlocked sim lock. After boot it always turned on and off the phone. and once I've turned it off, it reseted. but did nut start. after the T-mobile image, it turns black and does nothing. nothing helped.
In boot loader mode it does not comunicate with the computer, no connection with active sync. I can't flash any other roms.
please help.

In boot-loader mode, the WM6 device actually communicated with PC directly with the ROM flash program. activesync no connection is right. My experience in Vista I need to disable activesync before running the original ROM updater to flash my Touch in 3 colors mode.

[zergdefense]

In boot-loader mode, the WM6 device actually communicated with PC directly with the ROM flash program. activesync no connection is right. My experience in Vista I need to disable activesync before running the original ROM updater to flash my Touch in 3 colors mode.
I disabled activesinc, and tried this New_Blue_Touch_ROM_V4.0 to reinstall, but it needs activesync connection. should I try another rom?

[andrewloh]

I disabled activesinc, and tried this New_Blue_Touch_ROM_V4.0 to reinstall, but it needs activesync connection. should I try another rom?

In 3 colors mode, you have to flash using the original ROM and fully match to your device model and language.. everything... after you save your ROM to normal, you may flash other mod ROM again.


i feel so bad, seems my time was waste for someone did not read everything carefully before to try.

[Mr. Guy]

In 3 colors mode, you have to flash using the original ROM and fully match to your device model and language.. everything... after you save your ROM to normal, you may flash other mod ROM again.


i feel so bad, seems my time was waste for someone did not read everything carefully before to try.

Hi,

please read my post. I don';t know what the steps are after inserting the code in MTTY. Please help me? I would me really gratefull!

[andrewloh]

Hi,

please read my post. I don';t know what the steps are after inserting the code in MTTY. Please help me? I would me really gratefull!


mtty reset is to make your machine returning to normal booting if your device don't. so, suppose there is nothing to do after reset device in mtty console.

or if your device can't boot normally causing by failed flash, you have to then get your device into 3 colors mode and flashing an original ROM to rescue your device.

different senario get different approach, there is no single method. pls tell me your situation, people in this forum will try best to help, but suppose you guys should search and read posts here first. if you try every methods you can but still failed, we will try to help.

[Vanos]

I got the same problem here. The Touch starts normally and get stuck in the startscreen (Windows Mobile) every time I reset. After a reset and pressing the camera button i can flash the device (tricolor) until error massages like the "270" or "corrupt" come up.
My problem is now to find the "right" image, cause i bought it second hand in a french box with a german rom on it. But the original german an even the french rom won't work.
I also tried to boot from sd-micro, but I only get the tricolor and that's it.
I would also run the uspl, but there is no green activesync symbol.

Is there hope for my touch, cause I become a little desperate?

Thanks in advance

[Mr. Guy]

I got the same problem here. The Touch starts normally and get stuck in the startscreen (Windows Mobile) every time I reset. After a reset and pressing the camera button i can flash the device (tricolor) until error massages like the "270" or "corrupt" come up.
My problem is now to find the "right" image, cause i bought it second hand in a french box with a german rom on it. But the original german an even the french rom won't work.
I also tried to boot from sd-micro, but I only get the tricolor and that's it.
I would also run the uspl, but there is no green activesync symbol.

Is there hope for my touch, cause I become a little desperate?

Thanks in advance

Well same problem here indeed. I brought back my phone yesterday. Going to take 3weeks. Don't expect too much. If you would have the original ROM, maybe your touch will recover.

You can try flashing the DOPODASIA Rom, maybe it will work.....

good luck

[Mr. Guy]

mtty reset is to make your machine returning to normal booting if your device don't. so, suppose there is nothing to do after reset device in mtty console.

or if your device can't boot normally causing by failed flash, you have to then get your device into 3 colors mode and flashing an original ROM to rescue your device.

different senario get different approach, there is no single method. pls tell me your situation, people in this forum will try best to help, but suppose you guys should search and read posts here first. if you try every methods you can but still failed, we will try to help.

Hi Andrewloh,

thanks for your reaction. I'll tell you my situation.

I had the Blue Elfin Rom 2.01 installed. Undergoing several problems. Update the RadioROM, this worked after 5 times of flashing. After this still experiencing problems. Hardreset. Still problems. Reflashed device (something went wrong around here). Now can't flash any ROM from bootloader. Even a dumped original ROM for my t-mobile touch XL did not work.

Yesterday I returned my phone to the store. Hoping it will be repaired (hope warranty) Have to wait three weeks. (do you have experience with this, or heard any anything about the policy when returning phone?

Thought I was out of options.

Biggest problem is I can't get my phone CID unlocked. Thats why I need the Original. Or is there an other way to get the touch unlocked. Is the way by trying flashing with SD-card an option, think that one would be my last option.

Thanks so much already

[seckin38]

Friends,

My HTC Touch has been locked for two days and asking for password that I don't know because I didn't set any. Soft reset didn't work, hard reset didn't run. Removing the battery also didn't help. I doesn't shut down, receive calls but nothing else. No password I know worked.

I wanted to try flashing a ROM (shadow 1.1) but couldn't because the device is not accessable via USB or something else! Thus, i wanted to try "mtty" way but I couldn't go after the second step, there appears a message "USB is not reachable".

Thanks for any help in advance...

[japan1pondo]

I have the same question,and I try to use MTTY to recover my Elfin,but Ruu keep 0%,I want to know why

Cmd>password BsaD5SeoA
Pass.
+ SD Controller init
- SD Controller init
+StorageInit
SDInit+++
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDInit - SD ver1.0
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDInit: ACMD41 wait for power up bit timeout
+ SD Controller init
- SD Controller init
+StorageInit
SDInit+++
SDInit - SD ver2.00
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd55 Card status error in response. MMC_STAT = 4000
SDInit: ACMD41 wait for power up bit timeout
g_cKeyCardSecurityLevel = FF
HTCEType (0x1)(Operation mode flag): cOpModeFlag=(0x0).
Type (0x2)(Back color flag): cBackColorShowFlag=(0x1).
Type (0x5)(Background color value): g_wBColor=(0xC618) (0xC0C0C0).
HTCST
Cmd>ruurun 0 ---------RUU keep 0% here
Cmd>ResetDevice

[dtx]

Great info in this thread! My Rogers Elfin was FUBAR'd and I got it running thanks to all your advice!

[rocksteady]

[QUOTE=andrewloh;1695355]This is the tricolor RUU boot-loader:
http://www.ismodel.net/forum/richedit/upload/2kcf486c647d.jpg

1) Disable USB in your ActiveSync program.
http://www.ismodel.net/forum/richedit/upload/2k08f7e6a5b2.jpg

2) Download and run the mtty.exe (http://andrewloh.com/mtty.exe)

3) Change the port to "USB" & Flow control to "RTS/CTS"
http://www.ismodel.net/forum/richedit/upload/2k66e8168767.jpg

4) Press <Enter> once and you should able to see "Cmd>"

5) Issue the following command:
http://www.ismodel.net/forum/richedit/upload/2k3905d74812.jpg

[CODE]Cmd>password BsaD5SeoA
Pass.

You don't happen to know where to find the password for the 8125 to use this method?
Thanks Rocky

[omnislash]

my brother u just saved my ass from being kicked ... its a gift bought by me and my girl's hard earned money ... thanks a billion man .... I LOVE U bro .... :)

[lezink]

Very very very useful tips.

Thanks a million

[Midget_1990]

Thread Stuck

[Re-Mi]

Thread Stuck

thanks Midget :D

[Curare]

Thanks for the guide, andrewloh! You're well put together instructions saved my Touch!

[Curare]

BTW, do you know where I can get a 2.20.405.1B ROM? I've searched on these forums, but can't find it. If anyone can send me a link to the ROM, I would really appreciate it. Thanks.

[DAVI-GSM]

Hi to all...
I need RUSSIAN on my HTC TOUCH p3450.... wm6 pro..
can someone help for...
plz...
thanks... :)

[ITMASTER]

GO here and take that.
http://4pda.ru/forum/index.php?showtopic=44316&st=0#entry844460

[DAVI-GSM]

GO here and take that.
http://4pda.ru/forum/index.php?showtopic=44316&st=0#entry844460
Thank's.... ;)

[quiluno]

Hi people
I need Spanish rom on my HTC Touch Elfin.
Help me, please.
Thanks for all.

[DAVI-GSM]

then I think you have to try flash a original ROM suit your device in boot-loader.

i have
IPL 1.17 0002
SPL 1.17 0000
and this solution is not working....
????????
i get error 270
thank's...

[Re-Mi]

i have
IPL 1.17 0002
SPL 1.17 0000
and this solution is not working....
????????
i get error 270
thank's...

Try again some times it will takes more than 1 time. And keep the "connection program" open while flashing

Greetz,

[DAVI-GSM]

Try again some times it will takes more than 1 time. And keep the "connection program" open while flashing

Greetz,

i meen recovery....
not working and also update rom... any version i found here.. :(
how can i get original rom updater...?

[DAVI-GSM]

here is the log of mtty...
after reboot elf is in smart mobility screen..
Cmd>password BsaD5SeoA
Pass.

+ SD Controller init

- SD Controller init

+StorageInit

SDInit+++
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDInit - SD ver1.0
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
CMD55 failed
+ SD Controller init

- SD Controller init

+StorageInit

SDInit+++
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDInit - SD ver1.0
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
CMD55 failed
g_cKeyCardSecurityLevel = FF

HTCEType (0x1)(Operation mode flag): cOpModeFlag=(0x0).

Type (0x2)(Back color flag): cBackColorShowFlag=(0x1).

Type (0x5)(Background color value): g_wBColor=(0xC618) (0xC0C0C0).

HTCST
Cmd>ruurun 0

Cmd>ResetDevice
link of original rom plz...

[i017577]

Standard error
IPL 1.11.0002
SPL 1.11.0000
error 270
dosn't flash
What need to do, who can help?

Thanks a lot.
Alex.

[DAVI-GSM]

Standard error
IPL 1.11.0002
SPL 1.11.0000
error 270
dosn't flash
What need to do, who can help?

Thanks a lot.
Alex.

i know... i tryed all... but nothing....
we need an original rom dumped from another phone or oficial from htc wesite... but wesite is not giving nothing and on hte forum i could not find too...

[raymondw]

Unlocked my Touch today, no problem at all!
New sim in the unit, enter the code: no problemo!
Could call reboot etc etc, all oke.

Got new FW, updated Touch and all oke!
No problem! could call, browse the Net and tried a couple reboots.

With Sprite backup put al my contacts back, phone rebooted and...
Tri color screen :eek::eek:

Tried to reflash and HOURS of trying and waiting on downloads...

In my case it was a simple solution..... :D

PUSH BOTH call BUTTONS AND THE reset!!
PUSH THE MIDDLE BUTTON ON REQUEST, and your done...

For all the other people with upgrade plans on a lazy sunny Sunday afternoon:
Keep this in mind!

Guy's this is a real cool place to hang out!

[Delsu]

The versions showed in BL mode are IPL 1.13.0002 and SPL 1.13.0000
The phone is a German T-Mobile MDA Touch 128/64.
I downloaded an original dump version 1.13.111.4 GER I've found in the archive forum but I get allways the same error message (error 270).
I must add that when reading informations on the device, it doesn't find any previous image version ...
When I try mtty.exe, the password "BsaD5SeoA" is not recognised !?
Is there a special pw for each rom version ?
Is there an utility to read the pw ?
What have I to do ?
Thx for your answers.

[tifose]

i just want to say thank you guys flashing the phone with your correct room worked!!! i must say to all make sure you download all the rom and try till you get it back up and running:D

[erkansivas]

This is the tricolor RUU boot-loader:
http://www.ismodel.net/forum/richedit/upload/2kcf486c647d.jpg

1) Disable USB in your ActiveSync program.
http://www.ismodel.net/forum/richedit/upload/2k08f7e6a5b2.jpg

2) Download and run the mtty.exe (http://andrewloh.com/mtty.exe)

3) Change the port to "USB" & Flow control to "RTS/CTS"
http://www.ismodel.net/forum/richedit/upload/2k66e8168767.jpg

4) Press <Enter> once and you should able to see "Cmd>"

5) Issue the following command:
http://www.ismodel.net/forum/richedit/upload/2k3905d74812.jpg

Cmd>password BsaD5SeoA
Pass.
+ SD Controller init
- SD Controller init
+StorageInit
SDInit+++
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDInit - SD ver1.0
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDInit: ACMD41 wait for power up bit timeout
+ SD Controller init
- SD Controller init
+StorageInit
SDInit+++
SDInit - SD ver2.00
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd55 Card status error in response. MMC_STAT = 4000
SDInit: ACMD41 wait for power up bit timeout
g_cKeyCardSecurityLevel = FF
HTCEType (0x1)(Operation mode flag): cOpModeFlag=(0x0).
Type (0x2)(Back color flag): cBackColorShowFlag=(0x1).
Type (0x5)(Background color value): g_wBColor=(0xC618) (0xC0C0C0).
HTCST
Cmd>ruurun 0
Cmd>ResetDevice




Hello,
please help me.
my windows XP cant make a connection with my Touch in boot loader mode, so i cant run the mtty.

what do i have to do to resolve this bricke problem?????

[tennico]

4, Continue and let it goes through the process in your Touch and your PC.
http://www.ismodel.net/forum/richedit/upload/2kff196d09b2.jpg
http://www.ismodel.net/forum/richedit/upload/2k1d5671ae7d.jpg

5, Congratulations !
http://www.ismodel.net/forum/richedit/upload/2k8ae86e2df4.jpg

6, ROM version 2.20.707.1B is flashed to your HTC Touch.
http://www.ismodel.net/forum/richedit/upload/2k9d42b173a4.jpg

Hi all,
i have the same problem, but i need the original italian rom, because my touch is italian version.where i find the original italian rom??
Please help me
thanks a lot
tennico

[metalmickey]

my htc touch aint upgradin 2 any roms after i installed with the latest blue elves rom!!........after few minutes of upgradin the pc shows error in connection no matter wat i do.....help!!.................i am struck wit da latest blue elves rom which really suck big time.........wanna change 2 shadows......ive got da rom but it aint upgradin.....my mobile shows a black wit a penguin wen tryin 2 upgradin......iu guess dat file's cld harnet! or somethin like dat.........tried hard reset but nothin happens.........HELP...............:confused::conf used:

[pweingartz]

Hi Guys, I have a Black Touch Elf (STD, GSM) and have spent hours on this gr8 forum searching for solutions. The phone is dead and CID locked.

I can only access boot loader. I have tried flashing with SD only (1gb) but just get the Tri Color screen after a quick "accessing the SD card" message.

I am trying the MTTY.exe but the flash just hangs at 0%.

So I'm all out of Ideas. My Tri Color screen looks the same as the one in this thread (Same SPL/IPL) Correcton: My IPL/SPL is as follows.

IPL: 1.17.0002
SPL: 1.17.0000

Oh, I also tried extracting the .nbh from another rom to use with the SD card flashing because I read somewhere that you can use any rom with this method and not only the original rom. Any suggestions please?

[nik_for_you]

means there is no way you can flash ur device if you dont have original rom??

Its hell man..

there should b some work around?

[Phansteck]

I have also
IPL 1.11.0002
SPL 1.11.0000
error 270 --->> standard troubleshoot doesn't work for this
doesn't flash

What to do? The asia rom don't work.

[vices22]

What happens to this? :confused:

Cmd>password BsaD5SeoA
Pass.

+ SD Controller init

- SD Controller init

+StorageInit

SDInit+++
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDInit - SD ver1.0
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
CMD55 failed
+ SD Controller init

- SD Controller init

+StorageInit

SDInit+++
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDInit - SD ver1.0
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
CMD55 failed
g_cKeyCardSecurityLevel = FF

HTCEType (0x1)(Operation mode flag): cOpModeFlag=(0x0).

Type (0x2)(Back color flag): cBackColorShowFlag=(0x1).

Type (0x5)(Background color value): g_wBColor=(0xC618) (0xC0C0C0).

HTCST
Cmd>ruurun 0

Cmd>ResetDevice

[nik_for_you]

My device also not working.
I cant connect to activesync..

WWE rom not working..

also CHT rom not working..

any other way?

I dont understand this mtty stuff much .. after doing this it is just restarting and stucks at logo..

[nik_for_you]

Can anyone provide exat steps for mtty??
do i need to keep SD card inside fone?

[marinosa]

You guyz realy saved me. i thought i fried it this time.

[Jura_ZG]

I have also
IPL 1.11.0002
SPL 1.11.0000
error 270 --->> standard troubleshoot doesn't work for this
doesn't flash

What to do? The asia rom don't work.

I have "RUU_Elf_DOPODASIA_WWE_1.11.707.1B_4.1.13.42_02.93. 90_Ship.exe" Rom, do you want to try it with this ROM? I can upload it if you want?

[eucalli]

What happens to this? :confused:

Cmd>password BsaD5SeoA
Pass.

+ SD Controller init

- SD Controller init

+StorageInit

SDInit+++
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDInit - SD ver1.0
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
CMD55 failed
+ SD Controller init

- SD Controller init

+StorageInit

SDInit+++
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDInit - SD ver1.0
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
CMD55 failed
g_cKeyCardSecurityLevel = FF

HTCEType (0x1)(Operation mode flag): cOpModeFlag=(0x0).

Type (0x2)(Back color flag): cBackColorShowFlag=(0x1).

Type (0x5)(Background color value): g_wBColor=(0xC618) (0xC0C0C0).

HTCST
Cmd>ruurun 0

Cmd>ResetDevice

Tried above procedure, see my log:
------------------------------------
Cmd>password BsaD5SeoA
Pass.

+ SD Controller init

- SD Controller init

+StorageInit

SDInit+++
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDInit - SD ver1.0
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
CMD55 failed
g_cKeyCardSecurityLevel = 0

HTCEType (0x1)(Operation mode flag): cOpModeFlag=(0x0).

Type (0x2)(Back color flag): cBackColorShowFlag=(0x1).

Type (0x5)(Background color value): g_wBColor=(0xC618) (0xC0C0C0).

HTCST
Cmd>ruurun 0

Cmd>
------------------------------------
It looks different to me, shorter, something missing, something important...
After command Cmd>ruunrun 0, my unit opened on a white screen a "progress bar" - but this one remains on 0 percent and doesn't change.
Does anybody has a solution for this?
Thank you, EUCALLI

[vol123]

Tried above procedure, see my log:
------------------------------------
Cmd>password BsaD5SeoA
Pass.

+ SD Controller init

- SD Controller init

+StorageInit

SDInit+++
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDInit - SD ver1.0
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
CMD55 failed
g_cKeyCardSecurityLevel = 0

HTCEType (0x1)(Operation mode flag): cOpModeFlag=(0x0).

Type (0x2)(Back color flag): cBackColorShowFlag=(0x1).

Type (0x5)(Background color value): g_wBColor=(0xC618) (0xC0C0C0).

HTCST
Cmd>ruurun 0

Cmd>
------------------------------------
It looks different to me, shorter, something missing, something important...
After command Cmd>ruunrun 0, my unit opened on a white screen a "progress bar" - but this one remains on 0 percent and doesn't change.
Does anybody has a solution for this?
Thank you, EUCALLI

I have the same problems as you guys, tried mtty, tried more than 20 different rom's including the so-called original once. Also tried more than 10 rom's via the sd card method.

But looking at your device 1 thing seems different in mtty than me "g_cKeyCardSecurityLevel = 0" with me it says "g_cKeyCardSecurityLevel = FF". I think ..." = 0" means that the phone is cid unlocked and " ...= FF" means it is CID locked. So in your case it should mean you can upload customer ROM's since the device is unlocked. But I guess you tried a lot of rom's as well?

[Phansteck]

I have "RUU_Elf_DOPODASIA_WWE_1.11.707.1B_4.1.13.42_02.93. 90_Ship.exe" Rom, do you want to try it with this ROM? I can upload it if you want?

Yes would love to try that ROM. Mine touch is gathering dust right now and is just 3 months old.

[sergiy02@yandex.ru]

I start mtty for instruction? but do not any reaction for the my HTC Touch

....
Cmd>password BsaD5SeoA

Cmd>

....

Thet is all. Why?

[apljuc]

I start mtty for instruction? but do not any reaction for the my HTC Touch

....
Cmd>password BsaD5SeoA

Cmd>

....

Thet is all. Why?

I'm having the same problem...entering the password worked for me once, and I was able to reset my device and "RUU" appeared on the upper right hand corner of my screen while in bootloader. I tried downloading one ROM version; it didn't work; I went back into bootloader screen; tried mtty again; but now I get the same thing as sergiy02@yandex.ru. I've rebooted everything multiple times. Thoughts? Thanks!!


My specs:
T-Mobile MDA touch Germany 128mb with 1gb microsd
Settings after running pof's elf-uspl.exe (unfortunately with SD and sim card in originally; having tried multiple different ROMs with those cards removed and still always get error messages):
IPL 1.14.0002
SPL 1.14.0000

[Jura_ZG]

Yes would love to try that ROM. Mine touch is gathering dust right now and is just 3 months old.

here's the lik:
http://rapidshare.com/files/94543012/RUU_Elf_DOPODASIA_WWE_1.11.707.1B_4.1.13.42_02.93. 90_Ship.exe.html

Also I found more :
http://wiki.xda-developers.com/index.php?pagename=Elf_Upgrades

Try it out and report if it works.
Good luck.
Cheers.

[apljuc]

I'm having the same problem...entering the password worked for me once, and I was able to reset my device and "RUU" appeared on the upper right hand corner of my screen while in bootloader. I tried downloading one ROM version; it didn't work; I went back into bootloader screen; tried mtty again; but now I get the same thing as sergiy02@yandex.ru. I've rebooted everything multiple times. Thoughts? Thanks!!


My specs:
T-Mobile MDA touch Germany 128mb with 1gb microsd
Settings after running pof's elf-uspl.exe (unfortunately with SD and sim card in originally; having tried multiple different ROMs with those cards removed and still always get error messages):
IPL 1.14.0002
SPL 1.14.0000

Update - I was able to figure out how to get this to work. First, instead of copying and pasting the password, I manually typed it, and that worked. Second, I typed ruurun 1 instead of ruurun 0, and that made it reboot with RUU showing up in the bootloader screen. But - still - I can't download any of the ROMs! Any way to roll back the changes in IPL/SPL, or change them at all? Can't think of where else to go with this...Thanks...

[Phansteck]

here's the lik:
http://rapidshare.com/files/94543012/RUU_Elf_DOPODASIA_WWE_1.11.707.1B_4.1.13.42_02.93. 90_Ship.exe.html

Also I found more :
http://wiki.xda-developers.com/index.php?pagename=Elf_Upgrades

Try it out and report if it works.
Good luck.
Cheers.

Both ROMS didn't work after 3% it reboots. No t-mobile logo on screen anymore, i can only see smart mobility, it giver ERROR[244], INVALID MODEL ID.

[Jura_ZG]

Both ROMS didn't work after 3% it reboots. No t-mobile logo on screen anymore, i can only see smart mobility, it giver ERROR[244], INVALID MODEL ID.

What's your IPL/SPL in the bootloader?

[vol123]

What's your IPL/SPL in the bootloader?

I have the same problem and my info:

ELF0100
SPL 1.11.0000
IPL 1.11.0002

Uptill now I tried about 30 different ROM's including below:

ROM 1.11.405.1B WWE

ROM 1.11.707.1B WWE

ROM 1.17.707.2B WWE

ROM 1.15.721.3B WWE ASIA HK

ROM 1.17.707.2G WWE (WASABI GREEN)

ROM 1.14.710.2 AUS (EN)


Non of them are working. I get most of the time "Incorrect Vender ID" and sometimes "image corrupt" error.

Help?:(

[vol123]

YES! I am a little bit further, I now know what is on my elf:

=== NBHextract v1.0
=== Extract contents from HTC NBH files
=== (c)2007 xda-developers.com
=== by: pof & TheBlasphemer based on itsme perl scripts

Device: ELF010000
CID: DOPOD001
Version: 1.14.710.2
Language: USA
Extracting: 00_Unknown.nb
Extracting: 01_SPL.nb
Extracting: 02_MainSplash.nb
Encoding: 02_MainSplash.bmp
Extracting: 03_ExtROM.nb
Extracting: 04_GSM.nb
Extracting: 05_OS.nb

Now trying to find a good ROM, anyone an ID how to get my elf back working?

(the only thing it does is hang in "smart mobility" screen or I can boot into bootloader, that is all.

[CyZeeK]

This is the tricolor RUU boot-loader:
http://www.ismodel.net/forum/richedit/upload/2kcf486c647d.jpg

Cmd>password BsaD5SeoA
Pass.
+ SD Controller init
- SD Controller init
+StorageInit
SDInit+++
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDInit - SD ver1.0
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDInit: ACMD41 wait for power up bit timeout
+ SD Controller init
- SD Controller init
+StorageInit
SDInit+++
SDInit - SD ver2.00
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd55 Card status error in response. MMC_STAT = 4000
SDInit: ACMD41 wait for power up bit timeout
g_cKeyCardSecurityLevel = FF
HTCEType (0x1)(Operation mode flag): cOpModeFlag=(0x0).
Type (0x2)(Back color flag): cBackColorShowFlag=(0x1).
Type (0x5)(Background color value): g_wBColor=(0xC618) (0xC0C0C0).
HTCST
Cmd>ruurun 0
Cmd>ResetDevice


here is the log of mtty...
after reboot elf is in smart mobility screen..
Cmd>password BsaD5SeoA
Pass.

+ SD Controller init

- SD Controller init

+StorageInit

SDInit+++
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDInit - SD ver1.0
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
CMD55 failed
+ SD Controller init

- SD Controller init

+StorageInit

SDInit+++
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDInit - SD ver1.0
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
CMD55 failed
g_cKeyCardSecurityLevel = FF

HTCEType (0x1)(Operation mode flag): cOpModeFlag=(0x0).

Type (0x2)(Back color flag): cBackColorShowFlag=(0x1).

Type (0x5)(Background color value): g_wBColor=(0xC618) (0xC0C0C0).

HTCST
Cmd>ruurun 0

Cmd>ResetDevice
link of original rom plz...

I found a difference here... may be is the reason to be stucked.

Anyone? comments?

[Jura_ZG]

I have the same problem and my info:

ELF0100
SPL 1.11.0000
IPL 1.11.0002

Uptill now I tried about 30 different ROM's including below:

ROM 1.11.405.1B WWE

ROM 1.11.707.1B WWE

ROM 1.17.707.2B WWE

ROM 1.15.721.3B WWE ASIA HK

ROM 1.17.707.2G WWE (WASABI GREEN)

ROM 1.14.710.2 AUS (EN)


Non of them are working. I get most of the time "Incorrect Vender ID" and sometimes "image corrupt" error.

Help?:(


Did you remove your sd card befor flashing? If not you should.
I really can't tell. Those 1.11. ROM's should work as far as I know.
The problem might be frequent flashing with different rom's.
Did you try flashing from sd card?
Extract .nbh file from 1.11 rom and do as described here:
http://wiki.xda-developers.com/index.php?pagename=Elf_SD_Card_Flashing

[Phansteck]

What's your IPL/SPL in the bootloader?

My IPL/SPl are
IPL: 1.17.0002
SPL: 1.17.0000

Trying one more ROM. I'm now going to try ROM 1.17.707.2B WWE. I hope this will work.

[vjnrt]

Hello to you all,

I'm desperately in need of some help!
My Touch (Elf) is stuck in the 'smart mobility' screen.
I can it get running in the tri-color bootloader screen with USB connection but without 'RUU' in the upper left corner.
I have tried all ROMs I could find in this thread, but all failed.
I also tried booting from my SD card, but also without any luck.

When I tried MTTY, this is what I got:


Cmd>password BsaD5SeoA
Pass.

+ SD Controller init

- SD Controller init

+StorageInit

SDInit+++
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDInit - SD ver1.0
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SD clock to 24MHz
***** user area size = 0x78980000 Bytes

SDInit---
SDInit OK

g_cKeyCardSecurityLevel = FF

HTCEType (0x1)(Operation mode flag): cOpModeFlag=(0x0).

Type (0x2)(Back color flag): cBackColorShowFlag=(0x1).

Type (0x5)(Background color value): g_wBColor=(0xC618) (0xC0C0C0).

HTCST
Cmd>ruurun 0

Cmd>ResetDevice


Can someone advice me or send me an original Dutch or WWE ROM?
IPL is 1.11.0002
SPL is 1.11.0000

Thanks in advance!

[Piranha1]

help pleace
link of original rom plz...

My mtty screen
--------------------------------------------------------------------------
Cmd>password BsaD5SeoA
Pass.

+ SD Controller init

- SD Controller init

+StorageInit

SDInit+++
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDInit - SD ver1.0
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
CMD55 failed -------------------- is this my Prob?
+ SD Controller init

- SD Controller init

+StorageInit

SDInit+++
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDInit - SD ver1.0
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
CMD55 failed
g_cKeyCardSecurityLevel = FF

HTCEType (0x1)(Operation mode flag): cOpModeFlag=(0x0).

Type (0x2)(Back color flag): cBackColorShowFlag=(0x1).

Type (0x5)(Background color value): g_wBColor=(0xC618) (0xC0C0C0).

HTCST
Cmd>ruurun 0

Cmd>
--------------------------------------------------------------------------
and loader version:IPL 2.21.0002
SPL 2.21.0000

[sergiy02@yandex.ru]

I Try this ROM

RUU_Elf_DOPOD_AU_1.14.710.2_4.1.13.46_02.97.90_BLU E_Ship.exe
RUU_Elf_DOPODASIA_WWE_1.11.707.1B_4.1.13.42_02.93. 90_Ship.exe
RUU_Elf_DOPODASIA_WWE_1.17.707.2B_4.1.13.46_02.97. 90_BLUE_Ship.exe
RUU_Elf_DOPODASIA_WWE_1.17.707.2G_4.1.13.46_02.97. 90_GREEN_Ship.exe
RUU_Elf_HTC_WWE_1.11.405.1B_4.1.13.42_02.93.90_Shi p.exe
RUU_Elfin_DOPODASIA_WWE_2.20.707.1B_4.1.13.51_03.0 7.90_BLUE_Ship_Reduced.exe
RUU_Elfin_DOPODASIA_WWE_2.20.707.1G_4.1.13.51_03.0 7.90_GREEN_Ship_Reduced.exe
RUU_Elfin_DOPODASIA_WWE_2.20.707.1R_4.1.13.51_03.0 7.90_RED_Ship_Reduced.exe
RUU_Elf_DOPOD_AU_1.14.710.2_4.1.13.46_02.97.90_BLU E_Ship.exe
RUU_Elf_HTC_ARA_1.17.415.3B_4.1.13.47_02.98.90_BLU E_Ship.exe

but no one do not workins, Error 244, phone was bying in New-York, must be WWE ROm, but not working no one. May be anybody tell me other originale ROM? Or my phone will be deadphone?

[sergiy02@yandex.ru]

+StorageInit

SDInit+++
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDInit - SD ver1.0
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
CMD55 failed
+ SD Controller init

- SD Controller init

+StorageInit

SDInit+++
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDInit - SD ver1.0
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
CMD55 failed
g_cKeyCardSecurityLevel = FF

HTCEType (0x1)(Operation mode flag): cOpModeFlag=(0x0).

Type (0x2)(Back color flag): cBackColorShowFlag=(0x1).

Type (0x5)(Background color value): g_wBColor=(0xC618) (0xC0C0C0).

HTCST

[CyZeeK]

CMD55 failed


I got that when SD card was not empty (just ROM file inside) or is not format compatible. Has to be FAT32 (im trying different Cluster Size for better compatibility, formatting in an other device with POCKET MECHANIC)

Could be other reason, but for me was that.

Anyway still i cant do a success flash, after type ResetDevice, touch shows "SmartMobility" then turns off.

WHAT'S WRONG!!! i was trying Chinesse, Russian etc.. many kind original ELFIN roms and nothing. :confused:

Somebody help plz!!! :rolleyes:

[paramjeitmarwah]

This is the tricolor RUU boot-loader:
http://www.ismodel.net/forum/richedit/upload/2kcf486c647d.jpg

1) Disable USB in your ActiveSync program.
http://www.ismodel.net/forum/richedit/upload/2k08f7e6a5b2.jpg

2) Download and run the mtty.exe (http://andrewloh.com/mtty.exe)

3) Change the port to "USB" & Flow control to "RTS/CTS"
http://www.ismodel.net/forum/richedit/upload/2k66e8168767.jpg

4) Press <Enter> once and you should able to see "Cmd>"

5) Issue the following command:
http://www.ismodel.net/forum/richedit/upload/2k3905d74812.jpg

Cmd>password BsaD5SeoA
Pass.
+ SD Controller init
- SD Controller init
+StorageInit
SDInit+++
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDInit - SD ver1.0
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDInit: ACMD41 wait for power up bit timeout
+ SD Controller init
- SD Controller init
+StorageInit
SDInit+++
SDInit - SD ver2.00
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd55 Card status error in response. MMC_STAT = 4000
SDInit: ACMD41 wait for power up bit timeout
g_cKeyCardSecurityLevel = FF
HTCEType (0x1)(Operation mode flag): cOpModeFlag=(0x0).
Type (0x2)(Back color flag): cBackColorShowFlag=(0x1).
Type (0x5)(Background color value): g_wBColor=(0xC618) (0xC0C0C0).
HTCST
Cmd>ruurun 0
Cmd>ResetDevice

Hi Andrew,

Was upgrading my HTC Touch from Blue V4.0 to Blue Elves V5.0 . Did so successfully. worked great for some time but the mobile network signals weren't coming so I pressed the ON/OFF button. After that I am stuck !! The phone goes blank after showing the 'Smart Mobility' message. On pressing the camera button, I get the tricolour page showing IPL 2.02.0002 and SPL 1.11.000.

Downloaded and ran MTTY and input as you said.

The device resets after DeviceReset command but same status.
Can you guide me how to proceed from here. Anyone have a link to the OEM ROM for HTC Elf 64/128 ROM 2.20.720.2B wwe Dt 2/10/2007 Radio 03.07.90 Protocol 4.1.13.51 Ext ROM 2.20.720.103 ? Even then , how to start the download ?

thanx
Param

[paramjeitmarwah]

Thanks andrewloh and everyone who has written in. have solved the problem using MTTY and flashing 2.20.707.1Bwwe ELFin ROM from somewhere on the site.

Guys if you are stuck like I was, get a copy of the original ROM that was on the device, run MTTY as per andrew's instructions , reboot and flash the original ROM. magically, the Elf will start booting . Then, after the panic dies, take a deep breath and re-flash the ROM of your choice.

thanks all
Param

[phil.lucas]

Thanks andrewloh and everyone who has written in. have solved the problem using MTTY and flashing 2.20.707.1Bwwe ELFin ROM from somewhere on the site.

Guys if you are stuck like I was, get a copy of the original ROM that was on the device, run MTTY as per andrew's instructions , reboot and flash the original ROM. magically, the Elf will start booting . Then, after the panic dies, take a deep breath and re-flash the ROM of your choice.

thanks all
Param

glad your phone worked, but i'm still having problems.

while i wait for my overwhelmingly slow internet to download an original ROM for my elfin, i'm trying to solve the problem using the MTTY. but even there i have trouble.
after setting everything up like (i think) i am supposed to, i press ok (or tap enter, or space) and mtty gives me an error message "USB port can not open"
and goes blank.

i've tried another "unbricking" method, using splxploit-windows, as i found in another thread, and the error is similar.
although splxploit is not as user friendly as mtty i.e. no graphics, it seems to do the same thing. there's a line that says the program can't find "\\.\WCEUSBSH001" which is the same USB adress we can see on the printscreen from mtty in the first post.

i think that means my elfin doesn't have that wce or whatever in it, but i really really really hope i'm wrong.

oh, almost forgot, i'm using vista, so the settings are not exactly the same, and the driver for the pda is different (i think)


please someone enlighten me.
i have a pc with xp if thats what it takes.
but please oh please help, my father is gonna kill me if he finds out i bricked my brand new elfin (got it 2 days ago :()



thanks in advance

[heartsurfer008]

mY CeLL DOsEnT sHoW aNy ROM!!!!!:confused:

I HAv a HTC Touch....:)

Please tell me what to do.....:o

mY CeLL iS nOt At All StARtIn!!!!!!!!!!!!!!:eek:

[vivaroyal]

I was trying to change my pagepool and when I tried to dump back the edited image to my htc touch (elfin champagne color) phone froze.then I reset the device and it got stuck on the smart mobility screen.

I tried this method (mtty.exe) when I'm in bootloader mode .works great in terms of the output on the PC screen.but device is stuck @ 0% and deas not go further.and when I cmd>resetdevice, device
restarts but again gets stuck on smart mobility.

by the way my IPL 2.20.0002 and SPL 2.20.0000

I tried many original roms and I would get error 240(invalid vendor ID).

I also tried "Elf SD Card flashing"
http://wiki.xda-developers.com/index.php?pagename=Elf_SD_Card_Flashing,
once I try to get in to bootloader it says checking contents of SD card and then goes to tri color bootloader showing above mentioned IPL and SPL(also did format SD to fat32)

how do you think I can bypass vendor ID check?
or any other solutions?

thanks in advance

[vincent_nsw]

Hi Guys, my touch only load the ROM logo and turns off by itself after that. When running mtty, getting a slightly diff result as below:

[CyZeeK]

Hi Guys, my touch only load the ROM logo and turns off by itself after that. When running mtty, getting a slightly diff result as below:


CMD55 failed


I got that when SD card is not inserted or was not empty (just ROM file inside) or is not format compatible. Has to be FAT32 (im trying different Cluster Size for better compatibility, formatting in an other device with POCKET MECHANIC)

Could be other reason, but for me was that.

Anyway still i cant do a success flash, after type ResetDevice, touch shows "SmartMobility" then turns off.

WHAT'S WRONG!!! i was trying Chinesse, Russian etc.. many kind original ELFIN roms and nothing. :confused:

Somebody help plz!!! :rolleyes:


I hope it help u.

[phil.lucas]

glad your phone worked, but i'm still having problems.

while i wait for my overwhelmingly slow internet to download an original ROM for my elfin, i'm trying to solve the problem using the MTTY. but even there i have trouble.
after setting everything up like (i think) i am supposed to, i press ok (or tap enter, or space) and mtty gives me an error message "USB port can not open"
and goes blank.

i've tried another "unbricking" method, using splxploit-windows, as i found in another thread, and the error is similar.
although splxploit is not as user friendly as mtty i.e. no graphics, it seems to do the same thing. there's a line that says the program can't find "\\.\WCEUSBSH001" which is the same USB adress we can see on the printscreen from mtty in the first post.

i think that means my elfin doesn't have that wce or whatever in it, but i really really really hope i'm wrong.

oh, almost forgot, i'm using vista, so the settings are not exactly the same, and the driver for the pda is different (i think)


please someone enlighten me.
i have a pc with xp if thats what it takes.
but please oh please help, my father is gonna kill me if he finds out i bricked my brand new elfin (got it 2 days ago :()



thanks in advance

pleeeeeeease help

[Wealie]

PLEASE HELP HAVING SAME PROBLEM AS ABOVE CANT GET OUT OF BOOTLOADER I HAVE A FRENCH TOUCH XL ORIGNAL ROM 2.20.852.1FRE; i THINK I NEED TO REFLASH WITH A ROM THE SAME AS THIS CAN ANYBODY TELL ME WHERE I CAN FIN AN ORIGINAL FRENCH ROM MY GIRLIE IS OING TO KILL ME IF SHE FINDS OUT I HAVE KILLED MY BIRTHDAY PRESENT WITHIN 10 HOURS OF GETTING IT
THANX

[CyZeeK]

PLEASE HELP HAVING SAME PROBLEM AS ABOVE CANT GET OUT OF BOOTLOADER I HAVE A FRENCH TOUCH XL ORIGNAL ROM 2.20.852.1FRE; i THINK I NEED TO REFLASH WITH A ROM THE SAME AS THIS CAN ANYBODY TELL ME WHERE I CAN FIN AN ORIGINAL FRENCH ROM MY GIRLIE IS OING TO KILL ME IF SHE FINDS OUT I HAVE KILLED MY BIRTHDAY PRESENT WITHIN 10 HOURS OF GETTING IT
THANX

Did u registered ur product at HTC Club? HERE (http://member.htc.com/member/login.aspx), may be u can get an original ROM from there, if u can please tell us.

[vincent_nsw]

Thank you CyZeeK for the help. Format my SD in FAT32 and now getting a new message, which just look different from what is out there ... :confused:

[CyZeeK]

Thank you CyZeeK for the help. Format my SD in FAT32 and now getting a new message, which just look different from what is out there ... :confused:

i saw that ur device is CID UNLOCKED, in theory u can flash any rom.

Good luck!

[vincent_nsw]

i saw that ur device is CID UNLOCKED, in theory u can flash any rom.

Good luck!

Yes, I did run the CID unlocker and I found 3 ROMs I can flush with. However, after the ROM logo, my touch just turns off by itself regardless which ROM I am using, I really dont understand why, please someone enlighten me of what need to be done to bring my touch back ... :(

[Wealie]

Ok I took my last touch back to the shop after the stuck in bootloader mode and somehow convinced them in very broken french that the phone was dead when i bought it, and they exchanged it. Unfortunately i now have the original problem of it is all in French and i dont speak a word of it Can someone please point me in the right direction for a stable wwe rom my system is a follows:-

elf 0200 Ted baker Purple colour
rom: 2.20.852.1FRE
rom date: 10.02.2007
radio: 03.07.90
Protocol: 4.1.13.51
Ext-Rom: 2.20.852.101
processor: omap850
Total memory 128
flash mem 256
ce: 5.2.1620 (build 18125.0.4.2)

I really dont think that i will get away with exchanging another so i have to get it right this time please help
Thanx

[tretts88]

i have a problem ...when i open the mtty, it says that the port usb can't be open and i don't know why ...do you know how to resolve this problem ???
thanks a lot

[CyZeeK]

i have a problem ...when i open the mtty, it says that the port usb can't be open and i don't know why ...do you know how to resolve this problem ???
thanks a lot

What is ur OS (XP, Vista , etc . ) ?

[vincent_nsw]

Hi all, try to recover my dead touch but just cant get the same output ... :confused:

[CyZeeK]

Hi all, try to recover my dead touch but just cant get the same output ... :confused:

It looks like your device is CID UNLOCKED, so have u try to run an original RUU update from windows?

Put ur device in bootloader mode, connect to USB, USB sign most appear at the left bottom of ur device. Then run any of this original updates.

SEE THIS LINK (http://wiki.xda-developers.com/index.php?pagename=Elf_Upgrades)

Good luck!!!

[phil.lucas]

What is ur OS (XP, Vista , etc . ) ?

i have the same problem as him, and my OS is vista.
you think that is the source of the problem?

[CyZeeK]

i have the same problem as him, and my OS is vista.
you think that is the source of the problem?

Ok, try this it works to me on Vista.

Read this:

http://forum.xda-developers.com/showthread.php?t=291723

[marsdaddy]

Hi there - I'm trying to recover an Elf that switches off from the "Smart Mobility" screen. I can get it into the tri-colour boo't loader but no ROMS will flash to it, mainly because it gets '244' or '270' errors. The IPL is 1.11.0002 and the SPL is 1.11.0000.

I cannot get the rapi or cert_sps on the phone obviously and I guess the problem is the phone is looking for a specific vendor/model in the ROM.

My question is, is there a tool which will tell me what model/rom/vendor the bootloader needs? I've used mtty but can't see anything there. This would save a lot of time over downloading ROMs and failing to flash them... :)

[CyZeeK]

Hi there - I'm trying to recover an Elf that switches off from the "Smart Mobility" screen. I can get it into the tri-colour boo't loader but no ROMS will flash to it, mainly because it gets '244' or '270' errors. The IPL is 1.11.0002 and the SPL is 1.11.0000.

I cannot get the rapi or cert_sps on the phone obviously and I guess the problem is the phone is looking for a specific vendor/model in the ROM.

My question is, is there a tool which will tell me what model/rom/vendor the bootloader needs? I've used mtty but can't see anything there. This would save a lot of time over downloading ROMs and failing to flash them... :)

Read here:

http://forum.xda-developers.com/showthread.php?t=372809

I hope it help u.

[marsdaddy]

Read here:

http://forum.xda-developers.com/showthread.php?t=372809

I hope it help u.

Many thanks CyZeeK - I managed to get the following...

ELF030050

and

T-MOB005

I hope this will now help me to find the correct rom... :)

[jacobstim78]

Is there anybody ho can help me. I have done anything i could find an i can't get my touch back to work. I tried several rom's bevore and when i tried flashing the last time something when't wrong. He booted again after reached 30%. An now i have only bootloader. Tried mtty. an i searcht for the original rom. But that didn't work also.
Regular touch
ipl 1.14.0002
spl 2.26.0000
Languach is dutch from orange

Already tried the originalrom from wiki page and i get invalid certificate when i flashed from sd when i flash from Pc i get error 270.

Whit mtty i get a screen on my touch same as when you start flashing and it stays at 0%

thanks and sorry for my english

[CyZeeK]

Is there anybody ho can help me. I have done anything i could find an i can't get my touch back to work. I tried several rom's bevore and when i tried flashing the last time something when't wrong. He booted again after reached 30%. An now i have only bootloader. Tried mtty. an i searcht for the original rom. But that didn't work also.
Regular touch
ipl 1.14.0002
spl 2.26.0000
Languach is dutch from orange

Already tried the originalrom from wiki page and i get invalid certificate when i flashed from sd when i flash from Pc i get error 270.

Whit mtty i get a screen on my touch same as when you start flashing and it stays at 0%

thanks and sorry for my english

Plz post ur MODEL ID and CID ID, that could help to get ur correct ROM update, like "marsdaddy" did.

Good Luck

[marsdaddy]

Plz post ur MODEL ID and CID ID, that could help to get ur correct ROM update, like "marsdaddy" did.

Good Luck

Yes, good luck - but remember, a dumped rom which has been repackaged will still give "270" errors if your phone still checks the certificate. I've had the correct ROM for my phone as CyZeeK says, but I can't flash it. Anyone want to buy a brick??

[Donbegles]

I have been through several homebrew romssince I got this phone, including two retail 2 original ones. Most recently Surface than Shadow 2.0 . I was trying to upgrade to Shadow 2.1 but it keeps erroring out that it can't communicate with my device once the install actually starts occuring every time I try to CID unlock. I even tried getting a factory ROM same error. I tried 2 cables and 3 PC's. I have recovered the tricolor screen more time than I want to admit tonight. I have the soft black elf original specs. Any ideas would be appreciated. Thanks in Advance..

[chrguillen]

Hi, I have the same problem. I have already done the mtty no longer works. Please help me. best regards.

hola, tengo el mismo problema. ya he hecho lo del mtty ya no funciona. por favor ayudarme. un saludo.

IPL 1.11.0002
SPL 2.28.0000

HTC ELF0100 Vodafone Spain. SIM Unlocked.

[CyZeeK]

Hi, I have the same problem. I have already done the mtty no longer works. Please help me. best regards.

hola, tengo el mismo problema. ya he hecho lo del mtty ya no funciona. por favor ayudarme. un saludo.

IPL 1.11.0002
SPL 2.28.0000

HTC ELF0100 Vodafone Spain. SIM Unlocked.

As i could see ur device "IS NOT CID UNLOCKED" check this line to be clear:

g_cKeyCardSecurityLevel = FF ------- MEANS NOT CID UNLOCKED

g_cKeyCardSecurityLevel = 0 --------- MEANS CID UNLOCKED



Try to get ur MODEL ID and your CID ID spoofing USB port.

this thread culd help u to do so ------> READ HERE (http://forum.xda-developers.com/showpost.php?p=1973811&postcount=3)


SUERTE! AHH Y POR FAVOR POSTEA TUS RESULTADOS. GRACIAS.

[chrguillen]

Here are the data:

45 4C 46 30 31 30 30 30 30 00 00 00 00 00 00 00 ELF010000.......
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
56 4F 44 41 50 33 30 34 00 00 00 00 00 00 00 00 VODAP304........
00 00 00 00 0

que debo hacer ahora. muchas gracias por tu ayuda.

What can I do now?. Many thanks for your help.

[CyZeeK]

Here are the data:

45 4C 46 30 31 30 30 30 30 00 00 00 00 00 00 00 ELF010000.......
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
56 4F 44 41 50 33 30 34 00 00 00 00 00 00 00 00 VODAP304........
00 00 00 00 0

que debo hacer ahora. muchas gracias por tu ayuda.

What can I do now?. Many thanks for your help.

Ok try this backup from a VODAFONE ROM ------> DOWNLOAD HERE (http://rapidshare.com/files/90000017/Touch_XL_Vodafone_2.20.164.2_con_Ext-ROM_y_BigStorage.rar)

[chrguillen]

Nothing. ROMUpdateUtility.exe began to run. But gives 270 error in the 2%

nada. al ejecutar el ROMUpdateUtility.exe inicia. pero da error al 270 en el 2%

this model have 64Mb RAM, 128Mb ROM.

[imatecyprus]

thank you guys for your help. i just manage to recover my ELFin following your instructions and using official HTC's rom 2.20 wwe.

i am going to finished in a few days my ftp server with no security bullshits on it and i will upload all i-mates and htc's official rom's wwe in order to help those guys which need such help.
what i did was to type password BsaD5SeoA and hit enter in the mtty console.
if the SDInit - SD ver2.00 is like this that mean you have succeted, if it fails then you have to format your storage card with fat32.

keep up the good work.:D

for those who didn't manage to succeed yet don't give up. just try to read the other's post's before do something which you are going to regred after.

[chrguillen]

alguien puede ayudarme por favor ??


anybody can helpme please ???

[CyZeeK]

Nothing. ROMUpdateUtility.exe began to run. But gives 270 error in the 2%

nada. al ejecutar el ROMUpdateUtility.exe inicia. pero da error al 270 en el 2%

this model have 64Mb RAM, 128Mb ROM.

Sorry to hear that but ... that is what i found here ----> TODOPDAS (http://todopdas.es/showpost.php?p=51846&postcount=1)

[CyZeeK]

thank you guys for your help. i just manage to recover my ELFin following your instructions and using official HTC's rom 2.20 wwe.

i am going to finished in a few days my ftp server with no security bullshits on it and i will upload all i-mates and htc's official rom's wwe in order to help those guys which need such help.
what i did was to type password BsaD5SeoA and hit enter in the mtty console.
if the SDInit - SD ver2.00 is like this that mean you have succeted, if it fails then you have to format your storage card with fat32.

keep up the good work.:D

for those who didn't manage to succeed yet don't give up. just try to read the other's post's before do something which you are going to regred after.

Gr8 man!!!, its nice to hear that some gets back his device, that encourage me to follow finding a solution to my device.

[palermo123]

sorry for crossposting

http://forum.xda-developers.com/showthread.php?t=379201

, but

what rom is the original rom for my touch if my spl and ipl are IPL 2.20.0002
SPL 2.20.0000


or do that numbers not giving a hint?
the question here...:)

feeling nOOb here ;)

[chrguillen]

alguien tiene la rom original para la touch vodafone españa ??

anybody have the original rom for htc touch vodafone spain ?

[dimushor]

thank you guys for your help. i just manage to recover my ELFin following your instructions and using official HTC's rom 2.20 wwe.

i am going to finished in a few days my ftp server with no security bullshits on it and i will upload all i-mates and htc's official rom's wwe in order to help those guys which need such help.
what i did was to type password BsaD5SeoA and hit enter in the mtty console.
if the SDInit - SD ver2.00 is like this that mean you have succeted, if it fails then you have to format your storage card with fat32.

keep up the good work.:D

for those who didn't manage to succeed yet don't give up. just try to read the other's post's before do something which you are going to regred after.

i have SDInit - SD ver2.00 , but i still cannot do anything. so this is not true

[CyZeeK]

i have SDInit - SD ver2.00 , but i still cannot do anything. so this is not true

Could be true if the device is SUPERCID or the ROM match with the DEVICE ID and CID ID.

Take a look here....Elf/Elfin Original Roms Model Id & Cid Id List (http://forum.xda-developers.com/showthread.php?t=379034)

[despe73]

hello

for me

cid : orange202
010050

please help me my phone is brick flash stop 2%

thanks

[canadian student]

Hi there i'm stuck in the bootloader screen, i've done eveerything right (i believe), but when i type "runrun 0" it says error, what am i doing wrong?

I have Rogers Touch, upgraded to blue WM6.1
IPL 2.21.0002
SPL 2.28.0000
Please and thank you

[marsdaddy]

Hi there i'm stuck in the bootloader screen, i've done eveerything right (i believe), but when i type "runrun 0" it says error, what am i doing wrong?

I have Rogers Touch, upgraded to blue WM6.1
IPL 2.21.0002
SPL 2.28.0000
Please and thank you

Check your typing - I think it's "ruurun"

[canadian student]

Thank you, but it just resets back to the tri color screen. Which ROM would work best? Cause the ones that i try i keep getting error message (270)

Thanks

[leondaphillips]

Thank you, but it just resets back to the tri color screen. Which ROM would work best? Cause the ones that i try i keep getting error message (270)
Thanks

Hi canadian student
The link you need is below.
http://forum.xda-developers.com/showthread.php?t=379034

Get your Device ID and CID then follow the thread to find the right ROM for you and if not available post again.
Yours
Leon

[canadian student]

^ Thank you i will give it a try.

[bugarrun]

what a fantastic forum. Managed to get my HTC Touch (ELF) working again thanks to all who posted in this thread. :)

[fire00]

Another one having this problem and I'm very desperate!!! :-(

using TTY I got following deviceinfo:

HTCSELF010050gUH¥HTCE

using Bootloader I get the following:

IPL: 1.11.0002
SPL: 1.11.0000

From TTY the whole report is attached as screenshot.

From "FF" I guess it is locked. I tried to unlock using SPL but I only get the black CMD windows, hit enter to start but with 1st step it doesn't move forward.

Device was bought in the Czech Republic.

Please please help me on that!
thx! fire00

[fire00]

I know what to do: Flash with an original ROM. To do that I need to know how to:

1) CID unlock from the Bootloader - USPL_unlock is not working
2) Flash original ROM - Where to find it?

Please help me folks!

[Kvaga_Records]

Sorry 4 crossposting but i really need original Tmobile GERMANY ROM :mad::mad:

ELF030050
T-MOB101 (GERMANY)

2.81.111.1 08/29/07 or any version ...

[leondaphillips]

I know what to do: Flash with an original ROM. To do that I need to know how to:
1) CID unlock from the Bootloader - USPL_unlock is not working
2) Flash original ROM - Where to find it?
Please help me folks!

Hi Fire00
Have you seen this thread yet?
http://forum.xda-developers.com/showthread.php?t=379034
Both CyZeek and myself have spent a little time getting a straight forward answer to extracting plain text device ID and CID's here:

Mine: http://forum.xda-developers.com/showpost.php?p=2051659&postcount=1

CyZeek's: http://forum.xda-developers.com/showthread.php?t=379318

When you ran GetDevInfo you got:
"HTCSELF010050gUH¥HTCE"

If you capture the packets between your pc and the device when you run that command and then de-hex them you should get something like this:


45 4C 46 30 33 30 30 35 30 00 00 00 00 00 00 00 ELF030050.......
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
54 2D 4D 4F 42 30 30 35 00 00 00 00 00 00 00 00 T-MOB005........
00 00 00 00 00 00 00 00 00 00 00 00 00 00 -- -- ..............

If you have extracted your CID and Device ID and the ROM isn't in the list for the post above there is a possibility that someone like Olipro could write you a handset/device specific custom hard SPL / CID Unlock to get you working agan.

Hope that helps
Yours
Leon

[fire00]

leondaphillips you and you all are great here in this forum! you don't have to help but you do!

ok I got the CID and Device ID:

ELF010050
HTC__001

I do not find any ROM's which would match that IDs...or I have to ask, how to identify them?

Olipro - could you do me a favor and get me one specific ROM so I can play again and save my sunday?

[vadimychbxl]

Have same problem. HTC 3450 touch. Device stucked after flashing a new ROM. only tricolor i have. Q is where and how can i find the original ROM for my device? I have a backup and recovery CD in my box, but all those are .exe files that works on PC and i think need active sync connection. Does anyone have any ideas?

[leondaphillips]

Another one having this problem and I'm very desperate!!! :-(

using TTY I got following deviceinfo:

HTCSELF010050gUH¥HTCE

using Bootloader I get the following:

IPL: 1.11.0002
SPL: 1.11.0000

From TTY the whole report is attached as screenshot.

From "FF" I guess it is locked. I tried to unlock using SPL but I only get the black CMD windows, hit enter to start but with 1st step it doesn't move forward.

Device was bought in the Czech Republic.

Please please help me on that!
thx! fire00
Hi
Check your settings are 8 one and none on MTTY
That would explain why you're not able to issue commands
Yours
Leon

[konradw7]

Hi my htc stick on screen "SMART MOBILITY". I can get to the bootloader and there is "IPL 2.20.0002" "SPL 1.11.0000".
In MTTY:
Cmd>password BsaD5SeoA
Pass.

+ SD Controller init

- SD Controller init

+StorageInit

SDInit+++
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDInit - SD ver1.0
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
CMD55 failed
g_cKeyCardSecurityLevel = 0

HTCEType (0x1)(Operation mode flag): cOpModeFlag=(0x0).

Type (0x2)(Back color flag): cBackColorShowFlag=(0x1).

Type (0x5)(Background color value): g_wBColor=(0xC618) (0xC0C0C0).

HTCST
Cmd>ruurun 0
Cmd>ResetDevice

Please write what i need to do to run my touch; what ROM i need, where i find it and how to instal it??? When i bought this phone there was italian ROM

[CyZeeK]

Hi my htc stick on screen "SMART MOBILITY". I can get to the bootloader and there is "IPL 2.20.0002" "SPL 1.11.0000".
In MTTY:
Cmd>password BsaD5SeoA
Pass.

+ SD Controller init

- SD Controller init

+StorageInit

SDInit+++
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDInit - SD ver1.0
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
CMD55 failed
g_cKeyCardSecurityLevel = 0

HTCEType (0x1)(Operation mode flag): cOpModeFlag=(0x0).

Type (0x2)(Back color flag): cBackColorShowFlag=(0x1).

Type (0x5)(Background color value): g_wBColor=(0xC618) (0xC0C0C0).

HTCST
Cmd>ruurun 0
Cmd>ResetDevice

Please write what i need to do to run my touch; what ROM i need, where i find it and how to instal it??? When i bought this phone there was italian ROM


Do you know your Device and CID ID?

Don't you know how to get that info?

READ THIS THREAD: Elf/Elfin Original Roms Model Id & Cid Id List (http://forum.xda-developers.com/showthread.php?t=379034)

[msalgado]

Hi my htc stick on screen "SMART MOBILITY". I can get to the bootloader and ther