new HERM_Radio_Only_1.54.30.10_CustomRUU

[caxio]

new HERM_Radio_Only_1.54.30.10_CustomRUU start whit test:)

HERM_Radio_Only_1.54.30.10_CustomRUU.rar (http://rapidshare.com/files/73260236/HERM_Radio_Only_1.54.30.10_CustomRUU.rar)

[fuzzvirus]

Wiki updated.
Will test and report back:)

[dereknas]

Where did you get the radio from?

[dan1967]

invalid model id tells me after it tries 7% update.
could be for other PDA.

[dereknas]

Works fine for me. Flashed without any problems.

Now to monitor signal strength and battery life.

[dan1967]

Strange. I tried three times and one time from bootloader with same error.
Could be because of SPL 2.60? But I think I flashed other radios with it, but I don't remember.
Will investigate it and try a downgrade.

[Trezona]

Works fine for me. Flashed without any problems.

Now to monitor signal strength and battery life.

Yip! worked fine for me too!!

[dereknas]

Strange. I tried three times and one time from bootloader with same error.
Could be because of SPL 2.60? But I think I flashed other radios with it, but I don't remember.
Will investigate it and try a downgrade.

I've SPL 2.60 installed as well but it flashed without any problems. Only thing is you need to manually soft-reset your device after the upgrade reaches 100%. It is a known 'inconvenience' of the latest SPL.

[matthijs81]

Downloaded it, flashing took less time then usual. GPRS and 3G works fine on T-Mobile in the Netherlands.

Testing battery now.

[dan1967]

I've SPL 2.60 installed as well but it flashed without any problems. Only thing is you need to manually soft-reset your device after the upgrade reaches 100%. It is a known 'inconvenience' of the latest SPL.

It was not that. I simply forgot that I changed my device ID last week and had to hexedit the .nbh. accordingly.

[om-by]

new HERM_Radio_Only_1.54.30.10_CustomRUU start whit test:)

HERM_Radio_Only_1.54.30.10_CustomRUU.rar (http://rapidshare.com/files/73260236/HERM_Radio_Only_1.54.30.10_CustomRUU.rar)

From which ROM?

[caxio]

From which ROM?

extracted from:
new telstra imate RUU_Hermes_DL_UK_3.62.305.5_6275_1.54.30.10_108 (http://forum.xda-developers.com/showthread.php?t=348436)

[tasmaniandevil]

Can upload to to mirror site rather than Rapidshare?

[kipe]

..flashed to this Radio ROM, no problem with data connection (3G/HSDPA Celcom Malaysia) nor with voice connection as of now (3hrs+ usage).. now let see how this baby performs with regard to battery life.. will report back if necessary..

data speed obtained, ICS vide USB as below..

http://www.speedtest.net/result/207476005.png (http://www.speedtest.net)

TQ caxio for this...

[giovanni72]

i've flashed radio 1.54.30.10.same g and 3g signal of previous 1.54 radio...but when i go in system info...opps...all is deleted...radio version...rom version...imei...kind of processor..strange symbols or random numbers...incredible.if someone noticed the same..post it.

[echoz]

grrr... someone rapidshit this file so that everyone gets it...

http://rapidbush.dr.ag/Share.Mirror.Service/?/files/73260236/HERM_Radio_Only_1.54.30.10_CustomRUU.rar

[niftydl]

ATT - (Washington DC) - 3G

Picks up signal extremely fast, I would say faster than 1.54.07.00. GPRS is also quick, but I believe it comes with the cost of battery. Battery dropped 20% in an hour from regular browsing and couple of phone calls. This is noticeably higher than 1.47x and 1.48x radios.

[yo3gjc]

so far so good in Rogers/Fido networks, I'll come later with details, still under observation

[edward-riko]

works good on orange israel
edward

[noellenchris]

Better signal strength and 3g where I used to get strong Edge. I like it much better. I used to think that people were just making things up about one radio being better than another, however this time I can really tell the difference.

Good upgrade from 1.54.07

[chymmylt]

Anybody having any missed calls or freezing phones from this version? I ran the others 1.54's and they froze a lot and missed calls :S Had to go back to 1.51 (the most stable of the newer roms in my exp.)

[coolboyboy]

Cannot use in Hong Kong. Cannot get any GPRS signal.:confused:

[echoz]

Battery performance is quite questionable for this radio...

[kipe]

Anybody having any missed calls or freezing phones from this version? I ran the others 1.54's and they froze a lot and missed calls :S Had to go back to 1.51 (the most stable of the newer roms in my exp.)

not having that sort of problem until now (on or about 48hrs usage), ..touch wood ;)

[max414]

i've flashed radio 1.54.30.10.same g and 3g signal of previous 1.54 radio...but when i go in system info...opps...all is deleted...radio version...rom version...imei...kind of processor..strange symbols or random numbers...incredible.if someone noticed the same..post it.
Can any body confirm this???And when i was about to update it showed from schaps 4.2 to 1.00.....i was expecting it to say from schaps 4.2 to 1.54.30.10...:confused::(
Should i proceede with the upgrade

[kipe]

Can any body confirm this???And when i was about to update it showed from schaps 4.2 to 1.00.....i was expecting it to say from schaps 4.2 to 1.54.30.10...:confused::(
Should i proceede with the upgrade

ignore what is written there.. just proceed but make sure that u have done all the needful (in order to flash ROM) for the device. before proceeding so..

[KarhU]

No problems with this Radio so far. Picks up signal faster than 1.54.07.0. Battery performace seems to be the same. Overall - seems to be a keeper for me.

[influenza]

previous radio : 1.47.30.10 better than other 1.54

1.54.30.10 : no 3G connection problem, no signal drop, good GSM reception, no drop call for the moment

french SFR network

[MCSchermer]

Installed without problems. UMTS signalstregth in my office shows 1 more bar than usual. GSM at full bars like always. Stability and battery still to test. Will post if problems come up.

[Bergerac56]

No problem on Mobistar Belgium. Same "battery" life than 1.54.00. Slightly better 3G reception. I keep it for the moment

[irockash]

I had a noticable amount of dropped calls with 1.54.07, so jumped down to 1.48. Is there nyone here that likes this radio that were using 1.54.07 and getting dropped calls as well?

[randomelements]

Been using it on T-Mob UK for a couple of days now and it's pretty much the same as the last one.

[zim2dive]

What's the scoop on the "you need SPL 1.11" warning?

I'm still with Olipro 2.10. (I'm not a developer, so no previous need to move above 2.10)

I've found the Olipro 2.60 thread, and done some Wiki searching, but of course we should force folks to use version #'s that are 4 digits long, since searching for 3-character words doesn't work :)

Thanks,
Mike

[caxio]

end of my test very good whit schaps 4.1 and TIM in italy no drops call
good signal and god umts high speed is my radio for now, battery drain is same old 147.30 :D

[kipe]

end of my test very good whit schaps 4.1 and TIM in italy no drops call
good signal and god umts high speed is my radio for now, battery drain is same old 147.30 :D

agreed bro.. nice combo with schaps 4.01 at my end too, here in Malaysia (Celcom 3G/UMTS 2100)

[Prerna]

Battery performance is quite questionable for this radio...

Same issue here. Rest is fine.

[PaY87]

Is there a way to update?
My hermes always automatically restarts while updating.

I have:
Herm100
IPL-1.04
and
Herm100:
SPL-2.03

Any chances?

Regards

[Sokito]

Same issue here. Rest is fine.

same for me, . I think I am going to downgrade to 1.54.00.10 again

[joshkoss]

I had 1.54.07 prior to this and updated and all of a sudden my 8525 radio is the flakiest think around.. it loses signal all the time, I did notice when I flashed back to Schaps 4.20 it was very stable but I just flashed HCLite_3.62_Final and it became flakey again.. Seems to be something with this one. dunno! :)

[jhenzlik]

I flashed this radio yesterday from 1.54.00.10. All seems really good. I will travel across country tomorrow and will give the trusty Hermes a good workout. Will report any positive/negative findings this weekend.

Over & out!

OK...back from this trip. Wisconsin to Cincinnati to Atlanta to Palm Beach, FL. In every case the radio was very quick to grab a 3G signal. Much quicker than any other radio I've had. Very stable, clear and I only had one dropped call. The only bummer was it munched on my battery.

* BEAM set to off
* No Bluetooth
* No Wifi
* Email checks every 30 minutes

I received/made a handful of calls that lasted no more than 15 minutes. I checked & answered approx. a dozen emails. With a full battery in the morning, I was getting that "Low Battery" notification by 10PM. I really like this radio overall, I'll just have to remember to have a charging device close by.

[Olioaglio]

Flashed this radio yesterday from previous 1.50.00.00.

Seemed fine first and no dropped calls and 3G works great,
but i ran in a major issue nonetheless :eek: :eek:

2G/GPRS data connection doesn't seem to work at least
with O2 germany here. If I disable 3G and switch to GPRS only
I cannot establish a data connection.

Could anyone confirm this??

Olioaglio

[dan1967]

2G or 3G and HSDPA works fine for me in vodafone romania.

[SPSP]

2G or 3G and HSDPA works fine for me in vodafone romania.

even the EDGE?

[twinpeaks]

I had a noticable amount of dropped calls with 1.54.07, so jumped down to 1.48. Is there nyone here that likes this radio that were using 1.54.07 and getting dropped calls as well?



VERY much so - going to try this one.

[yo3gjc]

GSM only on FIdo/Rogers in GTA is perfect, no missed calls and the phone is "ringing" fast, on CDMA/UMTS when selected is eating battery fast, is more energy consuming, when WiFI enabled it drops down the signal "two units" looks like 2.4 GHz is jamming 1.9 GHZ PCS network, but is OK in 850 MHz

[jaychen]

ATT 8525 on Tmobile network in the bay area... Everything seems to work well...

[Capt Fiero]

I am going to keep my eyes on this thread, and see how this radio works in the GVRD. (Greater Vancouver Regional District) If it plays nice with Fido and Rogers I will give it a shot.

[xDaMiaNx]

I am going to keep my eyes on this thread, and see how this radio works in the GVRD. (Greater Vancouver Regional District) If it plays nice with Fido and Rogers I will give it a shot.

I'm in the GVRD as well. I'm using 1.54.07 right now on Fido. Can anyone give some info on how 1.54.30.10 is performing in Vancouver? Also, maybe post which ROM they are using it with. I'm thinking about switching to Fun_Key's 3.62 and keeping 1.54.07.

If 1.54.30.10 battery life is better, i'll switch over.

[david Vortex]

Hi.
As irockash , got a lot of missed calls, freeze with 1.54's versions.

I have even now, a SIM Unknown status, and i have to re enter pin code several times a day.

When i boot my machine (cold boot), i have sometimes "NO GSM" written instead of the radio version.

Went back to 1.51.

David.

[Guru996]

I am using it here in London on Orange anyone else in the UK on Orange tried this Radio?

I was on Radio_1.54.07.00 and generally very happy with it, apart from the battery life wasn't that good. This new one Radio_1.54.30.10 does seem a little better on performance but a little less good on battery life - very marginal.

Early days, to fair, I'll further test it.

[Walker Street]

I'm on Vodafone in Canberra Australia.
I was on Radio Version: 1.47.30.10, which came stock with the Dopod 838 pro I bought last month. Lately, most of my calls were missed calls. The phone would ring for a split second and the call was gone before I could even grab the phone.
I upgraded to this Radio version 24 hours ago. None of my calls are missed calls so far! Battery performance looks about the same (which is OK). Sound quality is the same (which is good). 3G & HSPDA internet works great.

So far so good!

Thank you Caxio. It's just brilliant to extract this from the Telstra Rom. :)

[bighouse851]

So far so good for the new radio on ATT in western Massachusetts, there is no 3G coverage where I am but I will be in an area with it next week. I will see how the new radio works with that. Also no problems with data connect on EDGE network

[themilkman]

hello, i realize this may be the wrong thread, but i am on a mac and would like to upgrade the radio to this version... i know how to upgrade ROMs but not radios... the wiki does not help Mac users like myself, can anyone help me out. I have SuperCID on my phone (did that when i unlocked it), and have been flashing the ROMs from the SD card through OK+POWER+RESET..

i guess my question is, how can i upgrade the radio without a PC?

thanks,

.milkman

[565515]

I upgraded my cingular 8525 to the new radio couple days ago, so far so good for it in China main land, Here is no 3G coverage, and no problems with 2G -GPRS and 2.5G - EDGE network connection.:)

[Bergerac56]

hello, i realize this may be the wrong thread, but i am on a mac and would like to upgrade the radio to this version... i know how to upgrade ROMs but not radios... the wiki does not help Mac users like myself, can anyone help me out. I have SuperCID on my phone (did that when i unlocked it), and have been flashing the ROMs from the SD card through OK+POWER+RESET..

i guess my question is, how can i upgrade the radio without a PC?

thanks,

.milkman

The same way you upgrade OS roms with a SD card. Just copy the nbh file on the card (formatted FAT32 and preferably empty) and rename the file hermimg.nbh. OK+Power+reset and... done (be patient a radio rom loads very slowly compared with a OS rom)

[Olioaglio]

Reflashed 1.50.00.00 to my TyTN as even after a second reflash of
1.54.30.10 again there was no chance with O2 germany to establish
a GPRS connection with this radio while 3G/UMTS connections worked
like a charm :confused: After downgrade to 1.50.00.00
all is working fine again... :cool:

Cheers, Olioaglio

[yclee]

I did a comparison with POP3 email checking on and off.

With POP3 and pushmail on, the battery drain is around 150mA.

Without POP3 but pushmail on, the battery drain is around 70-100mA.

This is about the same for other radio versions.

[bchau]

Signal is good. I live in an outer suburb in Melbourne and I usually get 2 bars 3G signal with Telstra. Now I get 3 bars most of the time. At present I am in US (San Jose) and I have 4 bars.

As for battery, I have a feeling it strains out more than 1.51 which I had previously. Don't have any objective measure for that, though.

[Guy_Incognito]

Seems to be better overall compared to 1.47. Unsure about battery life, although it usually lives on it's car charger for me anyway when I'm out and about.

I can report that the fringe reception and call quality has improved a bit - phone will now hold voice and data calls in a previously-dead spot where I sit before I head underground to work. Which is not suprising, seeing as it's Telstra's radio rom, and I'm with Telstra, so no doubt there's a bunch of little Telstra-specific tweaks to the general parameters in there to accommodate our....interesting.... cell topology.

[chymmylt]

:( Back to 1.51.00.10

I don't know if it's my hardware or if other people reset their phones more often then me but alot of these roms have issues with my phone if it's not reset like once aday. 1.51 is the only new radio rom that I've not had issues with.

The main problem is it seems the phone part of my phone crashes with these roms - I know that sounds confusing so let me explain.

Basically, I don't receive calls even though the phone claims to have perfect signal. When I go to make a call (either by hitting the green button or selecting phone from the start menu) nothing happens. I can not bring the dial pad up. No matter what I do, I can not make or receive a call until I reset the phone. Then the phone is usually ok for 24-48 hours and this happens again. This is clearly unacceptable behavior for a phone! :)

So do most people here just restart there phones every 24 hours (I know this is a tinkering forum so this is entirely possible), are you having this problem as well and just don't care or is it something with my hardware?

[Guy_Incognito]

I don't have any problem with lockups as you describe, with any radio version. With this version, phone has been on for 4 days now with numerous calls in both directions without difficulty.

Perhaps your provider has some specific "issue" that only particular rom versions deal with?

[om-by]

Perhaps your provider has some specific "issue" that only particular rom versions deal with?

Seems like every provider adapt radio to his own net-issues. Therefore T-Mobile and O2 ship ROMs with 1.50 radio, AT&T and Telstra - with 1.54, and so on.

Of course it is not prohibited to try any radio in any net :)

[themilkman]

The same way you upgrade OS roms with a SD card. Just copy the nbh file on the card (formatted FAT32 and preferably empty) and rename the file hermimg.nbh. OK+Power+reset and... done (be patient a radio rom loads very slowly compared with a OS rom)

thank you!

[chymmylt]

Seems like every provider adapt radio to his own net-issues. Therefore T-Mobile and O2 ship ROMs with 1.50 radio, AT&T and Telstra - with 1.54, and so on.

Of course it is not prohibited to try any radio in any net :)

Yet I have the problem with the AT&T (My operator) 1.54 as well. Yet at the same time, I don't have this problem at all with 1.51 - it works perfectly and I once had the phone run for a month straight without reset (The only reason I did was I changed the rom)

[om-by]

Yet I have the problem with the AT&T (My operator) 1.54 as well. Yet at the same time, I don't have this problem at all with 1.51 - it works perfectly and I once had the phone run for a month straight without reset (The only reason I did was I changed the rom)

If operator ships something - hi is responsible for quality of services... so, AT&T is responsible ONLY for officially shipped ROM + radio - not for any coocked.

[chymmylt]

If operator ships something - hi is responsible for quality of services... so, AT&T is responsible ONLY for officially shipped ROM + radio - not for any coocked.

Ofcourse I realize that. All I was saying was somebody had suggested that I might try the AT&T varriant since that was my operator and it might be an issue with the network causing my problem and I was just stating that I had tried it (along with the other variants) and the issue persist. I realize also it could be quite possible it is related to using a cooked rom but I suspect most of the people who have responded are also using a cooked rom. I have tried most of the popular roms in this forum and this problem persist through all so I don't think it's related (though I confess, I have not had a manufacture's rom since WM6 offical was first released)

[twinpeaks]

I'm having trouble with this ROM on AT&T, and with several of the other ones in the 1.5x series. At 2 bars, I may start dropping calls. Normally I can sustain a call at 2 bars.

[niftydl]

I'm having trouble with this ROM on AT&T, and with several of the other ones in the 1.5x series. At 2 bars, I may start dropping calls. Normally I can sustain a call at 2 bars.

I honestly believe this is also possibly ROM and location dependent. I am on Schaps old 4.0x rom and have not had any trouble with this radio. In fact, this radio is much better in establishing edge -> 3g connection. DC Metro/Maryland area.

[Tatchan]

Cannot use in Hong Kong. Cannot get any GPRS signal.:confused:

No problem with 3 HK at first sight, need some more days to test.

[coolboyboy]

No problem with 3 HK at first sight, need some more days to test.

Did you try to use EDGE or GPRS only?

[nanastas]

This radio seemed brutal with my Tytn on Rogers.
battery was average, but dropped and missed calls, and even bluetooth (handsfree) issues (not sure what the cause was, but it was there ONLY with this Radio Rom).
I'm back to 1.47 to see how the battery life is. Reception and 3g working great. no call issues, either.

[mck062002]

Works fine on my TyTN.

Thanks buddy!!

[rupture]

This radio seemed brutal with my Tytn on Rogers.
battery was average, but dropped and missed calls, and even bluetooth (handsfree) issues (not sure what the cause was, but it was there ONLY with this Radio Rom).
I'm back to 1.47 to see how the battery life is. Reception and 3g working great. no call issues, either.

I'm using this radio on Rogers with zero qualms! Battery life is average as you say, but I am NOT experience missed/dropped calls etc.

[Tatchan]

Did you try to use EDGE or GPRS only?

3G / HSDPA only

[debugger_HR]

works fine here in croatia, but so slow for picking up signal !!!!!
After turn on device, it has to pass more than 5 min to pick up signal (i try more than 10 time to reset device, every time same shit), but its only icon that not working, I can use phone to call or receive call, but icon still searching my GSM provider. After 5 min, everything looks normal as supposed to be

[Tatchan]

3G / HSDPA only

Also tried GPRS, everything seems ok, including battery life. 3 HK don't provide EDGE service, can't check on that.

[yclee]

No problem with 3 HK at first sight, need some more days to test.

I also use 3HK.

Battyer on UMTS cannot last 12 hours over the weekend with push mail active. 2G/GPRS is more acceptable.

[Tatchan]

I also use 3HK.

Battyer on UMTS cannot last 12 hours over the weekend with push mail active. 2G/GPRS is more acceptable.

Same as older radio(1.47 afterwards) I tried...so not much difference for me, just remember to charge whenever possible...

[Walker Street]

Hi,
I've been using this radio for over a week. I'm using schaps 4.22 Full, vodafone, Australia & am happy with reception, call quality and battery life.
:)

[yclee]

Same as older radio(1.47 afterwards) I tried...so not much difference for me, just remember to charge whenever possible...

Any recommendation on what to use for charging while on the road?

[Tatchan]

Any recommendation on what to use for charging while on the road?

1. Car charger
2. AA battery to USB charger
(ref: http://goods.ruten.com.tw/item/show?10060922394351)
3. Another piece of backup battery....

[yclee]

1. Car charger
2. AA battery to USB charger
(ref: http://goods.ruten.com.tw/item/show?10060922394351)
3. Another piece of backup battery....

Thanks for the suggestions. I bought a Energizer Energi To Go today and it seems to work ok.

[yeche]

Working fine with video call, but battery is drying very fast.
I am on Orange Israel

[sadik007]

just to say..
thank you..
it works great..

[thedeva]

Been running this for a couple of weeks now. Really happy with the performace, managing 1078kb/s download & 162kb/s upload on Telstra Next G. Battery is an issue when I'm in a poor coverage area. In town I'll get 1.5- to 2 days of moderate use. I'm in the countery at the moment (100km outside of Mildure for the Aussies) and battery warning comes up by 7pm from 100% at 8am. So looks like these things really chew up the battery trying to get a good signal.
So give it a whirl, just keep a charger handy. I got one of the Motorola USB changers which will charge my jasjam twice with one charger. Highly recommend. RRP $70AU, got mine on ebay for $25

[Wigmund]

Does this radio work fine in the UK?

[sbnajjar]

But I had to reconfigure my connections,

Thanks, definitly better signal :cool:

[WhereAlien]

Been running this for a couple of weeks now. Really happy with the performace, managing 1078kb/s download & 162kb/s upload on Telstra Next G. Battery is an issue when I'm in a poor coverage area. In town I'll get 1.5- to 2 days of moderate use. I'm in the countery at the moment (100km outside of Mildure for the Aussies) and battery warning comes up by 7pm from 100% at 8am. So looks like these things really chew up the battery trying to get a good signal.
So give it a whirl, just keep a charger handy. I got one of the Motorola USB changers which will charge my jasjam twice with one charger. Highly recommend. RRP $70AU, got mine on ebay for $25

Using this Radio for 3 weeks now in regional Queensland (Bundaberg and surrounds) on Telstra NextG and I have noticed an improvement in reception and battery life has not changed much but I am still getting about 95% of my incoming calls drop out as i try to answer manually. Via Bluetooth (Parrot and BlueAnt) it answers perfectly everytime... I think I have tried everything and it's too frustrating for words... any clues? anyone?

[samery]

Hi:

I tried this radio in Saudi Arabia. It is going fine so far, however for some reason the name of the operator has disappeared. I still see the signal strength and I can make and answer calls, but no display to the GSM carrier at all.

Did someone face this error at all? what's the solution? please advise.

Thank you.

Samer.

[marfab]

Hi:

I tried this radio in Saudi Arabia. It is going fine so far, however for some reason the name of the operator has disappeared. I still see the signal strength and I can make and answer calls, but no display to the GSM carrier at all.

Did someone face this error at all? what's the solution? please advise.

Thank you.

Samer.

I have the same problem! No operator name!:eek:

[a in yul]

i wanted to upgrade my radio but wasnt sure which version of "hardspl" i had, i think i have the latest 2.20 but the exe file says it only works with 1.11;

how can i check what version i have so that i may upgrade the radio only..?

thx

Tytn
ROM: 3.54.255.3
Date:07.05.07
Radio version:1.48.00.10
Protocol version:32.81.7020.20H
ExtRom version:3.54.255.104

[farryinn]

hi ,
I have a bootloader version spl 2.10 olip can I instal this radio on my following device info, is n e need to downgraded bootloader version befor the radio upgrade? plz advice am new here with the hermes.

regards

[TriAxisFL]

My last radio version was a 1.41, so I was due for an upgrade.
I was trying to install the AT&T 1.54 radio version for awhile, but kept getting 2.60 Errors. So I gave up and installed this version without any problems. I'm on AT&T in Deltona Florida. So far no issues. It switches between E to 3G to H,,, but all my radios have done that. Calls with a data connection work fine, and the data connection doesnt disconnect during the call. I performed a 1MB speed test on dslreports, and got 681 kbits/sec. I'll use it for awhile and see what happens.

[marfab]

I have the same problem! No operator name!:eek:

the same here!

[yutaka.rsa]

What's the scoop on the "you need SPL 1.11" warning?

I'm still with Olipro 2.10. (I'm not a developer, so no previous need to move above 2.10)

I've found the Olipro 2.60 thread, and done some Wiki searching, but of course we should force folks to use version #'s that are 4 digits long, since searching for 3-character words doesn't work :)

Thanks,
Mike

same here... should proceed?
thanks

[lagoskon]

YES . Procced without fear. I've done it 1000 times!!!!!

It is an old warning from the begining of project...

[manx]

guys... may i know what is the meaning of dropped calls?? Does it means that it suddenly cannot be reached?? i have this problem always... i need to do a sodt reset twice a day to make sure people can reach me... is this problem caused by the Radio?? My curent radio is 1.48.00.10. Please advice. Thanks. :)

[cabetoguerra]

YES . Procced without fear. I've done it 1000 times!!!!!

It is an old warning from the begining of project...

Hello you please tell me how to upgrade the radio to my htc8525, that steps should I continue or is there a tutorial to make it smooth

[Trashman]

Yet I have the problem with the AT&T (My operator) 1.54 as well. Yet at the same time, I don't have this problem at all with 1.51 - it works perfectly and I once had the phone run for a month straight without reset (The only reason I did was I changed the rom)

LOL ouch, i cant believe you trust so much on micro$oft, i dont have any kind or radio or specific rom problems but anyway i use a small app to soft-reset the phone every night just to clean shit up...and it is waaaaaaaay smaller and simpler than oxios memory that every1 uses and does kinda the same:

http://forum.xda-developers.com/showthread.php?t=273309

Sorry for the off topic, i was reading to flash to this radio and had to say something ^^

[rafyvitto]

fix my friends treo 750 with this radio, before the phone dint get any signal at all plus it drop calls like crazy

[horent135]

only problem i have is once it loses signal, it doesn't come back on until you restart the phone.

Washington DC here.

[alexbelle]

Ok people, this version of the radio is working fine.

Oragne SPV M3100
WM6 Coocked
SPL OilPro 2.10

[o_afifi]

Hi...for all..

can i upgrade my JASjam Radio Ver.1.07.03.10 to this....

My Phone Operator is Vodafone Egypt.

Thanks For Advice...pls

[alexbit]

Just flashed from 1.47.00.10.
My rom is Schap's 4.30 wwe on TyTN I.
I'm in Italy with WIND.
Feedback later....;)

[zorinass]

good and stable running !

2G/GPRS,3G/UMTS connection works fine with E+

[alexbit]

Just flashed from 1.47.00.10.
My rom is Schap's 4.30 wwe on TyTN I.
I'm in Italy with WIND.
Feedback later....;)

After two days of use all feels good...:)
This radio seems better than 1.47.00.10.
I think that it can be "my radio" :cool:

[aminhaji]

I-Mate Jasjam HERM100, WM6.1 DEV, IPL 1.04, SPL 2.10 Oli, radio version 1.43 - battery drain problems - decided to update the radio, 1.47 - Error, cant recover, device boots, message NO GSM and hangs at boot screen image (VP WM 6.1),Guess I lost the radio rom, any help appreciated.

[aminhaji]

NO HELP REQUIRED.
Fixed the problem, go to post http://wiki.xda-developers.com/index.php?pagename=Hermes_SDCardFlashing and flashed radio 1.54, WORKED FINE FOR ME.

[aminhaji]

I-mate JasJam
WM 6.1
SPL 2.10 oil
Radio 1.43
Brinked device while flashing radio 1.54 via USB (USB HUB)
Problem 2c (as discribed)
fixed brinked device following instrictions (read the RTFM) "thanks"
http://wiki.xda-developers.com/index...SDCardFlashing

[laulakh]

i have a = htc tytn and it kep freezing on the starting screen...
the only way i can turn i off is by taking the battery out but when i turn it on again i just get the starting up screen at the top it says "xdadev vanilla ROM 1.0"
i read a post that told to go to the bootloader and try installing the RUU using my SD card however i can't get to the bootloader screen. i also have tried connect the phone to the computer.
i have also tried hard reset and soft reset nothing works

is there any way of loading RUU cuz it seem like the SD and connecting through the usb doesn't work

if someone can help can you give a step by step method cuz i dont wanna do anything wrong

[pitermaikal]

Upgraded the Radio version with this one almost 2 days ago. The upgrade was a breeze (I'm on SPL 2.10 Olipro).

I've been making / receiving phone calls (1h40 duration in total so far), sending text messages & MMS and taking some pictures with the PDA since then.

No lost calls so far, the signal seems to be steady.

I haven't used the WiFi or bluetooth functions yet, but my battery (standard one) went from fully charged to 30% charge left, which is the same battery consumption I had before the upgrade (from Radio 1.48).

I do not switch the phone off at night, so this is pretty normal battery draining so far.

Unless I experience some trouble with the WiFi / bluetooth functions, I see no reason not to keep this Radio version :)

[alexbit]

After two days of use all feels good...:)
This radio seems better than 1.47.00.10.
I think that it can be "my radio" :cool:

:(
I've tested this radio for some other days and...
well I don't know if my sensation is true but it really seems that battery consuption was high and, however, signal strength isn't nothing special (comparing with version 1.47) here in my zone with wind .
Now i've flashed version 1.51.
I hope that this version will be better than 1.47 and 1.54 ;)

See you soon with update!
Ale

[pitermaikal]

2 days and 5 hours after the upgrade (with 2h15 phone calls in total, several text messages and some photos taken) I finally put it to charge, although there was still about 10% charge left it in the battery (the original, standard battery with 1.350 mAh capacity).

This seemed to be pretty much what I had before upgrading the Radio version.

Bluetooth functions are working without constraints. Still haven't used the WiFi though.

[skyplay]

Succeeded to HardSPL Version 7 following MrVanx's great great guide! The tri-color screen does show IPL-1.04 and SPL-2.10.Olipro. Then proceeded to upgrade only this radio rom (1.54.30.10), again following great MrVanx's guide. Screens shown during upgrading as normal as shown in the guide. After soft reset, however, the radio rom in my phone still shows 1.14.01.10 .

Am I lucky not to brick my radio rom (but I'm confident in the guides here in xda-developers and also MrVanx)? Or did I still miss something before I could flash this new radio rom?

[alexbit]

:(
I've tested this radio for some other days and...
well I don't know if my sensation is true but it really seems that battery consuption was high and, however, signal strength isn't nothing special (comparing with version 1.47) here in my zone with wind .
Now i've flashed version 1.51.
I hope that this version will be better than 1.47 and 1.54 ;)

See you soon with update!
Ale


After some other days of test, I can confirm that, for me, here in Italy with Wind, radio version 1.51 works better that 1.54.

Have a nice weekend!

[dudizada]

i have jasjam from cellcom israel
rom ver:CRCs r10.4
radio ver:1.16.00.00
spl:1.40.0lipro

[dudizada]

by the way spl updated to 2.60

[shortyboy]

i flashed this and im stuck with it.i cant install another radio.after flashing another radio,info still says 1.54.30.10.how do i fix this?

[dgaud007]

I upgraded from 1.54.07.00 (AT&T) 3 days ago to this one and everything is working great. Also, I now get a very low strength 3G/H icon in my office, where I have always had only Edge or no signal. So I'm keeping this one for now.

[Fragone]

This version seems to have a problem with sending SMS here ...

[Erick Dantas Rotole]

Hi!
I am trying to upgrade the radio version of my herms100 but the utility says "Please be aware that this flash is intended solely for SPL 1.11 and you must have 1.11 Hard-SPL installed in order to flash any unsigned files".

1 -As I have spl 2.10 olipro will I have problems flashing this radio?
2- Does this radio limits the provider I can use, or I will be able to use any provider I chose?
3- Any one know If this radio works fine in Brazil?

My devide
Herms100
2.10 olipro hard-spl
radio 1.16.0.0

[erwinpiero]

Weird, i didn't got those message when flashing both 1.43.30.10 and 1.56.70.11, i use Dopod 838 Pro, IPL 1.04 and off course SPL 2.10 Olipro. Becarefull my friend :)

[dgaud007]

1 -As I have spl 2.10 olipro will I have problems flashing this radio?
2- Does this radio limits the provider I can use, or I will be able to use any provider I chose?
3- Any one know If this radio works fine in Brazil?


1. You should not have problems. I've seen this message from time to time using the RUU program. Sometimes you need to push a button in the phone to confirm, when the RUU is trying to determine if HArdSPL is installed. But I hear the SD Card method is safer...
2. I used radio 1.54.30.10 (I'm using 1.56.70.11 now) in PR, Chile, Michigan and Hong Kong / China and it works.
3. I have no idea.

[jasonvxs4]

Downloaded it, flashing took less time then usual. GPRS and 3G works fine on T-Mobile in the Netherlands.

Testing battery now.

any word on battery life?

[andreasy]

I have installed this radio rom together with the new ROM from CRC 13.0. My phone freezes and then gets very hot (due to extreme radio use) and then the battery drains. Anyone had the same problem or knows if this is caused by ROM or radio rom?

[lagoskon]

I don't think its the radio . I haven't notice something like that. In fact 1.54.30.10 and 1.47.30.10 are the less power drain radios among all radios for hermes